Resources
A test vehicle drives clockwise around a circular proving-ground track of radius . Starting at the southernmost point of the track (defined as coordinates with the origin at the center of the ring), the vehicle drives along the perimeter until it reaches the exact northernmost point. For this half-lap transit: (a) determine the net displacement vector expressed in unit-vector notation, (b) calculate the scalar path distance traveled, and (c) determine the ratio of the total distance traveled to the magnitude of the displacement, .
Answer and steps
Final answer
(a) Net displacement vector: (magnitude due north); (b) Total distance: (or ); (c) Distance-to-displacement ratio: .
Steps
Part (a): Net Displacement Vector
Displacement () is a vector defined strictly as the change in position from the initial point to the final point:
-
Identify the initial and final position vectors:
- Initial position (south point):
- Final position (north point):
- Compute the difference:
The displacement vector points straight north along the -axis with a magnitude of:
Part (b): Scalar Path Distance
Distance () is the actual scalar length of the physical path traversed by the vehicle.
- The path forms a semicircle (half of the circular perimeter).
- The formula for the circumference of a circle is . Therefore, the arc length of a half-lap is:
- Substitute the given radius :
Part (c): Ratio of Distance to Magnitude of Displacement
- Set up the ratio using the algebraic expressions:
- Calculate the decimal value:
(Common Pitfall: Confusing distance with displacement. Distance depends on the actual route taken and is always positive, whereas displacement depends only on the endpoints and represents the straight-line shortcut between them. Because a straight line is the shortest distance between two points, always holds).
Typical errors
01 The student confuses the net displacement vector with the final position vector, taking Δr = r_f rather than r_f - r_i.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You correctly recorded the initial and final position coordinates, but you wrote , which is just the final position . Displacement is the change in position vector, defined as , giving a straight-line vector from south to north of length .
- Step 2
- Step 3
| | = 85.0 = = 3.14$
Correct= = 1.57$
Your division method was sound, but your result of (which equals ) was affected by carrying forward the incorrect displacement magnitude instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the coordinates of both the starting position and the ending position.
You correctly determined the scalar distance traveled around the semicircle as .
You correctly set up the ratio of distance to displacement magnitude.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo, this is a conceptual misunderstanding of the definition of displacement as a change in position rather than an absolute coordinate.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the net displacement as the final position vector relative to the origin at the center, forgetting to subtract the initial position vector .
REASONING PATH
Your ACEpath teacher’s suggested approach- Position vs. Displacement
Position is location relative to an arbitrary origin; displacement is the straight-line vector directed from the starting point to the ending point, independent of where the origin is placed.
Always write out explicitly and check that its magnitude matches the straight-line shortcut distance between the two physical endpoints.
CORRECTED PATH
ACEpath Teacher's DemonstrationCompute the vector difference between the final and initial positions: .
Find the magnitude of the displacement: .
Re-evaluate the ratio of path distance to displacement magnitude: .
(a) ; (b) ; (c)
02 The student calculates the full circumference of the circle instead of the half-circle perimeter for the half-lap transit.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The vehicle only traveled a half-lap from the southernmost point to the northernmost point along the perimeter, which is a semicircle of arc length , not a full circumference .
- Step 3Correct
Your ratio calculation followed logically from your value in part (b), but it was affected by using the full circumference distance of instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly represented position vectors using Cartesian unit-vector notation.
You applied the vector subtraction definition without sign errors.
You correctly set up the ratio of path distance to displacement magnitude.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the full circle circumference formula instead of halving it for a transit between opposite poles.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou overlooked the fractional path specified in the problem statement ("half-lap transit" from south to north), substituting the standard full circumference without adjusting for the semicircular arc length.
REASONING PATH
Your ACEpath teacher’s suggested approach- Match Geometry to the Trajectory
For motion along a circular arc of radius spanning angle (in radians), the path distance is .
Always check whether the motion represents a full revolution () or a fraction of a lap (such as a semicircle with ).
- Sense-Check the Ratio
For a semicircle, the ratio of arc distance to straight-line diameter is .
Notice that a ratio of (or ) equals circumference over diameter, which would only occur if the object completed a full loop back to its starting point while measuring against a diameter.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that moving from the southernmost point to the northernmost point covers exactly half the perimeter: .
Calculate the scalar path distance: .
Compute the ratio of distance to displacement magnitude: .
(a) ; (b) ; (c)
03 The student calculates displacement as initial position minus final position, resulting in a sign error for the vector direction.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Displacement represents the net change in position and is defined as . Reversing the order to points the vector south instead of north.
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that traveling half of a circular track corresponds to a semicircular arc length of .
You correctly determined the magnitude of the straight-line displacement across the diameter of the track.
You correctly evaluated the numerical ratio of distance to displacement magnitude.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou defined displacement as initial position minus final position () rather than final position minus initial position (). Any change in a quantity denoted by is always 'final minus initial'.
REASONING PATH
Your ACEpath teacher’s suggested approach- Definition of Change (Delta)
In physics, any change is defined as final value minus initial value: .
Always write before substituting numerical coordinates.
- Vector Direction Intuition Check
A displacement vector must point from the starting location toward the ending location.
Check your diagram: moving from the south point to the north point goes in the (north) direction, so the component must be positive.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the definition of displacement: .
Substitute the position vectors: and .
Subtract: .
(a) ; (b) ; (c)
Lock it in
What is the fundamental difference between an object's position vector and its displacement vector ?
Position locates an object relative to the chosen origin . Displacement is the directed vector straight from the initial point to the final point, completely independent of the origin.
Similar question
A runner starts at the southernmost point of a circular track of radius with the origin at the center. The runner travels counterclockwise through three-quarters of a lap to reach the easternmost point . (a) Determine the net displacement vector in unit-vector notation. (b) Calculate the magnitude of the displacement .
Answer
(a) and . Net displacement: . (b) .
A cyclist travels along a circular velodrome track of radius . Starting at coordinates , she completes exactly one full lap back to the same point. Find (a) the scalar path distance traveled , (b) the net displacement vector , and (c) the ratio if defined.
Answer
(a) Distance is the full circumference: . (b) Since the initial and final positions are identical, . (c) Since , the ratio is undefined (division by zero).
A drone flies from an initial position to a final position along a semicircular arch centered at the origin . (a) What is the radius of the arch? (b) Find the net displacement vector and its magnitude. (c) Determine the ratio of the arc distance traveled to the displacement magnitude.
Answer
(a) . (b) , with magnitude . (c) Arc distance is . The ratio is .