Resources

A steel piano wire of length L=0.750 mL = 0.750\text{ m} and linear mass density μ=5.20×10−3 kg/m\mu = 5.20\times 10^{-3}\text{ kg/m} is held under tension FT=620 NF_T = 620\text{ N}. When plucked, the wire vibrates in its fundamental standing wave mode, coupling mechanical vibrations to the adjacent air at 20.0∘C20.0^\circ\text{C} (vair=343 m/sv_{\text{air}} = 343\text{ m/s}). (a) Calculate the propagation speed vwirev_{\text{wire}} of transverse waves along the wire. (b) Determine the fundamental vibration frequency ff generated by the wire. (c) Calculate the wavelength λsound\lambda_{\text{sound}} of the longitudinal sound wave launched into the room air.

Answer and steps

Final answer

(a) vwire=345 m/sv_{\text{wire}} = 345\text{ m/s}; (b) f=230 Hzf = 230\text{ Hz}; (c) λsound=1.49 m\lambda_{\text{sound}} = 1.49\text{ m}.

Steps

Part (a): Wave Speed along the Wire

The speed vwirev_{\text{wire}} of a transverse mechanical wave traveling on a stretched string depends on the tension FTF_T and the linear mass density μ\mu:

vwire=FTμv_{\text{wire}} = \sqrt{\frac{F_T}{\mu}}

Substitute the given values into the formula:

vwire=620 N5.20×10−3 kg/m=1.1923×105 m2/s2≈345 m/sv_{\text{wire}} = \sqrt{\frac{620\text{ N}}{5.20 \times 10^{-3}\text{ kg/m}}} = \sqrt{1.1923 \times 10^5\text{ m}^2/\text{s}^2} \approx 345\text{ m/s}


Part (b): Fundamental Frequency of the Wire

For a wire fixed at both ends vibrating in its fundamental mode (n=1n = 1), the wire forms a single standing-wave loop between two boundary nodes. Therefore, the length of the wire corresponds to half of the standing wave's wavelength:

L=λwire2  ⟹  λwire=2LL = \frac{\lambda_{\text{wire}}}{2} \implies \lambda_{\text{wire}} = 2L

Using the relationship v=fλv = f\lambda, the fundamental frequency ff is:

f=vwire2Lf = \frac{v_{\text{wire}}}{2L}

Substitute vwire≈345.3 m/sv_{\text{wire}} \approx 345.3\text{ m/s} and L=0.750 mL = 0.750\text{ m}:

f=345.3 m/s2(0.750 m)=345.3 m/s1.50 m≈230 Hzf = \frac{345.3\text{ m/s}}{2(0.750\text{ m})} = \frac{345.3\text{ m/s}}{1.50\text{ m}} \approx 230\text{ Hz}


Part (c): Wavelength of the Sound Wave in Air

When the wire vibrates, it pushes against the adjacent air molecules at that exact same frequency.

Important Conceptual Note: Frequency is determined solely by the source and remains invariant as the oscillation transfers from the wire into the surrounding air (fsound=fwire=ff_{\text{sound}} = f_{\text{wire}} = f). However, because the propagation speed changes from vwirev_{\text{wire}} to vairv_{\text{air}}, the wavelength in air is different from the wavelength on the wire.

Using the wave speed equation for sound in air:

vair=fλsound  ⟹  λsound=vairfv_{\text{air}} = f \lambda_{\text{sound}} \implies \lambda_{\text{sound}} = \frac{v_{\text{air}}}{f}

Substitute vair=343 m/sv_{\text{air}} = 343\text{ m/s} and f≈230.2 Hzf \approx 230.2\text{ Hz}:

λsound=343 m/s230.2 Hz≈1.49 m\lambda_{\text{sound}} = \frac{343\text{ m/s}}{230.2\text{ Hz}} \approx 1.49\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the fundamental standing wave condition on a fixed-fixed string as λ = L instead of λ = 2L, doubling the calculated frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vwire=FTμ  ⟹  vwire=6200.00520=345 m/sv_{\text{wire}} = \sqrt{\frac{F_T}{\mu}} \implies v_{\text{wire}} = \sqrt{\frac{620}{0.00520}} = 345\text{ m/s}

  2. Step 2

    λ=0.750 m  ⟹  f=3450.750=460 Hz\lambda = 0.750\text{ m} \implies f = \frac{345}{0.750} = 460\text{ Hz}

    Correct

    λwire=2L=2(0.750 m)=1.50 m  ⟹  f=vwireλwire=345.3 m/s1.50 m≈230 Hz\lambda_{\text{wire}} = 2L = 2(0.750\text{ m}) = 1.50\text{ m} \implies f = \frac{v_{\text{wire}}}{\lambda_{\text{wire}}} = \frac{345.3\text{ m/s}}{1.50\text{ m}} \approx 230\text{ Hz}

    In the fundamental mode (n=1n = 1) for a string fixed at both ends, the wire length contains only half of a standing wave loop (L=λ2L = \frac{\lambda}{2}). Therefore, the fundamental wavelength is λ=2L=1.50 m\lambda = 2L = 1.50\text{ m}, yielding f=230 Hzf = 230\text{ Hz}.

  3. Step 3

    λsound=vairf  ⟹  λsound=343460=0.746 m\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f} \implies \lambda_{\text{sound}} = \frac{343}{460} = 0.746\text{ m}

    Correct

    λsound=vairf=343 m/s230.2 Hz≈1.49 m\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f} = \frac{343\text{ m/s}}{230.2\text{ Hz}} \approx 1.49\text{ m}

    Your reasoning that the sound frequency equals the wire vibration frequency is completely correct, but your numerical answer was affected by the incorrect frequency from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the tension and linear density to find the wave speed on the wire.

You recognized that the frequency of the sound wave launched into the air equals the vibration frequency of the wire.

You correctly applied λ=vf\lambda = \frac{v}{f} to find the wavelength of the sound wave in air.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Fixed-Fixed Boundary Condition Wavelength Error

You set λ=L\lambda = L instead of λ=2L\lambda = 2L for the fundamental mode of a fixed-ended string.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a single standing-wave loop (which spans half a wavelength, λ2\frac{\lambda}{2}) with an entire wavelength (λ\lambda). For boundaries fixed at both ends, nodes must occur at x=0x = 0 and x=Lx = L, meaning the fundamental mode has L=λ12L = \frac{\lambda_1}{2}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Fundamental Mode Geometry
  • For a string fixed at both ends, nodes occur at both boundaries. The fundamental standing wave (n=1n=1) has exactly one antinode in the middle, so L=λ12  ⟺  λ1=2LL = \frac{\lambda_1}{2} \iff \lambda_1 = 2L.

  • Always sketch the fundamental waveform with nodes at each fixed end and count how many half-wavelengths fit into length LL before solving for frequency.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the fundamental wavelength on the wire: λwire=2L=2(0.750 m)=1.50 m\lambda_{\text{wire}} = 2L = 2(0.750\text{ m}) = 1.50\text{ m}.

  2. Calculate the fundamental frequency: f=vwireλwire=345.3 m/s1.50 m≈230 Hzf = \frac{v_{\text{wire}}}{\lambda_{\text{wire}}} = \frac{345.3\text{ m/s}}{1.50\text{ m}} \approx 230\text{ Hz}.

  3. Calculate the wavelength of sound in air: λsound=vairf=343 m/s230.2 Hz≈1.49 m\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f} = \frac{343\text{ m/s}}{230.2\text{ Hz}} \approx 1.49\text{ m}.

Final answer

(a) vwire=345 m/sv_{\text{wire}} = 345\text{ m/s}; (b) f=230 Hzf = 230\text{ Hz}; (c) λsound=1.49 m\lambda_{\text{sound}} = 1.49\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standing wave diagrams for strings fixed at both ends and pipes with open or closed ends.

  • Practice identifying the harmonic number nn and relating string length LL to wavelength via L=nλ2L = n\frac{\lambda}{2}.

OverviewACEpath Teacher's Diagnosis

02 The student assumes that the wavelength of the sound wave in air is identical to the standing wavelength on the wire rather than being determined by the sound speed in air.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vwire=FTμ  ⟹  vwire=6200.00520=345 m/sv_{\text{wire}} = \sqrt{\frac{F_T}{\mu}} \implies v_{\text{wire}} = \sqrt{\frac{620}{0.00520}} = 345\text{ m/s}

  2. Step 2

    λwire=2L=2(0.750)=1.50 m  ⟹  f=3451.50=230 Hz\lambda_{\text{wire}} = 2L = 2(0.750) = 1.50\text{ m} \implies f = \frac{345}{1.50} = 230\text{ Hz}

  3. Step 3

    λsound=λwire=1.50 m\lambda_{\text{sound}} = \lambda_{\text{wire}} = 1.50\text{ m}

    Correct

    λsound=vairf=343 m/s230 Hz≈1.49 m\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f} = \frac{343\text{ m/s}}{230\text{ Hz}} \approx 1.49\text{ m}

    When mechanical vibrations couple from the wire into air, the frequency ff stays invariant, but the wave speed changes to vair=343 m/sv_{\text{air}} = 343\text{ m/s}. Wavelength in air must be calculated from λsound=vairf\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f}, not assumed to equal the standing wavelength on the wire.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the transverse wave speed on the wire using tension and linear mass density.

You correctly identified the fundamental standing wavelength on the wire as λwire=2L\lambda_{\text{wire}} = 2L.

You correctly computed the fundamental oscillation frequency of the wire.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wavelength medium-transfer confusion

Setting λsound=λwire\lambda_{\text{sound}} = \lambda_{\text{wire}} instead of computing λsound=vairf\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the wavelength of a wave in its source medium with its wavelength after coupling into an adjacent medium. Across any medium boundary, frequency is determined by the source and stays constant, while wave speed and wavelength adapt to the new medium according to v=fλv = f\lambda.

REASONING PATH
Your ACEpath teacher’s suggested approach
Wave Boundary Principle
  • When a vibration transfers between media, frequency ff remains constant (fsource=ftransmittedf_{\text{source}} = f_{\text{transmitted}}).

  • Always carry the frequency ff into the new medium, then compute λ=vf\lambda = \frac{v}{f} using the speed of the wave in that specific medium.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the relationship between wave speed, frequency, and wavelength in air: vair=fλsoundv_{\text{air}} = f \lambda_{\text{sound}}.

  2. Substitute vair=343 m/sv_{\text{air}} = 343\text{ m/s} and f=230.2 Hzf = 230.2\text{ Hz}: λsound=343 m/s230.2 Hz≈1.49 m\lambda_{\text{sound}} = \frac{343\text{ m/s}}{230.2\text{ Hz}} \approx 1.49\text{ m}.

Final answer

λsound=1.49 m\lambda_{\text{sound}} = 1.49\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that frequency is a source property that never changes when sound is generated into air.

  • Practice identifying whether each given quantity (vv, ff, or λ\lambda) belongs to the vibrating source or to the propagating sound field.

OverviewACEpath Teacher's Diagnosis

03 The student omits the square root in the formula for wave speed on a stretched string, calculating v = F_T / μ.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vwire=FTμ=6205.20×10−3=119231 m/sv_{\text{wire}} = \frac{F_T}{\mu} = \frac{620}{5.20 \times 10^{-3}} = 119231\text{ m/s}

    Correct

    vwire=FTμ=620 N5.20×10−3 kg/m≈345 m/sv_{\text{wire}} = \sqrt{\frac{F_T}{\mu}} = \sqrt{\frac{620\text{ N}}{5.20 \times 10^{-3}\text{ kg/m}}} \approx 345\text{ m/s}

    The speed of a transverse wave on a string under tension depends on the square root of tension divided by linear mass density: v=FT/μv = \sqrt{F_T / \mu}. Omitting the square root led to an unrealistically high wave speed.

  2. Step 2

    λwire=2L=2(0.750)=1.50 m  ⟹  f=1192311.50=79487 Hz\lambda_{\text{wire}} = 2L = 2(0.750) = 1.50\text{ m} \implies f = \frac{119231}{1.50} = 79487\text{ Hz}

    Correct

    f=vwire2L=345.3 m/s1.50 m≈230 Hzf = \frac{v_{\text{wire}}}{2L} = \frac{345.3\text{ m/s}}{1.50\text{ m}} \approx 230\text{ Hz}

    Your formula λwire=2L\lambda_{\text{wire}} = 2L and your relationship f=vλf = \frac{v}{\lambda} are conceptually correct, but your calculated frequency is incorrect due to substituting the wrong wave speed from Part (a).

  3. Step 3

    λsound=vairf=34379487=0.00432 m\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f} = \frac{343}{79487} = 0.00432\text{ m}

    Correct

    λsound=vairf=343 m/s230.2 Hz≈1.49 m\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f} = \frac{343\text{ m/s}}{230.2\text{ Hz}} \approx 1.49\text{ m}

    You correctly recognized that the sound wave in air shares the same frequency as the vibrating wire and that λ=vf\lambda = \frac{v}{f}. Your resulting wavelength is off solely because of the carried-over frequency error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the fundamental mode condition λ=2L\lambda = 2L for a string fixed at both ends.

You correctly identified that wave frequency remains invariant when mechanical vibrations couple into sound waves in air.

You applied the wave relationship λ=vf\lambda = \frac{v}{f} accurately in both media.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Square Root in Wave Speed Formula

You wrote v=FTμv = \frac{F_T}{\mu} instead of taking the square root, v=FTμv = \sqrt{\frac{F_T}{\mu}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the ratio of restoring force to inertia (FT/μF_T / \mu) with the actual wave propagation speed, forgetting that dimensional analysis requires a square root to yield units of m/s\text{m/s}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency Check
  • [FT/μ]=Nkg/m=kg⋅m/s2kg/m=m2/s2[F_T / \mu] = \frac{\text{N}}{\text{kg/m}} = \frac{\text{kg}\cdot\text{m/s}^2}{\text{kg/m}} = \text{m}^2/\text{s}^2. Taking the square root gives m/s\text{m/s}.

  • Always verify units when recalling wave formulas: velocity must have units of meters per second, which requires FT/μ\sqrt{F_T / \mu}.

Physical Reasonableness Check
  • Mechanical transverse wave speeds along metal strings typically range between 100 m/s100\text{ m/s} and 1000 m/s1000\text{ m/s}. An audible piano tone has a frequency well below 5000 Hz5000\text{ Hz}.

  • Check your calculated value against typical physical magnitudes: ≈1.2×105 m/s\approx 1.2 \times 10^5\text{ m/s} and 80 kHz80\text{ kHz} are in the extreme ultrasonic realm, signaling a missing radical.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the correct wave speed on the wire: vwire=6205.20×10−3=119231≈345.3 m/sv_{\text{wire}} = \sqrt{\frac{620}{5.20 \times 10^{-3}}} = \sqrt{119231} \approx 345.3\text{ m/s}.

  2. Determine the fundamental frequency using λwire=1.50 m\lambda_{\text{wire}} = 1.50\text{ m}: f=345.3 m/s1.50 m≈230.2 Hzf = \frac{345.3\text{ m/s}}{1.50\text{ m}} \approx 230.2\text{ Hz}.

  3. Find the sound wavelength in air using vair=343 m/sv_{\text{air}} = 343\text{ m/s}: λsound=343 m/s230.2 Hz≈1.49 m\lambda_{\text{sound}} = \frac{343\text{ m/s}}{230.2\text{ Hz}} \approx 1.49\text{ m}.

Final answer

(a) vwire≈345 m/sv_{\text{wire}} \approx 345\text{ m/s}; (b) f≈230 Hzf \approx 230\text{ Hz}; (c) λsound≈1.49 m\lambda_{\text{sound}} \approx 1.49\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize v=FT/μv = \sqrt{F_T / \mu} by checking that N/(kg/m)=m2/s2\text{N}/(\text{kg/m}) = \text{m}^2/\text{s}^2, requiring a square root to yield velocity.

  • Perform sanity checks on frequencies of musical instruments to ensure they fall within the human audible range (20 Hz−20000 Hz20\text{ Hz} - 20000\text{ Hz}).

  • Practice distinguishing between wave properties that remain constant across a boundary (frequency) versus those that change with the medium (speed and wavelength).

Lock it in

Similar question

01

A violin string of length L=0.330 mL = 0.330\text{ m} is held fixed at both ends. Transverse waves travel along the string at v=290 m/sv = 290\text{ m/s}. Calculate the fundamental frequency f1f_1 of the string.

Answer

For n=1n=1, λ1=2L=2(0.330 m)=0.660 m\lambda_1 = 2L = 2(0.330\text{ m}) = 0.660\text{ m}. Then f1=vλ1=290 m/s0.660 m≈439 Hzf_1 = \frac{v}{\lambda_1} = \frac{290\text{ m/s}}{0.660\text{ m}} \approx 439\text{ Hz}.

02

A cello string of length L=0.700 mL = 0.700\text{ m} and linear mass density μ=1.80×10−3 kg/m\mu = 1.80 \times 10^{-3}\text{ kg/m} produces a fundamental frequency of 220 Hz220\text{ Hz}. (a) What is the wavelength of the standing wave on the string? (b) What tension FTF_T must be applied to the string?

Answer

(a) λ=2L=1.40 m\lambda = 2L = 1.40\text{ m}. (b) Wave speed v=fλ=(220 s−1)(1.40 m)=308 m/sv = f\lambda = (220\text{ s}^{-1})(1.40\text{ m}) = 308\text{ m/s}. Tension FT=μv2=(1.80×10−3 kg/m)(308 m/s)2≈171 NF_T = \mu v^2 = (1.80 \times 10^{-3}\text{ kg/m})(308\text{ m/s})^2 \approx 171\text{ N}.

03

A harp string of length 0.800 m0.800\text{ m} vibrates in its second harmonic (n=2n = 2) with wave speed 400 m/s400\text{ m/s}, radiating sound into room air where vair=340 m/sv_{\text{air}} = 340\text{ m/s}. Find (a) the frequency ff of the sound and (b) the wavelength λsound\lambda_{\text{sound}} of the sound wave in air.

Answer

(a) For n=2n=2, L=λwire=0.800 mL = \lambda_{\text{wire}} = 0.800\text{ m}. Thus f=vwireλwire=400 m/s0.800 m=500 Hzf = \frac{v_{\text{wire}}}{\lambda_{\text{wire}}} = \frac{400\text{ m/s}}{0.800\text{ m}} = 500\text{ Hz}. (b) Sound frequency is invariant (f=500 Hzf = 500\text{ Hz}), so λsound=vairf=340 m/s500 Hz=0.680 m\lambda_{\text{sound}} = \frac{v_{\text{air}}}{f} = \frac{340\text{ m/s}}{500\text{ Hz}} = 0.680\text{ m}.

Loading workspace…