Resources

A small coin of mass mc=0.0200 kgm_c = 0.0200\text{ kg} rests on top of a flat horizontal block of mass Mb=0.800 kgM_b = 0.800\text{ kg}. The block is connected to a horizontal spring of stiffness k=125 N/mk = 125\text{ N/m} on a frictionless horizontal tabletop. The coefficient of static friction between the coin and the top surface of the block is μs=0.420\mu_s = 0.420. The assembly undergoes horizontal simple harmonic motion along the xx-axis. Determine the maximum oscillation amplitude AmaxA_{\text{max}} for which the coin will oscillate back and forth with the block without slipping at the turnaround points (use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer and steps

Final answer

Amax=0.0270 mA_{\text{max}} = 0.0270\text{ m}

Steps

01

Identify the condition for no slipping

For the coin to oscillate with the block without slipping, the horizontal acceleration of the coin must match the horizontal acceleration of the block at every point in the motion.

The only horizontal force acting on the coin is the static friction force fsf_s exerted by the block: fs=mcaf_s = m_c a

The maximum static friction force available to accelerate the coin is given by: fs,max=μsN=μsmcgf_{s,\text{max}} = \mu_s N = \mu_s m_c g

Therefore, the maximum acceleration the coin can achieve without slipping is: a≤fs,maxmc=μsga \le \frac{f_{s,\text{max}}}{m_c} = \mu_s g

02

Determine the maximum acceleration of the combined system

When the coin and block move together without slipping, they act as a single combined mass: Mtotal=Mb+mc=0.800 kg+0.0200 kg=0.820 kgM_{\text{total}} = M_b + m_c = 0.800\text{ kg} + 0.0200\text{ kg} = 0.820\text{ kg}

The angular frequency ω\omega of the horizontal mass-spring system is: ω=kMtotal\omega = \sqrt{\frac{k}{M_{\text{total}}}}

In simple harmonic motion with amplitude AA, the magnitude of the acceleration is greatest at the turnaround points (the endpoints of the motion, where displacement is x=±Ax = \pm A): amax=ω2A=kMtotalAa_{\text{max}} = \omega^2 A = \frac{k}{M_{\text{total}}} A

Common Pitfall: Forgetting to include the mass of the coin in the total oscillating mass Mtotal=Mb+mcM_{\text{total}} = M_b + m_c. Since the spring must accelerate both objects together, using only MbM_b leads to an incorrect oscillation frequency.

03

Solve for the maximum amplitude AmaxA_{\text{max}}

To avoid slipping at the turnaround points where the acceleration reaches its peak, the maximum acceleration must not exceed μsg\mu_s g: amax≤μsg  ⟹  kMtotalAmax=μsga_{\text{max}} \le \mu_s g \implies \frac{k}{M_{\text{total}}} A_{\text{max}} = \mu_s g

Rearranging for AmaxA_{\text{max}}: Amax=μsg(Mb+mc)kA_{\text{max}} = \frac{\mu_s g (M_b + m_c)}{k}

Substitute the given values: Amax=0.420⋅9.80 m/s2⋅0.820 kg125 N/mA_{\text{max}} = \frac{0.420 \cdot 9.80\text{ m/s}^2 \cdot 0.820\text{ kg}}{125\text{ N/m}}

Amax=3.37512 N125 N/m≈0.0270 mA_{\text{max}} = \frac{3.37512\text{ N}}{125\text{ N/m}} \approx 0.0270\text{ m}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to include the mass of the coin in the total oscillating mass when determining the system's angular frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    fs,max=μsmcg  ⟹  mcamax=μsmcg  ⟹  amax=μsg=0.420×9.80 m/s2=4.116 m/s2f_{s,\text{max}} = \mu_s m_c g \implies m_c a_{\text{max}} = \mu_s m_c g \implies a_{\text{max}} = \mu_s g = 0.420 \times 9.80\text{ m/s}^2 = 4.116\text{ m/s}^2

  2. Step 2

    ω2=kMb=1250.800=156.25 rad2/s2\omega^2 = \frac{k}{M_b} = \frac{125}{0.800} = 156.25\text{ rad}^2/\text{s}^2

    Correct

    ω2=kMb+mc=1250.800+0.0200=1250.820≈152.44 rad2/s2\omega^2 = \frac{k}{M_b + m_c} = \frac{125}{0.800 + 0.0200} = \frac{125}{0.820} \approx 152.44\text{ rad}^2/\text{s}^2

    When the coin rides on the block without slipping, both objects move together as one combined mass of Mtotal=Mb+mc=0.820 kgM_{\text{total}} = M_b + m_c = 0.820\text{ kg}. Using only MbM_b overestimates ω2\omega^2.

  3. Step 3

    Amax=amaxω2=4.116156.25=0.0263 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116}{156.25} = 0.0263\text{ m}

    Correct

    Amax=amaxω2=4.116152.44≈0.0270 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116}{152.44} \approx 0.0270\text{ m}

    Your relationship Amax=amaxω2A_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} is mathematically sound, but it yielded an incorrect numerical value due to the carried-forward value of ω2\omega^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly equated the maximum static friction force to mcamaxm_c a_{\text{max}} to determine the critical acceleration threshold.

You correctly identified that the maximum acceleration in simple harmonic motion is related to amplitude by amax=ω2Aa_{\text{max}} = \omega^2 A.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Coin Mass from Total Oscillating Mass

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When two stacked or coupled objects move together without relative motion in an oscillator, the restoring force from the spring must accelerate the entire combined mass (Mb+mcM_b + m_c), not just the block directly attached to the spring.

REASONING PATH
Your ACEpath teacher’s suggested approach
Oscillating Mass Identification
  • If multiple objects oscillate together without slipping, the effective mass attached to the spring is the sum of all moving components: Mtotal=∑miM_{\text{total}} = \sum m_i.

  • Before writing ω=k/m\omega = \sqrt{k/m}, explicitly list all objects undergoing the motion and sum their masses to define m=Mtotalm = M_{\text{total}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the combined mass of the block and coin: Mtotal=Mb+mc=0.800 kg+0.0200 kg=0.820 kgM_{\text{total}} = M_b + m_c = 0.800\text{ kg} + 0.0200\text{ kg} = 0.820\text{ kg}.

  2. Calculate the square of the angular frequency: ω2=kMtotal=125 N/m0.820 kg≈152.44 rad2/s2\omega^2 = \frac{k}{M_{\text{total}}} = \frac{125\text{ N/m}}{0.820\text{ kg}} \approx 152.44\text{ rad}^2/\text{s}^2.

  3. Substitute ω2\omega^2 into the maximum amplitude equation: Amax=amaxω2=4.116 m/s2152.44 rad2/s2≈0.0270 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116\text{ m/s}^2}{152.44\text{ rad}^2/\text{s}^2} \approx 0.0270\text{ m}.

Final answer

Amax=0.0270 mA_{\text{max}} = 0.0270\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always draw a system boundary around both objects to verify which masses the spring force must accelerate together.

  • Practice stacked-object oscillator problems where static friction couples an upper mass to a driven lower mass.

OverviewACEpath Teacher's Diagnosis

02 The student uses the mass of the coin instead of the total mass in the formula for the system's angular frequency.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    amax=μsg=0.420×9.80=4.116 m/s2a_{\text{max}} = \mu_s g = 0.420 \times 9.80 = 4.116\text{ m/s}^2

  2. Step 2

    ω2=kmc=1250.0200=6250 rad2/s2\omega^2 = \frac{k}{m_c} = \frac{125}{0.0200} = 6250\text{ rad}^2/\text{s}^2

    Correct

    ω2=kMb+mc=1250.800+0.0200=1250.820≈152.44 rad2/s2\omega^2 = \frac{k}{M_b + m_c} = \frac{125}{0.800 + 0.0200} = \frac{125}{0.820} \approx 152.44\text{ rad}^2/\text{s}^2

    Because the coin and the block move together without slipping, the spring accelerates both masses together. The total oscillating mass is Mtotal=Mb+mcM_{\text{total}} = M_b + m_c, not just mcm_c.

  3. Step 3

    Amax=amaxω2=4.1166250=0.000659 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116}{6250} = 0.000659\text{ m}

    Correct

    Amax=amaxω2=4.116152.44≈0.0270 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116}{152.44} \approx 0.0270\text{ m}

    Your relationship between amplitude, maximum acceleration, and angular frequency was applied correctly, but the result was affected by the incorrect value of ω2\omega^2 from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly found that static friction limits the maximum acceleration of the coin to μsg\mu_s g.

You used the correct simple harmonic motion relationship between amplitude and maximum acceleration, amax=ω2Aa_{\text{max}} = \omega^2 A.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Mass Selection Error in Oscillator Frequency

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the coin as if it were independently attached to the spring rather than oscillating as part of a composite system comprising both the block and the coin (Mtotal=Mb+mcM_{\text{total}} = M_b + m_c).

REASONING PATH
Your ACEpath teacher’s suggested approach
Oscillating System Boundary
  • When two objects move together without slipping, Newton's second law for the spring applies to their combined mass: Mtotal=Mblock+mcoinM_{\text{total}} = M_{\text{block}} + m_{\text{coin}}.

  • Always identify every mass accelerated by the restoring force before computing ω=kMtotal\omega = \sqrt{\frac{k}{M_{\text{total}}}}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the combined mass: Mtotal=Mb+mc=0.800 kg+0.0200 kg=0.820 kgM_{\text{total}} = M_b + m_c = 0.800\text{ kg} + 0.0200\text{ kg} = 0.820\text{ kg}.

  2. Find ω2=kMtotal=125 N/m0.820 kg≈152.44 s−2\omega^2 = \frac{k}{M_{\text{total}}} = \frac{125\text{ N/m}}{0.820\text{ kg}} \approx 152.44\text{ s}^{-2}.

  3. Solve for the maximum amplitude: Amax=amaxω2=4.116 m/s2152.44 s−2≈0.0270 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116\text{ m/s}^2}{152.44\text{ s}^{-2}} \approx 0.0270\text{ m}.

Final answer

Amax=0.0270 mA_{\text{max}} = 0.0270\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw a free-body diagram of the combined system to see why the spring force accelerates Mb+mcM_b + m_c.

  • Practice distinguishing between the force that drives the entire system (spring force on total mass) and the internal force that accelerates an individual component (static friction on the top object).

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly uses total mass instead of the coin's mass in the friction-force balance, leading to a_max = μ_s m_c g / (M_b + m_c).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    mtot=Mb+mc=0.800+0.0200=0.820 kgm_{\text{tot}} = M_b + m_c = 0.800 + 0.0200 = 0.820\text{ kg}

  2. Step 2

    fs,max=μsmcg=0.420×0.0200×9.80=0.08232 Nf_{s,\text{max}} = \mu_s m_c g = 0.420 \times 0.0200 \times 9.80 = 0.08232\text{ N}

  3. Step 3

    mtotamax=fs,max  ⟹  amax=0.082320.820=0.1004 m/s2m_{\text{tot}} a_{\text{max}} = f_{s,\text{max}} \implies a_{\text{max}} = \frac{0.08232}{0.820} = 0.1004\text{ m/s}^2

    Correct

    mcamax=fs,max  ⟹  amax=μsg=0.420×9.80 m/s2=4.116 m/s2m_c a_{\text{max}} = f_{s,\text{max}} \implies a_{\text{max}} = \mu_s g = 0.420 \times 9.80\text{ m/s}^2 = 4.116\text{ m/s}^2

    Static friction acts directly on the coin alone to accelerate it, not on the entire system of mass mtotm_{\text{tot}}. Applying ΣF=ma\Sigma F = m a to the free-body diagram of the coin gives fs=mcaf_s = m_c a, so amax=μsga_{\text{max}} = \mu_s g.

  4. Step 4

    ω2=kmtot=1250.820=152.44 rad2/s2\omega^2 = \frac{k}{m_{\text{tot}}} = \frac{125}{0.820} = 152.44\text{ rad}^2/\text{s}^2

  5. Step 5

    Amax=amaxω2=0.1004152.44=0.000659 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{0.1004}{152.44} = 0.000659\text{ m}

    Correct

    Amax=amaxω2=4.116 m/s2152.44 s−2≈0.0270 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116\text{ m/s}^2}{152.44\text{ s}^{-2}} \approx 0.0270\text{ m}

    Your relationship Amax=amaxω2A_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} is correct, but the numerical result is affected by the incorrect value of amaxa_{\text{max}} from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the block and coin oscillate together with a combined mass of 0.820 kg0.820\text{ kg}.

You accurately determined the maximum available static friction using the normal force on the coin.

You used the correct relation between amplitude and maximum acceleration in simple harmonic motion, amax=ω2Aa_{\text{max}} = \omega^2 A.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
System boundary confusion in Newton's second law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the total combined mass mtotm_{\text{tot}} instead of the coin's mass mcm_c when setting up Newton's second law for the horizontal motion of the coin. The static friction force is an internal force between the block and the coin, so it only accelerates the coin of mass mcm_c.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the Subsystem
  • When finding the condition for an object resting on a moving surface to not slip, draw the free-body diagram for that specific resting object alone.

  • Set ΣFx=mobjecta\Sigma F_x = m_{\text{object}} a, matching the force with the mass of that specific body.

Recognize Internal vs. External Forces
  • Friction between two stacked bodies is an internal force for the combined system; it cannot accelerate the combined system.

  • Use the external force (here, the spring force) for the total mass, and the contact friction force only for the mass riding on top.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Newton's second law horizontally to the coin alone: fs,max=mcamaxf_{s,\text{max}} = m_c a_{\text{max}}.

  2. Substitute fs,max=μsmcgf_{s,\text{max}} = \mu_s m_c g: mcamax=μsmcg  ⟹  amax=μsg=0.420×9.80 m/s2=4.116 m/s2m_c a_{\text{max}} = \mu_s m_c g \implies a_{\text{max}} = \mu_s g = 0.420 \times 9.80\text{ m/s}^2 = 4.116\text{ m/s}^2.

  3. Use the relationship between maximum acceleration and amplitude: Amax=amaxω2=4.116 m/s2152.44 s−2≈0.0270 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.116\text{ m/s}^2}{152.44\text{ s}^{-2}} \approx 0.0270\text{ m}.

Final answer

Amax=0.0270 mA_{\text{max}} = 0.0270\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw an isolated free-body diagram for the coin to verify which mass is being accelerated by the static friction force.

  • Notice that the coin's maximum non-slip acceleration simplifies to amax=μsga_{\text{max}} = \mu_s g, which is independent of the coin's mass.

  • Recompute Amax=μsgω2=μsg(Mb+mc)kA_{\text{max}} = \frac{\mu_s g}{\omega^2} = \frac{\mu_s g (M_b + m_c)}{k} to obtain the correct value of 0.0270 m0.0270\text{ m}.

Lock it in

Similar question

01

A flat plate of mass M=1.80 kgM = 1.80\text{ kg} is attached to a horizontal spring of constant k=200 N/mk = 200\text{ N/m}. A small eraser of mass m=0.20 kgm = 0.20\text{ kg} rests on the plate. The coefficient of static friction is μs=0.500\mu_s = 0.500. Find the maximum oscillation amplitude AmaxA_{\text{max}} without the eraser slipping (use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

The combined mass is Mtotal=1.80 kg+0.20 kg=2.00 kgM_{\text{total}} = 1.80\text{ kg} + 0.20\text{ kg} = 2.00\text{ kg}. The angular frequency squared is ω2=kMtotal=2002.00=100 rad2/s2\omega^2 = \frac{k}{M_{\text{total}}} = \frac{200}{2.00} = 100\text{ rad}^2/\text{s}^2. To prevent slipping, amax≤μsg=0.500×9.80=4.90 m/s2a_{\text{max}} \le \mu_s g = 0.500 \times 9.80 = 4.90\text{ m/s}^2. Thus, Amax=amaxω2=4.90100=0.0490 mA_{\text{max}} = \frac{a_{\text{max}}}{\omega^2} = \frac{4.90}{100} = 0.0490\text{ m}.

02

A block of mass M=0.500 kgM = 0.500\text{ kg} attached to a horizontal spring (k=80.0 N/mk = 80.0\text{ N/m}) oscillates with an amplitude of 0.0500 m0.0500\text{ m}. A coin rests on the block. Determine the minimum coefficient of static friction μs,min\mu_{s,\text{min}} required so that a very light coin of negligible mass (m≪Mm \ll M) does not slip (use g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer

Because the coin's mass is negligible, Mtotal≈M=0.500 kgM_{\text{total}} \approx M = 0.500\text{ kg}, so ω2=80.00.500=160 rad2/s2\omega^2 = \frac{80.0}{0.500} = 160\text{ rad}^2/\text{s}^2. The peak acceleration is amax=ω2A=160×0.0500=8.00 m/s2a_{\text{max}} = \omega^2 A = 160 \times 0.0500 = 8.00\text{ m/s}^2. To avoid slipping, μsg≥amax\mu_s g \ge a_{\text{max}}, giving μs,min=8.009.80≈0.816\mu_{s,\text{min}} = \frac{8.00}{9.80} \approx 0.816.

03

A vertical spring of stiffness k=150 N/mk = 150\text{ N/m} supports a pan of mass M=1.20 kgM = 1.20\text{ kg}. A small block of mass m=0.30 kgm = 0.30\text{ kg} rests on the pan. The system oscillates vertically. What is the maximum amplitude AmaxA_{\text{max}} such that the small block remains in contact with the pan at all times (use g=9.80 m/s2g = 9.80\text{ m/s}^2)?

Answer

The combined mass is Mtotal=1.20 kg+0.30 kg=1.50 kgM_{\text{total}} = 1.20\text{ kg} + 0.30\text{ kg} = 1.50\text{ kg}, yielding ω2=kMtotal=1501.50=100 rad2/s2\omega^2 = \frac{k}{M_{\text{total}}} = \frac{150}{1.50} = 100\text{ rad}^2/\text{s}^2. At the highest point of vertical SHM, the downward acceleration must satisfy amax=ω2A≤ga_{\text{max}} = \omega^2 A \le g so normal force does not drop below zero. Therefore, Amax=gω2=9.80100=0.0980 mA_{\text{max}} = \frac{g}{\omega^2} = \frac{9.80}{100} = 0.0980\text{ m}.

Loading workspace…