Resources

A student measures the magnetic force per unit length on a current-carrying wire inside a solenoid. The magnetic field is B=(125.0±1.5) mTB = (125.0 \pm 1.5)\text{ mT}, the current is I=(3.20±0.04) AI = (3.20 \pm 0.04)\text{ A}, and the active segment length is L=(45.0±0.5) mmL = (45.0 \pm 0.5)\text{ mm}. The wire is oriented perpendicular to the magnetic field such that the total Lorentz force is F=ILBF = I L B. Convert all quantities to standard SI units (extT ext{T}, extA ext{A}, extm ext{m}), calculate the magnetic force FF in newtons, and determine its absolute uncertainty δF\delta F in newtons using quadrature propagation.

Answer and steps

Final answer

F±δF=(0.01800±0.00035) N=(1.800±0.035)×10−2 NF \pm \delta F = (0.01800 \pm 0.00035)\text{ N} = (1.800 \pm 0.035) \times 10^{-2}\text{ N}

Steps

01

Convert All Quantities to Standard SI Units

Before calculating the force and its uncertainty, convert each given quantity into standard SI units (T\text{T}, A\text{A}, and m\text{m}):

  • Magnetic field (BB): B=125.0 mT=125.0×10−3 T=0.1250 TB = 125.0\text{ mT} = 125.0 \times 10^{-3}\text{ T} = 0.1250\text{ T} δB=1.5 mT=1.5×10−3 T=0.0015 T\delta B = 1.5\text{ mT} = 1.5 \times 10^{-3}\text{ T} = 0.0015\text{ T}
  • Current (II): I=3.20 A,δI=0.04 AI = 3.20\text{ A}, \quad \delta I = 0.04\text{ A}
  • Length of wire segment (LL): L=45.0 mm=45.0×10−3 m=0.0450 mL = 45.0\text{ mm} = 45.0 \times 10^{-3}\text{ m} = 0.0450\text{ m} δL=0.5 mm=0.5×10−3 m=0.0005 m\delta L = 0.5\text{ mm} = 0.5 \times 10^{-3}\text{ m} = 0.0005\text{ m}

02

Calculate the Central Value of the Magnetic Force

The wire segment is perpendicular to the magnetic field, so the magnetic force is given by:

F=ILBF = I L B

Substitute the central values:

F=(3.20 A)⋅(0.0450 m)⋅(0.1250 T)=0.01800 N=1.800×10−2 NF = (3.20\text{ A}) \cdot (0.0450\text{ m}) \cdot (0.1250\text{ T}) = 0.01800\text{ N} = 1.800 \times 10^{-2}\text{ N}


03

Compute the Fractional (Relative) Uncertainties

For an expression involving a product of independent quantities, the uncertainties combine in quadrature via fractional (relative) uncertainties:

  • Fractional uncertainty in current: δII=0.04 A3.20 A=0.0125\frac{\delta I}{I} = \frac{0.04\text{ A}}{3.20\text{ A}} = 0.0125
  • Fractional uncertainty in length: δLL=0.0005 m0.0450 m≈0.0111\frac{\delta L}{L} = \frac{0.0005\text{ m}}{0.0450\text{ m}} \approx 0.0111
  • Fractional uncertainty in magnetic field: δBB=0.0015 T0.1250 T=0.0120\frac{\delta B}{B} = \frac{0.0015\text{ T}}{0.1250\text{ T}} = 0.0120

04

Determine the Absolute Uncertainty via Quadrature Propagation

Using the rule of quadrature propagation for independent variables in a product:

δFF=(δII)2+(δLL)2+(δBB)2\frac{\delta F}{F} = \sqrt{\left(\frac{\delta I}{I}\right)^2 + \left(\frac{\delta L}{L}\right)^2 + \left(\frac{\delta B}{B}\right)^2}

Substitute the fractional uncertainties:

δFF=(0.0125)2+(0.0111)2+(0.0120)2≈0.0001563+0.0001235+0.0001440≈0.0004238≈0.0195\frac{\delta F}{F} = \sqrt{(0.0125)^2 + (0.0111)^2 + (0.0120)^2} \approx \sqrt{0.0001563 + 0.0001235 + 0.0001440} \approx \sqrt{0.0004238} \approx 0.0195

Multiply the relative uncertainty by the central value of FF to find the absolute uncertainty δF\delta F:

δF=F⋅(δFF)=0.01800 N⋅0.0195≈0.00035 N=0.035×10−2 N\delta F = F \cdot \left(\frac{\delta F}{F}\right) = 0.01800\text{ N} \cdot 0.0195 \approx 0.00035\text{ N} = 0.035 \times 10^{-2}\text{ N}


05

State the Final Result with Matching Precision

Expressing the result in standard uncertainty notation:

F±δF=(0.01800±0.00035) N=(1.800±0.035)×10−2 NF \pm \delta F = (0.01800 \pm 0.00035)\text{ N} = (1.800 \pm 0.035) \times 10^{-2}\text{ N}

Common Pitfall: Never sum absolute uncertainties directly when quantities are multiplied (δF≠δI+δL+δB\delta F \neq \delta I + \delta L + \delta B). Products and quotients require combining relative (fractional) uncertainties in quadrature. Additionally, ensure the final calculated value and its uncertainty are reported to the same decimal place.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student directly adds the absolute uncertainties instead of propagating relative uncertainties in quadrature for a product.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    B=0.1250 T,  δB=0.0015 T  ⟹  I=3.20 A,  δI=0.04 A  ⟹  L=0.0450 m,  δL=0.0005 mB = 0.1250\text{ T},\; \delta B = 0.0015\text{ T} \implies I = 3.20\text{ A},\; \delta I = 0.04\text{ A} \implies L = 0.0450\text{ m},\; \delta L = 0.0005\text{ m}

  2. Step 2

    F=I⋅L⋅B  ⟹  F=3.20⋅0.0450⋅0.1250=0.0180 NF = I \cdot L \cdot B \implies F = 3.20 \cdot 0.0450 \cdot 0.1250 = 0.0180\text{ N}

  3. Step 3

    δF=δI+δL+δB  ⟹  δF=0.04+0.0005+0.0015=0.0420 N\delta F = \delta I + \delta L + \delta B \implies \delta F = 0.04 + 0.0005 + 0.0015 = 0.0420\text{ N}

    Correct

    δFF=(δII)2+(δLL)2+(δBB)2  ⟹  δF=F(0.043.20)2+(0.00050.0450)2+(0.00150.1250)2≈0.00035 N\frac{\delta F}{F} = \sqrt{\left(\frac{\delta I}{I}\right)^2 + \left(\frac{\delta L}{L}\right)^2 + \left(\frac{\delta B}{B}\right)^2} \implies \delta F = F \sqrt{\left(\frac{0.04}{3.20}\right)^2 + \left(\frac{0.0005}{0.0450}\right)^2 + \left(\frac{0.0015}{0.1250}\right)^2} \approx 0.00035\text{ N}

    For a product F=ILBF = I L B, absolute uncertainties cannot be added directly—doing so also incorrectly adds quantities with different units (A\text{A}, m\text{m}, and T\text{T}). Independent variables in a product combine via fractional uncertainties in quadrature.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all values and uncertainties to base SI units accurately.

You correctly used the formula F=ILBF = I L B to compute the central value of the force.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Adding absolute uncertainties instead of relative quadrature for products

You treated uncertainty propagation for a product as a simple sum of absolute uncertainties.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the propagation rule for sums/differences with the propagation rule for products/quotients. When quantities are multiplied, relative (fractional) uncertainties must be combined in quadrature, not absolute uncertainties.

REASONING PATH
Your ACEpath teacher’s suggested approach
Operation type determines uncertainty type
  • For sums/differences (Z=A±BZ = A \pm B), add absolute uncertainties in quadrature: δZ=(δA)2+(δB)2\delta Z = \sqrt{(\delta A)^2 + (\delta B)^2}. For products/quotients (Z=A⋅BZ = A \cdot B or A/BA / B), add relative uncertainties in quadrature: δZZ=(δAA)2+(δBB)2\frac{\delta Z}{Z} = \sqrt{\left(\frac{\delta A}{A}\right)^2 + \left(\frac{\delta B}{B}\right)^2}.

  • Check the mathematical operation linking your variables before writing down your uncertainty equation.

Unit consistency check
  • Every term added together in an equation must have identical physical units.

  • Notice that δI  (A)\delta I\;(\text{A}), δL  (m)\delta L\;(\text{m}), and δB  (T)\delta B\;(\text{T}) have different units and cannot be directly summed to yield newtons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute each fractional uncertainty: δII=0.043.20=0.0125\frac{\delta I}{I} = \frac{0.04}{3.20} = 0.0125, δLL=0.00050.0450≈0.01111\frac{\delta L}{L} = \frac{0.0005}{0.0450} \approx 0.01111, and δBB=0.00150.1250=0.0120\frac{\delta B}{B} = \frac{0.0015}{0.1250} = 0.0120.

  2. Combine the fractional uncertainties in quadrature: δFF=(0.0125)2+(0.01111)2+(0.0120)2=0.00015625+0.00012346+0.00014400≈0.01959\frac{\delta F}{F} = \sqrt{(0.0125)^2 + (0.01111)^2 + (0.0120)^2} = \sqrt{0.00015625 + 0.00012346 + 0.00014400} \approx 0.01959.

  3. Multiply by the central force value to get absolute uncertainty: δF=F⋅(δFF)=(0.01800 N)(0.01959)≈0.00035 N\delta F = F \cdot \left(\frac{\delta F}{F}\right) = (0.01800\text{ N})(0.01959) \approx 0.00035\text{ N}.

Final answer

F±δF=(0.01800±0.00035) N=(1.800±0.035)×10−2 NF \pm \delta F = (0.01800 \pm 0.00035)\text{ N} = (1.800 \pm 0.035) \times 10^{-2}\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying whether a formula involves addition/subtraction or multiplication/division before propagating uncertainties.

  • Always perform a dimensional analysis check to ensure you never add quantities with different physical units.

OverviewACEpath Teacher's Diagnosis

02 The student computes the relative uncertainty via quadrature but forgets to multiply by F, reporting the relative uncertainty as the absolute uncertainty.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    B=0.1250 TB = 0.1250\text{ T}, I=3.20 AI = 3.20\text{ A}, L=0.0450 mL = 0.0450\text{ m}

  2. Step 2

    F=(3.20)(0.0450)(0.1250)  ⟹  F=0.0180 NF = (3.20)(0.0450)(0.1250) \implies F = 0.0180\text{ N}

  3. Step 3

    δBB=1.5125.0=0.0120\frac{\delta B}{B} = \frac{1.5}{125.0} = 0.0120, δII=0.043.20=0.0125\frac{\delta I}{I} = \frac{0.04}{3.20} = 0.0125, δLL=0.545.0=0.0111\frac{\delta L}{L} = \frac{0.5}{45.0} = 0.0111

  4. Step 4

    δF=(0.0120)2+(0.0125)2+(0.0111)2  ⟹  δF=0.0004237≈0.0206 N\delta F = \sqrt{(0.0120)^2 + (0.0125)^2 + (0.0111)^2} \implies \delta F = \sqrt{0.0004237} \approx 0.0206\text{ N}

    Correct

    δFF=(0.0120)2+(0.0125)2+(0.0111)2≈0.0195  ⟹  δF=F(δFF)=0.01800 N×0.0195≈0.00035 N\frac{\delta F}{F} = \sqrt{(0.0120)^2 + (0.0125)^2 + (0.0111)^2} \approx 0.0195 \implies \delta F = F \left(\frac{\delta F}{F}\right) = 0.01800\text{ N} \times 0.0195 \approx 0.00035\text{ N}

    You combined the fractional uncertainties in quadrature, but you set the expression equal to the absolute uncertainty δF\delta F rather than the relative uncertainty δFF\frac{\delta F}{F}. To find δF\delta F, you must multiply the quadrature result by FF.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted milli-units to base SI units accurately before computing.

You correctly calculated the central value of the Lorentz force.

You found the individual fractional uncertainties correctly and added them in quadrature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating relative uncertainty to absolute uncertainty

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the quadrature combination of fractional uncertainties as if it directly yielded absolute uncertainty, omitting the required final conversion step δF=F×(δFF)\delta F = F \times \left(\frac{\delta F}{F}\right).

REASONING PATH
Your ACEpath teacher’s suggested approach
Uncertainty in Products and Quotients
  • For a formula where variables multiply or divide (Q=x⋅y⋅zQ = x \cdot y \cdot z), combining uncertainties in quadrature yields the relative uncertainty δQQ=(δx/x)2+(δy/y)2+(δz/z)2\frac{\delta Q}{Q} = \sqrt{(\delta x/x)^2 + (\delta y/y)^2 + (\delta z/z)^2}.

  • Always write δQQ\frac{\delta Q}{Q} on the left-hand side of the quadrature formula, never just δQ\delta Q.

Converting Relative to Absolute Uncertainty
  • Absolute uncertainty retains the original physical units: δQ=Q⋅(δQQ)\delta Q = Q \cdot \left(\frac{\delta Q}{Q}\right).

  • Multiply the dimensionless fractional uncertainty by the central value of QQ and check that the resulting absolute uncertainty is physically smaller than or comparable to the central value.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the relative uncertainty in quadrature: δFF=(0.0120)2+(0.0125)2+(0.0111)2=0.0004238≈0.0195\frac{\delta F}{F} = \sqrt{(0.0120)^2 + (0.0125)^2 + (0.0111)^2} = \sqrt{0.0004238} \approx 0.0195.

  2. Multiply the relative uncertainty by the central force value: δF=F⋅0.0195=(0.01800 N)(0.0195)≈0.00035 N\delta F = F \cdot 0.0195 = (0.01800\text{ N})(0.0195) \approx 0.00035\text{ N}.

Final answer

F±δF=(0.01800±0.00035) N=(1.800±0.035)×10−2 NF \pm \delta F = (0.01800 \pm 0.00035)\text{ N} = (1.800 \pm 0.035) \times 10^{-2}\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full fraction δFF\frac{\delta F}{F} explicitly on the left-hand side whenever applying quadrature to products or quotients.

  • Perform a sanity check on unit consistency: relative uncertainty is dimensionless, while absolute uncertainty must match the units of the measured quantity.

  • Practice multiplying the dimensionless relative uncertainty by the central quantity to extract the final absolute uncertainty.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the magnetic force and absolute uncertainty without converting milliteslas and millimeters to standard SI units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    B=125.0 TB = 125.0\text{ T}, I=3.20 AI = 3.20\text{ A}, L=45.0 mL = 45.0\text{ m}

    Correct

    B=125.0 mT=0.1250 TB = 125.0\text{ mT} = 0.1250\text{ T}, I=3.20 AI = 3.20\text{ A}, L=45.0 mm=0.0450 mL = 45.0\text{ mm} = 0.0450\text{ m}

    You copied the numerical values directly without converting from milliteslas (mT\text{mT}) and millimeters (mm\text{mm}) to standard SI base units (T\text{T} and m\text{m}). Remember that the prefix milli- represents a factor of 10−310^{-3}.

  2. Step 2

    F=I⋅L⋅B  ⟹  F=(3.20)(45.0)(125.0)=18000 NF = I \cdot L \cdot B \implies F = (3.20)(45.0)(125.0) = 18000\text{ N}

    Correct

    F=(3.20 A)(0.0450 m)(0.1250 T)=0.01800 NF = (3.20\text{ A})(0.0450\text{ m})(0.1250\text{ T}) = 0.01800\text{ N}

    Your formula and multiplication were carried out correctly, but the result is scaled up by 10610^6 because BB and LL were not converted to standard SI units.

  3. Step 3

    δFF=(1.5125.0)2+(0.043.20)2+(0.545.0)2=0.01202+0.01252+0.01112≈0.0206\frac{\delta F}{F} = \sqrt{\left(\frac{1.5}{125.0}\right)^2 + \left(\frac{0.04}{3.20}\right)^2 + \left(\frac{0.5}{45.0}\right)^2} = \sqrt{0.0120^2 + 0.0125^2 + 0.0111^2} \approx 0.0206

  4. Step 4

    δF=18000⋅0.0206=370.8 N\delta F = 18000 \cdot 0.0206 = 370.8\text{ N}

    Correct

    δF=F⋅(δFF)=(0.01800 N)(0.0195)≈0.00035 N\delta F = F \cdot \left(\frac{\delta F}{F}\right) = (0.01800\text{ N})(0.0195) \approx 0.00035\text{ N}

    You correctly multiplied your calculated force by the relative uncertainty, but the absolute uncertainty inherited the 10610^6 scaling error from the central force value.

WHAT YOU DID WELL
Compliments from Your Teacher

You selected the correct physical formula F=ILBF = I L B for the magnetic force.

You correctly combined the relative uncertainties in quadrature for a product of independent variables.

You correctly multiplied the relative uncertainty by the central value to solve for the absolute uncertainty.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Metric prefix conversion omitted

You wrote the numerical values of BB and LL alongside base SI unit symbols without applying the 10−310^{-3} prefix multiplier.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking unit prefixes before substituting numbers into standard derived SI equations (such as 1 N=1 A⋅m⋅T1\text{ N} = 1\text{ A}\cdot\text{m}\cdot\text{T}), assuming raw given values are already in base units.

REASONING PATH
Your ACEpath teacher’s suggested approach
SI Base Unit Check
  • Derived SI units such as newtons (N=A⋅m⋅T\text{N} = \text{A}\cdot\text{m}\cdot\text{T}) require all inputs to be in base SI units without metric prefixes.

  • Always convert non-standard prefixes (1 mX=10−3 X1\text{ mX} = 10^{-3}\text{ X}, 1 \muX=10−6 X1\text{ \mu X} = 10^{-6}\text{ X}, 1 kX=103 X1\text{ kX} = 10^3\text{ X}) into scientific notation before substituting into formulas.

Relative vs. Absolute Uncertainty Scale
  • Relative uncertainties δXX\frac{\delta X}{X} are dimensionless and unaffected by unit prefixes, but absolute uncertainties δX\delta X share the physical unit and scale of XX.

  • Ensure the absolute uncertainty δX=X⋅(δXX)\delta X = X \cdot \left(\frac{\delta X}{X}\right) is computed using the correctly scaled central value XX in standard SI units.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert all given quantities to base SI units: B=125.0×10−3 T=0.1250 TB = 125.0 \times 10^{-3}\text{ T} = 0.1250\text{ T}, δB=0.0015 T\delta B = 0.0015\text{ T}, L=45.0×10−3 m=0.0450 mL = 45.0 \times 10^{-3}\text{ m} = 0.0450\text{ m}, δL=0.0005 m\delta L = 0.0005\text{ m}, I=3.20 AI = 3.20\text{ A}, and δI=0.04 A\delta I = 0.04\text{ A}.

  2. Calculate the central force: F=ILB=(3.20 A)(0.0450 m)(0.1250 T)=0.01800 NF = I L B = (3.20\text{ A})(0.0450\text{ m})(0.1250\text{ T}) = 0.01800\text{ N}.

  3. Compute the relative uncertainty via quadrature: δFF=(0.043.20)2+(0.00050.0450)2+(0.00150.1250)2≈0.0195\frac{\delta F}{F} = \sqrt{\left(\frac{0.04}{3.20}\right)^2 + \left(\frac{0.0005}{0.0450}\right)^2 + \left(\frac{0.0015}{0.1250}\right)^2} \approx 0.0195.

  4. Calculate the absolute uncertainty: δF=(0.01800 N)(0.0195)≈0.00035 N\delta F = (0.01800\text{ N})(0.0195) \approx 0.00035\text{ N}.

Final answer

F±δF=(0.01800±0.00035) N=(1.800±0.035)×10−2 NF \pm \delta F = (0.01800 \pm 0.00035)\text{ N} = (1.800 \pm 0.035) \times 10^{-2}\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review common SI prefixes (milli-, micro-, kilo-, mega-) and practice converting them to powers of ten immediately upon reading a problem statement.

  • Perform an order-of-magnitude sanity check on calculated forces: a small tabletop solenoid current and segment should produce millinewton-scale forces, not thousands of newtons.

Lock it in

Similar question

01

A rectangular block has measured length x=(8.00±0.08) cmx = (8.00 \pm 0.08)\text{ cm} and width y=(5.00±0.10) cmy = (5.00 \pm 0.10)\text{ cm}. Calculate the area AA and its absolute uncertainty δA\delta A in cm2\text{cm}^2 using quadrature propagation.

Answer

A=xy=40.0 cm2A = x y = 40.0\text{ cm}^2. Fractional uncertainties: δxx=0.088.00=0.01\frac{\delta x}{x} = \frac{0.08}{8.00} = 0.01, δyy=0.105.00=0.02\frac{\delta y}{y} = \frac{0.10}{5.00} = 0.02. Combined relative uncertainty: δAA=0.012+0.022=0.0005≈0.02236\frac{\delta A}{A} = \sqrt{0.01^2 + 0.02^2} = \sqrt{0.0005} \approx 0.02236. Absolute uncertainty: δA=40.0×0.02236≈0.89 cm2\delta A = 40.0 \times 0.02236 \approx 0.89\text{ cm}^2. Final result: A±δA=(40.0±0.9) cm2A \pm \delta A = (40.0 \pm 0.9)\text{ cm}^2.

02

An electrical resistor carries current I=(2.00±0.04) AI = (2.00 \pm 0.04)\text{ A} with resistance R=(50.0±1.5)  ΩR = (50.0 \pm 1.5)\;\Omega. Using P=I2RP = I^2 R, calculate the power PP and its absolute uncertainty δP\delta P in watts.

Answer

P=I2R=(2.00)2(50.0)=200 WP = I^2 R = (2.00)^2(50.0) = 200\text{ W}. Due to the power of 2 on II, its relative uncertainty is scaled: δPP=(2δII)2+(δRR)2=(2⋅0.042.00)2+(1.550.0)2=(0.04)2+(0.03)2=0.05\frac{\delta P}{P} = \sqrt{\left(2\frac{\delta I}{I}\right)^2 + \left(\frac{\delta R}{R}\right)^2} = \sqrt{\left(2 \cdot \frac{0.04}{2.00}\right)^2 + \left(\frac{1.5}{50.0}\right)^2} = \sqrt{(0.04)^2 + (0.03)^2} = 0.05. Absolute uncertainty: δP=200×0.05=10 W\delta P = 200 \times 0.05 = 10\text{ W}. Final result: P±δP=(200±10) WP \pm \delta P = (200 \pm 10)\text{ W}.

03

The density of a cylinder is ρ=mπr2h\rho = \frac{m}{\pi r^2 h}. Given mass m=(150.0±0.3) gm = (150.0 \pm 0.3)\text{ g}, radius r=(1.20±0.02) cmr = (1.20 \pm 0.02)\text{ cm}, and height h=(6.50±0.05) cmh = (6.50 \pm 0.05)\text{ cm}, find the relative uncertainty δρρ\frac{\delta \rho}{\rho} and absolute uncertainty δρ\delta \rho in g/cm3\text{g/cm}^3.

Answer

Central volume: V=π(1.20)2(6.50)≈29.405 cm3V = \pi (1.20)^2 (6.50) \approx 29.405\text{ cm}^3, so ρ=150.029.405≈5.101 g/cm3\rho = \frac{150.0}{29.405} \approx 5.101\text{ g/cm}^3. Relative uncertainties: δmm=0.3150.0=0.0020\frac{\delta m}{m} = \frac{0.3}{150.0} = 0.0020, δrr=0.021.20≈0.0167\frac{\delta r}{r} = \frac{0.02}{1.20} \approx 0.0167, δhh=0.056.50≈0.00769\frac{\delta h}{h} = \frac{0.05}{6.50} \approx 0.00769. Quadrature combination: δρρ=(0.0020)2+(2×0.0167)2+(0.00769)2=0.000004+0.001116+0.000059≈0.0343\frac{\delta \rho}{\rho} = \sqrt{(0.0020)^2 + (2 \times 0.0167)^2 + (0.00769)^2} = \sqrt{0.000004 + 0.001116 + 0.000059} \approx 0.0343 (or 3.43%3.43\%). Absolute uncertainty: δρ=5.101×0.0343≈0.18 g/cm3\delta \rho = 5.101 \times 0.0343 \approx 0.18\text{ g/cm}^3. Final result: ρ±δρ=(5.10±0.18) g/cm3\rho \pm \delta \rho = (5.10 \pm 0.18)\text{ g/cm}^3.

Loading workspace…