Resources

A steel sphere is rolled off the edge of a horizontal laboratory platform at a height of h=44.1 mh = 44.1\text{ m} above a level floor with an initial horizontal speed of v0=15.0 m/sv_0 = 15.0\text{ m/s}. Neglecting air resistance and taking the acceleration due to gravity as g=9.80 m/s2g = 9.80\text{ m/s}^2, determine: (a) the time of flight tt before the sphere strikes the floor, (b) the horizontal range RR from the base of the platform to the point of impact, and (c) the final speed vfv_f of the sphere immediately prior to impact.

Answer and steps

Final answer

(a) t=3.00 st = 3.00\text{ s}; (b) R=45.0 mR = 45.0\text{ m}; (c) vf=33.0 m/sv_f = 33.0\text{ m/s}

Steps

01

Find the time of flight tt

In horizontal projectile motion, the two-dimensional motion can be separated into two completely independent one-dimensional motions: uniform horizontal motion at constant velocity and vertical motion under uniform gravitational acceleration.

The sphere rolls off horizontally, meaning its initial vertical velocity is zero (v0y=0 m/sv_{0y} = 0\text{ m/s}). Taking the downward direction as positive: h=v0yt+12gt2=12gt2h = v_{0y}t + \frac{1}{2}gt^2 = \frac{1}{2}gt^2

Solving for tt: t=2hg=2⋅44.1 m9.80 m/s2=9.00 s2=3.00 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2 \cdot 44.1\text{ m}}{9.80\text{ m/s}^2}} = \sqrt{9.00\text{ s}^2} = 3.00\text{ s}

Common Pitfall: The initial horizontal velocity does not affect the time of flight. An object launched horizontally from height hh takes the exact same amount of time to reach the ground as an object dropped from rest from the same height.


02

Find the horizontal range RR

Because air resistance is neglected, no horizontal forces act on the sphere (ax=0 m/s2a_x = 0\text{ m/s}^2). The horizontal speed remains constant at vx=v0=15.0 m/sv_x = v_0 = 15.0\text{ m/s}: R=v0⋅t=(15.0 m/s)⋅(3.00 s)=45.0 mR = v_0 \cdot t = (15.0\text{ m/s}) \cdot (3.00\text{ s}) = 45.0\text{ m}


03

Find the final speed vfv_f immediately prior to impact

Immediately before striking the floor, the sphere has both horizontal and vertical velocity components:

  • Horizontal component: vfx=v0=15.0 m/sv_{fx} = v_0 = 15.0\text{ m/s}
  • Vertical component: vfy=v0y+gt=0+(9.80 m/s2)(3.00 s)=29.4 m/sv_{fy} = v_{0y} + gt = 0 + (9.80\text{ m/s}^2)(3.00\text{ s}) = 29.4\text{ m/s}

The resultant speed vfv_f is the magnitude of the velocity vector: vf=vfx2+vfy2=(15.0 m/s)2+(29.4 m/s)2v_f = \sqrt{v_{fx}^2 + v_{fy}^2} = \sqrt{(15.0\text{ m/s})^2 + (29.4\text{ m/s})^2} vf=225+864.36 m/s=1089.36 m/s≈33.0 m/sv_f = \sqrt{225 + 864.36}\text{ m/s} = \sqrt{1089.36}\text{ m/s} \approx 33.0\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 1/2 in the kinematic equation for free fall from rest, calculating t = √(h/g) instead of √(2h/g), which propagates into an underestimated range and final speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    h=gt2  ⟹  t=hg=44.19.80=4.5≈2.12 sh = gt^2 \implies t = \sqrt{\frac{h}{g}} = \sqrt{\frac{44.1}{9.80}} = \sqrt{4.5} \approx 2.12\text{ s}

    Correct

    h=12gt2  ⟹  t=2hg=2(44.1 m)9.80 m/s2=3.00 sh = \frac{1}{2}gt^2 \implies t = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(44.1\text{ m})}{9.80\text{ m/s}^2}} = 3.00\text{ s}

    Because the sphere starts from rest vertically (v0y=0v_{0y} = 0), vertical displacement under constant gravitational acceleration is governed by h=12gt2h = \frac{1}{2}gt^2, not h=gt2h = gt^2. Omitting the 12\frac{1}{2} factor yielded t≈2.12 st \approx 2.12\text{ s} instead of 3.00 s3.00\text{ s}.

  2. Step 2

    R=v0t=15.0×2.12=31.8 mR = v_0 t = 15.0 \times 2.12 = 31.8\text{ m}

    Correct

    R=v0t=(15.0 m/s)(3.00 s)=45.0 mR = v_0 t = (15.0\text{ m/s})(3.00\text{ s}) = 45.0\text{ m}

    Your formula R=v0tR = v_0 t for uniform horizontal motion is completely correct, but substituting your earlier time value of t=2.12 st = 2.12\text{ s} led to an incorrect numerical range.

  3. Step 3

    vy=gt=9.80×2.12=20.8 m/s  ⟹  vf=v02+vy2=15.02+20.82≈25.6 m/sv_y = gt = 9.80 \times 2.12 = 20.8\text{ m/s} \implies v_f = \sqrt{v_0^2 + v_y^2} = \sqrt{15.0^2 + 20.8^2} \approx 25.6\text{ m/s}

    Correct

    vy=gt=(9.80 m/s2)(3.00 s)=29.4 m/s  ⟹  vf=15.02+29.42≈33.0 m/sv_y = gt = (9.80\text{ m/s}^2)(3.00\text{ s}) = 29.4\text{ m/s} \implies v_f = \sqrt{15.0^2 + 29.4^2} \approx 33.0\text{ m/s}

    Your vector combination method vf=v0x2+vy2v_f = \sqrt{v_{0x}^2 + v_y^2} and equation vy=gtv_y = gt are entirely correct, but the result is numerically off due to the propagated value of tt.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly treated the horizontal and vertical motions as independent components.

You correctly applied uniform horizontal motion (R=v0tR = v_0 t) to determine the range.

You properly used the Pythagorean theorem to combine perpendicular velocity components into the total final speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted factor of 1/2 in free-fall kinematics

You wrote h=gt2h = gt^2 instead of h=12gt2h = \frac{1}{2}gt^2, leaving out the coefficient 12\frac{1}{2}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the displacement formula for constant acceleration from rest (y=12at2y = \frac{1}{2}at^2) with the velocity formula (v=atv = at) or overlooked the average velocity factor of 12\frac{1}{2} when integrating uniform acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Displacement vs. Velocity in Kinematics
  • For motion with constant acceleration aa starting from rest (v0=0v_0 = 0), velocity is v=atv = at, but displacement is Δy=12at2\Delta y = \frac{1}{2}at^2.

  • Always verify that displacement formulas include the 12\frac{1}{2} coming from average velocity vˉ=0+at2\bar{v} = \frac{0 + at}{2}.

Time of Flight from Rest
  • For an object released or launched horizontally from height hh, t=2hgt = \sqrt{\frac{2h}{g}}.

  • Check that the factor of 22 appears under the radical when solving for fall time from height hh.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the full vertical displacement equation with v0y=0v_{0y} = 0: h=12gt2  ⟹  t=2hg=2(44.1)9.80=3.00 sh = \frac{1}{2}gt^2 \implies t = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(44.1)}{9.80}} = 3.00\text{ s}.

  2. Recalculate horizontal range with the correct time of flight: R=v0t=(15.0 m/s)(3.00 s)=45.0 mR = v_0 t = (15.0\text{ m/s})(3.00\text{ s}) = 45.0\text{ m}.

  3. Recalculate final vertical velocity: vfy=gt=(9.80 m/s2)(3.00 s)=29.4 m/sv_{fy} = gt = (9.80\text{ m/s}^2)(3.00\text{ s}) = 29.4\text{ m/s}.

  4. Compute total impact speed: vf=vx2+vfy2=15.02+29.42=1089.36≈33.0 m/sv_f = \sqrt{v_x^2 + v_{fy}^2} = \sqrt{15.0^2 + 29.4^2} = \sqrt{1089.36} \approx 33.0\text{ m/s}.

Final answer

(a) t=3.00 st = 3.00\text{ s}; (b) R=45.0 mR = 45.0\text{ m}; (c) vf=33.0 m/sv_f = 33.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the standard free-fall relation from rest as h=12gt2h = \frac{1}{2}gt^2 so you instinctively write t=2h/gt = \sqrt{2h/g}.

  • Do a quick dimensional or physical check: with g≈10 m/s2g \approx 10\text{ m/s}^2, falling for 1 s1\text{ s} covers 5 m5\text{ m}, 2 s2\text{ s} covers 20 m20\text{ m}, and 3 s3\text{ s} covers 45 m45\text{ m}.

OverviewACEpath Teacher's Diagnosis

02 The student equates the final impact speed solely to the vertical velocity component, completely omitting the initial horizontal velocity from the final speed calculation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    h=(12)gt2  ⟹  t=2hg  ⟹  t=2×44.19.80  ⟹  t=9.00  ⟹  t=3.00 sh = \left(\frac{1}{2}\right)gt^2 \implies t = \sqrt{\frac{2h}{g}} \implies t = \sqrt{\frac{2 \times 44.1}{9.80}} \implies t = \sqrt{9.00} \implies t = 3.00\text{ s}

  2. Step 2

    R=v0t  ⟹  R=15.0×3.00  ⟹  R=45.0 mR = v_0 t \implies R = 15.0 \times 3.00 \implies R = 45.0\text{ m}

  3. Step 3

    vf=vy=gt  ⟹  vf=9.80×3.00  ⟹  vf=29.4 m/sv_f = v_y = gt \implies v_f = 9.80 \times 3.00 \implies v_f = 29.4\text{ m/s}

    Correct

    vf=vfx2+vfy2=(15.0 m/s)2+(29.4 m/s)2≈33.0 m/sv_f = \sqrt{v_{fx}^2 + v_{fy}^2} = \sqrt{(15.0\text{ m/s})^2 + (29.4\text{ m/s})^2} \approx 33.0\text{ m/s}

    The value 29.4 m/s29.4\text{ m/s} is only the vertical velocity component vfyv_{fy}. Because the sphere continues moving horizontally at vfx=15.0 m/sv_{fx} = 15.0\text{ m/s}, the overall final speed is the vector magnitude vf=vfx2+vfy2v_f = \sqrt{v_{fx}^2 + v_{fy}^2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that vertical motion determines the time of flight and evaluated t=3.00 st = 3.00\text{ s}.

You used the constant horizontal velocity correctly to calculate the range R=45.0 mR = 45.0\text{ m}.

You correctly calculated the magnitude of the final vertical velocity component as vy=29.4 m/sv_y = 29.4\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of horizontal velocity component in resultant speed

You set vf=vyv_f = v_y, leaving out the horizontal velocity component vx=15.0 m/sv_x = 15.0\text{ m/s} from the final speed calculation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating speed at impact as purely 1D vertical motion rather than finding the magnitude of the 2D velocity vector v⃗=(vx,vy)\vec{v} = (v_x, v_y).

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-Dimensional Velocity Vector Magnitude
  • For any 2D projectile motion, speed is a scalar equal to the Euclidean magnitude of both orthogonal components: v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}.

  • Whenever you are asked for final speed in 2D kinematics, write down both vxv_x and vyv_y separately, then combine them using the Pythagorean theorem.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the constant horizontal velocity at impact: vfx=v0=15.0 m/sv_{fx} = v_0 = 15.0\text{ m/s}.

  2. Keep your calculated vertical velocity at impact: vfy=gt=29.4 m/sv_{fy} = gt = 29.4\text{ m/s}.

  3. Combine the perpendicular velocity components using the Pythagorean theorem: vf=vfx2+vfy2=15.02+29.42=225+864.36=1089.36 m/sv_f = \sqrt{v_{fx}^2 + v_{fy}^2} = \sqrt{15.0^2 + 29.4^2} = \sqrt{225 + 864.36} = \sqrt{1089.36}\text{ m/s}.

Final answer

vf≈33.0 m/sv_f \approx 33.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • In your final step, sketch the velocity triangle at impact with legs vxv_x and vyv_y to visually prompt the Pythagorean sum.

  • Check that your final speed is strictly greater than both individual components (vf>vfyv_f > v_{fy} and vf>vfxv_f > v_{fx}).

  • Practice combining perpendicular vectors in horizontal projectile problems.

OverviewACEpath Teacher's Diagnosis

03 The student adds the horizontal and vertical velocity components algebraically rather than vectorially using the Pythagorean theorem, resulting in an overestimated final speed.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    h=12gt2  ⟹  t=2hg=88.29.80=9.00  ⟹  t=3.00 sh = \frac{1}{2}gt^2 \implies t = \sqrt{\frac{2h}{g}} = \sqrt{\frac{88.2}{9.80}} = \sqrt{9.00} \implies t = 3.00\text{ s}

  2. Step 2

    R=v0t=15.0×3.00  ⟹  R=45.0 mR = v_0 t = 15.0 \times 3.00 \implies R = 45.0\text{ m}

  3. Step 3

    vy=gt=9.80×3.00=29.4 m/sv_y = gt = 9.80 \times 3.00 = 29.4\text{ m/s}

  4. Step 4

    vf=v0+vy  ⟹  vf=15.0+29.4  ⟹  vf=44.4 m/sv_f = v_0 + v_y \implies v_f = 15.0 + 29.4 \implies v_f = 44.4\text{ m/s}

    Correct

    vf=vx2+vy2=(15.0 m/s)2+(29.4 m/s)2≈33.0 m/sv_f = \sqrt{v_x^2 + v_y^2} = \sqrt{(15.0\text{ m/s})^2 + (29.4\text{ m/s})^2} \approx 33.0\text{ m/s}

    Horizontal and vertical velocities act along perpendicular axes. Because velocity is a vector, you must combine them using the Pythagorean theorem, vf=vx2+vy2v_f = \sqrt{v_x^2 + v_y^2}, rather than direct scalar addition.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the initial vertical velocity is zero and accurately computed the time of flight.

You used the constant horizontal velocity to calculate the horizontal range with complete precision.

You correctly computed the final vertical velocity component using gravitational acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar addition of perpendicular vector components

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated horizontal and vertical velocity components as parallel scalar quantities instead of mutually perpendicular components of a two-dimensional velocity vector.

REASONING PATH
Your ACEpath teacher’s suggested approach
Perpendicular Vector Addition
  • Perpendicular vector components v⃗x\vec{v}_x and v⃗y\vec{v}_y sum to a resultant magnitude via v=vx2+vy2v = \sqrt{v_x^2 + v_y^2}.

  • Always draw a right-triangle vector diagram when combining motion components before calculating the final speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the vector magnitude formula: vf=vx2+vy2v_f = \sqrt{v_x^2 + v_y^2}.

  2. Substitute the component values: vf=(15.0)2+(29.4)2=225+864.36v_f = \sqrt{(15.0)^2 + (29.4)^2} = \sqrt{225 + 864.36}.

  3. Evaluate the square root: vf=1089.36≈33.0 m/sv_f = \sqrt{1089.36} \approx 33.0\text{ m/s}.

Final answer

(a) t=3.00 st = 3.00\text{ s}; (b) R=45.0 mR = 45.0\text{ m}; (c) vf=33.0 m/sv_f = 33.0\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice combining perpendicular velocity vectors using the Pythagorean theorem rather than scalar addition.

  • Draw right-triangle velocity vector diagrams at the impact point to visualize how the hypotenuse represents the total speed.

Lock it in

Similar question

01

A stone is thrown horizontally from the top of a cliff of height h=19.6 mh = 19.6\text{ m} at an initial speed of v0=8.0 m/sv_0 = 8.0\text{ m/s}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, find: (a) the time of flight tt, and (b) the horizontal distance RR it travels before hitting the ground.

Answer

(a) t=2hg=2(19.6)9.80=2.00 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(19.6)}{9.80}} = 2.00\text{ s}; (b) R=v0t=(8.0 m/s)(2.00 s)=16.0 mR = v_0 t = (8.0\text{ m/s})(2.00\text{ s}) = 16.0\text{ m}.

02

A package is released horizontally from an aircraft flying at an altitude of h=500 mh = 500\text{ m} with a constant speed of v0=60.0 m/sv_0 = 60.0\text{ m/s}. Taking g=10.0 m/s2g = 10.0\text{ m/s}^2, determine: (a) the time of flight tt, and (b) the magnitude of the package's final velocity vfv_f just before impact.

Answer

(a) t=2hg=2(500)10.0=10.0 st = \sqrt{\frac{2h}{g}} = \sqrt{\frac{2(500)}{10.0}} = 10.0\text{ s}; (b) vfy=gt=(10.0)(10.0)=100 m/sv_{fy} = gt = (10.0)(10.0) = 100\text{ m/s}, so vf=vx2+vfy2=60.02+1002=3600+10000=13600≈116.6 m/sv_f = \sqrt{v_x^2 + v_{fy}^2} = \sqrt{60.0^2 + 100^2} = \sqrt{3600 + 10000} = \sqrt{13600} \approx 116.6\text{ m/s}.

03

A dart is projected horizontally from a height hh above level ground. If the platform height is increased by a factor of 44 while the horizontal launch speed v0v_0 is doubled, by what factor does the horizontal range RR increase?

Answer

Factor of 44. The time of flight scales as t=2hg∝ht = \sqrt{\frac{2h}{g}} \propto \sqrt{h}, so quadrupling hh doubles tt (t′=2tt' = 2t). Since R=v0tR = v_0 t, doubling both v0v_0 and tt yields R′=(2v0)(2t)=4RR' = (2v_0)(2t) = 4R.

Loading workspace…