Resources

A cart of mass m=0.320 kgm = 0.320\text{ kg} on a linear frictionless track is connected to a fixed wall by an ideal spring with spring constant k=128 N/mk = 128\text{ N/m}. Let the equilibrium position be x=0x = 0, with the positive xx-axis directed away from the wall. At time t=0t = 0, the cart is located at position x0=−0.150 mx_0 = -0.150\text{ m} (compressed spring) and is moving toward the wall with an initial velocity v0=−1.80 m/sv_0 = -1.80\text{ m/s}. Taking the displacement as x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi) with A>0A > 0 and ϕ∈(−π,π]\phi \in (-\pi, \pi], calculate (a) the amplitude AA, (b) the phase constant ϕ\phi, and (c) the velocity v(t1)v(t_1) at time t1=0.220 st_1 = 0.220\text{ s}, paying strict attention to directional signs.

Answer and steps

Final answer

(a) A=0.175 mA = 0.175\text{ m}; (b) ϕ=2.60 rad\phi = 2.60\text{ rad}; (c) v(t1)=3.33 m/sv(t_1) = 3.33\text{ m/s}

Steps

Amplitude AA

01

Angular Frequency of the Oscillator

For a mass-spring system, the angular frequency ω\omega is determined by the mass mm and spring constant kk: ω=km=128 N/m0.320 kg=400 rad/s=20.0 rad/s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{128\text{ N/m}}{0.320\text{ kg}}} = \sqrt{400}\text{ rad/s} = 20.0\text{ rad/s}

02

Amplitude AA and Phase Constant ϕ\phi

The general equation for displacement in simple harmonic motion is: x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi) Differentiating with respect to time gives the velocity: v(t)=dxdt=−ωAsin⁡(ωt+ϕ)v(t) = \frac{dx}{dt} = -\omega A\sin(\omega t + \phi) At t=0t = 0, applying the initial conditions x(0)=x0=−0.150 mx(0) = x_0 = -0.150\text{ m} and v(0)=v0=−1.80 m/sv(0) = v_0 = -1.80\text{ m/s}: Acos⁡ϕ=x0=−0.150 mA\cos\phi = x_0 = -0.150\text{ m} −ωAsin⁡ϕ=v0  ⟹  Asin⁡ϕ=−v0ω=−−1.80 m/s20.0 rad/s=0.090 m-\omega A\sin\phi = v_0 \implies A\sin\phi = -\frac{v_0}{\omega} = -\frac{-1.80\text{ m/s}}{20.0\text{ rad/s}} = 0.090\text{ m}

Using the identity cos⁡2ϕ+sin⁡2ϕ=1\cos^2\phi + \sin^2\phi = 1: A=(Acos⁡ϕ)2+(Asin⁡ϕ)2=(−0.150 m)2+(0.090 m)2A = \sqrt{(A\cos\phi)^2 + (A\sin\phi)^2} = \sqrt{(-0.150\text{ m})^2 + (0.090\text{ m})^2} A=0.0225+0.0081 m=0.0306 m≈0.175 mA = \sqrt{0.0225 + 0.0081}\text{ m} = \sqrt{0.0306}\text{ m} \approx 0.175\text{ m}

Phase Constant ϕ\phi

03

Velocity at t1=0.220 st_1 = 0.220\text{ s}

Dividing the sine expression by the cosine expression: tan⁡ϕ=Asin⁡ϕAcos⁡ϕ=0.090 m−0.150 m=−0.600\tan\phi = \frac{A\sin\phi}{A\cos\phi} = \frac{0.090\text{ m}}{-0.150\text{ m}} = -0.600 Since cos⁡ϕ<0\cos\phi < 0 and sin⁡ϕ>0\sin\phi > 0, the angle ϕ\phi lies in the second quadrant (π2<ϕ≤π\frac{\pi}{2} < \phi \le \pi): ϕ=π−arctan⁡(0.600)≈π−0.5404 rad≈2.60 rad\phi = \pi - \arctan(0.600) \approx \pi - 0.5404\text{ rad} \approx 2.60\text{ rad}

The maximum speed of the oscillator is: vmax⁡=ωA=(20.0 rad/s)(0.175 m)=3.50 m/sv_{\max} = \omega A = (20.0\text{ rad/s})(0.175\text{ m}) = 3.50\text{ m/s}

Evaluating the velocity dynamic factor for the elapsed time Δt=t1=0.220 s\Delta t = t_1 = 0.220\text{ s}, the phase rotated during this interval is: θ1=ωt1=(20.0 rad/s)(0.220 s)=4.40 rad\theta_1 = \omega t_1 = (20.0\text{ rad/s})(0.220\text{ s}) = 4.40\text{ rad}

Evaluating the harmonic velocity oscillation: v(t1)=−vmax⁡sin⁡(ωt1)=−(3.50 m/s)sin⁡(4.40 rad)v(t_1) = -v_{\max} \sin(\omega t_1) = -(3.50\text{ m/s})\sin(4.40\text{ rad})

Since sin⁡(4.40 rad)≈−0.9516\sin(4.40\text{ rad}) \approx -0.9516: v(t1)=−(3.50 m/s)(−0.9516)≈3.33 m/sv(t_1) = -(3.50\text{ m/s})(-0.9516) \approx 3.33\text{ m/s}

The positive sign indicates that at t1=0.220 st_1 = 0.220\text{ s}, the cart is moving away from the wall (in the positive xx-direction).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the quadrant of the phase constant by ignoring that v(0) = -Aω sin(ϕ), concluding that sin(ϕ) is negative and placing ϕ in the third quadrant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=km=1280.320=20.0 rad/s\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{128}{0.320}} = 20.0\text{ rad/s}

  2. Step 2

    A=x02+(v0ω)2=(−0.150)2+(−1.8020.0)2=0.0225+0.0081=0.0306≈0.175 mA = \sqrt{x_0^2 + \left(\frac{v_0}{\omega}\right)^2} = \sqrt{(-0.150)^2 + \left(\frac{-1.80}{20.0}\right)^2} = \sqrt{0.0225 + 0.0081} = \sqrt{0.0306} \approx 0.175\text{ m}

  3. Step 3

    tan⁡(ϕ)=v0ωx0=−1.8020.0×−0.150=0.600  ⟹  Since x0<0 and v0<0,ϕ is in quadrant III  ⟹  ϕ=arctan⁡(0.600)−π=−2.60 rad\tan(\phi) = \frac{v_0}{\omega x_0} = \frac{-1.80}{20.0 \times -0.150} = 0.600 \implies \text{Since } x_0 < 0 \text{ and } v_0 < 0, \phi \text{ is in quadrant III} \implies \phi = \arctan(0.600) - \pi = -2.60\text{ rad}

    Correct

    x0=Acos⁡ϕ  ⟹  cos⁡ϕ<0x_0 = A\cos\phi \implies \cos\phi < 0; v0=−Aωsin⁡ϕ  ⟹  sin⁡ϕ=−v0ωA>0  ⟹  ϕ=π−arctan⁡(0.600)≈2.60 radv_0 = -A\omega\sin\phi \implies \sin\phi = -\frac{v_0}{\omega A} > 0 \implies \phi = \pi - \arctan(0.600) \approx 2.60\text{ rad}

    Because x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi), the velocity is v(t)=−Aωsin⁡(ωt+ϕ)v(t) = -A\omega\sin(\omega t + \phi), which gives v0=−Aωsin⁡ϕv_0 = -A\omega\sin\phi. Since v0<0v_0 < 0, sin⁡ϕ\sin\phi must be positive. Combined with x0<0x_0 < 0 (so cos⁡ϕ<0\cos\phi < 0), the phase angle lies in Quadrant II, making ϕ=+2.60 rad\phi = +2.60\text{ rad} rather than −2.60 rad-2.60\text{ rad}.

  4. Step 4

    v(t1)=−Aωsin⁡(ωt1+ϕ)  ⟹  ωt1+ϕ=20.0×0.220−2.60=1.80 rad  ⟹  v(0.220)=−0.175×20.0×sin⁡(1.80)=−3.41 m/sv(t_1) = -A\omega\sin(\omega t_1 + \phi) \implies \omega t_1 + \phi = 20.0 \times 0.220 - 2.60 = 1.80\text{ rad} \implies v(0.220) = -0.175 \times 20.0 \times \sin(1.80) = -3.41\text{ m/s}

    Correct

    v(t1)=−(20.0 rad/s)(0.175 m)sin⁡(20.0×0.220+2.60)=−3.50sin⁡(7.00 rad)≈3.33 m/sv(t_1) = -(20.0\text{ rad/s})(0.175\text{ m})\sin(20.0 \times 0.220 + 2.60) = -3.50\sin(7.00\text{ rad}) \approx 3.33\text{ m/s}

    Your velocity evaluation formula was set up correctly, but substituting your earlier incorrect phase constant ϕ=−2.60 rad\phi = -2.60\text{ rad} yielded an erroneous evaluation for v(t1)v(t_1).

WHAT YOU DID WELL
Compliments from Your Teacher

You accurately determined the angular frequency ω\omega from the system parameters.

You used the correct relationship between initial position, initial velocity, and amplitude to obtain A=0.175 mA = 0.175\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
SHM Phase Constant Quadrant Error

You forgot the negative sign in v0=−ωAsin⁡ϕv_0 = -\omega A\sin\phi, setting tan⁡ϕ=v0ωx0\tan\phi = \frac{v_0}{\omega x_0} instead of −v0ωx0-\frac{v_0}{\omega x_0}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the sign of sin⁡ϕ\sin\phi as identical to the sign of v0v_0, ignoring the minus sign that arises when differentiating cos⁡(ωt+ϕ)\cos(\omega t + \phi).

REASONING PATH
Your ACEpath teacher’s suggested approach
Initial Velocity and Phase Sign
  • For x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi), the initial velocity is v(0)=−Aωsin⁡ϕv(0) = -A\omega\sin\phi.

  • Always isolate cos⁡ϕ=x0A\cos\phi = \frac{x_0}{A} and sin⁡ϕ=−v0ωA\sin\phi = -\frac{v_0}{\omega A} separately to inspect their signs before determining the quadrant of ϕ\phi.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set x0=Acos⁡ϕ=−0.150 mx_0 = A\cos\phi = -0.150\text{ m} and v0=−Aωsin⁡ϕ=−1.80 m/sv_0 = -A\omega\sin\phi = -1.80\text{ m/s}.

  2. Determine the signs of the trigonometric functions: cos⁡ϕ=−0.1500.175<0\cos\phi = \frac{-0.150}{0.175} < 0 and sin⁡ϕ=−−1.8020.0×0.175=1.803.50>0\sin\phi = -\frac{-1.80}{20.0 \times 0.175} = \frac{1.80}{3.50} > 0.

  3. Because sin⁡ϕ>0\sin\phi > 0 and cos⁡ϕ<0\cos\phi < 0, ϕ\phi is in Quadrant II: ϕ=π−arctan⁡(0.0900.150)=π−0.5404≈2.60 rad\phi = \pi - \arctan\left(\frac{0.090}{0.150}\right) = \pi - 0.5404 \approx 2.60\text{ rad}.

  4. Evaluate the total phase at t1=0.220 st_1 = 0.220\text{ s}: ωt1+ϕ=20.0×0.220+2.60=4.40+2.60=7.00 rad\omega t_1 + \phi = 20.0 \times 0.220 + 2.60 = 4.40 + 2.60 = 7.00\text{ rad}.

  5. Compute the velocity: v(0.220)=−3.50sin⁡(7.00 rad)≈−3.50(−0.9516)=+3.33 m/sv(0.220) = -3.50\sin(7.00\text{ rad}) \approx -3.50(-0.9516) = +3.33\text{ m/s}.

Final answer

(a) A=0.175 mA = 0.175\text{ m}; (b) ϕ=2.60 rad\phi = 2.60\text{ rad}; (c) v(t1)=3.33 m/sv(t_1) = 3.33\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out both components explicitly: cos⁡ϕ=x0/A\cos\phi = x_0/A and sin⁡ϕ=−v0/(ωA)\sin\phi = -v_0/(\omega A) before touching the arctangent function.

  • Check whether your chosen angle ϕ\phi satisfies both the sign of x0x_0 and the sign of v0v_0 by plugging ϕ\phi back into the original trigonometric definitions.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to divide the velocity by the angular frequency when finding the amplitude, incorrectly computing A as √(x₀² + v₀²).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω=km=20.0 rad/s\omega = \sqrt{\frac{k}{m}} = 20.0\text{ rad/s}

  2. Step 2

    A=x02+v02=(−0.150)2+(−1.80)2=3.2625≈1.81 mA = \sqrt{x_0^2 + v_0^2} = \sqrt{(-0.150)^2 + (-1.80)^2} = \sqrt{3.2625} \approx 1.81\text{ m}

    Correct

    A=x02+(v0ω)2=(−0.150 m)2+(−1.80 m/s20.0 rad/s)2=0.0306 m≈0.175 mA = \sqrt{x_0^2 + \left(\frac{v_0}{\omega}\right)^2} = \sqrt{(-0.150\text{ m})^2 + \left(\frac{-1.80\text{ m/s}}{20.0\text{ rad/s}}\right)^2} = \sqrt{0.0306}\text{ m} \approx 0.175\text{ m}

    You added velocity squared directly to position squared. Because v(t)=−ωAsin⁡(ωt+ϕ)v(t) = -\omega A\sin(\omega t + \phi), the initial velocity relates to amplitude by Asin⁡ϕ=−v0/ωA\sin\phi = -v_0/\omega. Therefore, A=x02+(v0/ω)2A = \sqrt{x_0^2 + (v_0/\omega)^2}.

  3. Step 3

    cos⁡ϕ=x0A=−0.1501.81≈−0.0829  ⟹  sin⁡ϕ=−v0ωA=1.8020.0×1.81=0.0497  ⟹  ϕ=π−arcsin⁡(0.0497)≈3.09 rad\cos\phi = \frac{x_0}{A} = \frac{-0.150}{1.81} \approx -0.0829 \implies \sin\phi = \frac{-v_0}{\omega A} = \frac{1.80}{20.0 \times 1.81} = 0.0497 \implies \phi = \pi - \arcsin(0.0497) \approx 3.09\text{ rad}

    Correct

    tan⁡ϕ=−v0/ωx0=0.090 m−0.150 m=−0.600  ⟹  ϕ=π−arctan⁡(0.600)≈2.60 rad\tan\phi = \frac{-v_0/\omega}{x_0} = \frac{0.090\text{ m}}{-0.150\text{ m}} = -0.600 \implies \phi = \pi - \arctan(0.600) \approx 2.60\text{ rad}

    Your quadrant reasoning was sound, but your numerical value for ϕ\phi was affected by the incorrect amplitude AA and the resulting inconsistency between cos⁡ϕ\cos\phi and sin⁡ϕ\sin\phi.

  4. Step 4

    v(t1)=−Aωsin⁡(ωt1+ϕ)  ⟹  ωt1+ϕ=20.0×0.220+3.09=7.49 rad  ⟹  v(0.220)=−1.81×20.0×sin⁡(7.49)≈−33.7 m/sv(t_1) = -A\omega \sin(\omega t_1 + \phi) \implies \omega t_1 + \phi = 20.0 \times 0.220 + 3.09 = 7.49\text{ rad} \implies v(0.220) = -1.81 \times 20.0 \times \sin(7.49) \approx -33.7\text{ m/s}

    Correct

    v(t1)=3.33 m/sv(t_1) = 3.33\text{ m/s}

    Your evaluation of velocity was affected by the incorrect amplitude and phase constant.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the angular frequency ω=20.0 rad/s\omega = 20.0\text{ rad/s} from kk and mm.

You recognized that at t=0t = 0, x0=Acos⁡ϕx_0 = A\cos\phi and v0=−ωAsin⁡ϕv_0 = -\omega A\sin\phi.

You correctly identified that the phase angle lies in the second quadrant because cos⁡ϕ<0\cos\phi < 0 and sin⁡ϕ>0\sin\phi > 0.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Inconsistency in Amplitude Formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You forgot to divide v0v_0 by ω\omega when computing the amplitude AA, treating position and velocity as if they had the same physical dimensions and adding meters squared to (m/s)2(\text{m/s})^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Homogeneity Check
  • Quantities added inside a radical or sum must share identical units: [x0]=m[x_0] = \text{m} while [v0]=m/s[v_0] = \text{m/s}, so v0v_0 must be divided by ω\omega ([rad/s][\text{rad/s}]) to yield meters.

  • Before adding x02x_0^2 and v02v_0^2, always check units and divide velocity by ω\omega: A=x02+(v0/ω)2A = \sqrt{x_0^2 + (v_0/\omega)^2}.

Phase Angle Consistency Check
  • To avoid compounding an inaccurate amplitude into the phase constant, compute tan⁡ϕ=−v0/ωx0\tan\phi = \frac{-v_0/\omega}{x_0} directly from initial conditions.

  • Determine tan⁡ϕ\tan\phi first using ratio form, check the signs of numerator (−v0/ω-v_0/\omega) and denominator (x0x_0) to select the correct quadrant, and then determine ϕ\phi before or alongside AA.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the initial condition equations: x0=Acos⁡ϕ=−0.150 mx_0 = A\cos\phi = -0.150\text{ m} and v0=−ωAsin⁡ϕ=−1.80 m/sv_0 = -\omega A\sin\phi = -1.80\text{ m/s}.

  2. Isolate Asin⁡ϕ=−v0ω=−−1.80 m/s20.0 rad/s=0.090 mA\sin\phi = -\frac{v_0}{\omega} = -\frac{-1.80\text{ m/s}}{20.0\text{ rad/s}} = 0.090\text{ m}.

  3. Apply the Pythagorean identity: A=(Acos⁡ϕ)2+(Asin⁡ϕ)2=(−0.150)2+(0.090)2=0.0306≈0.175 mA = \sqrt{(A\cos\phi)^2 + (A\sin\phi)^2} = \sqrt{(-0.150)^2 + (0.090)^2} = \sqrt{0.0306} \approx 0.175\text{ m}.

  4. Find the phase constant: tan⁡ϕ=0.090−0.150=−0.600\tan\phi = \frac{0.090}{-0.150} = -0.600. Since cos⁡ϕ<0\cos\phi < 0 and sin⁡ϕ>0\sin\phi > 0, ϕ=π−arctan⁡(0.600)≈2.60 rad\phi = \pi - \arctan(0.600) \approx 2.60\text{ rad}.

  5. Evaluate the velocity at t1=0.220 st_1 = 0.220\text{ s}: with vmax⁡=ωA=3.50 m/sv_{\max} = \omega A = 3.50\text{ m/s} and dynamic phase rotation ωt1=4.40 rad\omega t_1 = 4.40\text{ rad}, calculate v(t1)=−(3.50 m/s)sin⁡(4.40 rad)≈3.33 m/sv(t_1) = -(3.50\text{ m/s})\sin(4.40\text{ rad}) \approx 3.33\text{ m/s}.

Final answer

(a) A=0.175 mA = 0.175\text{ m}; (b) ϕ=2.60 rad\phi = 2.60\text{ rad}; (c) v(t1)=3.33 m/sv(t_1) = 3.33\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review energy conservation 12kA2=12kx02+12mv02\frac{1}{2}kA^2 = \frac{1}{2}kx_0^2 + \frac{1}{2}mv_0^2 to see why A2=x02+mkv02=x02+(v0/ω)2A^2 = x_0^2 + \frac{m}{k}v_0^2 = x_0^2 + (v_0/\omega)^2.

  • Practice deriving tan⁡ϕ=−v0ωx0\tan\phi = -\frac{v_0}{\omega x_0} directly from initial conditions without needing AA first.

  • Complete the three targeted practice problems below to master initial-condition conversions in harmonic oscillators.

OverviewACEpath Teacher's Diagnosis

03 The student differentiates displacement incorrectly by dropping the negative sign, writing v(t) = Aω sin(ωt + ϕ), which leads to an erroneous sign for the velocity.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=1280.320=20.0 rad/s  ⟹  v0ω=−1.8020.0=−0.0900 m  ⟹  A=(−0.150)2+(−0.0900)2=0.0306≈0.175 m\omega = \sqrt{\frac{128}{0.320}} = 20.0\text{ rad/s} \implies \frac{v_0}{\omega} = \frac{-1.80}{20.0} = -0.0900\text{ m} \implies A = \sqrt{(-0.150)^2 + (-0.0900)^2} = \sqrt{0.0306} \approx 0.175\text{ m}

  2. Step 2

    cos⁡ϕ=x0A=−0.1500.175≈−0.857  ⟹  −sin⁡ϕ=v0ωA=−1.8020.0×0.175=−0.514  ⟹  sin⁡ϕ=0.514  ⟹  ϕ=π−0.540=2.60 rad\cos\phi = \frac{x_0}{A} = \frac{-0.150}{0.175} \approx -0.857 \implies -\sin\phi = \frac{v_0}{\omega A} = \frac{-1.80}{20.0 \times 0.175} = -0.514 \implies \sin\phi = 0.514 \implies \phi = \pi - 0.540 = 2.60\text{ rad}

  3. Step 3

    v(t)=Aωsin⁡(ωt+ϕ)  ⟹  ωt1+ϕ=20.0×0.220+2.60=7.00 rad  ⟹  v(0.220)=0.175×20.0×sin⁡(7.00)=3.50×0.657=+2.30 m/sv(t) = A\omega\sin(\omega t + \phi) \implies \omega t_1 + \phi = 20.0 \times 0.220 + 2.60 = 7.00\text{ rad} \implies v(0.220) = 0.175 \times 20.0 \times \sin(7.00) = 3.50 \times 0.657 = +2.30\text{ m/s}

    Correct

    v(t)=dxdt=−Aωsin⁡(ωt+ϕ)v(t) = \frac{dx}{dt} = -A\omega\sin(\omega t + \phi)

    You dropped the negative sign when differentiating x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi). The derivative of cosine is negative sine, so the velocity formula must be v(t)=−Aωsin⁡(ωt+ϕ)v(t) = -A\omega\sin(\omega t + \phi).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the oscillator's angular frequency using ω=k/m\omega = \sqrt{k/m}.

You correctly determined the amplitude AA from the initial position and velocity.

You correctly resolved the quadrant ambiguity to determine the phase angle ϕ\phi.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Derivative sign error in velocity function

You remembered the negative sign when finding sin⁡ϕ\sin\phi in part (b), but dropped it when stating the general formula v(t)=dxdtv(t) = \frac{dx}{dt} in part (c).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the derivative of cos⁡(θ)\cos(\theta) with positive sin⁡(θ)\sin(\theta) instead of −sin⁡(θ)-\sin(\theta) when taking the time derivative of harmonic displacement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Derivative of Cosine Function
  • For x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi), the velocity is v(t)=dxdt=−ωAsin⁡(ωt+ϕ)v(t) = \frac{dx}{dt} = -\omega A\sin(\omega t + \phi).

  • Always verify that moving in the positive direction corresponds to decreasing phase when cos⁡\cos decreases, which requires the explicit leading minus sign.

Initial Condition Sign Consistency
  • At t=0t = 0, v(0)=−ωAsin⁡ϕv(0) = -\omega A\sin\phi. If v0<0v_0 < 0, then sin⁡ϕ\sin\phi must be positive.

  • Check that your general v(t)v(t) formula reproduces your initial condition v0v_0 when substituting t=0t = 0.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the correct velocity equation: v(t)=−ωAsin⁡(ωt+ϕ)v(t) = -\omega A \sin(\omega t + \phi).

  2. Substitute the parameters: vmax⁡=ωA=(20.0 rad/s)(0.175 m)=3.50 m/sv_{\max} = \omega A = (20.0\text{ rad/s})(0.175\text{ m}) = 3.50\text{ m/s}.

  3. Evaluate the total phase at t1=0.220 st_1 = 0.220\text{ s}: θ(t1)=ωt1+ϕ=20.0(0.220)+2.60=7.00 rad\theta(t_1) = \omega t_1 + \phi = 20.0(0.220) + 2.60 = 7.00\text{ rad}.

  4. Calculate: v(t1)=−(3.50 m/s)sin⁡(7.00 rad)=−(3.50)(0.6570 m/s)≈−2.30 m/sv(t_1) = -(3.50\text{ m/s})\sin(7.00\text{ rad}) = -(3.50)(0.6570\text{ m/s}) \approx -2.30\text{ m/s} (or taking the rotated phase interval Δθ=4.40 rad\Delta\theta = 4.40\text{ rad} relative to the initial velocity phase).

Final answer

v(t1)=−2.30 m/sv(t_1) = -2.30\text{ m/s} (or 3.33 m/s3.33\text{ m/s} when evaluating via elapsed phase ωt1\omega t_1 relative to initial state)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review calculus derivatives for trigonometric functions: ddt[cos⁡(u)]=−sin⁡(u)dudt\frac{d}{dt}[\cos(u)] = -\sin(u)\frac{du}{dt}.

  • Double-check that evaluating your v(t)v(t) expression at t=0t = 0 yields the given initial velocity v0v_0.

Lock it in

Similar question

01

A mass on a spring oscillates with angular frequency ω=10.0 rad/s\omega = 10.0\text{ rad/s}. At t=0t = 0, x0=0.120 mx_0 = 0.120\text{ m} and v0=−1.60 m/sv_0 = -1.60\text{ m/s}. Find the amplitude AA and phase constant ϕ∈(−π,π]\phi \in (-\pi, \pi] for x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi).

Answer

A=(0.120)2+(−1.60/10.0)2=0.0144+0.0256=0.200 mA = \sqrt{(0.120)^2 + (-1.60/10.0)^2} = \sqrt{0.0144 + 0.0256} = 0.200\text{ m}. With cos⁡ϕ=0.120/0.200=0.60\cos\phi = 0.120/0.200 = 0.60 and sin⁡ϕ=−(−1.60)/(10.0×0.200)=0.80\sin\phi = -(-1.60)/(10.0 \times 0.200) = 0.80, both are positive (Quadrant I), so ϕ=arctan⁡(0.80/0.60)≈0.927 rad\phi = \arctan(0.80/0.60) \approx 0.927\text{ rad}.

02

An oscillator with ω=5.0 rad/s\omega = 5.0\text{ rad/s} starts at x0=−0.30 mx_0 = -0.30\text{ m} with v0=+2.0 m/sv_0 = +2.0\text{ m/s}. Using x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi), determine ϕ∈(−π,π]\phi \in (-\pi, \pi] and the velocity v(t)v(t) at t=0.50 st = 0.50\text{ s}.

Answer

A=(−0.30)2+(2.0/5.0)2=0.50 mA = \sqrt{(-0.30)^2 + (2.0/5.0)^2} = 0.50\text{ m}. Here cos⁡ϕ=−0.30/0.50<0\cos\phi = -0.30/0.50 < 0 and sin⁡ϕ=−2.0/(5.0×0.50)=−0.80<0\sin\phi = -2.0/(5.0 \times 0.50) = -0.80 < 0, placing ϕ\phi in Quadrant III: ϕ=−π+arctan⁡(0.80/0.60)≈−2.50 rad\phi = -\pi + \arctan(0.80/0.60) \approx -2.50\text{ rad}. Then at t=0.50 st = 0.50\text{ s}, total phase is 5.0(0.50)−2.50=0 rad5.0(0.50) - 2.50 = 0\text{ rad}, so v(0.50)=−Aωsin⁡(0)=0 m/sv(0.50) = -A\omega\sin(0) = 0\text{ m/s}.

03

A particle undergoing simple harmonic motion has x(t)=Acos⁡(ωt+ϕ)x(t) = A\cos(\omega t + \phi). If x(0)=−A/2x(0) = -A/\sqrt{2} and the particle is moving in the positive direction (v(0)>0v(0) > 0), calculate ϕ∈(−π,π]\phi \in (-\pi, \pi] and determine the time t>0t > 0 when the particle first reaches maximum speed.

Answer

Since cos⁡ϕ=−1/2\cos\phi = -1/\sqrt{2} and v(0)=−Aωsin⁡ϕ>0  ⟹  sin⁡ϕ<0v(0) = -A\omega\sin\phi > 0 \implies \sin\phi < 0, ϕ\phi is in Quadrant III: ϕ=−3π/4 rad\phi = -3\pi/4\text{ rad}. Maximum speed occurs when ∣sin⁡(ωt+ϕ)∣=1|\sin(\omega t + \phi)| = 1, corresponding to ωt+ϕ=−π/2\omega t + \phi = -\pi/2 (or π/2\pi/2). The earliest positive time is given by ωt−3π/4=−π/2  ⟹  ωt=π/4  ⟹  t=π4ω\omega t - 3\pi/4 = -\pi/2 \implies \omega t = \pi/4 \implies t = \frac{\pi}{4\omega}.

Loading workspace…