Resources

A direct-current electric winch with an electrical resistance of R=4.80 ΩR = 4.80\ \Omega is connected to a V=120 VV = 120\ \text{V} power source and operates with an overall mechanical efficiency of η=75.0%\eta = 75.0\%. The winch is used to lift a crate of mass m=85.0 kgm = 85.0\ \text{kg} vertically upward at a constant speed vv in a gravitational field where g=9.80 m/s2g = 9.80\ \text{m/s}^2. (a) Calculate the electrical power PelecP_{\text{elec}} consumed by the winch. (b) Calculate the vertical lifting speed vv of the crate.

Answer and steps

Final answer

(a) Pelec=3.00×103 WP_{\text{elec}} = 3.00 \times 10^3\ \text{W}; (b) v=2.70 m/sv = 2.70\ \text{m/s}

Steps

Part (a): Calculating the Electrical Power Consumed by the Winch

The electrical power PelecP_{\text{elec}} drawn by a circuit component connected across a constant potential difference VV with an effective resistance RR is given by Joule's power law:

Pelec=V2RP_{\text{elec}} = \frac{V^2}{R}

Substitute the given values of the voltage source and electrical resistance:

Pelec=(120 V)24.80 Ω=14 400 V24.80 Ω=3000 W=3.00×103 WP_{\text{elec}} = \frac{(120\text{ V})^2}{4.80\ \Omega} = \frac{14\,400\text{ V}^2}{4.80\ \Omega} = 3000\text{ W} = 3.00 \times 10^3\text{ W}


Part (b): Calculating the Vertical Lifting Speed of the Crate

  1. Determine the useful mechanical output power: The winch converts electrical power into mechanical power with an efficiency of η=75.0%=0.750\eta = 75.0\% = 0.750. The mechanical power PmechP_{\text{mech}} available to lift the load is:

    Pmech=η⋅Pelec=0.750⋅3000 W=2250 WP_{\text{mech}} = \eta \cdot P_{\text{elec}} = 0.750 \cdot 3000\text{ W} = 2250\text{ W}

  2. Relate mechanical power to lifting force and velocity: Because the crate moves vertically upward at a constant speed vv, the upward tension force FF applied by the winch balances the downward gravitational force:

    F=mgF = m g

    The mechanical power delivered to the crate is the rate of work done by this force:

    Pmech=F⋅v=mgvP_{\text{mech}} = F \cdot v = m g v

  3. Solve for the lifting speed vv:

    v=Pmechmgv = \frac{P_{\text{mech}}}{m g}

    Substitute the values for mm, gg, and PmechP_{\text{mech}}:

    v=2250 W85.0 kg⋅9.80 m/s2=2250 W833 N≈2.70 m/sv = \frac{2250\text{ W}}{85.0\text{ kg} \cdot 9.80\text{ m/s}^2} = \frac{2250\text{ W}}{833\text{ N}} \approx 2.70\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the efficiency formula by dividing the electrical power by efficiency rather than multiplying, producing an unphysical increase in mechanical power.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Pelec=V2R  ⟹  Pelec=(120)24.80=3000 WP_{\text{elec}} = \frac{V^2}{R} \implies P_{\text{elec}} = \frac{(120)^2}{4.80} = 3000\text{ W}

  2. Step 2

    Pout=Pelecη  ⟹  Pout=30000.750=4000 WP_{\text{out}} = \frac{P_{\text{elec}}}{\eta} \implies P_{\text{out}} = \frac{3000}{0.750} = 4000\text{ W}

    Correct

    Pout=η⋅Pelec=0.750⋅3000 W=2250 WP_{\text{out}} = \eta \cdot P_{\text{elec}} = 0.750 \cdot 3000\text{ W} = 2250\text{ W}

    Efficiency is defined as η=PoutPin\eta = \frac{P_{\text{out}}}{P_{\text{in}}}, which means the mechanical output power must be Pout=η⋅PelecP_{\text{out}} = \eta \cdot P_{\text{elec}}. Dividing by η\eta yields an unphysical output power of 4000 W4000\text{ W}, which exceeds the input power.

  3. Step 3

    Pout=m⋅g⋅v  ⟹  v=400085.0⋅9.80=4.80 m/sP_{\text{out}} = m \cdot g \cdot v \implies v = \frac{4000}{85.0 \cdot 9.80} = 4.80\text{ m/s}

    Correct

    v=Poutmg=2250 W85.0 kg⋅9.80 m/s2≈2.70 m/sv = \frac{P_{\text{out}}}{m g} = \frac{2250\text{ W}}{85.0\text{ kg} \cdot 9.80\text{ m/s}^2} \approx 2.70\text{ m/s}

    Your formula relating mechanical power to lifting speed, P=mgvP = m g v, is completely correct, but your calculated speed was affected by using the incorrect 4000 W4000\text{ W} output power.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected and evaluated Joule's power law P=V2RP = \frac{V^2}{R} for part (a).

You correctly identified that the mechanical power required to lift the crate at constant speed is given by P=mgvP = m g v.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted efficiency formula

You divided the electrical power by efficiency rather than multiplying, obtaining an output power that is larger than the input power.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the input and output roles in the efficiency definition η=useful outputtotal input\eta = \frac{\text{useful output}}{\text{total input}}, forgetting that real machines always have an output power strictly less than the input power.

REASONING PATH
Your ACEpath teacher’s suggested approach
Physical Reality Check
  • For any passive or real machine, useful power output must be less than or equal to total power input: Pout≤PinP_{\text{out}} \le P_{\text{in}}.

  • Whenever you calculate PoutP_{\text{out}}, verify that Pout<PinP_{\text{out}} < P_{\text{in}} when η<100%\eta < 100\%.

Efficiency Definition
  • Efficiency is η=PoutPin\eta = \frac{P_{\text{out}}}{P_{\text{in}}}, so Pout=ηPinP_{\text{out}} = \eta P_{\text{in}} and Pin=PoutηP_{\text{in}} = \frac{P_{\text{out}}}{\eta}.

  • Identify whether the given power is what goes into the system (electrical) or what comes out as useful work (mechanical) before rearranging the formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply the electrical input power by the efficiency to find the actual mechanical output power: Pout=η⋅Pelec=0.750⋅3000 W=2250 WP_{\text{out}} = \eta \cdot P_{\text{elec}} = 0.750 \cdot 3000\text{ W} = 2250\text{ W}.

  2. Substitute Pout=2250 WP_{\text{out}} = 2250\text{ W} into the velocity equation: v=Poutmg=2250 W85.0 kg⋅9.80 m/s2=2250833≈2.70 m/sv = \frac{P_{\text{out}}}{m g} = \frac{2250\text{ W}}{85.0\text{ kg} \cdot 9.80\text{ m/s}^2} = \frac{2250}{833} \approx 2.70\text{ m/s}.

Final answer

(a) Pelec=3.00×103 WP_{\text{elec}} = 3.00 \times 10^3\text{ W}; (b) v=2.70 m/sv = 2.70\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the definition of efficiency as useful output divided by total input.

  • Always perform a quick sanity check: mechanical output power must be smaller than the electrical power supplied to the motor.

  • Practice rearranging η=PoutPin\eta = \frac{P_{\text{out}}}{P_{\text{in}}} when solving for PoutP_{\text{out}} versus when solving for PinP_{\text{in}}.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the lifting velocity using the total electrical input power instead of applying the mechanical efficiency to find the useful output power.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pelec=V2R  ⟹  Pelec=144004.80=3000 WP_{\text{elec}} = \frac{V^2}{R} \implies P_{\text{elec}} = \frac{14400}{4.80} = 3000\text{ W}

  2. Step 2

    P=m∗g∗v  ⟹  v=Pelecm∗gP = m * g * v \implies v = \frac{P_{\text{elec}}}{m * g}

    Correct

    Pmech=ηPelec=mgv  ⟹  v=ηPelecmgP_{\text{mech}} = \eta P_{\text{elec}} = m g v \implies v = \frac{\eta P_{\text{elec}}}{m g}

    You equated the mechanical power required to lift the crate directly to the total electrical power input, forgetting to multiply by the efficiency factor η=0.750\eta = 0.750.

  3. Step 3

    v=300085.0∗9.80=3.60 m/sv = \frac{3000}{85.0 * 9.80} = 3.60\text{ m/s}

    Correct

    v=0.750⋅3000 W85.0 kg⋅9.80 m/s2≈2.70 m/sv = \frac{0.750 \cdot 3000\text{ W}}{85.0\text{ kg} \cdot 9.80\text{ m/s}^2} \approx 2.70\text{ m/s}

    Your arithmetic was carried out accurately from your previous expression, but the final velocity is too large because it was calculated without the efficiency factor.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Joule's law P=V2RP = \frac{V^2}{R} to find the total electrical power drawn by the winch.

You correctly identified the mechanical relationship P=mgvP = m g v for lifting an object at constant speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of efficiency factor

You substituted total electrical input power PelecP_{\text{elec}} where useful mechanical output power PmechP_{\text{mech}} was required.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing input power (PinP_{\text{in}}) with useful output power (PoutP_{\text{out}}) in energy-conversion devices that operate with an efficiency less than 100%.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define efficiency
  • η=PoutPin  ⟹  Pout=η⋅Pin\eta = \frac{P_{\text{out}}}{P_{\text{in}}} \implies P_{\text{out}} = \eta \cdot P_{\text{in}}

  • Whenever a machine has an efficiency η<1\eta < 1, convert input power to output power before setting it equal to mechanical work or lifting rate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate useful mechanical output power: Pmech=ηPelec=0.750×3000 W=2250 WP_{\text{mech}} = \eta P_{\text{elec}} = 0.750 \times 3000\text{ W} = 2250\text{ W}.

  2. Equate useful mechanical power to lifting rate: Pmech=mgvP_{\text{mech}} = m g v.

  3. Solve for the vertical speed: v=Pmechmg=2250 W85.0 kg×9.80 m/s2≈2.70 m/sv = \frac{P_{\text{mech}}}{m g} = \frac{2250\text{ W}}{85.0\text{ kg} \times 9.80\text{ m/s}^2} \approx 2.70\text{ m/s}.

Final answer

(a) Pelec=3.00×103 WP_{\text{elec}} = 3.00 \times 10^3\text{ W}; (b) v=2.70 m/sv = 2.70\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between electrical input power PinP_{\text{in}} and useful mechanical power PoutP_{\text{out}}.

  • Practice setting up an energy balance equation with efficiency η\eta before substituting numbers into rate formulas.

OverviewACEpath Teacher's Diagnosis

03 The student misuses the mass directly as the lifting force instead of multiplying by gravitational acceleration to find the weight.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Pelec=V2R  ⟹  Pelec=(120)24.80=3000 WP_{\text{elec}} = \frac{V^2}{R} \implies P_{\text{elec}} = \frac{(120)^2}{4.80} = 3000\text{ W}

  2. Step 2

    Pout=0.750∗3000=2250 WP_{\text{out}} = 0.750 * 3000 = 2250\text{ W}

  3. Step 3

    Pout=F∗v=m∗vP_{\text{out}} = F * v = m * v

    Correct

    Pout=F⋅v=(mg)⋅vP_{\text{out}} = F \cdot v = (m g) \cdot v

    You substituted the crate's mass mm directly as the lifting force FF. For a vertical lift at constant speed, the tension force must balance the gravitational weight force Fg=mgF_g = m g, not just the mass mm.

  4. Step 4

    v=225085.0=26.5 m/sv = \frac{2250}{85.0} = 26.5\text{ m/s}

    Correct

    v=Pmechmg=2250 W85.0 kg⋅9.80 m/s2≈2.70 m/sv = \frac{P_{\text{mech}}}{m g} = \frac{2250\text{ W}}{85.0\text{ kg} \cdot 9.80\text{ m/s}^2} \approx 2.70\text{ m/s}

    Because mass was used instead of weight in the previous step, your calculated speed is off by a factor of gg (9.80 m/s29.80\text{ m/s}^2).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the formula P=V2RP = \frac{V^2}{R} to calculate the electrical input power.

You correctly applied the efficiency equation Pout=ηPinP_{\text{out}} = \eta P_{\text{in}} to obtain the available mechanical power.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass used instead of weight

You set the upward lifting force FF directly equal to mass mm rather than weight mgm g.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing mass (mm, in kilograms) with force (Fg=mgF_g = mg, in newtons) when substituting into the mechanical power expression P=FvP = F v.

REASONING PATH
Your ACEpath teacher’s suggested approach
Mass vs. Weight Force
  • Mass (mm) has units of kilograms (kg\text{kg}), whereas force (FF) has units of newtons (N\text{N}). For vertical motion, Flift=mgF_{\text{lift}} = m g.

  • Always convert mass to weight by multiplying by gravitational acceleration gg before substituting into force-based equations.

Unit Dimensional Check
  • Power has dimensions of N⋅m/s=W\text{N}\cdot\text{m/s} = \text{W}. Dividing power by mass yields Wkg=m2/s3\frac{\text{W}}{\text{kg}} = \text{m}^2/\text{s}^3, not velocity (m/s\text{m/s}).

  • Check units: PF=WN=m/s\frac{P}{F} = \frac{\text{W}}{\text{N}} = \text{m/s}, verifying that the denominator must be a force in newtons.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the upward lifting force required to support the crate at constant speed: F=mg=85.0 kg×9.80 m/s2=833 NF = m g = 85.0\text{ kg} \times 9.80\text{ m/s}^2 = 833\text{ N}.

  2. Relate the mechanical output power to force and speed: Pmech=Fv=(mg)vP_{\text{mech}} = F v = (m g) v.

  3. Solve for the vertical speed: v=Pmechmg=2250 W833 N≈2.70 m/sv = \frac{P_{\text{mech}}}{m g} = \frac{2250\text{ W}}{833\text{ N}} \approx 2.70\text{ m/s}.

Final answer

(a) Pelec=3.00×103 WP_{\text{elec}} = 3.00 \times 10^3\text{ W}; (b) v=2.70 m/sv = 2.70\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between mass (mm) and weight (Fg=mgF_g = mg) in dynamic and static force balances.

  • Practice using dimensional analysis to check whether Pquantity\frac{P}{\text{quantity}} produces the intended units of velocity (m/s\text{m/s}).

Lock it in

Similar question

01

An electric hoist connected to a 240 V240\text{ V} line draws a current of 5.0 A5.0\text{ A} and operates at an efficiency of 70.0%70.0\%. Calculate the mechanical power output available to lift a load.

Answer

Pout=840 WP_{\text{out}} = 840\text{ W}. First, find electrical input power: Pin=IV=(5.0 A)(240 V)=1200 WP_{\text{in}} = I V = (5.0\text{ A})(240\text{ V}) = 1200\text{ W}. Then find output power using efficiency: Pout=ηPin=0.700×1200 W=840 WP_{\text{out}} = \eta P_{\text{in}} = 0.700 \times 1200\text{ W} = 840\text{ W}.

02

A 200 V200\text{ V} DC motor has an internal resistance of 8.0 Ω8.0\ \Omega and an efficiency of 80.0%80.0\%. It is used to pull a 150 kg150\text{ kg} sled across a frictionless horizontal surface by a rope at constant acceleration from rest to 10.0 m/s10.0\text{ m/s} in 5.0 s5.0\text{ s}. Determine whether the motor has enough average mechanical power to accomplish this task.

Answer

Yes, the motor has sufficient power (4000 W>1500 W4000\text{ W} > 1500\text{ W}).

  1. Electrical input power: Pin=V2R=20028.0=5000 WP_{\text{in}} = \frac{V^2}{R} = \frac{200^2}{8.0} = 5000\text{ W}.
  2. Mechanical output power: Pout=0.800×5000 W=4000 WP_{\text{out}} = 0.800 \times 5000\text{ W} = 4000\text{ W}.
  3. Required average power: Preq=ΔKΔt=12(150)(10.0)25.0=1500 WP_{\text{req}} = \frac{\Delta K}{\Delta t} = \frac{\frac{1}{2}(150)(10.0)^2}{5.0} = 1500\text{ W}.
03

An electric crane lifts a 500 kg500\text{ kg} beam vertically at a constant speed of 1.50 m/s1.50\text{ m/s} (g=9.80 m/s2g = 9.80\text{ m/s}^2). The crane motor operates with an overall efficiency of 65.0%65.0\% from a 440 V440\text{ V} supply. Find the current II drawn from the electrical power supply.

Answer

I≈25.7 AI \approx 25.7\text{ A}.

  1. Required mechanical output power: Pout=mgv=(500 kg)(9.80 m/s2)(1.50 m/s)=7350 WP_{\text{out}} = m g v = (500\text{ kg})(9.80\text{ m/s}^2)(1.50\text{ m/s}) = 7350\text{ W}.
  2. Electrical input power required: Pin=Poutη=7350 W0.650≈11307.7 WP_{\text{in}} = \frac{P_{\text{out}}}{\eta} = \frac{7350\text{ W}}{0.650} \approx 11307.7\text{ W}.
  3. Current drawn: I=PinV=11307.7 W440 V≈25.7 AI = \frac{P_{\text{in}}}{V} = \frac{11307.7\text{ W}}{440\text{ V}} \approx 25.7\text{ A}.
Loading workspace…