Resources

In a physics laboratory experiment to verify mechanical energy conservation, a cart of mass M=0.850 kgM = 0.850\text{ kg} on a horizontal low-friction air track is connected via a light, inextensible string passing over an ideal frictionless pulley of negligible mass to a hanging weight of mass m=0.150 kgm = 0.150\text{ kg}. The cart is released from rest with the hanging weight at height h=0.600 mh = 0.600\text{ m} above a laboratory impact sensor on the floor. Photogates positioned along the track measure the cart's velocity right before the hanging mass strikes the sensor. Assuming g=9.80 m/s2g = 9.80\text{ m/s}^2 and treating the cart and hanging weight as an isolated conservative system, calculate the theoretical speed vsystemv_{\text{system}} of the cart at the instant the hanging mass impacts the sensor, and compute the tension TT in the connecting string during the descent.

Answer and steps

Final answer

vsystem=1.33 m/sv_{\text{system}} = 1.33\text{ m/s} and T=1.25 NT = 1.25\text{ N}

Steps

01

Apply Conservation of Mechanical Energy

Consider the cart and the hanging weight as an isolated, conservative two-body system. Because the track is frictionless and the string is light and inextensible, non-conservative forces do no net work on the system. Both bodies move at the same speed vv at any given moment.

Take the reference level for gravitational potential energy (y=0y = 0) at the impact sensor.

  • Initial State (at rest):

    • Kinetic energy: Ki=0K_i = 0
    • Potential energy: Ui=mghU_i = mgh
    • Total mechanical energy: Ei=mghE_i = mgh
  • Final State (just before impact):

    • Potential energy: Uf=0U_f = 0
    • Kinetic energy of the system: Kf=12(M+m)vsystem2K_f = \frac{1}{2}(M + m)v_{\text{system}}^2
    • Total mechanical energy: Ef=12(M+m)vsystem2E_f = \frac{1}{2}(M + m)v_{\text{system}}^2

Equating initial and final mechanical energies: mgh=12(M+m)vsystem2mgh = \frac{1}{2}(M + m)v_{\text{system}}^2

Solve for vsystemv_{\text{system}}: vsystem=2mghM+mv_{\text{system}} = \sqrt{\frac{2mgh}{M + m}}

02

Calculate the Theoretical Speed

Substitute the given values into the expression:

  • M=0.850 kgM = 0.850\text{ kg}
  • m=0.150 kgm = 0.150\text{ kg}
  • M+m=1.000 kgM + m = 1.000\text{ kg}
  • h=0.600 mh = 0.600\text{ m}
  • g=9.80 m/s2g = 9.80\text{ m/s}^2

vsystem=2⋅(0.150 kg)⋅(9.80 m/s2)⋅(0.600 m)1.000 kg=1.764 m2/s2≈1.33 m/sv_{\text{system}} = \sqrt{\frac{2 \cdot (0.150\text{ kg}) \cdot (9.80\text{ m/s}^2) \cdot (0.600\text{ m})}{1.000\text{ kg}}} = \sqrt{1.764\text{ m}^2/\text{s}^2} \approx 1.33\text{ m/s}

03

Determine the String Tension TT

To find the tension TT in the string during descent, apply Newton's second law to the system to find the magnitude of the linear acceleration aa: a=FnetM+m=mgM+m=0.150 kg⋅9.80 m/s21.000 kg=1.47 m/s2a = \frac{F_{\text{net}}}{M + m} = \frac{mg}{M + m} = \frac{0.150\text{ kg} \cdot 9.80\text{ m/s}^2}{1.000\text{ kg}} = 1.47\text{ m/s}^2

Now, consider the free-body diagram of the cart of mass MM moving horizontally under the pull of tension TT alone: T=M⋅aT = M \cdot a

Substitute the numerical values: T=(0.850 kg)⋅(1.47 m/s2)≈1.25 NT = (0.850\text{ kg}) \cdot (1.47\text{ m/s}^2) \approx 1.25\text{ N}

(Alternative check using the hanging mass: mg−T=ma  ⟹  T=m(g−a)=0.150⋅(9.80−1.47)=1.25 Nmg - T = ma \implies T = m(g - a) = 0.150 \cdot (9.80 - 1.47) = 1.25\text{ N}.)

Common Pitfall: A frequent mistake is assuming the tension in the string equals the weight of the hanging mass (mg=0.150⋅9.80=1.47 Nmg = 0.150 \cdot 9.80 = 1.47\text{ N}). This is only true in static equilibrium. When the hanging mass accelerates downward, T<mgT < mg because a downward net force is required to produce acceleration (mg−T=mamg - T = ma).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student includes only the hanging mass when calculating the system's kinetic energy, ignoring the kinetic energy of the cart.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mgh=12mv2  ⟹  gh=12v2  ⟹  v=2ghmgh = \frac{1}{2}mv^2 \implies gh = \frac{1}{2}v^2 \implies v = \sqrt{2gh}

    Correct

    mgh=12(M+m)v2  ⟹  v=2mghM+mmgh = \frac{1}{2}(M + m)v^2 \implies v = \sqrt{\frac{2mgh}{M + m}}

    You included only the hanging mass mm in the kinetic energy term. Because the cart of mass MM is attached to the hanging mass by the string, both bodies move at the same speed vv, so the total final kinetic energy must be 12(M+m)v2\frac{1}{2}(M + m)v^2.

  2. Step 2

    v=2×9.80×0.600=11.76≈3.43 m/sv = \sqrt{2 \times 9.80 \times 0.600} = \sqrt{11.76} \approx 3.43\text{ m/s}

    Correct

    vsystem=2(0.150)(9.80)(0.600)0.850+0.150≈1.33 m/sv_{\text{system}} = \sqrt{\frac{2(0.150)(9.80)(0.600)}{0.850 + 0.150}} \approx 1.33\text{ m/s}

    You carried out the arithmetic correctly based on your derived formula, but the result is overstated because the total inertia of the system was not accounted for.

  3. Step 3

    a=v22h=(3.43)22×0.600=11.761.200=9.80 m/s2a = \frac{v^2}{2h} = \frac{(3.43)^2}{2 \times 0.600} = \frac{11.76}{1.200} = 9.80\text{ m/s}^2

    Correct

    a=v22h=(1.328)22×0.600=1.47 m/s2a = \frac{v^2}{2h} = \frac{(1.328)^2}{2 \times 0.600} = 1.47\text{ m/s}^2

    You correctly applied the kinematic relationship v2=2ahv^2 = 2ah, but using your overstated speed led to an acceleration equal to free-fall acceleration gg, which cannot happen when pulling an additional mass.

  4. Step 4

    T=Ma=0.850×9.80=8.33 NT = Ma = 0.850 \times 9.80 = 8.33\text{ N}

    Correct

    T=Ma=0.850×1.47≈1.25 NT = Ma = 0.850 \times 1.47 \approx 1.25\text{ N}

    You correctly recognized Newton's second law for the cart (T=MaT = Ma), but substituting the free-fall acceleration produced an impossible tension that exceeds the entire weight of the hanging mass (mg=1.47 Nmg = 1.47\text{ N}).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the decrease in gravitational potential energy converts into kinetic energy.

You used the kinematic relation v2=2ahv^2 = 2ah correctly to find acceleration from velocity and displacement.

You recognized that the string tension is the sole horizontal net force accelerating the cart (T=MaT = Ma).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
System Mass Omission in Kinetic Energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the falling mass as an isolated falling object rather than considering the combined two-body system, forgetting that the moving cart carries kinetic energy as well.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define the Entire System Boundary
  • When two or more bodies are linked by an inextensible string, every connected mass is in motion and possesses kinetic energy.

  • Always write Ktotal=∑12mivi2=12(M+m)v2K_{\text{total}} = \sum \frac{1}{2}m_i v_i^2 = \frac{1}{2}(M + m)v^2 before equating it to the lost potential energy.

Check Physical Plausibility of Tension
  • In an Atwood-style setup where a hanging mass accelerates downward, the tension must satisfy 0<T<mg0 < T < mg.

  • Verify that your calculated tension is strictly less than the weight of the hanging mass (mg=1.47 Nmg = 1.47\text{ N}) to ensure the downward acceleration is between 00 and gg.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the initial potential energy equal to the total final kinetic energy of both masses: mgh=12(M+m)vsystem2mgh = \frac{1}{2}(M + m)v_{\text{system}}^2.

  2. Substitute the system values: (0.150)(9.80)(0.600)=12(0.850+0.150)vsystem2  ⟹  0.882=0.500vsystem2(0.150)(9.80)(0.600) = \frac{1}{2}(0.850 + 0.150)v_{\text{system}}^2 \implies 0.882 = 0.500 v_{\text{system}}^2.

  3. Solve for the velocity: vsystem=0.8820.500=1.764≈1.33 m/sv_{\text{system}} = \sqrt{\frac{0.882}{0.500}} = \sqrt{1.764} \approx 1.33\text{ m/s}.

  4. Compute the acceleration: a=vsystem22h=1.7642×0.600=1.47 m/s2a = \frac{v_{\text{system}}^2}{2h} = \frac{1.764}{2 \times 0.600} = 1.47\text{ m/s}^2.

  5. Determine the string tension: T=Ma=(0.850 kg)(1.47 m/s2)≈1.25 NT = Ma = (0.850\text{ kg})(1.47\text{ m/s}^2) \approx 1.25\text{ N}.

Final answer

vsystem≈1.33 m/sv_{\text{system}} \approx 1.33\text{ m/s} and T≈1.25 NT \approx 1.25\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying all moving parts in connected systems before setting up energy equations.

  • Use free-body diagrams to verify that string tension is less than the hanging weight whenever a system accelerates downward.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the string tension equals the static weight of the hanging mass, neglecting the downward acceleration of the mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mgh = 12\frac{1}{2}(M+m)v^2   ⟹  \implies 0.150 ×\times 9.80 ×\times 0.600 = 12\frac{1}{2}(0.850 + 0.150)v^2   ⟹  \implies 0.882 = 0.500v^2   ⟹  \implies v^2 = 1.764   ⟹  \implies v = 1.33 m/s\text{ m/s}

  2. Step 2

    T = mg   ⟹  \implies T = 0.150 ×\times 9.80 = 1.47 N\text{ N}

    Correct

    mg - T = ma   ⟹  \implies T = M ⋅\cdot a = M (mgM+m)\left(\frac{mg}{M+m}\right) = (0.850 kg\text{ kg})(1.47 m/s\text{ m/s}^2) ≈\approx 1.25 N\text{ N}

    You set the tension equal to the static weight mgmg. Because the hanging mass is accelerating downward, the net force must be directed downward (mg−T=mamg - T = ma), which requires T<mgT < mg.

WHAT YOU DID WELL
Compliments from Your Teacher

You treated the cart and hanging mass as a combined conservative two-body system.

You correctly calculated the final speed using conservation of mechanical energy.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Static equilibrium assumed for dynamic system

You equated tension directly to the weight of the hanging mass, overlooking the fact that the mass is accelerating downward.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing static equilibrium with dynamic acceleration leads to the assumption that T=mgT = mg. For an accelerating mass, Newton's second law dictates that ΣF=ma\Sigma F = ma, so the tension must be strictly less than the gravitational force when accelerating downward.

REASONING PATH
Your ACEpath teacher’s suggested approach
Equilibrium vs. Acceleration Check
  • For a hanging mass accelerating downward, mg−T=ma  ⟹  T=m(g−a)<mgmg - T = ma \implies T = m(g - a) < mg.

  • Always draw a free-body diagram and check whether the object is accelerating before writing down the tension.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the linear acceleration of the connected system using Newton's second law: a=mgM+m=0.150×9.800.850+0.150=1.47 m/s2a = \frac{mg}{M + m} = \frac{0.150 \times 9.80}{0.850 + 0.150} = 1.47\text{ m/s}^2.

  2. Apply Newton's second law to the horizontal cart: T=M⋅a=0.850 kg×1.47 m/s2=1.25 NT = M \cdot a = 0.850\text{ kg} \times 1.47\text{ m/s}^2 = 1.25\text{ N} (or for the hanging mass: T=m(g−a)=0.150(9.80−1.47)=1.25 NT = m(g - a) = 0.150(9.80 - 1.47) = 1.25\text{ N}).

Final answer

vsystem=1.33 m/sv_{\text{system}} = 1.33\text{ m/s} and T=1.25 NT = 1.25\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw individual free-body diagrams for each accelerating body rather than treating tension as a static reaction force.

  • Practice using a=Fnet, externalmtotala = \frac{F_{\text{net, external}}}{m_{\text{total}}} to find acceleration before solving for internal constraint forces like tension.

OverviewACEpath Teacher's Diagnosis

03 The student equates the potential energy lost by the hanging mass only to the kinetic energy gained by the cart on the track, neglecting the kinetic energy of the hanging mass.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mgh=(12)Mv2  ⟹  0.150×9.80×0.600=(12)(0.850)v2  ⟹  0.882=0.425v2  ⟹  v2=2.075  ⟹  v=1.44 m/smgh = \left(\frac{1}{2}\right)Mv^2 \implies 0.150 \times 9.80 \times 0.600 = \left(\frac{1}{2}\right)(0.850)v^2 \implies 0.882 = 0.425v^2 \implies v^2 = 2.075 \implies v = 1.44\text{ m/s}

    Correct

    mgh=12(M+m)v2  ⟹  0.882=12(0.850+0.150)v2  ⟹  v=1.33 m/smgh = \frac{1}{2}(M + m)v^2 \implies 0.882 = \frac{1}{2}(0.850 + 0.150)v^2 \implies v = 1.33\text{ m/s}

    Both the cart of mass MM and the hanging weight of mass mm move together at the same speed vv. Therefore, the total final kinetic energy of the system must include both masses: Kf=12(M+m)v2K_f = \frac{1}{2}(M + m)v^2.

  2. Step 2

    a=v22h=2.0752×0.600=1.73 m/s2  ⟹  T=Ma=0.850×1.73=1.47 Na = \frac{v^2}{2h} = \frac{2.075}{2 \times 0.600} = 1.73\text{ m/s}^2 \implies T = Ma = 0.850 \times 1.73 = 1.47\text{ N}

    Correct

    a=v22h=(1.328)22(0.600)=1.47 m/s2  ⟹  T=Ma=0.850×1.47=1.25 Na = \frac{v^2}{2h} = \frac{(1.328)^2}{2(0.600)} = 1.47\text{ m/s}^2 \implies T = Ma = 0.850 \times 1.47 = 1.25\text{ N}

    Your kinematic formula a=v22ha = \frac{v^2}{2h} and dynamic relation T=MaT = Ma were correctly formulated, but the numerical result was affected by the incorrect value of vv from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the gravitational potential energy lost by the hanging weight as mghmgh.

You correctly related constant acceleration to displacement and final speed using kinematics.

You applied Newton's second law correctly to isolate the horizontal cart with T=MaT = Ma.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Connected Body Kinetic Energy

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the hanging mass solely as an external agent providing potential energy rather than as a moving component of the two-body system that possesses kinetic energy 12mv2\frac{1}{2}mv^2 as it descends.

REASONING PATH
Your ACEpath teacher’s suggested approach
System Kinetic Energy Rule
  • Every object that is in motion within a connected system contributes 12mivi2\frac{1}{2}m_i v_i^2 to the system's total kinetic energy.

  • When writing KfinalK_{\text{final}}, list every body in motion and sum their individual kinetic energies before solving for velocity.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include both masses in the total kinetic energy: mgh=12(M+m)vsystem2mgh = \frac{1}{2}(M + m)v_{\text{system}}^2.

  2. Substitute the system values: 0.150⋅9.80⋅0.600=12(0.850+0.150)vsystem2  ⟹  0.882=0.500vsystem20.150 \cdot 9.80 \cdot 0.600 = \frac{1}{2}(0.850 + 0.150)v_{\text{system}}^2 \implies 0.882 = 0.500 v_{\text{system}}^2.

  3. Solve for speed: vsystem=0.8820.500=1.764≈1.33 m/sv_{\text{system}} = \sqrt{\frac{0.882}{0.500}} = \sqrt{1.764} \approx 1.33\text{ m/s}.

  4. Determine system acceleration: a=vsystem22h=1.7642(0.600)=1.47 m/s2a = \frac{v_{\text{system}}^2}{2h} = \frac{1.764}{2(0.600)} = 1.47\text{ m/s}^2.

  5. Calculate the string tension: T=Ma=0.850×1.47=1.25 NT = Ma = 0.850 \times 1.47 = 1.25\text{ N}.

Final answer

vsystem=1.33 m/sv_{\text{system}} = 1.33\text{ m/s} and T=1.25 NT = 1.25\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the sum of kinetic energies for all connected moving parts (K=∑12mivi2K = \sum \frac{1}{2}m_i v_i^2) before plugging in values.

  • Check that string tension in an accelerating Atwood or modified-Atwood setup is strictly less than the static weight of the hanging mass (T<mgT < mg).

Lock it in

Similar question

01

A cart of mass M=1.60 kgM = 1.60\text{ kg} on a horizontal frictionless track is connected by a light string over a frictionless pulley to a hanging mass m=0.40 kgm = 0.40\text{ kg}. If the system is released from rest, find the speed of the cart after the hanging mass has descended a vertical distance of h=0.50 mh = 0.50\text{ m}. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

v=1.40 m/sv = 1.40\text{ m/s}. Apply energy conservation to the two-body system: mgh=12(M+m)v2  ⟹  (0.40)(9.80)(0.50)=12(2.00)v2  ⟹  1.96=1.00v2  ⟹  v=1.96=1.40 m/smgh = \frac{1}{2}(M + m)v^2 \implies (0.40)(9.80)(0.50) = \frac{1}{2}(2.00)v^2 \implies 1.96 = 1.00v^2 \implies v = \sqrt{1.96} = 1.40\text{ m/s}.

02

A 2.0 kg2.0\text{ kg} block on a frictionless table is connected via a light cord over a pulley to a 3.0 kg3.0\text{ kg} hanging block. The system is released from rest. Calculate both the acceleration aa of the blocks and the tension TT in the cord during the motion. (Use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

a=5.88 m/s2a = 5.88\text{ m/s}^2 and T=11.8 NT = 11.8\text{ N}. The net accelerating force is the hanging weight: Fnet=mhangg=(3.0)(9.80)=29.4 NF_{\text{net}} = m_{\text{hang}}g = (3.0)(9.80) = 29.4\text{ N}. The total mass is M+m=5.0 kgM + m = 5.0\text{ kg}, so a=29.45.0=5.88 m/s2a = \frac{29.4}{5.0} = 5.88\text{ m/s}^2. For the horizontal block, T=Ma=(2.0)(5.88)=11.76 N≈11.8 NT = Ma = (2.0)(5.88) = 11.76\text{ N} \approx 11.8\text{ N} (or m(g−a)=3.0(9.80−5.88)=11.76 Nm(g - a) = 3.0(9.80 - 5.88) = 11.76\text{ N}).

03

A cart of mass M=0.75 kgM = 0.75\text{ kg} rests on a track inclined at 30∘30^\circ above the horizontal. It is connected over a smooth pulley at the top of the incline to a hanging mass m=0.25 kgm = 0.25\text{ kg}. If the incline is frictionless and the system is released from rest, will the hanging mass move upward or downward? What is the magnitude of the system's acceleration? (Use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

The hanging mass moves upward; a=1.23 m/s2a = 1.23\text{ m/s}^2. The component of gravity pulling the cart down the incline is Fincline=Mgsin⁡(30∘)=(0.75)(9.80)(0.50)=3.675 NF_{\text{incline}} = Mg\sin(30^\circ) = (0.75)(9.80)(0.50) = 3.675\text{ N}, while the downward force on the hanging mass is mg=(0.25)(9.80)=2.45 Nmg = (0.25)(9.80) = 2.45\text{ N}. Since Fincline>mgF_{\text{incline}} > mg, the cart slides down the incline and the hanging mass moves upward. Net force: Fnet=3.675−2.45=1.225 NF_{\text{net}} = 3.675 - 2.45 = 1.225\text{ N}. Acceleration: a=FnetM+m=1.2251.00=1.225 m/s2≈1.23 m/s2a = \frac{F_{\text{net}}}{M + m} = \frac{1.225}{1.00} = 1.225\text{ m/s}^2 \approx 1.23\text{ m/s}^2.

Loading workspace…