Resources

An industrial high-voltage DC supply delivers an electromotive force E=200 V\mathcal{E} = 200\text{ V} and has a fixed non-zero internal resistance r=5.00 Ωr = 5.00\,\Omega. The supply is connected across an external parallel array consisting of NN identical load resistors, each having resistance R=250 ΩR = 250\,\Omega. (a) Derive an expression for the total power Pload(N)P_{\text{load}}(N) dissipated by the external parallel array as a function of NN. (b) Determine the asymptotic limit of the total power dissipated in the load as N→∞N \to \infty, and (c) find the total power dissipated internally inside the battery's internal resistance rr in this extreme asymptotic limit.

Answer and steps

Final answer

(a) Pload(N)=(200)2⋅250N(5.00+250N)2=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = \frac{(200)^2 \cdot \frac{250}{N}}{\left(5.00 + \frac{250}{N}\right)^2} = \frac{1.00 \times 10^7 N}{(5.00 N + 250)^2}\text{ W}; (b) lim⁡N→∞Pload(N)=0 W\lim_{N \to \infty} P_{\text{load}}(N) = 0\text{ W}; (c) Pinternal=8.00 kWP_{\text{internal}} = 8.00\text{ kW} (8000 W8000\text{ W})

Steps

Part (a): Derive the Expression for Pload(N)P_{\text{load}}(N)

  1. Find the equivalent resistance of the load: The external load consists of NN identical resistors of resistance R=250 ΩR = 250\text{ }\Omega connected in parallel. The equivalent load resistance RloadR_{\text{load}} is given by: Rload=RN=250N ΩR_{\text{load}} = \frac{R}{N} = \frac{250}{N}\text{ }\Omega
  2. Determine the total circuit current: The load is in series with the battery's internal resistance r=5.00 Ωr = 5.00\text{ }\Omega. Therefore, the total resistance of the entire circuit is: Rtotal=r+Rload=5.00+250N=5.00N+250N ΩR_{\text{total}} = r + R_{\text{load}} = 5.00 + \frac{250}{N} = \frac{5.00N + 250}{N}\text{ }\Omega

    Applying Ohm's law, the total circuit current II drawn from the source of electromotive force E=200 V\mathcal{E} = 200\text{ V} is: I=ERtotal=2005.00+250N=200N5.00N+250 AI = \frac{\mathcal{E}}{R_{\text{total}}} = \frac{200}{5.00 + \frac{250}{N}} = \frac{200N}{5.00N + 250}\text{ A}

  3. Calculate the power dissipated by the load: The total electrical power dissipated across the load array is Pload=I2RloadP_{\text{load}} = I^2 R_{\text{load}}: Pload(N)=(2005.00+250N)2⋅250N=(200)2⋅250N(5.00+250N)2P_{\text{load}}(N) = \left(\frac{200}{5.00 + \frac{250}{N}}\right)^2 \cdot \frac{250}{N} = \frac{(200)^2 \cdot \frac{250}{N}}{\left(5.00 + \frac{250}{N}\right)^2}

    Multiplying the numerator and denominator by N2N^2: Pload(N)=40 000⋅250N⋅N2[(5.00+250N)N]2=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = \frac{40\,000 \cdot \frac{250}{N} \cdot N^2}{\left[\left(5.00 + \frac{250}{N}\right) N\right]^2} = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}


Part (b): Asymptotic Limit of Load Power as N→∞N \to \infty

To evaluate the limit of Pload(N)P_{\text{load}}(N) as NN grows infinitely large: lim⁡N→∞Pload(N)=lim⁡N→∞1.00×107N25.0N2+2500N+62 500\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \frac{1.00 \times 10^7 N}{25.0 N^2 + 2500 N + 62\,500}

Divide the numerator and denominator by N2N^2: lim⁡N→∞Pload(N)=lim⁡N→∞1.00×107N25.0+2500N+62 500N2=025.0=0 W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \frac{\frac{1.00 \times 10^7}{N}}{25.0 + \frac{2500}{N} + \frac{62\,500}{N^2}} = \frac{0}{25.0} = 0\text{ W}

Physical meaning: As N→∞N \to \infty, the parallel combination approaches a short circuit (Rload→0 ΩR_{\text{load}} \to 0\text{ }\Omega). The voltage drop across the load drops to zero, resulting in zero power transferred to the load.


Part (c): Power Dissipated Internally as N→∞N \to \infty

  1. Find the limiting circuit current: As Rload→0R_{\text{load}} \to 0, the circuit current reaches the short-circuit limit determined entirely by the internal resistance rr: Isc=lim⁡N→∞I=Er=200 V5.00 Ω=40.0 AI_{\text{sc}} = \lim_{N \to \infty} I = \frac{\mathcal{E}}{r} = \frac{200\text{ V}}{5.00\text{ }\Omega} = 40.0\text{ A}
  2. Calculate internal power dissipation: The power dissipated as heat within the internal resistance is given by: Pinternal=Isc2⋅r=(40.0 A)2⋅5.00 Ω=1600⋅5.00=8000 W=8.00 kWP_{\text{internal}} = I_{\text{sc}}^2 \cdot r = (40.0\text{ A})^2 \cdot 5.00\text{ }\Omega = 1600 \cdot 5.00 = 8000\text{ W} = 8.00\text{ kW}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the N parallel resistors as being in series, leading to R_eq = N·R instead of R/N.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Req=250N ΩR_{\text{eq}} = 250N\,\Omega

    Correct

    Rload=RN=250N ΩR_{\text{load}} = \frac{R}{N} = \frac{250}{N}\,\Omega

    You multiplied RR by NN as if the resistors were in series. For NN identical resistors connected in parallel, each additional branch provides an alternate pathway for current, so the equivalent resistance is Rload=RNR_{\text{load}} = \frac{R}{N}.

  2. Step 2

    I=Er+Req=2005.00+250N  ⟹  Pload(N)=I2⋅Req=[2005.00+250N]2⋅(250N)=10,000,000N(5.00+250N)2 WI = \frac{\mathcal{E}}{r + R_{\text{eq}}} = \frac{200}{5.00 + 250N} \implies P_{\text{load}}(N) = I^2 \cdot R_{\text{eq}} = \left[\frac{200}{5.00 + 250N}\right]^2 \cdot (250N) = \frac{10{,}000{,}000N}{(5.00 + 250N)^2}\text{ W}

    Correct

    I=2005.00+250N  ⟹  Pload(N)=I2⋅Rload=1.00×107N(5.00N+250)2 WI = \frac{200}{5.00 + \frac{250}{N}} \implies P_{\text{load}}(N) = I^2 \cdot R_{\text{load}} = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}

    Your application of I=Er+RloadI = \frac{\mathcal{E}}{r + R_{\text{load}}} and P=I2RP = I^2 R was algebraically sound, but the expression carries forward your incorrect load resistance Req=250NR_{\text{eq}} = 250N.

  3. Step 3

    lim⁡N→∞Pload(N)=lim⁡N→∞[10,000,000N62500N2+2500N+25]=0 W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \left[\frac{10{,}000{,}000N}{62500N^2 + 2500N + 25}\right] = 0\text{ W}

    Correct

    lim⁡N→∞Pload(N)=lim⁡N→∞1.00×107N25.0N2+2500N+62 500=0 W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \frac{1.00 \times 10^7 N}{25.0N^2 + 2500N + 62\,500} = 0\text{ W}

    While your mathematical limit yielded 0 W0\text{ W}, the underlying physical reason was reversed: with the correct parallel formula, Pload→0P_{\text{load}} \to 0 because Rload→0R_{\text{load}} \to 0 (a short circuit), whereas your formula approached zero because Req→∞R_{\text{eq}} \to \infty (an open circuit).

  4. Step 4

    As N→∞, Rtotal→∞, so I→0 A  ⟹  Pint=I2⋅r=0 W\text{As } N \to \infty,\, R_{\text{total}} \to \infty,\text{ so } I \to 0\text{ A} \implies P_{\text{int}} = I^2 \cdot r = 0\text{ W}

    Correct

    Isc=lim⁡N→∞I=Er=200 V5.00 Ω=40.0 A  ⟹  Pinternal=Isc2r=(40.0 A)2(5.00 Ω)=8000 WI_{\text{sc}} = \lim_{N \to \infty} I = \frac{\mathcal{E}}{r} = \frac{200\text{ V}}{5.00\,\Omega} = 40.0\text{ A} \implies P_{\text{internal}} = I_{\text{sc}}^2 r = (40.0\text{ A})^2 (5.00\,\Omega) = 8000\text{ W}

    Because of your inverted resistance formula, you concluded that the circuit current drops to zero. In reality, adding infinitely many parallel branches drives the load resistance to zero, causing the battery to deliver its maximum short-circuit current of 40.0 A40.0\text{ A} and dissipating 8.00 kW8.00\text{ kW} inside rr.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used Ohm's law to express total current from electromotive force and total circuit resistance.

You applied the Joule heating formula P=I2RP = I^2 R consistently for both the load and the internal resistance.

You evaluated algebraic limits as N→∞N \to \infty correctly according to polynomial degrees.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Parallel vs Series Equivalent Resistance

You wrote Req=N⋅RR_{\text{eq}} = N \cdot R instead of Req=RNR_{\text{eq}} = \frac{R}{N} for identical resistors connected in parallel.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the equivalent resistance scaling rules for series and parallel networks: series additions increase total resistance (Rseries=NRR_{\text{series}} = N R), whereas parallel additions decrease total resistance because each new resistor opens an additional path for current (1Rparallel=NR  ⟹  Rparallel=RN\frac{1}{R_{\text{parallel}}} = \frac{N}{R} \implies R_{\text{parallel}} = \frac{R}{N}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Branching vs Chaining
  • For NN identical resistors of resistance RR, parallel connection gives Req=RNR_{\text{eq}} = \frac{R}{N}, while series connection gives Req=NRR_{\text{eq}} = N R.

  • Whenever you see 'parallel', remind yourself that adding branches must make the equivalent resistance smaller than any individual branch.

Perform an Asymptotic Sanity Check
  • Connecting more parallel paths across a voltage source draws more total current, never less.

  • Test N=1N=1 versus N=2N=2: two 250 Ω250\,\Omega resistors in parallel must equal 125 Ω125\,\Omega, not 500 Ω500\,\Omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set Rload=RN=250N ΩR_{\text{load}} = \frac{R}{N} = \frac{250}{N}\,\Omega.

  2. Compute total circuit resistance: Rtotal=r+Rload=5.00+250N=5.00N+250N ΩR_{\text{total}} = r + R_{\text{load}} = 5.00 + \frac{250}{N} = \frac{5.00N + 250}{N}\,\Omega.

  3. Determine current: I=ERtotal=200N5.00N+250 AI = \frac{\mathcal{E}}{R_{\text{total}}} = \frac{200N}{5.00N + 250}\text{ A}.

  4. Calculate load power: Pload(N)=I2Rload=(200N5.00N+250)2(250N)=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = I^2 R_{\text{load}} = \left(\frac{200N}{5.00N + 250}\right)^2 \left(\frac{250}{N}\right) = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}.

  5. Take the limit for load power: as N→∞N \to \infty, the denominator is quadratic while the numerator is linear, so lim⁡N→∞Pload(N)=0 W\lim_{N \to \infty} P_{\text{load}}(N) = 0\text{ W}.

  6. Evaluate internal dissipation in the limit: as N→∞N \to \infty, Rload→0R_{\text{load}} \to 0, so I→Er=2005.00=40.0 AI \to \frac{\mathcal{E}}{r} = \frac{200}{5.00} = 40.0\text{ A}, yielding Pinternal=(40.0)2(5.00)=8000 WP_{\text{internal}} = (40.0)^2 (5.00) = 8000\text{ W}.

Final answer

(a) Pload(N)=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}; (b) 0 W0\text{ W}; (c) 8.00 kW8.00\text{ kW} (8000 W8000\text{ W})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the reciprocal formula for parallel resistors: 1Req=∑1Ri\frac{1}{R_{\text{eq}}} = \sum \frac{1}{R_i}.

  • Before taking limits, verify that your formula predicts a smaller resistance when more parallel branches are added.

  • Practice finding internal vs load power dissipation under short-circuit conditions.

OverviewACEpath Teacher's Diagnosis

02 The student assumes the supply provides an ideal constant voltage across the load, neglecting internal resistance when calculating load voltage.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Req=RN=250N ΩR_{\text{eq}} = \frac{R}{N} = \frac{250}{N}\,\Omega

  2. Step 2

    Vload=E=200 V  ⟹  Pload(N)=Vload2Req=(200)2250N=160N WV_{\text{load}} = E = 200\text{ V} \implies P_{\text{load}}(N) = \frac{V_{\text{load}}^2}{R_{\text{eq}}} = \frac{(200)^2}{\frac{250}{N}} = 160N\text{ W}

    Correct

    I(N)=Er+RN=2005.00+250N  ⟹  Pload(N)=I2Rload=1.00×107N(5.00N+250)2 WI(N) = \frac{\mathcal{E}}{r + \frac{R}{N}} = \frac{200}{5.00 + \frac{250}{N}} \implies P_{\text{load}}(N) = I^2 R_{\text{load}} = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}

    Because the supply has an internal resistance r=5.00 Ωr = 5.00\,\Omega in series with the load, the terminal voltage is Vload=E−IrV_{\text{load}} = \mathcal{E} - Ir, not a fixed 200 V200\text{ V}. You must express current as I=Er+RloadI = \frac{\mathcal{E}}{r + R_{\text{load}}} before calculating power.

  3. Step 3

    lim⁡N→∞Pload(N)=lim⁡N→∞160N=∞ W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} 160N = \infty\text{ W}

    Correct

    lim⁡N→∞Pload(N)=lim⁡N→∞1.00×107N25.0N2+2500N+62 500=0 W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \frac{1.00 \times 10^7 N}{25.0N^2 + 2500N + 62\,500} = 0\text{ W}

    Your limit evaluation followed algebraically from your linear expression in Step 2. With the correct expression, the denominator grows as N2N^2 while the numerator grows as NN, driving the load power to 0 W0\text{ W} as the parallel array approaches a short circuit.

  4. Step 4

    I=Er=2005.00=40.0 A  ⟹  Pint=I2⋅r=(40.0)2⋅5.00=8000 WI = \frac{E}{r} = \frac{200}{5.00} = 40.0\text{ A} \implies P_{\text{int}} = I^2 \cdot r = (40.0)^2 \cdot 5.00 = 8000\text{ W}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly simplified NN identical parallel resistors into an equivalent resistance of 250N Ω\frac{250}{N}\,\Omega.

You correctly evaluated the short-circuit current and internal power dissipation in Part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Neglecting internal resistance in terminal voltage calculation

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated a real voltage source with internal resistance as an ideal constant-voltage source across the load terminals, overlooking the fact that current passing through rr creates an internal voltage drop that reduces the terminal voltage as load decreases.

REASONING PATH
Your ACEpath teacher’s suggested approach
Terminal Voltage of a Real Source
  • For a real source with internal resistance rr, the terminal voltage is Vterminal=E−IrV_{\text{terminal}} = \mathcal{E} - Ir, which varies with current.

  • Always find total circuit resistance Rtotal=r+RloadR_{\text{total}} = r + R_{\text{load}} and circuit current I=ERtotalI = \frac{\mathcal{E}}{R_{\text{total}}} first before determining load voltage or power.

Load Power Scaling
  • Pload=I2Rload=E2Rload(r+Rload)2P_{\text{load}} = I^2 R_{\text{load}} = \frac{\mathcal{E}^2 R_{\text{load}}}{(r + R_{\text{load}})^2}.

  • Do not use P=E2RloadP = \frac{\mathcal{E}^2}{R_{\text{load}}} unless the source is explicitly stated to be ideal (r=0r = 0).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the total equivalent resistance of the entire series-parallel circuit: Rtotal(N)=r+Req=5.00+250N=5.00N+250N ΩR_{\text{total}}(N) = r + R_{\text{eq}} = 5.00 + \frac{250}{N} = \frac{5.00N + 250}{N}\,\Omega.

  2. Determine circuit current from Ohm's law: I(N)=ERtotal=200N5.00N+250 AI(N) = \frac{\mathcal{E}}{R_{\text{total}}} = \frac{200N}{5.00N + 250}\text{ A}.

  3. Calculate load power using Pload(N)=I2Req=(200N5.00N+250)2(250N)=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = I^2 R_{\text{eq}} = \left(\frac{200N}{5.00N + 250}\right)^2 \left(\frac{250}{N}\right) = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}.

  4. Take the limit as N→∞N \to \infty: lim⁡N→∞1.00×107N25.0N2+2500N+62 500=0 W\lim_{N \to \infty} \frac{1.00 \times 10^7 N}{25.0N^2 + 2500N + 62\,500} = 0\text{ W}.

Final answer

(a) Pload(N)=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}; (b) lim⁡N→∞Pload(N)=0 W\lim_{N \to \infty} P_{\text{load}}(N) = 0\text{ W}; (c) Pinternal=8000 WP_{\text{internal}} = 8000\text{ W} (8.00 kW8.00\text{ kW})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between source electromotive force E\mathcal{E} and terminal voltage V=E−IrV = \mathcal{E} - Ir.

  • Practice setting up single-loop circuits containing a real source by combining the internal resistance in series with the external load first.

  • Check limiting cases physically: an infinite number of parallel resistors forms a short circuit, which pulls terminal voltage down to zero, meaning zero power reaches the load.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the current when calculating electric power, using P = I · R_eq instead of I² · R_eq.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Req=250N Ω  ⟹  I=2005.00+250N=200N5.00N+250R_{eq} = \frac{250}{N}\,\Omega \implies I = \frac{200}{5.00 + \frac{250}{N}} = \frac{200N}{5.00N + 250}

  2. Step 2

    Pload(N)=I⋅Req=[200N5.00N+250]⋅250N=50,0005.00N+250 WP_{\text{load}}(N) = I \cdot R_{eq} = \left[\frac{200N}{5.00N + 250}\right] \cdot \frac{250}{N} = \frac{50{,}000}{5.00N + 250}\text{ W}

    Correct

    Pload(N)=I2Rload=(200N5.00N+250)2⋅250N=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = I^2 R_{\text{load}} = \left(\frac{200N}{5.00N + 250}\right)^2 \cdot \frac{250}{N} = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}

    You wrote P=I⋅ReqP = I \cdot R_{eq}, which is the expression for potential difference (V=IRV = I R), rather than power. Electric power dissipated across a resistance is given by P=I2RP = I^2 R or P=V2RP = \frac{V^2}{R}.

  3. Step 3

    lim⁡N→∞Pload(N)=lim⁡N→∞[50,0005.00N+250]=0 W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \left[\frac{50{,}000}{5.00N + 250}\right] = 0\text{ W}

    Correct

    lim⁡N→∞Pload(N)=lim⁡N→∞1.00×107N(5.00N+250)2=0 W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \frac{1.00 \times 10^7 N}{(5.00N + 250)^2} = 0\text{ W}

    Your limit calculation gave 0 W0\text{ W}, which matches the true physical value, but your evaluation relied on the incorrect linear power formula from the previous step.

  4. Step 4

    Isc=2005.00=40.0 A  ⟹  Pint=Isc2⋅r=(40.0)2⋅5.00=8000 WI_{sc} = \frac{200}{5.00} = 40.0\text{ A} \implies P_{int} = I_{sc}^2 \cdot r = (40.0)^2 \cdot 5.00 = 8000\text{ W}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the equivalent resistance of NN identical resistors in parallel.

You accurately formulated the total loop current using Ohm's law with internal resistance.

You correctly applied P=I2rP = I^2 r to evaluate the battery's internal dissipation in part (c).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula confusion: Power vs. Voltage ($P = I \cdot R$ instead of $I^2 R$)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the expression for electric potential difference (V=IRV = IR) with electrical power dissipation (P=IV=I2RP = IV = I^2 R), omitting the square on the current II.

REASONING PATH
Your ACEpath teacher’s suggested approach
Electric Power vs. Ohm's Law
  • Electrical power is P=V⋅I=I2R=V2RP = V \cdot I = I^2 R = \frac{V^2}{R}. Ohm's law gives potential difference: V=I⋅RV = I \cdot R.

  • Always verify units and dimensions: [I⋅R]=Volts[I \cdot R] = \text{Volts}, whereas [I2⋅R]=Watts[I^2 \cdot R] = \text{Watts}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Pload(N)=I2Rload=(200N5.00N+250)2(250N)P_{\text{load}}(N) = I^2 R_{\text{load}} = \left(\frac{200N}{5.00N + 250}\right)^2 \left(\frac{250}{N}\right)

  2. Pload(N)=40,000N2(5.00N+250)2⋅250N=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = \frac{40{,}000 N^2}{(5.00N + 250)^2} \cdot \frac{250}{N} = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}

  3. lim⁡N→∞Pload(N)=lim⁡N→∞1.00×107N25.0N2+2500N+62,500=0 W\lim_{N \to \infty} P_{\text{load}}(N) = \lim_{N \to \infty} \frac{1.00 \times 10^7 N}{25.0 N^2 + 2500 N + 62{,}500} = 0\text{ W}

Final answer

(a) Pload(N)=1.00×107N(5.00N+250)2 WP_{\text{load}}(N) = \frac{1.00 \times 10^7 N}{(5.00N + 250)^2}\text{ W}; (b) 0 W0\text{ W}; (c) 8000 W8000\text{ W}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check dimensional consistency of formulas before substituting expressions (I⋅RI \cdot R yields Volts, while I2⋅RI^2 \cdot R yields Watts).

  • Practice deriving power expressions using both P=I2RP = I^2 R and P=V2RP = \frac{V^2}{R} to confirm they match.

Lock it in

Similar question

01

A 12.0 V12.0\text{ V} battery with internal resistance r=1.00 Ωr = 1.00\,\Omega is connected across a parallel bank of NN identical 20.0 Ω20.0\,\Omega resistors. Find the total current I(N)I(N) supplied by the battery.

Answer

I(N)=12.0NN+20.0 AI(N) = \frac{12.0 N}{N + 20.0}\text{ A}. Key steps: Equivalent load resistance is Rload=20.0N ΩR_{\text{load}} = \frac{20.0}{N}\,\Omega. Total resistance is Rtotal=1.00+20.0N=N+20.0N ΩR_{\text{total}} = 1.00 + \frac{20.0}{N} = \frac{N + 20.0}{N}\,\Omega. Applying Ohm's law gives I=ERtotal=12.0NN+20.0 AI = \frac{\mathcal{E}}{R_{\text{total}}} = \frac{12.0 N}{N + 20.0}\text{ A}.

02

For the circuit in the previous problem, determine the power dissipated inside the battery's internal resistance as N→∞N \to \infty.

Answer

Pinternal=144 WP_{\text{internal}} = 144\text{ W}. Key steps: As N→∞N \to \infty, Rload=20.0N→0 ΩR_{\text{load}} = \frac{20.0}{N} \to 0\,\Omega, so the circuit approaches a short circuit with current Isc=12.0 V1.00 Ω=12.0 AI_{\text{sc}} = \frac{12.0\text{ V}}{1.00\,\Omega} = 12.0\text{ A}. Internal power dissipation is P=Isc2r=(12.0 A)2(1.00 Ω)=144 WP = I_{\text{sc}}^2 r = (12.0\text{ A})^2 (1.00\,\Omega) = 144\text{ W}.

03

A DC source with electromotive force E\mathcal{E} and internal resistance rr is connected to NN identical parallel resistors of resistance RR. Find the value of NN that maximizes the power delivered to the external load.

Answer

N=RrN = \frac{R}{r}. Key steps: By the Maximum Power Transfer Theorem, power transfer to the load is maximized when the load resistance matches the source internal resistance: Rload=rR_{\text{load}} = r. Since Rload=RNR_{\text{load}} = \frac{R}{N}, setting RN=r\frac{R}{N} = r yields N=RrN = \frac{R}{r}.

Loading workspace…