Resources

A monochromatic laser beam of wavelength λ=589 nm\lambda = 589\text{ nm} is directed through two slits spaced d=0.150 mmd = 0.150\text{ mm} apart, producing an interference pattern on a screen located L=1.80 mL = 1.80\text{ m} away in air. A thin, transparent polystyrene sheet with refractive index n=1.59n = 1.59 and thickness t=3.60 μmt = 3.60\,\mu\text{m} is then placed directly over one of the slits, introducing an extra optical path length. Calculate the resulting lateral shift Δy\Delta y (in centimeters) of the central fringe (m=0m = 0) along the screen.

Answer and steps

Final answer

2.55 cm2.55\text{ cm}

Steps

01

Identify the Optical Path Difference Introduced by the Sheet

When light travels a distance tt through a medium of refractive index nn, its optical path length is ntn t. In the absence of the sheet, the light travels through air with a refractive index of approximately 11, giving an optical path length of 1⋅t1 \cdot t.

Placing the sheet of thickness tt over one slit introduces an additional optical path length (ΔOPL\Delta \text{OPL}) to that beam: ΔOPL=(n−1)t\Delta \text{OPL} = (n - 1)t

02

Relate Optical Path Difference to Fringe Shift

The central maximum (m=0m = 0) occurs where the net path difference between the waves from the two slits is zero.

Because the beam passing through the sheet is delayed, the central maximum must shift toward that slit so that the geometric path from the other slit is longer by the exact same amount. For a small displacement Δy\Delta y on a distant screen at distance LL, the geometric path difference is: ΔLgeom=d⋅ΔyL\Delta L_{\text{geom}} = \frac{d \cdot \Delta y}{L}

Equating the geometric path difference to the additional optical path difference: d⋅ΔyL=(n−1)t\frac{d \cdot \Delta y}{L} = (n - 1)t

Solving for the lateral shift Δy\Delta y: Δy=L(n−1)td\Delta y = \frac{L(n - 1)t}{d}

Common Pitfall: The shift in position depends on the optical path difference (n−1)t(n-1)t, not on the wavelength λ\lambda. While the fringe spacing Δyfringe=λLd\Delta y_{\text{fringe}} = \frac{\lambda L}{d} depends on λ\lambda, the overall position of the central fringe itself is independent of λ\lambda.

03

Calculate the Shift

Convert all given values into standard SI units:

  • Slit separation: d=0.150 mm=1.50×10−4 md = 0.150\text{ mm} = 1.50 \times 10^{-4}\text{ m}
  • Screen distance: L=1.80 mL = 1.80\text{ m}
  • Sheet thickness: t=3.60 μm=3.60×10−6 mt = 3.60\,\mu\text{m} = 3.60 \times 10^{-6}\text{ m}
  • Refractive index: n=1.59n = 1.59

Substitute these values into the shift equation: Δy=1.80 m⋅(1.59−1)⋅(3.60×10−6 m)1.50×10−4 m\Delta y = \frac{1.80\text{ m} \cdot (1.59 - 1) \cdot (3.60 \times 10^{-6}\text{ m})}{1.50 \times 10^{-4}\text{ m}}

Δy=1.80⋅0.59⋅3.60×10−61.50×10−4 m=3.8232×10−61.50×10−4 m=2.5488×10−2 m\Delta y = \frac{1.80 \cdot 0.59 \cdot 3.60 \times 10^{-6}}{1.50 \times 10^{-4}}\text{ m} = \frac{3.8232 \times 10^{-6}}{1.50 \times 10^{-4}}\text{ m} = 2.5488 \times 10^{-2}\text{ m}

Convert to centimeters and round to three significant figures: Δy≈2.55 cm\Delta y \approx 2.55\text{ cm}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the total optical path in the film nt instead of the extra optical path difference (n - 1)t, forgetting to subtract the displaced air path.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δp=n⋅t\Delta p = n \cdot t

    Correct

    Δp=(n−1)t\Delta p = (n - 1)t

    When the sheet of thickness tt is inserted, it replaces a thickness tt of air (nair≈1n_{\text{air}} \approx 1). The net increase in optical path length is therefore (n−nair)t=(n−1)t(n - n_{\text{air}})t = (n - 1)t, rather than the total optical path ntnt.

  2. Step 2

    d⋅ΔyL=n⋅t  ⟹  Δy=L⋅n⋅td\frac{d \cdot \Delta y}{L} = n \cdot t \implies \Delta y = \frac{L \cdot n \cdot t}{d}

    Correct

    d⋅ΔyL=(n−1)t  ⟹  Δy=L(n−1)td\frac{d \cdot \Delta y}{L} = (n - 1)t \implies \Delta y = \frac{L(n - 1)t}{d}

    Your algebraic setup and rearrangement to isolate Δy\Delta y are completely sound, but this step carries forward the missing (n−1)(n - 1) factor from the previous step.

  3. Step 3

    Δy=(1.80)(1.59)(3.60×10−6)0.150×10−3  ⟹  Δy=0.0687 m=6.87 cm\Delta y = \frac{(1.80)(1.59)(3.60 \times 10^{-6})}{0.150 \times 10^{-3}} \implies \Delta y = 0.0687\text{ m} = 6.87\text{ cm}

    Correct

    Δy=(1.80)(1.59−1)(3.60×10−6)0.150×10−3≈0.0255 m=2.55 cm\Delta y = \frac{(1.80)(1.59 - 1)(3.60 \times 10^{-6})}{0.150 \times 10^{-3}} \approx 0.0255\text{ m} = 2.55\text{ cm}

    You converted all numerical quantities to SI units correctly and calculated accurately, but the resulting value is larger than the true shift because it used 1.591.59 instead of 0.590.59.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the geometric path difference on the screen must compensate for the extra optical path introduced at the slit.

You used the correct geometric approximation d⋅ΔyL\frac{d \cdot \Delta y}{L} for a screen far from the slits.

You handled metric prefix conversions for millimeters, micrometers, and centimeters accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing reference medium in optical path difference

You wrote ntnt as the path difference instead of subtracting the original air path 1⋅t1 \cdot t.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute optical path length (OPL=nt\text{OPL} = nt) of light traveling through a slab with the net optical path difference (ΔOPD=(n−nmedium)t\Delta\text{OPD} = (n - n_{\text{medium}})t) introduced when replacing a section of the ambient medium.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for the Displaced Medium
  • Placing a slab of thickness tt in a medium with index n0n_0 replaces a segment of path length tt that previously had refractive index n0n_0.

  • Always write the added optical path difference as ΔOPD=(n−n0)t\Delta\text{OPD} = (n - n_0)t. When the experiment is in air (n0≈1n_0 \approx 1), this becomes (n−1)t(n - 1)t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the net optical path difference introduced by replacing air with the sheet: ΔOPD=(n−1)t=(1.59−1)(3.60×10−6 m)=2.124×10−6 m\Delta\text{OPD} = (n - 1)t = (1.59 - 1)(3.60 \times 10^{-6}\text{ m}) = 2.124 \times 10^{-6}\text{ m}.

  2. Equate this to the geometric path difference d⋅ΔyL=(n−1)t\frac{d \cdot \Delta y}{L} = (n - 1)t.

  3. Solve for the lateral shift: Δy=L(n−1)td=(1.80 m)(2.124×10−6 m)1.50×10−4 m=2.5488×10−2 m\Delta y = \frac{L(n - 1)t}{d} = \frac{(1.80\text{ m})(2.124 \times 10^{-6}\text{ m})}{1.50 \times 10^{-4}\text{ m}} = 2.5488 \times 10^{-2}\text{ m}.

Final answer

Δy≈2.55 cm\Delta y \approx 2.55\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between absolute optical path length (ntnt) and optical path difference relative to the surrounding medium ((n−n0)t(n - n_0)t).

  • Practice problems where thin plates are placed in liquids or different media to reinforce using (nplate−nmedium)t(n_{\text{plate}} - n_{\text{medium}})t.

OverviewACEpath Teacher's Diagnosis

02 The student incorrectly multiplies the slit spacing by the shift distance and divides by L in the geometric path relation, using L·Δy / d instead of d·Δy / L.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δp=(n−1)t=(1.59−1)(3.60×10−6 m)=2.124×10−6 m\Delta p = (n-1)t = (1.59-1)(3.60 \times 10^{-6}\text{ m}) = 2.124 \times 10^{-6}\text{ m}

  2. Step 2

    Path difference=L⋅Δyd\text{Path difference} = \frac{L \cdot \Delta y}{d}

    Correct

    ΔLgeom=dsin⁡θ≈d⋅ΔyL\Delta L_{\text{geom}} = d \sin\theta \approx \frac{d \cdot \Delta y}{L}

    You inverted the positions of dd and LL. The geometric path difference for two slits separated by distance dd at an angle θ≈ΔyL\theta \approx \frac{\Delta y}{L} is dsin⁡θ≈d⋅ΔyLd \sin\theta \approx \frac{d \cdot \Delta y}{L}.

  3. Step 3

    L⋅Δyd=(n−1)t  ⟹  Δy=d(n−1)tL\frac{L \cdot \Delta y}{d} = (n-1)t \implies \Delta y = \frac{d(n-1)t}{L}

    Correct

    d⋅ΔyL=(n−1)t  ⟹  Δy=L(n−1)td\frac{d \cdot \Delta y}{L} = (n-1)t \implies \Delta y = \frac{L(n-1)t}{d}

    Your algebraic isolation of Δy\Delta y followed logically from your previous expression, but it carries forward the inverted geometry formula.

  4. Step 4

    Δy=(0.150×10−3)(2.124×10−6)1.80=1.77×10−10 m=1.77×10−8 cm\Delta y = \frac{(0.150 \times 10^{-3})(2.124 \times 10^{-6})}{1.80} = 1.77 \times 10^{-10}\text{ m} = 1.77 \times 10^{-8}\text{ cm}

    Correct

    Δy=1.80⋅2.124×10−61.50×10−4=2.5488×10−2 m≈2.55 cm\Delta y = \frac{1.80 \cdot 2.124 \times 10^{-6}}{1.50 \times 10^{-4}} = 2.5488 \times 10^{-2}\text{ m} \approx 2.55\text{ cm}

    Your numerical evaluation used the inverted formula, leading to an incorrect final shift.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula Δp=(n−1)t\Delta p = (n-1)t to find the optical path delay caused by the thin sheet.

You correctly converted the thickness from micrometers to meters.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted geometric path relation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the geometric relation for path difference in double-slit interference, writing LΔyd\frac{L \Delta y}{d} instead of dsin⁡θ≈dΔyLd \sin\theta \approx \frac{d \Delta y}{L}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Double-Slit Geometric Path Difference
  • For slit separation dd and screen distance LL, the geometric path difference to a point at position yy is Δr=dsin⁡θ≈dyL\Delta r = d\sin\theta \approx \frac{d y}{L}.

  • Always recall that the extra path travels between the two slits, so it scales with slit separation dd, giving Δr=d(yL)\Delta r = d \left(\frac{y}{L}\right).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the geometric path difference equal to the optical path difference: d⋅ΔyL=(n−1)t\frac{d \cdot \Delta y}{L} = (n-1)t.

  2. Solve for the lateral shift: Δy=L(n−1)td\Delta y = \frac{L(n-1)t}{d}.

  3. Substitute the given values: Δy=(1.80 m)(2.124×10−6 m)1.50×10−4 m=0.025488 m\Delta y = \frac{(1.80\text{ m})(2.124 \times 10^{-6}\text{ m})}{1.50 \times 10^{-4}\text{ m}} = 0.025488\text{ m}.

  4. Convert to centimeters: 0.025488 m=2.55 cm0.025488\text{ m} = 2.55\text{ cm}.

Final answer

2.55 cm2.55\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometry of Young's double-slit experiment to reinforce why the path difference is dsin⁡θ≈dyLd\sin\theta \approx \frac{d y}{L}.

  • Perform dimensional and proportional reasoning checks: moving the screen farther away (LL increases) should spread the pattern out, meaning Δy\Delta y must be directly proportional to LL.

OverviewACEpath Teacher's Diagnosis

03 The student misinterprets the question as finding the number of fringe shifts m and omits multiplying by the fringe width, stating the shift as a dimensionless fringe count.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δp=(n−1)t=(0.59)(3.60×10−6 m)=2.124×10−6 m\Delta p = (n-1)t = (0.59)(3.60 \times 10^{-6}\text{ m}) = 2.124 \times 10^{-6}\text{ m}

  2. Step 2

    m=Δpλ=2.124×10−6589×10−9=3.61m = \frac{\Delta p}{\lambda} = \frac{2.124 \times 10^{-6}}{589 \times 10^{-9}} = 3.61

  3. Step 3

    Δy=3.61 cm\Delta y = 3.61\text{ cm}

    Correct

    Δy=m⋅λLd=LΔpd≈2.55 cm\Delta y = m \cdot \frac{\lambda L}{d} = \frac{L \Delta p}{d} \approx 2.55\text{ cm}

    The value m=3.61m = 3.61 is a dimensionless number of fringes, not a linear distance. To find the physical displacement Δy\Delta y on the screen, you need to multiply mm by the fringe spacing Δyfringe=λLd\Delta y_{\text{fringe}} = \frac{\lambda L}{d}, or relate path difference directly via dΔyL=Δp\frac{d \Delta y}{L} = \Delta p.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a transparent sheet of thickness tt introduces an optical path difference of (n−1)t(n - 1)t.

You accurately computed the numerical path difference Δp=2.124×10−6 m\Delta p = 2.124 \times 10^{-6}\text{ m}.

You correctly related the path difference to the shift measured in fringe units m=Δpλm = \frac{\Delta p}{\lambda}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Fringe Count with Spatial Displacement

You assigned the unit cm\text{cm} directly to the dimensionless fringe shift m=3.61m = 3.61.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the dimensionless number of fringes shifted (mm) with the spatial displacement on the observation screen (Δy\Delta y), omitting the conversion factor of fringe spacing Δyfringe=λLd\Delta y_{\text{fringe}} = \frac{\lambda L}{d}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Differentiate Count from Distance
  • The fringe shift m=Δpλm = \frac{\Delta p}{\lambda} is dimensionless. Spatial shift requires Δy=m⋅w\Delta y = m \cdot w, where w=λLdw = \frac{\lambda L}{d} is the fringe width.

  • Check units at every step: an optical path difference yields a dimensionless fringe count mm, which must be multiplied by fringe width in meters to yield a physical distance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the fringe width on the screen: w=λLd=(589×10−9 m)(1.80 m)1.50×10−4 m=7.068×10−3 m=0.7068 cmw = \frac{\lambda L}{d} = \frac{(589 \times 10^{-9}\text{ m})(1.80\text{ m})}{1.50 \times 10^{-4}\text{ m}} = 7.068 \times 10^{-3}\text{ m} = 0.7068\text{ cm}.

  2. Multiply the number of fringe shifts by the fringe width: Δy=m⋅w=(3.606)(0.7068 cm)≈2.55 cm\Delta y = m \cdot w = (3.606)(0.7068\text{ cm}) \approx 2.55\text{ cm}.

Final answer

2.55 cm2.55\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out and verify physical units so dimensionless counts are not mistaken for lengths.

  • Remember the direct relationship Δy=L(n−1)td\Delta y = \frac{L(n - 1)t}{d}, which bypasses λ\lambda entirely for the physical central-fringe shift.

Lock it in

Similar question

01

In a Young's double-slit setup in air, a thin glass slide (n=1.50n = 1.50, t=4.0 μmt = 4.0\,\mu\text{m}) is placed over one slit. If d=0.20 mmd = 0.20\text{ mm} and the screen is at L=1.2 mL = 1.2\text{ m}, find the lateral shift Δy\Delta y (in cm) of the central fringe.

Answer

Δy=1.2 cm\Delta y = 1.2\text{ cm}. Key steps: ΔOPD=(n−1)t=(1.50−1)(4.0×10−6 m)=2.0×10−6 m\Delta\text{OPD} = (n - 1)t = (1.50 - 1)(4.0 \times 10^{-6}\text{ m}) = 2.0 \times 10^{-6}\text{ m}. Equating to geometric path difference: Δy=L⋅ΔOPDd=(1.2)(2.0×10−6)0.20×10−3=0.012 m=1.2 cm\Delta y = \frac{L \cdot \Delta\text{OPD}}{d} = \frac{(1.2)(2.0 \times 10^{-6})}{0.20 \times 10^{-3}} = 0.012\text{ m} = 1.2\text{ cm}.

02

A double-slit experiment has slit spacing d=0.12 mmd = 0.12\text{ mm} and screen distance L=1.5 mL = 1.5\text{ m}. When a thin film of index n=1.45n = 1.45 is placed over one slit, the central fringe shifts by 1.8 cm1.8\text{ cm}. Calculate the thickness tt of the film in micrometers.

Answer

t=3.2 μmt = 3.2\,\mu\text{m}. Key steps: ΔOPD=d⋅ΔyL=(1.2×10−4 m)(0.018 m)1.5 m=1.44×10−6 m\Delta\text{OPD} = \frac{d \cdot \Delta y}{L} = \frac{(1.2 \times 10^{-4}\text{ m})(0.018\text{ m})}{1.5\text{ m}} = 1.44 \times 10^{-6}\text{ m}. Since ΔOPD=(n−1)t\Delta\text{OPD} = (n - 1)t, we have t=1.44×10−61.45−1=3.2×10−6 m=3.2 μmt = \frac{1.44 \times 10^{-6}}{1.45 - 1} = 3.2 \times 10^{-6}\text{ m} = 3.2\,\mu\text{m}.

03

A double-slit apparatus is submerged in water (nwater=1.33n_{\text{water}} = 1.33). A thin glass sheet (n=1.53n = 1.53) of thickness t=6.0 μmt = 6.0\,\mu\text{m} is placed over one slit. If d=0.25 mmd = 0.25\text{ mm} and L=2.0 mL = 2.0\text{ m}, find the lateral shift Δy\Delta y (in mm) of the central fringe.

Answer

Δy=9.6 mm\Delta y = 9.6\text{ mm}. Key steps: The net extra optical path length relative to the surrounding medium is ΔOPD=(nglass−nwater)t=(1.53−1.33)(6.0×10−6 m)=1.20×10−6 m\Delta\text{OPD} = (n_{\text{glass}} - n_{\text{water}})t = (1.53 - 1.33)(6.0 \times 10^{-6}\text{ m}) = 1.20 \times 10^{-6}\text{ m}. In the medium, the geometric condition is nwaterd⋅ΔyL=ΔOPDn_{\text{water}} \frac{d \cdot \Delta y}{L} = \Delta\text{OPD}, or equivalently the path difference matches d⋅ΔyL=(nglass−nwater)tnwater\frac{d \cdot \Delta y}{L} = \frac{(n_{\text{glass}} - n_{\text{water}})t}{n_{\text{water}}}... more directly, the optical path difference between the two rays reaching position yy is nwaterdyL−(nglass−nwater)t=0  ⟹  Δy=L(nglass−nwater)tnwaterd=(2.0)(0.20)(6.0×10−6)(1.33)(0.25×10−3)≈7.2 mmn_{\text{water}}\frac{d y}{L} - (n_{\text{glass}} - n_{\text{water}})t = 0 \implies \Delta y = \frac{L(n_{\text{glass}} - n_{\text{water}})t}{n_{\text{water}} d} = \frac{(2.0)(0.20)(6.0 \times 10^{-6})}{(1.33)(0.25 \times 10^{-3})} \approx 7.2\text{ mm} (or if defined in vacuum wavelengths: Δy=LΔOPDnmedd=7.2 mm\Delta y = \frac{L \Delta\text{OPD}}{n_{\text{med}} d} = 7.2\text{ mm}).

Loading workspace…