Resources

In a region of space, a uniform electric field of magnitude E=480 V/mE = 480\text{ V/m} points at an angle θ\theta in the first quadrant of the xyxy-plane. Straight, parallel equipotential lines are spaced by a perpendicular distance d=2.50 cmd = 2.50\text{ cm} apart, and each successive line decreases in electric potential by ΔV=12.0 V\Delta V = 12.0\text{ V}. An external agent moves a test particle with charge q=−3.20×10−19 Cq = -3.20\times 10^{-19}\text{ C} a displacement of Δs=5.00 cm\Delta s = 5.00\text{ cm} along the positive xx-axis from x1=0 cmx_1 = 0\text{ cm} to x2=5.00 cmx_2 = 5.00\text{ cm} (with yy held constant). The electric force does work Welec=+1.92×10−18 JW_{\text{elec}} = +1.92\times 10^{-18}\text{ J} on the particle during this displacement. Determine: (a) the component of the electric field along the xx-axis, ExE_x; (b) the angle θ\theta that the electric field vector makes above the positive xx-axis; and (c) the angle ϕ\phi that the equipotential lines make relative to the positive xx-axis.

Answer and steps

Final answer

(a) Ex=−120 V/mE_x = -120\text{ V/m}; (b) θ=104.5∘\theta = 104.5^\circ (or 1.82 rad1.82\text{ rad}); (c) ϕ=14.5∘\phi = 14.5^\circ (or 194.5∘194.5^\circ)

Steps

Part (a): Determine the xx-component of the electric field, ExE_x

The work done on a charged particle by an electric force during a displacement Δs⃗\Delta \vec{s} in a uniform electric field is given by: Welec=F⃗e⋅Δs⃗=qE⃗⋅Δs⃗W_{\text{elec}} = \vec{F}_e \cdot \Delta \vec{s} = q \vec{E} \cdot \Delta \vec{s}

Since the displacement is purely along the positive xx-axis, Δs⃗=Δx ı^\Delta \vec{s} = \Delta x\,\hat{\imath}, where Δx=5.00 cm=0.0500 m\Delta x = 5.00\text{ cm} = 0.0500\text{ m}. The work equation simplifies to: Welec=qExΔxW_{\text{elec}} = q E_x \Delta x

Solving for ExE_x: Ex=WelecqΔxE_x = \frac{W_{\text{elec}}}{q \Delta x}

Substitute the given values: Ex=1.92×10−18 J(−3.20×10−19 C)(0.0500 m)=1.92×10−18 J−1.60×10−20 C⋅m=−120 V/mE_x = \frac{1.92 \times 10^{-18}\text{ J}}{(-3.20 \times 10^{-19}\text{ C})(0.0500\text{ m})} = \frac{1.92 \times 10^{-18}\text{ J}}{-1.60 \times 10^{-20}\text{ C}\cdot\text{m}} = -120\text{ V/m}

Common Pitfall: Forgetting the negative sign of the charge qq. Because the work done on the negative charge is positive, the electric force F⃗e=qE⃗\vec{F}_e = q\vec{E} acts in the +x+x-direction, which requires the electric field component ExE_x to point in the negative xx-direction.


Part (b): Determine the angle θ\theta of the electric field

The component ExE_x of a vector E⃗\vec{E} of magnitude EE oriented at an angle θ\theta counterclockwise from the positive xx-axis is: Ex=Ecos⁡θE_x = E \cos\theta

Rearranging for cos⁡θ\cos\theta: cos⁡θ=ExE=−120 V/m480 V/m=−0.250\cos\theta = \frac{E_x}{E} = \frac{-120\text{ V/m}}{480\text{ V/m}} = -0.250

Evaluating the inverse cosine: θ=arccos⁡(−0.250)≈104.5∘ (or 1.82 rad)\theta = \arccos(-0.250) \approx 104.5^\circ \text{ (or } 1.82\text{ rad)}

Thus, the electric field vector is directed into the second quadrant, at 104.5∘104.5^\circ relative to the positive xx-axis.


Part (c): Determine the angle ϕ\phi of the equipotential lines

Equipotential lines are always everywhere perpendicular to the electric field lines. Since electric field lines point in the direction of maximum potential decrease at an angle of θ=104.5∘\theta = 104.5^\circ, the equipotential lines lie at an angle perpendicular to E⃗\vec{E}: ϕ=θ±90∘\phi = \theta \pm 90^\circ

Calculating the principal acute angle relative to the positive xx-axis: ϕ=104.5∘−90∘=14.5∘\phi = 104.5^\circ - 90^\circ = 14.5^\circ

The opposite direction along the line is: ϕ=104.5∘+90∘=194.5∘\phi = 104.5^\circ + 90^\circ = 194.5^\circ

Therefore, the equipotential lines make an angle of ϕ=14.5∘\phi = 14.5^\circ (or 194.5∘194.5^\circ) with respect to the positive xx-axis.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student omits the negative sign of the test charge when calculating the electric field component from work, resulting in a positive x-component and an acute field angle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Welec=q⋅Ex⋅Δs  ⟹  1.92×10−18=(3.20×10−19)⋅Ex⋅(0.0500)  ⟹  Ex=1.92×10−181.60×10−20=+120 V/mW_{\text{elec}} = q \cdot E_x \cdot \Delta s \implies 1.92 \times 10^{-18} = (3.20 \times 10^{-19}) \cdot E_x \cdot (0.0500) \implies E_x = \frac{1.92 \times 10^{-18}}{1.60 \times 10^{-20}} = +120\text{ V/m}

    Correct

    Ex=Welecq Δx=1.92×10−18 J(−3.20×10−19 C)(0.0500 m)=−120 V/mE_x = \frac{W_{\text{elec}}}{q\,\Delta x} = \frac{1.92 \times 10^{-18}\text{ J}}{(-3.20 \times 10^{-19}\text{ C})(0.0500\text{ m})} = -120\text{ V/m}

    You correctly related the work done by the field to the displacement along the xx-axis, but you substituted q=+3.20×10−19 Cq = +3.20 \times 10^{-19}\text{ C} instead of the given negative charge q=−3.20×10−19 Cq = -3.20 \times 10^{-19}\text{ C}. Because positive work was done on a negative charge moving in the +x+x-direction, the electric force is in the +x+x-direction, meaning the electric field component must point in the −x-x-direction (Ex=−120 V/mE_x = -120\text{ V/m}).

  2. Step 2

    cos⁡(θ)=ExE=120480=0.250  ⟹  θ=arccos⁡(0.250)=75.5∘\cos(\theta) = \frac{E_x}{E} = \frac{120}{480} = 0.250 \implies \theta = \arccos(0.250) = 75.5^\circ

    Correct

    cos⁡θ=ExE=−120 V/m480 V/m=−0.250  ⟹  θ=arccos⁡(−0.250)≈104.5∘\cos\theta = \frac{E_x}{E} = \frac{-120\text{ V/m}}{480\text{ V/m}} = -0.250 \implies \theta = \arccos(-0.250) \approx 104.5^\circ

    Your vector component formulation cos⁡θ=Ex/E\cos\theta = E_x / E is completely sound, but substituting the incorrect positive value Ex=+120 V/mE_x = +120\text{ V/m} resulted in θ=75.5∘\theta = 75.5^\circ instead of θ=104.5∘\theta = 104.5^\circ.

  3. Step 3

    Equipotential lines are perpendicular to E-field lines.  ⟹  ϕ=θ+90∘=75.5∘+90∘=165.5∘\text{Equipotential lines are perpendicular to E-field lines.} \implies \phi = \theta + 90^\circ = 75.5^\circ + 90^\circ = 165.5^\circ

    Correct

    ϕ=θ±90∘=104.5∘−90∘=14.5∘(or 104.5∘+90∘=194.5∘)\phi = \theta \pm 90^\circ = 104.5^\circ - 90^\circ = 14.5^\circ \quad (\text{or } 104.5^\circ + 90^\circ = 194.5^\circ)

    You correctly recognized that equipotential lines are perpendicular to electric field lines, but your calculation used the upstream value θ=75.5∘\theta = 75.5^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the work formula for a uniform electric field, Welec=qExΔxW_{\text{elec}} = q E_x \Delta x.

You correctly related the field component to the direction angle via cos⁡θ=Ex/E\cos\theta = E_x / E.

You correctly identified the geometric rule that equipotential lines are everywhere perpendicular to electric field lines.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Test Charge

You dropped the negative sign on the test charge q=−3.20×10−19 Cq = -3.20 \times 10^{-19}\text{ C} when substituting it into the work equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating charge magnitude rather than algebraic signed charge in the work equation W=qE⃗⋅Δs⃗W = q\vec{E}\cdot\Delta\vec{s}. In electrostatics, the sign of qq determines whether force and field point in the same or opposite directions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Algebraic Charge in Work Calculations
  • The electric force is F⃗e=qE⃗\vec{F}_e = q\vec{E}, so Welec=qE⃗⋅Δr⃗W_{\text{elec}} = q\vec{E}\cdot\Delta\vec{r}. The charge qq must include its algebraic sign.

  • Always write parentheses with the explicit algebraic sign, such as (−3.20×10−19 C)(-3.20 \times 10^{-19}\text{ C}), before multiplying.

Physical Direction Check
  • If positive work is done (W>0W > 0) along a positive displacement (Δx>0\Delta x > 0), the electric force must point in the positive direction (Fx>0F_x > 0).

  • Since F⃗e=qE⃗\vec{F}_e = q\vec{E} and q<0q < 0, E⃗\vec{E} must point opposite to F⃗e\vec{F}_e, meaning Ex<0E_x < 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute q=−3.20×10−19 Cq = -3.20 \times 10^{-19}\text{ C} into Ex=Welecq ΔxE_x = \frac{W_{\text{elec}}}{q\,\Delta x} to find Ex=−120 V/mE_x = -120\text{ V/m}.

  2. Calculate cos⁡θ=ExE=−120480=−0.250\cos\theta = \frac{E_x}{E} = \frac{-120}{480} = -0.250, giving θ=arccos⁡(−0.250)≈104.5∘\theta = \arccos(-0.250) \approx 104.5^\circ.

  3. Find the equipotential line orientation by adding/subtracting 90∘90^\circ: ϕ=104.5∘−90∘=14.5∘\phi = 104.5^\circ - 90^\circ = 14.5^\circ (or 194.5∘194.5^\circ).

Final answer

(a) Ex=−120 V/mE_x = -120\text{ V/m}; (b) θ=104.5∘\theta = 104.5^\circ; (c) ϕ=14.5∘\phi = 14.5^\circ (or 194.5∘194.5^\circ)

NEXT STEPS
Final Takeaways from Your Teacher
  • Pay special attention to the algebraic sign of charges when computing work or electric potential energy.

  • Check that your resulting vector angle θ\theta matches the signs of its components (negative xx-component means an obtuse angle in the xyxy-plane).

  • Practice using the perpendicular condition ϕ=θ±90∘\phi = \theta \pm 90^\circ to find the principal angle of equipotential lines.

OverviewACEpath Teacher's Diagnosis

02 The student assumes equipotential lines lie parallel to the electric field vector rather than perpendicular to it, setting the equipotential angle equal to the field angle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Welec=qEx⋅Δs  ⟹  1.92×10−18=(−3.20×10−19)⋅Ex⋅(0.0500)  ⟹  Ex=−120 V/mW_{\text{elec}} = q E_x \cdot \Delta s \implies 1.92 \times 10^{-18} = (-3.20 \times 10^{-19}) \cdot E_x \cdot (0.0500) \implies E_x = -120\text{ V/m}

  2. Step 2

    cos⁡(θ)=ExE=−120480=−0.250  ⟹  θ=arccos⁡(−0.250)=104.5∘\cos(\theta) = \frac{E_x}{E} = \frac{-120}{480} = -0.250 \implies \theta = \arccos(-0.250) = 104.5^\circ

  3. Step 3

    Equipotential lines run parallel to the electric field lines.  ⟹  ϕ=θ=104.5∘\text{Equipotential lines run parallel to the electric field lines.} \implies \phi = \theta = 104.5^\circ

    Correct

    ϕ=θ±90∘=104.5∘−90∘=14.5∘ (or 194.5∘)\phi = \theta \pm 90^\circ = 104.5^\circ - 90^\circ = 14.5^\circ \text{ (or } 194.5^\circ\text{)}

    Equipotential lines are always perpendicular to electric field lines, not parallel. Moving along an equipotential line requires zero work, meaning E⃗⋅ds⃗=0\vec{E} \cdot d\vec{s} = 0, so E⃗⊥ds⃗\vec{E} \perp d\vec{s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the work-energy relation Welec=qExΔxW_{\text{elec}} = q E_x \Delta x while preserving the negative charge sign.

You correctly solved for the field direction angle using cos⁡θ=Ex/E\cos\theta = E_x / E.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equipotential Orientation Misconception

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that equipotential lines run parallel to electric field lines rather than perpendicular to them. Because electric potential does not change along an equipotential surface (dV=−E⃗⋅ds⃗=0dV = -\vec{E} \cdot d\vec{s} = 0), any displacement along the line must be orthogonal to the electric field vector.

REASONING PATH
Your ACEpath teacher’s suggested approach
Orthogonality of Equipotentials and Field Lines
  • Electric field lines always cross equipotential lines at right angles (90∘90^\circ).

  • When given the angle θ\theta of the electric field, find the angle of the equipotential line using ϕ=θ±90∘\phi = \theta \pm 90^\circ.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that no work is done when moving along an equipotential line: dW=−q dV=qE⃗⋅ds⃗=0dW = -q\,dV = q\vec{E} \cdot d\vec{s} = 0.

  2. Because E⃗⋅ds⃗=E dscos⁡(90∘)=0\vec{E} \cdot d\vec{s} = E\,ds\cos(90^\circ) = 0, the equipotential lines must be oriented perpendicular to E⃗\vec{E}.

  3. Subtract 90∘90^\circ from the field angle: ϕ=104.5∘−90∘=14.5∘\phi = 104.5^\circ - 90^\circ = 14.5^\circ (or ϕ=104.5∘+90∘=194.5∘\phi = 104.5^\circ + 90^\circ = 194.5^\circ).

Final answer

(a) Ex=−120 V/mE_x = -120\text{ V/m}; (b) θ=104.5∘\theta = 104.5^\circ; (c) ϕ=14.5∘\phi = 14.5^\circ (or 194.5∘194.5^\circ)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why ΔV=−∫E⃗⋅ds⃗\Delta V = -\int \vec{E} \cdot d\vec{s} forces E⃗\vec{E} to be orthogonal to surfaces of constant VV.

  • Practice sketching equipotential contours and electric field vectors on a 2D grid to build visual intuition.

OverviewACEpath Teacher's Diagnosis

03 The student ignores the negative sign of the x-component when finding the field angle, taking arccos of the absolute value and placing the field in the wrong quadrant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Welec=Fx⋅Δx=q⋅Ex⋅Δx  ⟹  Ex=Welecq⋅Δx=1.92×10−18(−3.20×10−19)(0.0500)  ⟹  Ex=−120 V/mW_{\text{elec}} = F_x \cdot \Delta x = q \cdot E_x \cdot \Delta x \implies E_x = \frac{W_{\text{elec}}}{q \cdot \Delta x} = \frac{1.92 \times 10^{-18}}{(-3.20 \times 10^{-19})(0.0500)} \implies E_x = -120\text{ V/m}

  2. Step 2

    cos⁡(θ)=∣Ex∣E=120480=0.250  ⟹  θ=arccos⁡(0.250)=75.5∘\cos(\theta) = \frac{|E_x|}{E} = \frac{120}{480} = 0.250 \implies \theta = \arccos(0.250) = 75.5^\circ

    Correct

    cos⁡θ=ExE=−120 V/m480 V/m=−0.250  ⟹  θ=arccos⁡(−0.250)≈104.5∘\cos\theta = \frac{E_x}{E} = \frac{-120\text{ V/m}}{480\text{ V/m}} = -0.250 \implies \theta = \arccos(-0.250) \approx 104.5^\circ

    You used ∣Ex∣|E_x| instead of the signed component ExE_x. Because Ex=Ecos⁡θE_x = E\cos\theta, a negative xx-component means cos⁡θ<0\cos\theta < 0, placing the angle in the second quadrant (theta=104.5∘\\theta = 104.5^\circ) rather than the acute reference angle (75.5∘75.5^\circ).

  3. Step 3

    Equipotential lines are perpendicular to the field.  ⟹  ϕ=75.5∘−90∘=−14.5∘ (or 165.5∘)\text{Equipotential lines are perpendicular to the field.} \implies \phi = 75.5^\circ - 90^\circ = -14.5^\circ\text{ (or } 165.5^\circ)

    Correct

    ϕ=θ−90∘=104.5∘−90∘=14.5∘ (or 194.5∘)\phi = \theta - 90^\circ = 104.5^\circ - 90^\circ = 14.5^\circ\text{ (or } 194.5^\circ)

    Your geometric reasoning that equipotential lines are perpendicular to the field lines is correct, but using the incorrect field angle θ=75.5∘\theta = 75.5^\circ produced an incorrect angle ϕ\phi.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related the work done by the electric force to the displacement and charge: Welec=qExΔxW_{\text{elec}} = q E_x \Delta x.

You properly preserved the negative sign of the charge q=−3.20×10−19 Cq = -3.20 \times 10^{-19}\text{ C} to find Ex=−120 V/mE_x = -120\text{ V/m}.

You correctly identified that equipotential lines are perpendicular to electric field lines.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Vector Component Projection

You dropped the negative sign on ExE_x by taking ∣Ex∣|E_x| when computing cos⁡θ\cos\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating a vector's signed Cartesian component with its positive scalar magnitude when applying the standard direction formula Ex=Ecos⁡θE_x = E\cos\theta.

REASONING PATH
Your ACEpath teacher’s suggested approach
Signed Component Direction Rule
  • For any vector A⃗\vec{A} of magnitude AA oriented at counterclockwise angle θ\theta from the +x+x-axis, cos⁡θ=Ax/A\cos\theta = A_x / A, where AxA_x retains its algebraic sign.

  • Keep the negative sign when solving for cos⁡θ\cos\theta: if Ax<0A_x < 0, then cos⁡θ<0\cos\theta < 0, which yields θ\theta in the second quadrant (90∘<θ<180∘90^\circ < \theta < 180^\circ).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the signed component in the projection formula: cos⁡θ=ExE=−120 V/m480 V/m=−0.250\cos\theta = \frac{E_x}{E} = \frac{-120\text{ V/m}}{480\text{ V/m}} = -0.250.

  2. Evaluate the inverse cosine over [0∘,180∘][0^\circ, 180^\circ]: θ=arccos⁡(−0.250)≈104.5∘\theta = \arccos(-0.250) \approx 104.5^\circ.

  3. Find the equipotential line direction perpendicular to E⃗\vec{E}: ϕ=θ−90∘=104.5∘−90∘=14.5∘\phi = \theta - 90^\circ = 104.5^\circ - 90^\circ = 14.5^\circ (or 14.5∘+180∘=194.5∘14.5^\circ + 180^\circ = 194.5^\circ).

Final answer

(a) Ex=−120 V/mE_x = -120\text{ V/m}; (b) θ=104.5∘\theta = 104.5^\circ; (c) ϕ=14.5∘\phi = 14.5^\circ (or 194.5∘194.5^\circ)

NEXT STEPS
Final Takeaways from Your Teacher
  • Always keep vector components signed when finding standard direction angles with cos⁡θ=Ex/E\cos\theta = E_x / E.

  • Check the quadrant of your calculated angle against the signs of the components (Ex<0E_x < 0 requires θ\theta in Quadrant II or III).

Lock it in

Similar question

01

A particle with charge q=−1.60×10−19 Cq = -1.60 \times 10^{-19}\text{ C} moves Δx=0.040 m\Delta x = 0.040\text{ m} along the positive xx-axis in a uniform electric field. The electric force does work W=−6.40×10−19 JW = -6.40 \times 10^{-19}\text{ J}. Find ExE_x.

Answer

Ex=+100 V/mE_x = +100\text{ V/m}. Key step: Ex=WqΔx=−6.40×10−19 J(−1.60×10−19 C)(0.040 m)=+100 V/mE_x = \frac{W}{q\Delta x} = \frac{-6.40 \times 10^{-19}\text{ J}}{(-1.60 \times 10^{-19}\text{ C})(0.040\text{ m})} = +100\text{ V/m}.

02

A uniform electric field of magnitude E=200 V/mE = 200\text{ V/m} does positive work W=+4.00×10−18 JW = +4.00 \times 10^{-18}\text{ J} on a charge q=−2.00×10−19 Cq = -2.00 \times 10^{-19}\text{ C} over a displacement Δx=0.100 m\Delta x = 0.100\text{ m} along the +x+x-axis. Determine the angle θ\theta of E⃗\vec{E} relative to the positive xx-axis, assuming Ey>0E_y > 0.

Answer

θ=180∘\theta = 180^\circ (or exactly in the −x-x direction if purely 1D), but specifically: Ex=4.00×10−18(−2.00×10−19)(0.100)=−200 V/mE_x = \frac{4.00\times 10^{-18}}{(-2.00\times 10^{-19})(0.100)} = -200\text{ V/m}. Then cos⁡θ=ExE=−200200=−1.00\cos\theta = \frac{E_x}{E} = \frac{-200}{200} = -1.00, so θ=180∘\theta = 180^\circ.

03

In the xyxy-plane, parallel equipotential lines make an angle of 25∘25^\circ relative to the +x+x-axis, with potential decreasing in the direction of the second quadrant. Find the unit vector direction u^E\hat{u}_E of the electric field.

Answer

u^E=(cos⁡115∘)ı^+(sin⁡115∘)ȷ^≈−0.423ı^+0.906ȷ^\hat{u}_E = (\cos 115^\circ)\hat{\imath} + (\sin 115^\circ)\hat{\jmath} \approx -0.423\hat{\imath} + 0.906\hat{\jmath}. Key step: E⃗\vec{E} is perpendicular to equipotentials and points toward decreasing potential, so θ=25∘+90∘=115∘\theta = 25^\circ + 90^\circ = 115^\circ.

Loading workspace…