Resources

Planck's constant hh and the speed of light cc govern high-energy quantum phenomena. As quantum wavelength λ\lambda approaches the Planck length scale lP=ℏGc3l_P = \sqrt{\frac{\hbar G}{c^3}}, dimensional analysis yields the Planck mass mP=ℏcGm_P = \sqrt{\frac{\hbar c}{G}}, where ℏ=h2π\hbar = \frac{h}{2\pi}. Given that the SI base units of ℏ\hbar are kg⋅m2⋅s−1\text{kg}\cdot\text{m}^2\cdot\text{s}^{-1}, cc is m⋅s−1\text{m}\cdot\text{s}^{-1}, and GG is m3⋅kg−1⋅s−2\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}, prove by dimensional substitution that mPm_P reduces purely to the SI base unit of mass (kg\text{kg}), and compute its numerical value in kilograms using ℏ=1.055×10−34 J⋅s\hbar = 1.055\times 10^{-34}\text{ J}\cdot\text{s}, c=3.00×108 m/sc = 3.00\times 10^8\text{ m}/\text{s}, and G=6.67×10−11 m3⋅kg−1⋅s−2G = 6.67\times 10^{-11}\text{ m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}.

Answer and steps

Final answer

Substituting base units yields (kg⋅m2⋅s−1)(m⋅s−1)m3⋅kg−1⋅s−2=kg⋅m3⋅s−2m3⋅kg−1⋅s−2=kg2=kg\sqrt{\frac{(\text{kg}\cdot\text{m}^2\cdot\text{s}^{-1})(\text{m}\cdot\text{s}^{-1})}{\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}}} = \sqrt{\frac{\text{kg}\cdot\text{m}^3\cdot\text{s}^{-2}}{\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}}} = \sqrt{\text{kg}^2} = \text{kg}; mP=2.18×10−8 kgm_P = 2.18\times 10^{-8}\text{ kg}

Steps

01

Dimensional Analysis of the Planck Mass Formula

The Planck mass is given by: mP=ℏcGm_P = \sqrt{\frac{\hbar c}{G}}

Substitute the SI base units of each quantity into the expression:

  • [ℏ]=kg⋅m2⋅s−1[\hbar] = \text{kg}\cdot\text{m}^2\cdot\text{s}^{-1}
  • [c]=m⋅s−1[c] = \text{m}\cdot\text{s}^{-1}
  • [G]=m3⋅kg−1⋅s−2[G] = \text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}

First, simplify the numerator [ℏc][\hbar c]: [ℏc]=(kg⋅m2⋅s−1)(m⋅s−1)=kg⋅m3⋅s−2[\hbar c] = (\text{kg}\cdot\text{m}^2\cdot\text{s}^{-1})(\text{m}\cdot\text{s}^{-1}) = \text{kg}\cdot\text{m}^3\cdot\text{s}^{-2}

Next, divide by the units of GG: [ℏcG]=kg⋅m3⋅s−2m3⋅kg−1⋅s−2\left[\frac{\hbar c}{G}\right] = \frac{\text{kg}\cdot\text{m}^3\cdot\text{s}^{-2}}{\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}}

Cancel identical units in the numerator and denominator:

  • Length: m3m3=1\frac{\text{m}^3}{\text{m}^3} = 1
  • Time: s−2s−2=1\frac{\text{s}^{-2}}{\text{s}^{-2}} = 1
  • Mass: kgkg−1=kg1−(−1)=kg2\frac{\text{kg}}{\text{kg}^{-1}} = \text{kg}^{1 - (-1)} = \text{kg}^2

Taking the square root gives: [mP]=kg2=kg[m_P] = \sqrt{\text{kg}^2} = \text{kg}

Thus, the Planck mass reduces purely to the SI base unit of mass (kg\text{kg}).

Common Pitfall: When dividing by negative powers such as kg−1\text{kg}^{-1} in the denominator, remember that 1kg−1=kg\frac{1}{\text{kg}^{-1}} = \text{kg}. Do not mistakenly subtract the powers as 1−1=01 - 1 = 0.


02

Numerical Calculation of mPm_P

Substitute the given numerical values into the formula:

  • ℏ=1.055×10−34 J⋅s\hbar = 1.055\times 10^{-34}\text{ J}\cdot\text{s}
  • c=3.00×108 m/sc = 3.00\times 10^8\text{ m/s}
  • G=6.67×10−11 m3⋅kg−1⋅s−2G = 6.67\times 10^{-11}\text{ m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}

Calculate the numerator: ℏc=(1.055×10−34)⋅(3.00×108)=3.165×10−26 kg⋅m3⋅s−2\hbar c = (1.055\times 10^{-34}) \cdot (3.00\times 10^8) = 3.165\times 10^{-26}\text{ kg}\cdot\text{m}^3\cdot\text{s}^{-2}

Divide by GG: ℏcG=3.165×10−266.67×10−11≈4.7451×10−16 kg2\frac{\hbar c}{G} = \frac{3.165\times 10^{-26}}{6.67\times 10^{-11}} \approx 4.7451\times 10^{-16}\text{ kg}^2

Take the square root to find mPm_P: mP=4.7451×10−16 kg2≈2.18×10−8 kgm_P = \sqrt{4.7451\times 10^{-16}\text{ kg}^2} \approx 2.18\times 10^{-8}\text{ kg}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root of the expression when calculating the numerical value of the Planck mass, arriving at m_P² instead.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (kg⋅m2⋅s−1)(m⋅s−1)m3⋅kg−1⋅s−2=kg⋅m3⋅s−2m3⋅kg−1⋅s−2=kg2  ⟹  kg2=kg\frac{(\text{kg}\cdot\text{m}^2\cdot\text{s}^{-1})(\text{m}\cdot\text{s}^{-1})}{\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}} = \frac{\text{kg}\cdot\text{m}^3\cdot\text{s}^{-2}}{\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}} = \text{kg}^2 \implies \sqrt{\text{kg}^2} = \text{kg}

  2. Step 2

    mP=(1.055×10−34)(3.00×108)6.67×10−11  ⟹  mP=3.165×10−266.67×10−11  ⟹  mP=4.75×10−16 kgm_P = \frac{(1.055\times 10^{-34})(3.00\times 10^8)}{6.67\times 10^{-11}} \implies m_P = \frac{3.165\times 10^{-26}}{6.67\times 10^{-11}} \implies m_P = 4.75\times 10^{-16}\text{ kg}

    Correct

    mP=(1.055×10−34)(3.00×108)6.67×10−11=4.7451×10−16≈2.18×10−8 kgm_P = \sqrt{\frac{(1.055\times 10^{-34})(3.00\times 10^8)}{6.67\times 10^{-11}}} = \sqrt{4.7451\times 10^{-16}} \approx 2.18\times 10^{-8}\text{ kg}

    You forgot to apply the radical over the numerical expression. The value 4.75×10−164.75\times 10^{-16} equals ℏcG=mP2\frac{\hbar c}{G} = m_P^2, so you still need to take the principal square root.

WHAT YOU DID WELL
Compliments from Your Teacher

You substituted all given SI base units into the radical expression without any transcription errors.

You handled the division by negative exponents correctly to arrive at kg2\text{kg}^2 before taking the square root.

You accurately evaluated the inner fraction ℏcG≈4.75×10−16\frac{\hbar c}{G} \approx 4.75\times 10^{-16}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root in numerical evaluation

You remembered the square root for the dimensional units, but dropped the radical sign when writing down the numerical substitution.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating the radical as an intermediate step to be applied at the end rather than keeping the entire equation inside the square root symbol throughout the calculation led to forgetting the final radical operation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Keep the radical on every written line
  • If a formula defines a variable as y=Xy = \sqrt{X}, every equivalent step must explicitly retain …\sqrt{\dots} until the square root is extracted.

  • Write mP=…m_P = \sqrt{\dots} at the start of your numerical evaluation so you do not stop early at mP2m_P^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that your evaluated quotient represents mP2=4.7451×10−16 kg2m_P^2 = 4.7451\times 10^{-16}\text{ kg}^2.

  2. Take the square root of both the coefficient and the power of ten: 4.7451×10−16=4.7451×10−8≈2.18×10−8\sqrt{4.7451\times 10^{-16}} = \sqrt{4.7451}\times 10^{-8} \approx 2.18\times 10^{-8}.

Final answer

mP=2.18×10−8 kgm_P = 2.18\times 10^{-8}\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the target formula before starting numerical arithmetic and circle all outer powers or radicals.

  • Check that your final numerical unit matches your intermediate calculation: an intermediate result of kg2\text{kg}^2 indicates that a square root still needs to be taken.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the Planck length formula with the Planck mass formula and cubes the speed of light in the denominator.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (kg⋅m2⋅s−1)(m⋅s−1)m3⋅kg−1⋅s−2=kg⋅m3⋅s−2m3⋅kg−1⋅s−2=kg2  ⟹  kg2=kg\frac{(\text{kg}\cdot\text{m}^2\cdot\text{s}^{-1})(\text{m}\cdot\text{s}^{-1})}{\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}} = \frac{\text{kg}\cdot\text{m}^3\cdot\text{s}^{-2}}{\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}} = \text{kg}^2 \implies \sqrt{\text{kg}^2} = \text{kg}

  2. Step 2

    mP=(1.055×10−34)(6.67×10−11)(3.00×108)3m_P = \sqrt{\frac{(1.055 \times 10^{-34})(6.67 \times 10^{-11})}{(3.00 \times 10^8)^3}}

    Correct

    mP=ℏcG=(1.055×10−34)(3.00×108)6.67×10−11m_P = \sqrt{\frac{\hbar c}{G}} = \sqrt{\frac{(1.055 \times 10^{-34})(3.00 \times 10^8)}{6.67 \times 10^{-11}}}

    You evaluated ℏGc3\sqrt{\frac{\hbar G}{c^3}}, which is the Planck length formula lPl_P mentioned in the background of the question, rather than the Planck mass formula mP=ℏcGm_P = \sqrt{\frac{\hbar c}{G}}.

  3. Step 3

    mP=7.037×10−452.70×1025  ⟹  mP=2.606×10−70  ⟹  mP=1.61×10−35 kgm_P = \sqrt{\frac{7.037 \times 10^{-45}}{2.70 \times 10^{25}}} \implies m_P = \sqrt{2.606 \times 10^{-70}} \implies m_P = 1.61 \times 10^{-35}\text{ kg}

    Correct

    mP=3.165×10−266.67×10−11≈4.7451×10−16≈2.18×10−8 kgm_P = \sqrt{\frac{3.165 \times 10^{-26}}{6.67 \times 10^{-11}}} \approx \sqrt{4.7451 \times 10^{-16}} \approx 2.18 \times 10^{-8}\text{ kg}

    Your arithmetic on the values you entered was executed properly, but because you began with the Planck length formula, the resulting numerical value corresponds to the Planck length in meters rather than the Planck mass in kilograms.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly substituted the SI base units of ℏ\hbar, cc, and GG into the Planck mass expression and simplified them to kg\text{kg}.

You handled the exponent algebra of negative powers in the denominator accurately when simplifying units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Selection Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the Planck length definition lP=ℏGc3l_P = \sqrt{\frac{\hbar G}{c^3}} with the Planck mass definition mP=ℏcGm_P = \sqrt{\frac{\hbar c}{G}} when transitioning from the unit proof to the numerical evaluation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match the formula to the target quantity
  • When a prompt introduces multiple Planck scales as context, double-check which specific quantity and algebraic expression you are asked to compute before substituting numbers.

  • Explicitly write down mP=ℏcGm_P = \sqrt{\frac{\hbar c}{G}} at the start of your numerical calculation step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the formula: mP=ℏcGm_P = \sqrt{\frac{\hbar c}{G}}

  2. Substitute the given values: mP=(1.055×10−34 J⋅s)(3.00×108 m/s)6.67×10−11 m3⋅kg−1⋅s−2m_P = \sqrt{\frac{(1.055\times 10^{-34}\text{ J}\cdot\text{s})(3.00\times 10^8\text{ m/s})}{6.67\times 10^{-11}\text{ m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}}}

  3. Compute the numerator: (1.055×10−34)×(3.00×108)=3.165×10−26(1.055\times 10^{-34}) \times (3.00\times 10^8) = 3.165\times 10^{-26}

  4. Divide by GG: 3.165×10−266.67×10−11≈4.7451×10−16 kg2\frac{3.165\times 10^{-26}}{6.67\times 10^{-11}} \approx 4.7451\times 10^{-16}\text{ kg}^2

  5. Take the square root: mP=4.7451×10−16 kg2≈2.18×10−8 kgm_P = \sqrt{4.7451\times 10^{-16}\text{ kg}^2} \approx 2.18\times 10^{-8}\text{ kg}

Final answer

mP=2.18×10−8 kgm_P = 2.18\times 10^{-8}\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the target variable's algebraic formula right above your numerical substitution line to avoid pulling a neighboring formula from the problem text.

  • Check the magnitude of your result: 10−35 kg10^{-35}\text{ kg} is far smaller than an electron's mass (9.11×10−31 kg9.11\times 10^{-31}\text{ kg}), whereas the Planck mass is roughly 10−8 kg10^{-8}\text{ kg} (about the mass of a flea egg).

OverviewACEpath Teacher's Diagnosis

03 The student makes an algebraic sign error when simplifying the base units by subtracting negative exponents incorrectly, yielding kg / kg⁻¹ = 1 instead of kg².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (kg⋅m2⋅s−1)(m⋅s−1)(m3⋅kg−1⋅s−2)=(kg⋅m3⋅s−2)(m3⋅kg−1⋅s−2)\frac{(\text{kg}\cdot\text{m}^2\cdot\text{s}^{-1})(\text{m}\cdot\text{s}^{-1})}{(\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2})} = \frac{(\text{kg}\cdot\text{m}^3\cdot\text{s}^{-2})}{(\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2})}

  2. Step 2

    =kg1kg1=1  ⟹  1=dimensionless= \frac{\text{kg}^1}{\text{kg}^1} = 1 \implies \sqrt{1} = \text{dimensionless}

    Correct

    =kg1kg−1=kg1−(−1)=kg2  ⟹  kg2=kg= \frac{\text{kg}^1}{\text{kg}^{-1}} = \text{kg}^{1 - (-1)} = \text{kg}^2 \implies \sqrt{\text{kg}^2} = \text{kg}

    You mistakenly changed the denominator's unit from kg−1\text{kg}^{-1} to kg1\text{kg}^1. Dividing by a negative exponent adds to the numerator's power: kg1kg−1=kg1−(−1)=kg2\frac{\text{kg}^1}{\text{kg}^{-1}} = \text{kg}^{1 - (-1)} = \text{kg}^2. Taking the square root then gives kg\text{kg}.

  3. Step 3

    mP=(1.055×10−34)(3.00×108)(6.67×10−11)=4.745×10−16=2.18×10−8 kgm_P = \sqrt{\frac{(1.055 \times 10^{-34})(3.00 \times 10^8)}{(6.67 \times 10^{-11})}} = \sqrt{4.745 \times 10^{-16}} = 2.18 \times 10^{-8}\text{ kg}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly multiplied the base units in the numerator to get kg⋅m3⋅s−2\text{kg}\cdot\text{m}^3\cdot\text{s}^{-2}.

You canceled the length (m3\text{m}^3) and time (s−2\text{s}^{-2}) units between the numerator and denominator accurately.

You carried out the numerical calculation and scientific notation operations correctly to arrive at 2.18×10−8 kg2.18 \times 10^{-8}\text{ kg}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Negative Exponent Division Sign Error

You copied kg−1\text{kg}^{-1} from the denominator as kg1\text{kg}^1 when isolating the mass units.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You lost track of the negative sign in the exponent during fraction division, treating x1x−1\frac{x^1}{x^{-1}} as x1x1=1\frac{x^1}{x^1} = 1 instead of applying the quotient law of exponents xa−b=x1−(−1)=x2x^{a - b} = x^{1 - (-1)} = x^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Quotient Rule with Negative Exponents
  • xaxb=xa−b\frac{x^a}{x^b} = x^{a - b}, and specifically 1x−n=xn\frac{1}{x^{-n}} = x^n.

  • When a unit or variable in the denominator has a negative exponent, move it to the numerator with a positive sign before canceling.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Retain the negative exponent from the denominator: kgkg−1\frac{\text{kg}}{\text{kg}^{-1}}.

  2. Apply the exponent subtraction rule: kg1−(−1)=kg2\text{kg}^{1 - (-1)} = \text{kg}^2.

  3. Take the square root of the simplified unit: kg2=kg\sqrt{\text{kg}^2} = \text{kg}.

Final answer

[mP]=kg[m_P] = \text{kg} and mP=2.18×10−8 kgm_P = 2.18 \times 10^{-8}\text{ kg}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check signs whenever copying terms with negative exponents from a denominator.

  • Practice simplifying fractions with mixed positive and negative powers by flipping negative exponents across the fraction bar first.

Lock it in

Similar question

01

Using the Planck time formula tP=ℏGc5t_P = \sqrt{\frac{\hbar G}{c^5}}, verify its base units by dimensional substitution, given [ℏ]=kg⋅m2⋅s−1[\hbar] = \text{kg}\cdot\text{m}^2\cdot\text{s}^{-1}, [G]=m3⋅kg−1⋅s−2[G] = \text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}, and [c]=m⋅s−1[c] = \text{m}\cdot\text{s}^{-1}.

Answer

Substituting into the fraction gives (kg⋅m2⋅s−1)(m3⋅kg−1⋅s−2)(m⋅s−1)5=m5⋅s−3m5⋅s−5=s2\frac{(\text{kg}\cdot\text{m}^2\cdot\text{s}^{-1})(\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2})}{(\text{m}\cdot\text{s}^{-1})^5} = \frac{\text{m}^5\cdot\text{s}^{-3}}{\text{m}^5\cdot\text{s}^{-5}} = \text{s}^2. Taking the outer square root yields s2=s\sqrt{\text{s}^2} = \text{s}.

02

Calculate the numerical value of the Planck length lP=ℏGc3l_P = \sqrt{\frac{\hbar G}{c^3}} in meters, given ℏ=1.055×10−34 J⋅s\hbar = 1.055\times 10^{-34}\text{ J}\cdot\text{s}, G=6.67×10−11 m3⋅kg−1⋅s−2G = 6.67\times 10^{-11}\text{ m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}, and c=3.00×108 m/sc = 3.00\times 10^8\text{ m/s}. Be sure to complete all radical operations.

Answer

lP=1.62×10−35 ml_P = 1.62\times 10^{-35}\text{ m}. Inside the radical, ℏGc3=(1.055×10−34)(6.67×10−11)2.70×1025≈2.606×10−70 m2\frac{\hbar G}{c^3} = \frac{(1.055\times 10^{-34})(6.67\times 10^{-11})}{2.70\times 10^{25}} \approx 2.606\times 10^{-70}\text{ m}^2. Taking the square root gives 2.606×10−70≈1.62×10−35 m\sqrt{2.606\times 10^{-70}} \approx 1.62\times 10^{-35}\text{ m}.

03

An astrophysicist calculates a characteristic scale using R=(2GMc2)1/2R = \left(\frac{2GM}{c^2}\right)^{1/2} for an object where 2GMc2=9.00×106 m\frac{2GM}{c^2} = 9.00\times 10^6\text{ m}. Explain the dimensional error in the formula and state the correct expression for the Schwarzschild radius.

Answer

The fraction 2GMc2\frac{2GM}{c^2} already has SI units of length (m\text{m}), so raising it to the power 1/21/2 incorrectly yields m1/2\text{m}^{1/2}. The correct Schwarzschild radius is Rs=2GMc2R_s = \frac{2GM}{c^2} without any square root, giving 9.00×106 m9.00\times 10^6\text{ m}.

Loading workspace…