Resources

An engineering team is designing an automotive crumple zone for an occupant of mass m=70.0 kgm = 70.0\text{ kg} traveling at an initial velocity of v0=24.0 m/sv_0 = 24.0\text{ m/s} along a straight horizontal path before coming to a complete stop. To prevent severe injury, the biomechanical safety standard requires that the magnitude of the average net deceleration force Fˉnet\bar{F}_{\text{net}} acting on the occupant must not exceed 8,400 N8{,}400\text{ N}. (a) Calculate the minimum impact duration Δtmin\Delta t_{\text{min}} that the safety restraint and crumple zone system must provide to ensure the average force does not exceed this threshold. (b) Assuming uniform acceleration during this minimum time interval, determine the required stopping distance Δx\Delta x over which the occupant comes to rest.

Answer and steps

Final answer

(a) Δtmin=0.200 s\Delta t_{\text{min}} = 0.200\text{ s}, (b) Δx=2.40 m\Delta x = 2.40\text{ m}

Steps

Part (a): Finding the Minimum Impact Duration

  1. State the Impulse-Momentum Theorem: The impulse exerted on an object equals its change in linear momentum: J=FˉnetΔt=Δp=m(v−v0)J = \bar{F}_{\text{net}} \Delta t = \Delta p = m(v - v_0) Taking the direction of initial motion as positive:

    • Initial velocity: v0=+24.0 m/sv_0 = +24.0\text{ m/s}
    • Final velocity: v=0 m/sv = 0\text{ m/s}
    • Mass: m=70.0 kgm = 70.0\text{ kg}
  2. Calculate the Change in Momentum: Δp=m(0−v0)=−mv0=−(70.0 kg)(24.0 m/s)=−1,680 kg⋅m/s\Delta p = m(0 - v_0) = -m v_0 = -(70.0\text{ kg})(24.0\text{ m/s}) = -1{,}680\text{ kg}\cdot\text{m/s} The magnitude of the required impulse is: ∣Δp∣=1,680 N⋅s|\Delta p| = 1{,}680\text{ N}\cdot\text{s}
  3. Determine the Minimum Time Interval: The magnitude of the average force is inversely proportional to the collision time: Fˉnet=∣Δp∣Δt\bar{F}_{\text{net}} = \frac{|\Delta p|}{\Delta t} To ensure that the force does not exceed the maximum allowable threshold (Fˉmax=8,400 N\bar{F}_{\text{max}} = 8{,}400\text{ N}), the duration must satisfy: Δt≥∣Δp∣Fˉmax=1,680 N⋅s8,400 N=0.200 s\Delta t \ge \frac{|\Delta p|}{\bar{F}_{\text{max}}} = \frac{1{,}680\text{ N}\cdot\text{s}}{8{,}400\text{ N}} = 0.200\text{ s} Therefore, the minimum impact duration is: Δtmin=0.200 s\Delta t_{\text{min}} = 0.200\text{ s}

Part (b): Determining the Stopping Distance

  1. Method 1: Average Velocity (Simplest Approach) For motion with uniform (constant) acceleration, the average velocity vˉ\bar{v} over the stopping period is the arithmetic mean of the initial and final velocities: vˉ=v0+v2=24.0 m/s+0 m/s2=12.0 m/s\bar{v} = \frac{v_0 + v}{2} = \frac{24.0\text{ m/s} + 0\text{ m/s}}{2} = 12.0\text{ m/s} The displacement Δx\Delta x is then the product of the average velocity and the impact duration: Δx=vˉΔtmin=(12.0 m/s)(0.200 s)=2.40 m\Delta x = \bar{v} \Delta t_{\text{min}} = (12.0\text{ m/s})(0.200\text{ s}) = 2.40\text{ m}
  2. Method 2: Work-Energy Theorem (Alternative Verification) The net work done on the occupant brings their kinetic energy to zero: Wnet=−FˉnetΔx=0−12mv02W_{\text{net}} = -\bar{F}_{\text{net}} \Delta x = 0 - \frac{1}{2}mv_0^2 Δx=12mv02Fˉnet=12(70.0 kg)(24.0 m/s)28,400 N=20,160 J8,400 N=2.40 m\Delta x = \frac{\frac{1}{2}mv_0^2}{\bar{F}_{\text{net}}} = \frac{\frac{1}{2}(70.0\text{ kg})(24.0\text{ m/s})^2}{8{,}400\text{ N}} = \frac{20{,}160\text{ J}}{8{,}400\text{ N}} = 2.40\text{ m}

Common Pitfall: Do not confuse the total stopping distance Δx\Delta x with the average velocity alone, and ensure the negative signs in momentum change and decelerating force are handled consistently so that time and distance quantities remain positive.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misapplies the kinematic distance formula by using the initial velocity rather than the average velocity for uniform deceleration, resulting in a stopping distance of 4.80 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ∣Δp∣=m∗v0=70.0∗24.0=1680 kg⋅m/s  ⟹  Δtmin=∣Δp∣Fmax=16808400=0.200 s|\Delta p| = m * v_0 = 70.0 * 24.0 = 1680\text{ kg}\cdot\text{m/s} \implies \Delta t_{\text{min}} = \frac{|\Delta p|}{F_{\text{max}}} = \frac{1680}{8400} = 0.200\text{ s}

  2. Step 2

    Δ\Delta x = v_0 * Δ\Delta t_{min\text{min}}   ⟹  \implies Δ\Delta x = 24.0 * 0.200 = 4.80 m\text{ m}_

    Correct

    Δx=vˉΔtmin=(v0+02)Δtmin=(12.0 m/s)(0.200 s)=2.40 m\Delta x = \bar{v} \Delta t_{\text{min}} = \left(\frac{v_0 + 0}{2}\right) \Delta t_{\text{min}} = (12.0\text{ m/s})(0.200\text{ s}) = 2.40\text{ m}

    You used the initial velocity v0v_0 as if the vehicle moved at a constant speed throughout the impact. Because the occupant undergoes uniform deceleration to rest, the displacement depends on the average velocity vˉ=v0+v2=12.0 m/s\bar{v} = \frac{v_0 + v}{2} = 12.0\text{ m/s}, giving Δx=2.40 m\Delta x = 2.40\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the total change in linear momentum from the mass and initial velocity.

You accurately applied the impulse-momentum theorem to determine the minimum impact time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Constant Velocity vs. Uniform Deceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating constant-speed displacement (Δx=vt\Delta x = v t) with uniformly accelerated motion (Δx=vˉt=v0+v2t\Delta x = \bar{v} t = \frac{v_0 + v}{2} t).

REASONING PATH
Your ACEpath teacher’s suggested approach
Average Velocity Check
  • For constant acceleration from v0v_0 to 00, the average velocity is vˉ=v02\bar{v} = \frac{v_0}{2}, not v0v_0.

  • Always verify whether the object changes speed before choosing a kinematic formula.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the final velocity v=0 m/sv = 0\text{ m/s} and calculate average velocity: vˉ=v0+v2=24.0 m/s+02=12.0 m/s\bar{v} = \frac{v_0 + v}{2} = \frac{24.0\text{ m/s} + 0}{2} = 12.0\text{ m/s}.

  2. Multiply average velocity by the stopping time: Δx=vˉΔtmin=(12.0 m/s)(0.200 s)=2.40 m\Delta x = \bar{v} \Delta t_{\text{min}} = (12.0\text{ m/s})(0.200\text{ s}) = 2.40\text{ m}.

Final answer

(a) Δtmin=0.200 s\Delta t_{\text{min}} = 0.200\text{ s}, (b) Δx=2.40 m\Delta x = 2.40\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • When solving for displacement during braking or collisions, sketch a quick v–tv\text{--}t triangle to confirm whether the area under the curve is a rectangle (v0tv_0 t) or a triangle (12v0t\frac{1}{2}v_0 t).

  • Cross-check braking distance problems using the Work-Energy Theorem: Wnet=−FˉΔx=0−12mv02W_{\text{net}} = -\bar{F}\Delta x = 0 - \frac{1}{2}m v_0^2.

OverviewACEpath Teacher's Diagnosis

02 The student confuses momentum with kinetic energy in the impulse relation, dividing kinetic energy by force to find the time duration and obtaining 2.40 s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Ek=12⋅m⋅v02=20160 J  ⟹  Δtmin⁡=EkFmax⁡=201608400=2.40 sE_k = \frac{1}{2} \cdot m \cdot v_0^2 = 20160\text{ J} \implies \Delta t_{\min} = \frac{E_k}{F_{\max}} = \frac{20160}{8400} = 2.40\text{ s}

    Correct

    Δp=mv0=(70.0 kg)(24.0 m/s)=1680 kg⋅m/s  ⟹  Δtmin⁡=ΔpFˉnet=1680 N⋅s8400 N=0.200 s\Delta p = m v_0 = (70.0\text{ kg})(24.0\text{ m/s}) = 1680\text{ kg}\cdot\text{m/s} \implies \Delta t_{\min} = \frac{\Delta p}{\bar{F}_{\text{net}}} = \frac{1680\text{ N}\cdot\text{s}}{8400\text{ N}} = 0.200\text{ s}

    You divided kinetic energy by force to find time, but force multiplied by time equals impulse (change in momentum, J=Δp=mΔvJ = \Delta p = m\Delta v), not energy. Dividing kinetic energy by force gives the stopping distance (W=FΔxW = F\Delta x), which has units of meters rather than seconds.

  2. Step 2

    vavg=24.0+02=12.0 m/sv_{\text{avg}} = \frac{24.0 + 0}{2} = 12.0\text{ m/s}

  3. Step 3

    Δx=vavg⋅Δt=12.0⋅2.40=28.8 m\Delta x = v_{\text{avg}} \cdot \Delta t = 12.0 \cdot 2.40 = 28.8\text{ m}

    Correct

    Δx=vˉΔtmin⁡=(12.0 m/s)(0.200 s)=2.40 m\Delta x = \bar{v} \Delta t_{\min} = (12.0\text{ m/s})(0.200\text{ s}) = 2.40\text{ m}

    Your kinematic method for displacement was set up correctly, but substituting the incorrect time interval of 2.40 s2.40\text{ s} from Step 1 caused the final stopping distance to be too large.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the initial kinetic energy of the occupant.

You correctly applied the average velocity formula for constant deceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Momentum-Energy Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the impulse-momentum theorem (FΔt=ΔpF\Delta t = \Delta p) with the work-energy theorem (FΔx=ΔEkF\Delta x = \Delta E_k). As a result, you divided energy by force expecting a time duration, when EnergyForce\frac{\text{Energy}}{\text{Force}} actually yields distance.

REASONING PATH
Your ACEpath teacher’s suggested approach
Impulse relates Force to Time
  • Impulse is force integrated over time: J=FˉΔt=Δp=mΔvJ = \bar{F}\Delta t = \Delta p = m\Delta v.

  • Whenever solving for collision duration Δt\Delta t from a force constraint, calculate momentum change Δp=mΔv\Delta p = m\Delta v first.

Work relates Force to Distance
  • Work is force acting over distance: W=FˉΔx=ΔEk=12m(v2−v02)W = \bar{F}\Delta x = \Delta E_k = \frac{1}{2}m(v^2 - v_0^2).

  • Use kinetic energy when you want to relate force directly to stopping distance Δx\Delta x, not time Δt\Delta t.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the magnitude of momentum change: ∣Δp∣=mv0=(70.0 kg)(24.0 m/s)=1680 kg⋅m/s|\Delta p| = m v_0 = (70.0\text{ kg})(24.0\text{ m/s}) = 1680\text{ kg}\cdot\text{m/s}.

  2. Apply the impulse-momentum relation to find the minimum time: Δtmin⁡=∣Δp∣Fˉmax⁡=1680 N⋅s8400 N=0.200 s\Delta t_{\min} = \frac{|\Delta p|}{\bar{F}_{\max}} = \frac{1680\text{ N}\cdot\text{s}}{8400\text{ N}} = 0.200\text{ s}.

  3. Substitute Δtmin⁡=0.200 s\Delta t_{\min} = 0.200\text{ s} into the displacement formula: Δx=vˉΔtmin⁡=(12.0 m/s)(0.200 s)=2.40 m\Delta x = \bar{v}\Delta t_{\min} = (12.0\text{ m/s})(0.200\text{ s}) = 2.40\text{ m}.

Final answer

(a) Δtmin⁡=0.200 s\Delta t_{\min} = 0.200\text{ s}, (b) Δx=2.40 m\Delta x = 2.40\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Check dimensional units after dividing: JN=N⋅mN=m\frac{\text{J}}{\text{N}} = \frac{\text{N}\cdot\text{m}}{\text{N}} = \text{m}, which is a length, whereas N⋅sN=s\frac{\text{N}\cdot\text{s}}{\text{N}} = \text{s} gives time.

  • Remember the pair: Impulse (FΔtF\Delta t) pairs with Momentum (pp), while Work (FΔxF\Delta x) pairs with Energy (EkE_k).

OverviewACEpath Teacher's Diagnosis

03 The student omits the factor of 1/2 when using the work-energy theorem to determine the stopping distance from force and velocity, calculating Δx as 4.80 m.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δp=m⋅v0=70.0⋅24.0=1680 N⋅s  ⟹  Δtmin=16808400=0.200 s\Delta p = m \cdot v_0 = 70.0 \cdot 24.0 = 1680\text{ N}\cdot\text{s} \implies \Delta t_{\text{min}} = \frac{1680}{8400} = 0.200\text{ s}

  2. Step 2

    W=F⋅Δx=m⋅v02W = F \cdot \Delta x = m \cdot v_0^2

    Correct

    W=F⋅Δx=ΔK=12mv02W = F \cdot \Delta x = \Delta K = \frac{1}{2} m v_0^2

    Translational kinetic energy is defined as K=12mv2K = \frac{1}{2}mv^2, not mv2mv^2. The work done by the braking force must equal the total initial kinetic energy 12mv02\frac{1}{2} m v_0^2.

  3. Step 3

    Δx=m⋅v02F=70.0⋅24.028400=403208400=4.80 m\Delta x = \frac{m \cdot v_0^2}{F} = \frac{70.0 \cdot 24.0^2}{8400} = \frac{40320}{8400} = 4.80\text{ m}

    Correct

    Δx=12mv02F=20160 J8400 N=2.40 m\Delta x = \frac{\frac{1}{2} m v_0^2}{F} = \frac{20160\text{ J}}{8400\text{ N}} = 2.40\text{ m}

    Your algebraic rearrangement and arithmetic were carried out correctly, but the result is twice the correct value due to the missing factor of 12\frac{1}{2} in the initial equation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of the momentum change as 1680 N⋅s1680\text{ N}\cdot\text{s}.

You accurately related impulse and average force to find the minimum impact time of 0.200 s0.200\text{ s}.

You recognized that work done by the stopping force dissipates the occupant's kinetic energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of kinetic energy factor 1/2

You wrote the kinetic energy expression as mv02m v_0^2 instead of 12mv02\frac{1}{2} m v_0^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing kinetic energy K=12mv2K = \frac{1}{2} m v^2 with momentum-like squared terms or forgetting the fractional coefficient 12\frac{1}{2} leads to overestimating the required energy absorption and distance by a factor of 2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Formula Recall for Kinetic Energy
  • Translational kinetic energy is always K=12mv2K = \frac{1}{2} m v^2.

  • Whenever you equate mechanical work to kinetic energy change, write out Wnet=ΔK=12mvf2−12mvi2W_{\text{net}} = \Delta K = \frac{1}{2} m v_f^2 - \frac{1}{2} m v_i^2 before substituting numerical values.

Kinematic Cross-Check
  • For uniform deceleration to rest, average velocity is vˉ=v0+02=v02\bar{v} = \frac{v_0 + 0}{2} = \frac{v_0}{2}, so stopping distance is Δx=vˉΔt=12v0Δt\Delta x = \bar{v} \Delta t = \frac{1}{2} v_0 \Delta t.

  • Cross-check work-energy results with Δx=12(24.0 m/s)(0.200 s)=2.40 m\Delta x = \frac{1}{2}(24.0\text{ m/s})(0.200\text{ s}) = 2.40\text{ m} to immediately catch missing factors of 12\frac{1}{2}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the work-energy theorem: W=F⋅Δx=12mv02W = F \cdot \Delta x = \frac{1}{2} m v_0^2.

  2. Substitute the given mass and speed: W=12(70.0 kg)(24.0 m/s)2=20,160 JW = \frac{1}{2}(70.0\text{ kg})(24.0\text{ m/s})^2 = 20{,}160\text{ J}.

  3. Solve for stopping distance: Δx=20,160 J8,400 N=2.40 m\Delta x = \frac{20{,}160\text{ J}}{8{,}400\text{ N}} = 2.40\text{ m}.

Final answer

(a) Δtmin=0.200 s\Delta t_{\text{min}} = 0.200\text{ s}, (b) Δx=2.40 m\Delta x = 2.40\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the formal definition of translational kinetic energy (K=12mv2K = \frac{1}{2} m v^2) and memorize its integration origin from W=∫mv dvW = \int m v \, dv.

  • Use kinematics with average velocity (Δx=vˉΔt\Delta x = \bar{v} \Delta t) as an independent sanity check on any work-energy stopping distance problem.

Lock it in

Similar question

01

A 1,200 kg1{,}200\text{ kg} test car traveling at 18.0 m/s18.0\text{ m/s} crashes into a barrier and decelerates uniformly to rest in 0.150 s0.150\text{ s}. Determine: (a) the magnitude of the average net force exerted on the car, and (b) the crumple distance Δx\Delta x of the vehicle front.

Answer

(a) ∣Δp∣=mv0=(1,200)(18.0)=21,600 N⋅s|\Delta p| = m v_0 = (1{,}200)(18.0) = 21{,}600\text{ N}\cdot\text{s}. Thus, Fˉ=21,600 N⋅s0.150 s=144,000 N=1.44×105 N\bar{F} = \frac{21{,}600\text{ N}\cdot\text{s}}{0.150\text{ s}} = 144{,}000\text{ N} = 1.44 \times 10^5\text{ N}. (b) Using average velocity: Δx=(18.0+02)(0.150)=(9.00)(0.150)=1.35 m\Delta x = \left(\frac{18.0 + 0}{2}\right)(0.150) = (9.00)(0.150) = 1.35\text{ m}.

02

An occupant wearing a seatbelt is brought to rest from v0=20.0 m/sv_0 = 20.0\text{ m/s} over a stopping distance of Δx=0.800 m\Delta x = 0.800\text{ m} with constant deceleration. (a) Find the duration of the impact Δt\Delta t. (b) If the occupant's mass is 65.0 kg65.0\text{ kg}, find the magnitude of the average net force acting on them.

Answer

(a) vˉ=20.0+02=10.0 m/s\bar{v} = \frac{20.0 + 0}{2} = 10.0\text{ m/s}. Thus, Δt=Δxvˉ=0.800 m10.0 m/s=0.0800 s\Delta t = \frac{\Delta x}{\bar{v}} = \frac{0.800\text{ m}}{10.0\text{ m/s}} = 0.0800\text{ s}. (b) ∣Δp∣=(65.0 kg)(20.0 m/s)=1,300 N⋅s|\Delta p| = (65.0\text{ kg})(20.0\text{ m/s}) = 1{,}300\text{ N}\cdot\text{s}. Therefore, Fˉ=1,300 N⋅s0.0800 s=16,250 N≈1.63×104 N\bar{F} = \frac{1{,}300\text{ N}\cdot\text{s}}{0.0800\text{ s}} = 16{,}250\text{ N} \approx 1.63 \times 10^4\text{ N}.

03

Two safety designs are evaluated for an initial speed of v0=16.0 m/sv_0 = 16.0\text{ m/s} bringing a driver to a complete stop: Design A allows a crumple distance of ΔxA=0.640 m\Delta x_A = 0.640\text{ m}, while Design B extends the crumple distance to ΔxB=1.28 m\Delta x_B = 1.28\text{ m}. Assuming uniform deceleration for both, calculate the ratio of the average stopping force in Design A to that in Design B (FˉA/FˉB\bar{F}_A / \bar{F}_B).

Answer

By the Work-Energy Theorem, FˉΔx=12mv02\bar{F}\Delta x = \frac{1}{2}m v_0^2, so Fˉ∝1Δx\bar{F} \propto \frac{1}{\Delta x} for a fixed initial kinetic energy. Therefore, FˉAFˉB=ΔxBΔxA=1.28 m0.640 m=2.00\frac{\bar{F}_A}{\bar{F}_B} = \frac{\Delta x_B}{\Delta x_A} = \frac{1.28\text{ m}}{0.640\text{ m}} = 2.00. Doubling the crumple distance halves the average impact force.

Loading workspace…