Resources

A particle moves along the xx-axis according to the position function x(t)=t3−6.0t2+9.0t+2.0x(t) = t^3 - 6.0t^2 + 9.0t + 2.0, where xx is in meters (m\text{m}) and t≥0t \ge 0 is in seconds (s\text{s}). Identify the critical threshold time intervals during which the particle is moving in the negative xx-direction, and determine the exact boundary times tt where the instantaneous velocity vanishes (v(t)=0 m/sv(t) = 0\text{ m/s}).

Answer and steps

Final answer

Particle moves in the negative xx-direction for 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}; instantaneous velocity vanishes at the boundaries t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

Steps

01

Relate Instantaneous Velocity to Position

In one-dimensional kinematics, the instantaneous velocity v(t)v(t) is defined as the first time derivative of the position function x(t)x(t):

v(t)=dxdtv(t) = \frac{dx}{dt}

The sign of the instantaneous velocity determines the direction of motion:

  • If v(t)>0v(t) > 0, the particle moves in the positive xx-direction.
  • If v(t)<0v(t) < 0, the particle moves in the negative xx-direction.
  • If v(t)=0v(t) = 0, the particle is instantaneously at rest (turning point).

02

Differentiate the Position Function

Given the position function for t≥0t \ge 0:

x(t)=t3−6.0t2+9.0t+2.0x(t) = t^3 - 6.0t^2 + 9.0t + 2.0

Apply the power rule of differentiation ddt(tn)=ntn−1\frac{d}{dt}(t^n) = n t^{n-1} term by term:

v(t)=ddt(t3−6.0t2+9.0t+2.0)=3.0t2−12.0t+9.0v(t) = \frac{d}{dt}\left(t^3 - 6.0t^2 + 9.0t + 2.0\right) = 3.0t^2 - 12.0t + 9.0


03

Determine the Boundary Times Where Velocity Vanishes

To find where the particle changes direction or instantaneously stops, set v(t)=0v(t) = 0:

3.0t2−12.0t+9.0=03.0t^2 - 12.0t + 9.0 = 0

Factor out the common factor of 3.03.0:

3.0(t2−4.0t+3.0)=03.0(t^2 - 4.0t + 3.0) = 0

Factor the quadratic expression:

3.0(t−1.0)(t−3.0)=03.0(t - 1.0)(t - 3.0) = 0

Solving for tt gives the boundary times:

t=1.0 sandt=3.0 st = 1.0\text{ s} \quad \text{and} \quad t = 3.0\text{ s}


04

Determine the Intervals of Motion

The boundary points divide the domain t≥0t \ge 0 into three distinct test intervals:

  1. Interval 0≤t<1.0 s0 \le t < 1.0\text{ s}: Choose t=0.5 st = 0.5\text{ s}: v(0.5)=3(0.5−1.0)(0.5−3.0)=3(−0.5)(−2.5)=+3.75 m/s>0v(0.5) = 3(0.5 - 1.0)(0.5 - 3.0) = 3(-0.5)(-2.5) = +3.75\text{ m/s} > 0 The particle moves in the positive xx-direction.
  2. Interval 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}: Choose t=2.0 st = 2.0\text{ s}: v(2.0)=3(2.0−1.0)(2.0−3.0)=3(1.0)(−1.0)=−3.0 m/s<0v(2.0) = 3(2.0 - 1.0)(2.0 - 3.0) = 3(1.0)(-1.0) = -3.0\text{ m/s} < 0 Because v(t)<0v(t) < 0, the particle moves in the negative xx-direction.
  3. Interval t>3.0 st > 3.0\text{ s}: Choose t=4.0 st = 4.0\text{ s}: v(4.0)=3(4.0−1.0)(4.0−3.0)=3(3.0)(1.0)=+9.0 m/s>0v(4.0) = 3(4.0 - 1.0)(4.0 - 3.0) = 3(3.0)(1.0) = +9.0\text{ m/s} > 0 The particle moves in the positive xx-direction.

Common Pitfall to Avoid

Do not equate x(t)=0x(t) = 0 to find when the particle is stopped. Setting x(t)=0x(t) = 0 identifies when the particle passes the origin, not when its motion reverses direction. Directional changes depend solely on the sign of v(t)v(t).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses moving in the negative direction with having a negative position, setting x(t) < 0 instead of v(t) < 0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Moving in negative direction means x(t)<0  ⟹  t3−6.0t2+9.0t+2.0<0x(t) < 0 \implies t^3 - 6.0t^2 + 9.0t + 2.0 < 0

    Correct

    v(t)<0v(t) < 0

    The direction of motion is governed by the sign of instantaneous velocity v(t)=dxdtv(t) = \frac{dx}{dt}, not position x(t)x(t). A particle can move in the negative direction while still being at a positive position.

  2. Step 2

    At t=0, x=2.0; at t=4, x=−2.0  ⟹  Particle moves in negative direction for t>3.7 s\text{At } t=0,\, x=2.0;\, \text{at } t=4,\, x=-2.0 \implies \text{Particle moves in negative direction for } t > 3.7\text{ s}

    Correct

    1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}

    Because you evaluated position x(t)<0x(t) < 0, your interval reflects where the particle is to the left of the origin rather than where it travels backward (v(t)<0v(t) < 0). Testing intervals between the critical roots gives v(t)<0v(t) < 0 on (1.0 s,3.0 s)(1.0\text{ s}, 3.0\text{ s}).

  3. Step 3

    v(t)=dxdt=3.0t2−12.0t+9.0  ⟹  3.0(t−1.0)(t−3.0)=0  ⟹  t=1.0 s and t=3.0 sv(t) = \frac{dx}{dt} = 3.0t^2 - 12.0t + 9.0 \implies 3.0(t - 1.0)(t - 3.0) = 0 \implies t = 1.0\text{ s} \text{ and } t = 3.0\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the time derivative of position to obtain instantaneous velocity.

You factored the velocity quadratic correctly to identify the critical boundary times t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Position with Velocity

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused location (xx) with direction of travel (vv). Direction of motion along a coordinate axis is determined entirely by the sign of instantaneous velocity (v(t)=dx/dtv(t) = dx/dt), while x(t)x(t) indicates only the object's position relative to the origin.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction vs. Location Check
  • Moving forward/backward depends exclusively on the sign of velocity: v>0v > 0 means moving right/positive, v<0v < 0 means moving left/negative.

  • Whenever asked for direction of motion, immediately write v(t)>0v(t) > 0 or v(t)<0v(t) < 0, never x(t)x(t).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the condition for negative direction using velocity: v(t)<0v(t) < 0.

  2. Substitute the velocity function: 3.0(t−1.0)(t−3.0)<03.0(t - 1.0)(t - 3.0) < 0.

  3. Analyze the signs across the critical boundaries t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}: the product (t−1.0)(t−3.0)(t - 1.0)(t - 3.0) is negative when 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}.

Final answer

Particle moves in the negative xx-direction for 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}; instantaneous velocity vanishes at t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice testing signs of v(t)v(t) on a sign chart partitioned by the roots of v(t)=0v(t) = 0.

  • Always verify whether a question asks 'where is the particle' (xx) or 'which way is it moving' (vv).

OverviewACEpath Teacher's Diagnosis

02 The student confuses negative velocity with negative acceleration, solving a(t) < 0 instead of v(t) < 0 to find when the particle moves in the negative direction.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v(t)=3.0t2−12.0t+9.0v(t) = 3.0t^2 - 12.0t + 9.0

  2. Step 2

    Negative direction requires a(t)<0  ⟹  6.0t−12.0<0  ⟹  0 s≤t<2.0 sa(t) < 0 \implies 6.0t - 12.0 < 0 \implies 0\text{ s} \le t < 2.0\text{ s}

    Correct

    Negative direction requires v(t)<0  ⟹  3.0(t−1.0)(t−3.0)<0  ⟹  1.0 s<t<3.0 sv(t) < 0 \implies 3.0(t - 1.0)(t - 3.0) < 0 \implies 1.0\text{ s} < t < 3.0\text{ s}

    The direction of motion along a straight line is determined by the sign of velocity v(t)v(t), not acceleration a(t)a(t). Setting v(t)<0v(t) < 0 gives the interval 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}.

  3. Step 3

    v(t)=3.0t2−12.0t+9.0=0  ⟹  3.0(t−1.0)(t−3.0)=0  ⟹  t=1.0 s and t=3.0 sv(t) = 3.0t^2 - 12.0t + 9.0 = 0 \implies 3.0(t - 1.0)(t - 3.0) = 0 \implies t = 1.0\text{ s} \text{ and } t = 3.0\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the first derivative of the position function to obtain the instantaneous velocity.

You accurately solved the quadratic equation v(t)=0v(t) = 0 by factoring to find the boundary times t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Velocity and Acceleration Signs

You tested a(t)<0a(t) < 0 instead of v(t)<0v(t) < 0 when determining the direction of motion.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated acceleration with velocity, assuming that negative acceleration implies moving in the negative direction, whereas acceleration only describes how velocity changes over time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direction of Motion Rule
  • In one-dimensional kinematics, a particle moves in the positive direction when v(t)>0v(t) > 0 and in the negative direction when v(t)<0v(t) < 0.

  • Always inspect the sign of the instantaneous velocity v(t)v(t), never acceleration a(t)a(t), when asked for the direction of movement.

Role of Acceleration
  • Acceleration a(t)=dvdta(t) = \frac{dv}{dt} indicates whether velocity is increasing or decreasing, not the sign of velocity itself.

  • Use a(t)a(t) only when analyzing speeding up, slowing down, or net force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the condition for moving in the negative xx-direction: v(t)<0v(t) < 0.

  2. Substitute the factored velocity expression: 3.0(t−1.0)(t−3.0)<03.0(t - 1.0)(t - 3.0) < 0.

  3. Find where the product of (t−1.0)(t - 1.0) and (t−3.0)(t - 3.0) is negative, which occurs between the roots: 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}.

Final answer

The particle moves in the negative xx-direction for 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}, and the instantaneous velocity vanishes at t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical definitions of velocity and acceleration to reinforce that direction of motion depends strictly on velocity.

  • Practice testing sign intervals for quadratic velocity functions using test values on a number line.

OverviewACEpath Teacher's Diagnosis

03 The student factors the quadratic velocity function with reversed signs, obtaining roots of -1.0 s and -3.0 s and incorrectly deducing that velocity never vanishes for t >= 0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v(t)=3.0t2−12.0t+9.0v(t) = 3.0t^2 - 12.0t + 9.0

  2. Step 2

    v(t)=3.0(t+1.0)(t+3.0)v(t) = 3.0(t+1.0)(t+3.0)

    Correct

    v(t)=3.0(t2−4.0t+3.0)=3.0(t−1.0)(t−3.0)v(t) = 3.0(t^2 - 4.0t + 3.0) = 3.0(t - 1.0)(t - 3.0)

    When factoring t2−4.0t+3.0t^2 - 4.0t + 3.0, the two numbers must multiply to +3.0+3.0 and sum to −4.0-4.0. Those numbers are −1.0-1.0 and −3.0-3.0, so the factored form is 3.0(t−1.0)(t−3.0)3.0(t - 1.0)(t - 3.0), not 3.0(t+1.0)(t+3.0)3.0(t + 1.0)(t + 3.0).

  3. Step 3

    For t≥0,v(t)>0 always  ⟹  The particle never moves in the negative direction\text{For } t \ge 0, v(t) > 0 \text{ always} \implies \text{The particle never moves in the negative direction}

    Correct

    For 1.0 s<t<3.0 s,v(t)<0, so the particle moves in the negative x-direction.\text{For } 1.0\text{ s} < t < 3.0\text{ s}, v(t) < 0\text{, so the particle moves in the negative } x\text{-direction.}

    Because of the factoring error in Step 2, your sign analysis led to an incorrect interval. Testing t=2.0 st = 2.0\text{ s} in the correct velocity function gives v(2.0)=3.0(1.0)(−1.0)=−3.0 m/s<0v(2.0) = 3.0(1.0)(-1.0) = -3.0\text{ m/s} < 0.

  4. Step 4

    v(t)=3.0(t+1.0)(t+3.0)=0  ⟹  t=−1.0 s and t=−3.0 s  ⟹  Since t≥0,velocity never vanishesv(t) = 3.0(t+1.0)(t+3.0) = 0 \implies t = -1.0\text{ s} \text{ and } t = -3.0\text{ s} \implies \text{Since } t \ge 0, \text{velocity never vanishes}

    Correct

    3.0(t−1.0)(t−3.0)=0  ⟹  t=1.0 s and t=3.0 s3.0(t - 1.0)(t - 3.0) = 0 \implies t = 1.0\text{ s} \text{ and } t = 3.0\text{ s}

    Setting the correctly factored velocity to zero yields two valid physical times within t≥0t \ge 0: t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that instantaneous velocity is the derivative of position with respect to time.

You correctly computed the derivative using the power rule.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Factoring Sign Error

You used positive signs in the binomial factors (t+1.0)(t+3.0)(t+1.0)(t+3.0) even though the middle coefficient was negative (−4.0t-4.0t).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the relationship between the linear coefficient and the constant term when factoring quadratics: when b<0b < 0 and c>0c > 0 in t2+bt+ct^2 + bt + c, both factors must have negative constants.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sign Rule for Factoring Quadratics
  • For a quadratic t2+bt+c=(t−p)(t−q)t^2 + bt + c = (t - p)(t - q), if c>0c > 0 and b<0b < 0, both numbers pp and qq must be positive (so both binomial factors have minus signs).

  • Always expand (t±p)(t±q)(t \pm p)(t \pm q) using FOIL to verify that the middle term matches your original polynomial before solving for roots.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Factor 3.03.0 out of the velocity equation: v(t)=3.0(t2−4.0t+3.0)v(t) = 3.0(t^2 - 4.0t + 3.0).

  2. Find two numbers that multiply to +3.0+3.0 and sum to −4.0-4.0: they are −1.0-1.0 and −3.0-3.0, giving v(t)=3.0(t−1.0)(t−3.0)v(t) = 3.0(t - 1.0)(t - 3.0).

  3. Set v(t)=0v(t) = 0 to find the boundary times: t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

  4. Test points in the resulting intervals: for 0≤t<1.0 s0 \le t < 1.0\text{ s}, v(t)>0v(t) > 0; for 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}, v(t)<0v(t) < 0; for t>3.0 st > 3.0\text{ s}, v(t)>0v(t) > 0.

Final answer

Particle moves in the negative xx-direction for 1.0 s<t<3.0 s1.0\text{ s} < t < 3.0\text{ s}; instantaneous velocity vanishes at the boundaries t=1.0 st = 1.0\text{ s} and t=3.0 st = 3.0\text{ s}.

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your factored quadratic by re-expanding (t−1)(t−3)=t2−4t+3(t - 1)(t - 3) = t^2 - 4t + 3 before using the roots.

  • Plot or sketch a quick sign chart for v(t)v(t) across each interval partitioned by the roots to identify where motion is forward or backward.

Lock it in

Similar question

01

A particle moves along the xx-axis with position x(t)=2.0t2−8.0t+5.0x(t) = 2.0t^2 - 8.0t + 5.0 (for t≥0t \ge 0). Find the time interval during which the particle moves in the negative xx-direction.

Answer

0≤t<2.0 s0 \le t < 2.0\text{ s}. Velocity is v(t)=dxdt=4.0t−8.0v(t) = \frac{dx}{dt} = 4.0t - 8.0. Setting v(t)<0v(t) < 0 gives 4.0t<8.0  ⟹  t<2.0 s4.0t < 8.0 \implies t < 2.0\text{ s}.

02

The position of an object is given by x(t)=13t3−4.0tx(t) = \frac{1}{3}t^3 - 4.0t for t≥0t \ge 0. Determine when the object is simultaneously at a positive position (x>0x > 0) and moving in the negative direction (v<0v < 0).

Answer

No such time exists for t≥0t \ge 0. Velocity is v(t)=t2−4.0<0v(t) = t^2 - 4.0 < 0 for 0≤t<2.0 s0 \le t < 2.0\text{ s}. Over this interval, x(t)=t(13t2−4)≤0x(t) = t\left(\frac{1}{3}t^2 - 4\right) \le 0. Thus, x(t)x(t) is never positive while v(t)v(t) is negative.

03

A particle's position is x(t)=−t3+3.0t2+9.0t−5.0x(t) = -t^3 + 3.0t^2 + 9.0t - 5.0 for t≥0t \ge 0. Find all time intervals where the particle is moving in the negative xx-direction, and specify the turning points where v(t)=0v(t) = 0.

Answer

Moves in negative direction for t>3.0 st > 3.0\text{ s}; instantaneous velocity vanishes at t=3.0 st = 3.0\text{ s} (and t=−1.0 st = -1.0\text{ s}, which is outside the domain t≥0t \ge 0). Differentiating gives v(t)=−3.0t2+6.0t+9.0=−3.0(t−3.0)(t+1.0)v(t) = -3.0t^2 + 6.0t + 9.0 = -3.0(t - 3.0)(t + 1.0). For t≥0t \ge 0, v(t)=0v(t) = 0 at t=3.0 st = 3.0\text{ s}, and v(t)<0v(t) < 0 for t>3.0 st > 3.0\text{ s}.

Loading workspace…