Resources

A siphon of uniform internal diameter d=2.50 cmd = 2.50\text{ cm} is used to empty a very large reservoir of water (ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3). The inlet of the siphon tube is submerged below the liquid surface, and the tube arches over the reservoir rim reaching a maximum crest height hcresth_{\text{crest}} above the reservoir free surface before descending down to an open discharge nozzle. The discharge nozzle exits into the atmosphere at a vertical distance H=2.80 mH = 2.80\text{ m} below the reservoir surface. Assuming ambient atmospheric pressure Patm=1.013×105 PaP_{\text{atm}} = 1.013\times 10^5\text{ Pa}, the water's vapor pressure Pvap=2.34×103 PaP_{\text{vap}} = 2.34\times 10^3\text{ Pa}, and g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the theoretical maximum elevation limit hcrest,max⁡h_{\text{crest},\max} of the siphon crest above the reservoir surface before the liquid column ruptures due to cavitation.

Answer and steps

Final answer

hcrest,max⁡=10.1 mh_{\text{crest},\max} = 10.1\text{ m}

Steps

01

Condition for Siphon Operation and Cavitation

A siphon operates because the ambient atmospheric pressure PatmP_{\text{atm}} acts on the open surface of the reservoir and pushes the liquid up the inlet arm against gravity.

As the liquid rises toward the crest (the highest point of the siphon at height hcresth_{\text{crest}} above the reservoir surface), the internal hydrostatic pressure decreases. If the absolute pressure inside the tube drops to the saturation vapor pressure of the liquid (PvapP_{\text{vap}}), the water will boil at ambient temperature. Vapor bubbles form, rupture the continuous liquid column, and cause the siphon action to cease (cavitation).

Therefore, the condition to prevent cavitation at the crest is: Pcrest≥PvapP_{\text{crest}} \ge P_{\text{vap}}

The theoretical maximum elevation of the crest occurs when the pressure at the crest drops precisely to the vapor pressure: Pcrest=PvapP_{\text{crest}} = P_{\text{vap}}


02

Derivation of the Maximum Elevation Limit

Consider the liquid at the reservoir free surface (Point 00) and at the crest of the siphon (Point 11):

  • At the free surface of the very large reservoir, the pressure is atmospheric: P0=PatmP_0 = P_{\text{atm}}.
  • The theoretical maximum height hcrest,max⁡h_{\text{crest},\max} that atmospheric pressure can sustain a continuous column of water above the free surface corresponds to the maximum barometric lift of the liquid column:

Patm−Pcrest=ρghcrest,max⁡P_{\text{atm}} - P_{\text{crest}} = \rho g h_{\text{crest},\max}

Setting Pcrest=PvapP_{\text{crest}} = P_{\text{vap}}:

Patm−Pvap=ρghcrest,max⁡P_{\text{atm}} - P_{\text{vap}} = \rho g h_{\text{crest},\max}

Solving for hcrest,max⁡h_{\text{crest},\max}:

hcrest,max⁡=Patm−Pvapρgh_{\text{crest},\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g}


03

Numerical Calculation

Substitute the given numerical values:

  • Patm=1.013×105 PaP_{\text{atm}} = 1.013 \times 10^5\text{ Pa}
  • Pvap=2.34×103 PaP_{\text{vap}} = 2.34 \times 10^3\text{ Pa}
  • ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3
  • g=9.80 m/s2g = 9.80\text{ m/s}^2

Calculate the available pressure difference: Patm−Pvap=101,300 Pa−2,340 Pa=98,960 PaP_{\text{atm}} - P_{\text{vap}} = 101{,}300\text{ Pa} - 2{,}340\text{ Pa} = 98{,}960\text{ Pa}

Calculate the weight density of water: ρg=1000 kg/m3×9.80 m/s2=9800 N/m3\rho g = 1000\text{ kg/m}^3 \times 9.80\text{ m/s}^2 = 9800\text{ N/m}^3

Now, evaluate the maximum crest height: hcrest,max⁡=98,960 Pa9800 N/m3≈10.098 m≈10.1 mh_{\text{crest},\max} = \frac{98{,}960\text{ Pa}}{9800\text{ N/m}^3} \approx 10.098\text{ m} \approx 10.1\text{ m}


04

Operational Note on Dynamic Effects

In an actively running, unrestricted siphon with discharge at depth HH, Bernoulli's equation shows that dynamic pressure (12ρv2=ρgH\frac{1}{2}\rho v^2 = \rho g H) further reduces the local static pressure at the crest to Pcrest=Patm−ρg(hcrest+H)P_{\text{crest}} = P_{\text{atm}} - \rho g(h_{\text{crest}} + H). This means that during free, high-speed flow, cavitation would initiate at a lower crest height (hcrest≈10.1 m−2.8 m=7.3 mh_{\text{crest}} \approx 10.1\text{ m} - 2.8\text{ m} = 7.3\text{ m}). However, the absolute theoretical upper limit of elevation above the reservoir surface that water can physically reach in a siphon before boiling spontaneously is determined by the maximum barometric lift, hcrest,max⁡=10.1 mh_{\text{crest},\max} = 10.1\text{ m}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student neglects the kinetic energy of the flowing water at the crest, treating the column as a static fluid column supported by pressure difference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Correct
  1. Step 1

    Patm−Pcrest=ρghcrest  ⟹  Set Pcrest=Pvap for cavitation limitP_{\text{atm}} - P_{\text{crest}} = \rho g h_{\text{crest}} \implies \text{Set } P_{\text{crest}} = P_{\text{vap}} \text{ for cavitation limit}

  2. Step 2

    hcrest,max⁡=Patm−Pvapρgh_{\text{crest},\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g}

  3. Step 3

    hcrest,max⁡=1.013×105−2.34×1031000×9.80=989609800=10.10 mh_{\text{crest},\max} = \frac{1.013 \times 10^5 - 2.34 \times 10^3}{1000 \times 9.80} = \frac{98960}{9800} = 10.10\text{ m}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that cavitation initiates when the crest pressure drops to the saturation vapor pressure PvapP_{\text{vap}}.

You properly formulated the barometric pressure balance across the liquid elevation.

You carried out the arithmetic precisely with appropriate units and significant figures.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how fluid velocity in an actively discharging siphon introduces a dynamic pressure drop 12ρv2\frac{1}{2}\rho v^2 via Bernoulli's equation, which further lowers the operational crest limit.

  • Practice solving siphon problems where both friction losses and dynamic flow speeds are accounted for at the crest.

OverviewACEpath Teacher's Diagnosis

02 The student assumes cavitation occurs at zero absolute pressure (perfect vacuum) rather than at the vapor pressure of water.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=2gH=2×9.80×2.80=7.41 m/s  ⟹  Patm=Pcrest+12ρv2+ρghcrestv = \sqrt{2gH} = \sqrt{2 \times 9.80 \times 2.80} = 7.41\text{ m/s} \implies P_{\text{atm}} = P_{\text{crest}} + \frac{1}{2}\rho v^2 + \rho g h_{\text{crest}}

  2. Step 2

    For maximum height, assume complete vacuum at crest so Pcrest=0P_{\text{crest}} = 0

    Correct

    Pcrest=Pvap=2.34×103 PaP_{\text{crest}} = P_{\text{vap}} = 2.34\times 10^3\text{ Pa}

    Cavitation does not require a complete vacuum (P=0P=0). Water boils spontaneously and ruptures the liquid column as soon as the local static pressure drops to its saturation vapor pressure, Pcrest=PvapP_{\text{crest}} = P_{\text{vap}}.

  3. Step 3

    hcrest,max⁡=Patmρg−H  ⟹  hcrest,max⁡=1.013×1051000×9.80−2.80  ⟹  hcrest,max⁡=10.34−2.80=7.54 mh_{\text{crest},\max} = \frac{P_{\text{atm}}}{\rho g} - H \implies h_{\text{crest},\max} = \frac{1.013\times 10^5}{1000\times 9.80} - 2.80 \implies h_{\text{crest},\max} = 10.34 - 2.80 = 7.54\text{ m}

    Correct

    hcrest,max⁡=Patm−Pvapρg=1.013×105 Pa−2.34×103 Pa1000 kg/m3×9.80 m/s2≈10.1 mh_{\text{crest},\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} = \frac{1.013\times 10^5\text{ Pa} - 2.34\times 10^3\text{ Pa}}{1000\text{ kg/m}^3 \times 9.80\text{ m/s}^2} \approx 10.1\text{ m}

    Because you set Pcrest=0P_{\text{crest}} = 0 and subtracted the discharge depth HH, your final calculated height was 7.54 m7.54\text{ m} instead of the theoretical barometric lift limit of 10.1 m10.1\text{ m}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled Bernoulli's principle along a streamline.

You accurately computed the Torricelli exit velocity as 7.41 m/s7.41\text{ m/s}.

You performed the arithmetic accurately based on your assumed equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Cavitation threshold set to vacuum instead of vapor pressure

You substituted Pcrest=0P_{\text{crest}} = 0 assuming cavitation requires a complete vacuum.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating cavitation with a complete vacuum rather than phase-change boiling at the saturation vapor pressure PvapP_{\text{vap}}, as well as confusing the dynamic running-flow pressure reduction with the theoretical maximum barometric elevation limit sustained by atmospheric pressure.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cavitation Pressure Threshold
  • A liquid column cavitates when local absolute pressure drops to its saturation vapor pressure: Pmin=PvapP_{\text{min}} = P_{\text{vap}}, not P=0P = 0.

  • Always set the minimum allowable pressure to the liquid's vapor pressure PvapP_{\text{vap}} at the given operating temperature.

Theoretical Elevation Limit
  • The absolute upper bound on elevation that atmospheric pressure can lift a liquid column against gravity is given by hmax⁡=Patm−Pvapρgh_{\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g}.

  • Identify whether the problem asks for the theoretical maximum barometric lift limit or an unrestricted dynamic flow limit.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the pressure at the siphon crest to the vapor pressure: Pcrest=Pvap=2.34×103 PaP_{\text{crest}} = P_{\text{vap}} = 2.34 \times 10^3\text{ Pa}.

  2. Balance the available atmospheric pressure head against the liquid column: Patm−Pvap=ρghcrest,max⁡P_{\text{atm}} - P_{\text{vap}} = \rho g h_{\text{crest},\max}.

  3. Compute the available pressure difference: Patm−Pvap=101,300 Pa−2,340 Pa=98,960 PaP_{\text{atm}} - P_{\text{vap}} = 101{,}300\text{ Pa} - 2{,}340\text{ Pa} = 98{,}960\text{ Pa}.

  4. Divide by the specific weight: hcrest,max⁡=98,960 Pa1000 kg/m3×9.80 m/s2=10.098 m≈10.1 mh_{\text{crest},\max} = \frac{98{,}960\text{ Pa}}{1000\text{ kg/m}^3 \times 9.80\text{ m/s}^2} = 10.098\text{ m} \approx 10.1\text{ m}.

Final answer

hcrest,max⁡=10.1 mh_{\text{crest},\max} = 10.1\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the physical definition of cavitation as boiling induced by low pressure at ambient temperature.

  • Practice identifying the difference between barometric height limits (Patm−Pvap=ρghP_{\text{atm}} - P_{\text{vap}} = \rho g h) and flowing Bernoulli pressure drops.

OverviewACEpath Teacher's Diagnosis

03 The student adds the discharge depth H instead of subtracting it when rearranging Bernoulli's equation for the maximum crest height.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    v=2gH=2×9.80×2.80=7.41 m/sv = \sqrt{2gH} = \sqrt{2 \times 9.80 \times 2.80} = 7.41\text{ m/s}

  2. Step 2

    Patm=Pvap+(12)ρv2+ρghcrestP_{\text{atm}} = P_{\text{vap}} + \left(\frac{1}{2}\right)\rho v^2 + \rho g h_{\text{crest}}

  3. Step 3

    Patm−Pvap=ρg(hcrest−H)  ⟹  hcrest,max⁡=Patm−Pvapρg+HP_{\text{atm}} - P_{\text{vap}} = \rho g (h_{\text{crest}} - H) \implies h_{\text{crest},\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} + H

    Correct

    hcrest,max⁡=Patm−Pvapρg≈10.1 mh_{\text{crest},\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} \approx 10.1\text{ m} (or hcrest=Patm−Pvapρg−Hh_{\text{crest}} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} - H under unrestricted free flow)

    When substituting 12ρv2=ρgH\frac{1}{2}\rho v^2 = \rho g H into your equation, both potential and kinetic terms are positive on the right-hand side: Patm−Pvap=ρg(hcrest+H)P_{\text{atm}} - P_{\text{vap}} = \rho g(h_{\text{crest}} + H). Rearranging for hcresth_{\text{crest}} requires subtracting HH, not adding it. Furthermore, the absolute theoretical maximum elevation that atmospheric pressure can lift a continuous water column is the static barometric limit hcrest,max⁡=Patm−Pvapρgh_{\text{crest},\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g}.

  4. Step 4

    hcrest,max⁡=1.013×105−2.34×1039800+2.80  ⟹  hcrest,max⁡=10.10+2.80=12.90 mh_{\text{crest},\max} = \frac{1.013 \times 10^5 - 2.34 \times 10^3}{9800} + 2.80 \implies h_{\text{crest},\max} = 10.10 + 2.80 = 12.90\text{ m}

    Correct

    hcrest,max⁡=101,300−23409800≈10.1 mh_{\text{crest},\max} = \frac{101{,}300 - 2340}{9800} \approx 10.1\text{ m}

    This step evaluated your incorrect expression from Step 3. Because ambient atmospheric pressure can only support a water column of roughly 10.1 m10.1\text{ m}, an answer of 12.90 m12.90\text{ m} is physically impossible.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that cavitation occurs when the internal pressure at the crest drops to the vapor pressure PvapP_{\text{vap}}.

You accurately computed the discharge speed using Torricelli's law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in Bernoulli equation rearrangement

You substituted 12ρv2=ρgH\frac{1}{2}\rho v^2 = \rho g H into the crest pressure balance as (hcrest−H)(h_{\text{crest}} - H) instead of (hcrest+H)(h_{\text{crest}} + H), flipping the sign of HH.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You overlooked the physical ceiling imposed by atmospheric pressure: atmospheric pressure must simultaneously support the elevation head ρgh\rho g h and provide the kinetic energy 12ρv2\frac{1}{2}\rho v^2. Both demands deplete the available pressure, so increasing flow speed or outlet depth reduces the allowable crest height rather than increasing it. The theoretical upper limit occurs when flow velocity approaches zero, giving the maximum barometric height Patm−Pvapρg=10.1 m\frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} = 10.1\text{ m}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Sanity Check Against Barometric Limit
  • Atmospheric pressure Patm≈101.3 kPaP_{\text{atm}} \approx 101.3\text{ kPa} cannot lift liquid water higher than hbaro=Patmρg≈10.33 mh_{\text{baro}} = \frac{P_{\text{atm}}}{\rho g} \approx 10.33\text{ m} under any circumstances.

  • Always verify that your calculated siphon crest height does not exceed 10.1 m10.1\text{ m}–10.3 m10.3\text{ m} for water at sea level.

Pressure Budget Sign Rule
  • At any point elevated above the open liquid surface along a streamline: P=Patm−ρgz−12ρv2P = P_{\text{atm}} - \rho g z - \frac{1}{2}\rho v^2.

  • Ensure that both the elevation term and the kinetic term are subtracted from PatmP_{\text{atm}} when solving for internal pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that atmospheric pressure provides the total head to lift and accelerate the water: Patm−Pvap=ρghcrest+12ρv2P_{\text{atm}} - P_{\text{vap}} = \rho g h_{\text{crest}} + \frac{1}{2}\rho v^2.

  2. The theoretical maximum height occurs at the static limit (or incipient flow threshold) where dynamic head loss is minimized: hcrest,max⁡=Patm−Pvapρgh_{\text{crest},\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g}.

  3. Substitute the given values: hcrest,max⁡=1.013×105 Pa−2.34×103 Pa1000 kg/m3×9.80 m/s2=98,9609800≈10.1 mh_{\text{crest},\max} = \frac{1.013\times 10^5\text{ Pa} - 2.34\times 10^3\text{ Pa}}{1000\text{ kg/m}^3 \times 9.80\text{ m/s}^2} = \frac{98{,}960}{9800} \approx 10.1\text{ m}.

Final answer

hcrest,max⁡=10.1 mh_{\text{crest},\max} = 10.1\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the relationship between dynamic pressure and static pressure along a streamline in open siphon systems.

  • Practice performing order-of-magnitude physical limit checks (such as maximum barometric height) on hydrodynamics problems before finalizing your answer.

Lock it in

Similar question

01

A liquid with density ρ=800 kg/m3\rho = 800\text{ kg/m}^3 and vapor pressure Pvap=5.0×103 PaP_{\text{vap}} = 5.0\times 10^3\text{ Pa} is siphoned at an atmospheric pressure of Patm=1.01×105 PaP_{\text{atm}} = 1.01\times 10^5\text{ Pa}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the theoretical maximum static crest height hmax⁡h_{\max} above the liquid surface before cavitation occurs.

Answer

hmax⁡=Patm−Pvapρg=101,000−5,000800×9.80=96,0007840≈12.2 mh_{\max} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} = \frac{101{,}000 - 5{,}000}{800 \times 9.80} = \frac{96{,}000}{7840} \approx 12.2\text{ m}.

02

In the original siphon system (Patm=1.013×105 PaP_{\text{atm}} = 1.013\times 10^5\text{ Pa}, Pvap=2.34×103 PaP_{\text{vap}} = 2.34\times 10^3\text{ Pa}, ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3, g=9.80 m/s2g = 9.80\text{ m/s}^2), water flows freely through a uniform tube discharging at a depth H=2.80 mH = 2.80\text{ m} below the reservoir surface. Assuming ideal steady flow where exit velocity is v=2gHv = \sqrt{2gH}, calculate the operational maximum crest height hcresth_{\text{crest}} before cavitation occurs during active flow.

Answer

hcrest=7.30 mh_{\text{crest}} = 7.30\text{ m}. By Bernoulli's equation along the streamline from the surface to the crest: Patm=Pcrest+12ρv2+ρghcrestP_{\text{atm}} = P_{\text{crest}} + \frac{1}{2}\rho v^2 + \rho g h_{\text{crest}}. Since flow speed is uniform throughout the tube, 12ρv2=ρgH\frac{1}{2}\rho v^2 = \rho g H. Setting Pcrest=PvapP_{\text{crest}} = P_{\text{vap}} yields hcrest=Patm−Pvapρg−H=10.10 m−2.80 m=7.30 mh_{\text{crest}} = \frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} - H = 10.10\text{ m} - 2.80\text{ m} = 7.30\text{ m}.

03

A siphon operates at high altitude where atmospheric pressure is reduced to Patm=7.50×104 PaP_{\text{atm}} = 7.50\times 10^4\text{ Pa}. The fluid has density ρ=1050 kg/m3\rho = 1050\text{ kg/m}^3, vapor pressure Pvap=1.80×103 PaP_{\text{vap}} = 1.80\times 10^3\text{ Pa}, and discharges into the atmosphere at vertical distance H=1.50 mH = 1.50\text{ m} below the supply level. Accounting for flow velocity (v=2gHv = \sqrt{2gH}), find the maximum crest elevation above the supply level before cavitation occurs (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

hcrest,max⁡≈5.61 mh_{\text{crest},\max} \approx 5.61\text{ m}. First, the barometric elevation head is Patm−Pvapρg=75,000−1,8001050×9.80=73,20010,290≈7.114 m\frac{P_{\text{atm}} - P_{\text{vap}}}{\rho g} = \frac{75{,}000 - 1{,}800}{1050 \times 9.80} = \frac{73{,}200}{10{,}290} \approx 7.114\text{ m}. Subtracting the dynamic velocity head H=1.50 mH = 1.50\text{ m} gives hcrest,max⁡=7.114 m−1.50 m≈5.61 mh_{\text{crest},\max} = 7.114\text{ m} - 1.50\text{ m} \approx 5.61\text{ m}.

Loading workspace…