Resources

A communications satellite of mass m=450 kgm = 450\text{ kg} orbits Earth in a circular trajectory at an altitude of h=6.40×105 mh = 6.40 \times 10^5\text{ m} above Earth's surface. Earth has a mass of M=5.972×1024 kgM = 5.972 \times 10^{24}\text{ kg} and a mean radius of R=6.371×106 mR = 6.371 \times 10^6\text{ m}. Using the universal gravitational constant G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2, calculate (a) the satellite's orbital speed vv, and (b) its orbital period TT in minutes.

Answer and steps

Final answer

(a) v=7.54×103 m/sv = 7.54 \times 10^3\text{ m/s}; (b) T=97.3 minT = 97.3\text{ min}

Steps

01

Determine the orbital radius

The orbital radius rr is measured from the center of Earth, not from its surface. Therefore, it is the sum of Earth's mean radius RR and the satellite's altitude hh:

r=R+hr = R + h

Substitute the given values:

r=6.371×106 m+6.40×105 m=7.011×106 mr = 6.371 \times 10^6\text{ m} + 6.40 \times 10^5\text{ m} = 7.011 \times 10^6\text{ m}

(Common Pitfall: Do not use only the altitude hh in gravitation and circular motion formulas; gravitational force acts toward the center of mass of the planet.)


02

Calculate the orbital speed vv

For a circular orbit, the gravitational force provides the necessary centripetal force:

Fg=FcF_g = F_c

GMmr2=mv2r\frac{G M m}{r^2} = \frac{m v^2}{r}

Notice that the satellite's mass mm cancels out. Solving for the orbital speed vv:

v=GMrv = \sqrt{\frac{G M}{r}}

Substitute the known constants and values:

v=(6.674×10−11 N⋅m2/kg2)(5.972×1024 kg)7.011×106 mv = \sqrt{\frac{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(5.972 \times 10^{24}\text{ kg})}{7.011 \times 10^6\text{ m}}}

v=3.9857×10147.011×106≈5.685×107≈7.54×103 m/sv = \sqrt{\frac{3.9857 \times 10^{14}}{7.011 \times 10^6}} \approx \sqrt{5.685 \times 10^7} \approx 7.54 \times 10^3\text{ m/s}


03

Calculate the orbital period TT

The orbital period is the time required to complete one full revolution of circumference 2πr2\pi r at speed vv:

T=2πrvT = \frac{2\pi r}{v}

Substitute the values:

T=2π(7.011×106 m)7.54×103 m/s≈5.84×103 sT = \frac{2\pi (7.011 \times 10^6\text{ m})}{7.54 \times 10^3\text{ m/s}} \approx 5.84 \times 10^3\text{ s}

Convert the period into minutes by dividing by 60 s/min60\text{ s/min}:

T=5.84×103 s60 s/min≈97.3 minT = \frac{5.84 \times 10^3\text{ s}}{60\text{ s/min}} \approx 97.3\text{ min}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the altitude h instead of the total orbital radius r = R + h from Earth's center when calculating orbital speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=6.40×105 mr = 6.40 \times 10^5\text{ m}

    Correct

    r=R+h=6.371×106 m+6.40×105 m=7.011×106 mr = R + h = 6.371 \times 10^6\text{ m} + 6.40 \times 10^5\text{ m} = 7.011 \times 10^6\text{ m}

    You assigned the altitude hh directly to the orbital radius rr. Gravitational and circular motion formulas require the distance from the center of Earth's mass, which is the sum of Earth's mean radius and the altitude (r=R+hr = R + h).

  2. Step 2

    v=GMr  ⟹  v=(6.674×10−11×5.972×1024)(6.40×105)  ⟹  v=24950 m/sv = \sqrt{\frac{GM}{r}} \implies v = \sqrt{\frac{(6.674 \times 10^{-11} \times 5.972 \times 10^{24})}{(6.40 \times 10^5)}} \implies v = 24950\text{ m/s}

    Correct

    v=GMr=(6.674×10−11 N⋅m2/kg2)(5.972×1024 kg)7.011×106 m≈7.54×103 m/sv = \sqrt{\frac{GM}{r}} = \sqrt{\frac{(6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2)(5.972 \times 10^{24}\text{ kg})}{7.011 \times 10^6\text{ m}}} \approx 7.54 \times 10^3\text{ m/s}

    Your formula v=GMrv = \sqrt{\frac{GM}{r}} and arithmetic were executed properly, but the numerical answer was thrown off by substituting the altitude instead of the total orbital radius.

  3. Step 3

    T=2πrv  ⟹  T=(2π×6.40×105)24950  ⟹  T=161.2 s  ⟹  T=161.260=2.69 minT = \frac{2\pi r}{v} \implies T = \frac{(2\pi \times 6.40 \times 10^5)}{24950} \implies T = 161.2\text{ s} \implies T = \frac{161.2}{60} = 2.69\text{ min}

    Correct

    T=2πrv=2π(7.011×106 m)7.54×103 m/s≈5.84×103 s≈97.3 minT = \frac{2\pi r}{v} = \frac{2\pi (7.011 \times 10^6\text{ m})}{7.54 \times 10^3\text{ m/s}} \approx 5.84 \times 10^3\text{ s} \approx 97.3\text{ min}

    You selected the correct orbital period formula T=2πrvT = \frac{2\pi r}{v} and converted seconds to minutes accurately, but the result inherited the incorrect values of rr and vv from earlier steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the circular orbital velocity formula v=GMrv = \sqrt{\frac{GM}{r}}.

You used the correct relation between period, orbital circumference, and speed: T=2πrvT = \frac{2\pi r}{v}.

You accurately converted seconds into minutes by dividing by 6060.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Altitude vs. Orbital Radius Confusion

You set the orbital radius rr equal to the altitude h=6.40×105 mh = 6.40 \times 10^5\text{ m} instead of adding Earth's radius RR.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the given height above the ground as the full separation distance in Newton's law of universal gravitation, overlooking that spherical celestial bodies exert gravity toward their center of mass.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define distance from center of mass
  • Newton's law of gravitation uses the center-to-center distance r=Rplanet+hr = R_{\text{planet}} + h, never just surface altitude hh.

  • Always sketch the planet and orbit first, drawing the radius arrow starting strictly from the center of the planet.

Check magnitude against surface speed
  • Low Earth orbit speeds are approximately 7.5 km/s7.5\text{ km/s} to 8.0 km/s8.0\text{ km/s} with periods around 90 min90\text{ min}.

  • If your calculated speed is around 25 km/s25\text{ km/s} or your period is only a couple of minutes, check whether your orbital radius is missing the planet's radius.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. r=R+h=6.371×106 m+6.40×105 m=7.011×106 mr = R + h = 6.371 \times 10^6\text{ m} + 6.40 \times 10^5\text{ m} = 7.011 \times 10^6\text{ m}

  2. v=GMr=(6.674×10−11)(5.972×1024)7.011×106≈7.54×103 m/sv = \sqrt{\frac{GM}{r}} = \sqrt{\frac{(6.674 \times 10^{-11})(5.972 \times 10^{24})}{7.011 \times 10^6}} \approx 7.54 \times 10^3\text{ m/s}

  3. T=2πrv=2π(7.011×106)7.54×103≈5843 s=584360 min≈97.3 minT = \frac{2\pi r}{v} = \frac{2\pi (7.011 \times 10^6)}{7.54 \times 10^3} \approx 5843\text{ s} = \frac{5843}{60}\text{ min} \approx 97.3\text{ min}

Final answer

(a) v=7.54×103 m/sv = 7.54 \times 10^3\text{ m/s}; (b) T=97.3 minT = 97.3\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review problems where altitude is given, and practice immediately writing r=R+hr = R + h as your first line of work.

  • Solve follow-up questions for satellites around other bodies (like the Moon or Mars) to reinforce tracking both planetary radius and altitude.

OverviewACEpath Teacher's Diagnosis

02 The student uses the surface radius R of the Earth instead of adding the altitude h to find the orbital radius.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    r=6.371×106 mr = 6.371 \times 10^6\text{ m}

    Correct

    r=R+h=6.371×106 m+6.40×105 m=7.011×106 mr = R + h = 6.371 \times 10^6\text{ m} + 6.40 \times 10^5\text{ m} = 7.011 \times 10^6\text{ m}

    You set the orbital radius equal to Earth's radius RR, omitting the altitude hh. Orbital radius is the distance from the center of Earth to the satellite, so you must add the altitude above the surface: r=R+hr = R + h.

  2. Step 2

    v=GMr=6.674×10−11×5.972×10246.371×106  ⟹  v=7909 m/sv = \sqrt{\frac{GM}{r}} = \sqrt{\frac{6.674 \times 10^{-11} \times 5.972 \times 10^{24}}{6.371 \times 10^6}} \implies v = 7909\text{ m/s}

    Correct

    v=GMr=6.674×10−11×5.972×10247.011×106≈7.54×103 m/sv = \sqrt{\frac{GM}{r}} = \sqrt{\frac{6.674 \times 10^{-11} \times 5.972 \times 10^{24}}{7.011 \times 10^6}} \approx 7.54 \times 10^3\text{ m/s}

    You chose the correct formula for orbital velocity and executed the calculation accurately, but your result was altered by using the incorrect radius from Step 1.

  3. Step 3

    T=2πrv=2π×6.371×1067909  ⟹  T=5061 s  ⟹  T=506160=84.4 minT = \frac{2\pi r}{v} = \frac{2\pi \times 6.371 \times 10^6}{7909} \implies T = 5061\text{ s} \implies T = \frac{5061}{60} = 84.4\text{ min}

    Correct

    T=2πrv=2π(7.011×106 m)7.54×103 m/s≈5844 s=97.3 minT = \frac{2\pi r}{v} = \frac{2\pi (7.011 \times 10^6\text{ m})}{7.54 \times 10^3\text{ m/s}} \approx 5844\text{ s} = 97.3\text{ min}

    You correctly set up the orbital period formula and converted seconds to minutes, but the final numerical value was affected by the earlier radius error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated gravitational force to centripetal force to obtain v=GM/rv = \sqrt{GM/r}.

You used the correct relation T=2πr/vT = 2\pi r / v for the orbital period.

You correctly divided by 6060 to convert seconds into minutes.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Radius vs. Altitude Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the satellite's orbital radius rr with Earth's surface radius RR, forgetting that orbital motion occurs around the central body's center of mass, requiring r=R+hr = R + h.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Orbital Radius from Center of Mass
  • In Newton's law of universal gravitation and orbital dynamics, rr is always measured from the center of the central body: r=Rbody+hr = R_{\text{body}} + h.

  • Whenever a problem specifies an altitude hh above a surface of radius RR, write r=R+hr = R + h as your first step before applying any dynamical formulas.

Match Exponent Orders of Magnitude
  • Before adding radius and altitude, express both in the same power of ten to avoid decimal alignment mistakes.

  • Convert h=6.40×105 m=0.640×106 mh = 6.40 \times 10^5\text{ m} = 0.640 \times 10^6\text{ m} so that r=(6.371+0.640)×106 m=7.011×106 mr = (6.371 + 0.640) \times 10^6\text{ m} = 7.011 \times 10^6\text{ m}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the total orbital radius: r=R+h=6.371×106 m+0.640×106 m=7.011×106 mr = R + h = 6.371 \times 10^6\text{ m} + 0.640 \times 10^6\text{ m} = 7.011 \times 10^6\text{ m}.

  2. Calculate the orbital speed: v=GMr=(6.674×10−11)(5.972×1024)7.011×106≈7.54×103 m/sv = \sqrt{\frac{GM}{r}} = \sqrt{\frac{(6.674 \times 10^{-11})(5.972 \times 10^{24})}{7.011 \times 10^6}} \approx 7.54 \times 10^3\text{ m/s}.

  3. Calculate the orbital period: T=2πrv=2π(7.011×106)7.54×103≈5844 sT = \frac{2\pi r}{v} = \frac{2\pi (7.011 \times 10^6)}{7.54 \times 10^3} \approx 5844\text{ s}.

  4. Convert to minutes: T=5844 s60 s/min≈97.3 minT = \frac{5844\text{ s}}{60\text{ s/min}} \approx 97.3\text{ min}.

Final answer

(a) v=7.54×103 m/sv = 7.54 \times 10^3\text{ m/s}; (b) T=97.3 minT = 97.3\text{ min}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a quick diagram of the planet showing the center, radius RR, and altitude hh whenever solving satellite problems.

  • Practice identifying whether a given distance in orbital mechanics represents altitude hh, surface radius RR, or total orbital distance rr.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to convert the final orbital period from seconds into minutes.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    r=R+h=6.371×106+6.40×105=7.011×106 mr = R + h = 6.371 \times 10^6 + 6.40 \times 10^5 = 7.011 \times 10^6\text{ m}

  2. Step 2

    v=GMr  ⟹  v=6.674×10−11×5.972×10247.011×106  ⟹  v=7539 m/sv = \sqrt{\frac{GM}{r}} \implies v = \sqrt{\frac{6.674 \times 10^{-11} \times 5.972 \times 10^{24}}{7.011 \times 10^6}} \implies v = 7539\text{ m/s}

  3. Step 3

    T=2πrv  ⟹  T=2π×7.011×1067539  ⟹  T=5843 minT = \frac{2\pi r}{v} \implies T = \frac{2\pi \times 7.011 \times 10^6}{7539} \implies T = 5843\text{ min}

    Correct

    T=2πrv≈5843 s  ⟹  T=5843 s60 s/min≈97.4 minT = \frac{2\pi r}{v} \approx 5843\text{ s} \implies T = \frac{5843\text{ s}}{60\text{ s/min}} \approx 97.4\text{ min} (or 97.3 min97.3\text{ min})

    Using values in meters and meters per second yields the period in seconds, not minutes. You needed to divide 5843 s5843\text{ s} by 60 s/min60\text{ s/min} to obtain approximately 97.4 min97.4\text{ min}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly summed the planetary radius and altitude to find the orbital radius from the center of mass.

You correctly derived and evaluated the orbital speed formula using standard gravitational parameters.

You correctly set up the circular orbital period formula T=2πrvT = \frac{2\pi r}{v}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Unit Conversion

You wrote down min\text{min} as the unit for the direct output of T=2πrvT = \frac{2\pi r}{v} instead of converting from seconds.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

SI kinematic equations inherently output time in seconds when inputs are in meters and meters per second. When a non-SI unit like minutes or hours is requested, an explicit unit conversion step is required.

REASONING PATH
Your ACEpath teacher’s suggested approach
Track Base SI Units
  • In standard SI calculations (rr in m\text{m}, vv in m/s\text{m/s}), time tt or period TT is always obtained in seconds (s\text{s}).

  • Label the raw result of 2πrv\frac{2\pi r}{v} with seconds first before converting.

Convert to Requested Units
  • 1 min=60 s1\text{ min} = 60\text{ s}, so Tmin=Ts60T_{\text{min}} = \frac{T_{\text{s}}}{60}.

  • Divide the calculated seconds by 6060 whenever the problem specifies minutes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. T=2π(7.011×106 m)7539 m/s≈5843.4 sT = \frac{2\pi (7.011 \times 10^6\text{ m})}{7539\text{ m/s}} \approx 5843.4\text{ s}

  2. T=5843.4 s60 s/min≈97.4 minT = \frac{5843.4\text{ s}}{60\text{ s/min}} \approx 97.4\text{ min}

Final answer

(a) v=7.54×103 m/sv = 7.54 \times 10^3\text{ m/s}; (b) T=97.4 minT = 97.4\text{ min} (or 97.3 min97.3\text{ min})

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the unit s\text{s} immediately after evaluating any orbital period formula using SI quantities.

  • Reread the final question sentence to verify whether the final answer requires seconds, minutes, or hours before boxing it.

Lock it in

Similar question

01

A space telescope orbits Earth in a circular orbit at an altitude of h=5.50×105 mh = 5.50 \times 10^5\text{ m}. Given MEarth=5.972×1024 kgM_{\text{Earth}} = 5.972 \times 10^{24}\text{ kg}, REarth=6.371×106 mR_{\text{Earth}} = 6.371 \times 10^6\text{ m}, and G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2, find its orbital speed vv.

Answer

v≈7.59×103 m/sv \approx 7.59 \times 10^3\text{ m/s}. Key step: r=R+h=6.371×106 m+0.550×106 m=6.921×106 mr = R + h = 6.371 \times 10^6\text{ m} + 0.550 \times 10^6\text{ m} = 6.921 \times 10^6\text{ m}, then v=GM/r=(3.9857×1014)/(6.921×106)≈7.59×103 m/sv = \sqrt{GM/r} = \sqrt{(3.9857 \times 10^{14})/(6.921 \times 10^6)} \approx 7.59 \times 10^3\text{ m/s}.

02

A weather satellite circles Mars at an altitude of h=8.50×105 mh = 8.50 \times 10^5\text{ m}. Mars has mass M=6.417×1023 kgM = 6.417 \times 10^{23}\text{ kg} and mean radius R=3.390×106 mR = 3.390 \times 10^6\text{ m}. Calculate both the orbital radius rr and the orbital period TT in hours.

Answer

r=4.240×106 mr = 4.240 \times 10^6\text{ m}, T≈2.34 hT \approx 2.34\text{ h}. Key steps: r=3.390×106+0.850×106=4.240×106 mr = 3.390 \times 10^6 + 0.850 \times 10^6 = 4.240 \times 10^6\text{ m}. Then v=GM/r=(6.674×10−11)(6.417×1023)/(4.240×106)≈3179 m/sv = \sqrt{GM/r} = \sqrt{(6.674 \times 10^{-11})(6.417 \times 10^{23})/(4.240 \times 10^6)} \approx 3179\text{ m/s}. T=2πrv=2π(4.240×106)3179≈8379 s≈2.33 hT = \frac{2\pi r}{v} = \frac{2\pi(4.240 \times 10^6)}{3179} \approx 8379\text{ s} \approx 2.33\text{ h} (or via Kepler's third law T=2πr3/(GM)≈2.34 hT = 2\pi\sqrt{r^3/(GM)} \approx 2.34\text{ h}).

03

A communications satellite in a circular orbit around Earth has an orbital period of T=12.0 h=43200 sT = 12.0\text{ h} = 43200\text{ s}. Using M=5.972×1024 kgM = 5.972 \times 10^{24}\text{ kg}, R=6.371×106 mR = 6.371 \times 10^6\text{ m}, and G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2, determine the satellite's altitude hh above Earth's surface.

Answer

h≈2.02×107 mh \approx 2.02 \times 10^7\text{ m} (or 20200 km20200\text{ km}). Key steps: From Kepler's third law, r3=GMT24π2=(3.9857×1014)(43200)24π2≈1.884×1022 m3r^3 = \frac{GM T^2}{4\pi^2} = \frac{(3.9857 \times 10^{14})(43200)^2}{4\pi^2} \approx 1.884 \times 10^{22}\text{ m}^3, so r≈2.661×107 mr \approx 2.661 \times 10^7\text{ m}. Then subtract Earth's radius: h=r−R=2.661×107−0.6371×107=2.024×107 mh = r - R = 2.661 \times 10^7 - 0.6371 \times 10^7 = 2.024 \times 10^7\text{ m}.

Loading workspace…