Resources

A delicate ohmic circuit component has a nominal resistance of R=68.0 ΩR = 68.0\,\Omega and a strict manufacturer maximum continuous power rating of Pmax⁡=0.500 WP_{\max} = 0.500\text{ W}. Exceeding this rating causes irreversible thermal breakdown. Applying Ohm's law (V=IRV = IR) alongside the electric power relationship (P=IVP = IV), determine the critical threshold voltage VcritV_{\text{crit}} that represents the absolute maximum potential difference that can safely be applied across this resistor without exceeding its power dissipation limit.

Answer and steps

Final answer

5.83 V5.83\text{ V}

Steps

01

Relate electric power, voltage, and resistance

Electric power PP dissipated in a resistive component is defined by the product of current II and potential difference VV: P=IVP = I V

According to Ohm's law, the current flowing through an ohmic component is related to the applied voltage and resistance RR by: I=VRI = \frac{V}{R}

Substitute this expression for II into the power formula to express power directly in terms of voltage and resistance: P=(VR)V=V2RP = \left(\frac{V}{R}\right) V = \frac{V^2}{R}


02

Solve for the critical threshold voltage

To prevent exceeding the maximum continuous power rating Pmax⁡P_{\max}, the applied voltage must not exceed a critical threshold VcritV_{\text{crit}}: Pmax⁡=Vcrit2RP_{\max} = \frac{V_{\text{crit}}^2}{R}

Rearrange the equation to isolate VcritV_{\text{crit}}: Vcrit2=Pmax⁡⋅RV_{\text{crit}}^2 = P_{\max} \cdot R Vcrit=Pmax⁡⋅RV_{\text{crit}} = \sqrt{P_{\max} \cdot R}


03

Substitute the given values and calculate

Substitute the given values, R=68.0 ΩR = 68.0\text{ }\Omega and Pmax⁡=0.500 WP_{\max} = 0.500\text{ W}: Vcrit=0.500 W⋅68.0 ΩV_{\text{crit}} = \sqrt{0.500\text{ W} \cdot 68.0\text{ }\Omega} Vcrit=34.0 V2≈5.83095 VV_{\text{crit}} = \sqrt{34.0\text{ V}^2} \approx 5.83095\text{ V}

Rounding to three significant figures gives: Vcrit≈5.83 VV_{\text{crit}} \approx 5.83\text{ V}


Common Pitfall to Avoid

A frequent error is calculating the maximum current first via P=I2RP = I^2 R and multiplying by RR, but rounding intermediate values too early (such as rounding Imax⁡=0.500/68.0≈0.0857 AI_{\max} = \sqrt{0.500/68.0} \approx 0.0857\text{ A} to two significant digits). Always maintain full precision through intermediate steps or use the direct formula V=P⋅RV = \sqrt{P \cdot R} to avoid rounding errors.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to take the square root when solving for voltage from P = V²/R, leaving V_crit equal to V².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=V2R  ⟹  V2=P⋅RP = \frac{V^2}{R} \implies V^2 = P \cdot R

  2. Step 2

    V2=0.500⋅68.0=34.0V^2 = 0.500 \cdot 68.0 = 34.0

  3. Step 3

    Vcrit=34.0 VV_{\text{crit}} = 34.0\text{ V}

    Correct

    Vcrit=34.0≈5.83 VV_{\text{crit}} = \sqrt{34.0} \approx 5.83\text{ V}

    You equated VcritV_{\text{crit}} directly to V2V^2 instead of taking the square root of 34.0 V234.0\text{ V}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly chose the electric power formula P=V2RP = \frac{V^2}{R} connecting voltage, power, and resistance.

You accurately rearranged the formula to isolate the squared term V2=P⋅RV^2 = P \cdot R.

You substituted the given values and performed the multiplication 0.500×68.0=34.00.500 \times 68.0 = 34.0 without arithmetic error.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square root when solving for voltage

You evaluated V2=34.0V^2 = 34.0 correctly, but then dropped the exponent without taking the square root of the right-hand side.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Dropping the exponent when transitioning from an intermediate expression for a squared variable (V2V^2) to the linear quantity (VV), confusing the squared potential difference with the actual voltage.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate the base variable completely
  • When a variable is raised to a power in an equation (x2=kx^2 = k), solving for xx requires taking the root: x=kx = \sqrt{k}.

  • Write V=P⋅RV = \sqrt{P \cdot R} explicitly before substituting numbers so the square root operation is not overlooked.

Verify dimensional units
  • The product of power and resistance has units of W⋅Ω=V2\text{W} \cdot \Omega = \text{V}^2, not V\text{V}.

  • Check that your intermediate quantity has units of squared volts, reminding you that a square root is necessary to obtain volts.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Take the square root of both sides: Vcrit=34.0 V2V_{\text{crit}} = \sqrt{34.0\text{ V}^2}.

  2. Evaluate the numerical square root: 34.0≈5.83095 V\sqrt{34.0} \approx 5.83095\text{ V}.

  3. Round to three significant figures to match the given data (68.0 Ω68.0\text{ }\Omega, 0.500 W0.500\text{ W}): Vcrit=5.83 VV_{\text{crit}} = 5.83\text{ V}.

Final answer

5.83 V5.83\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write the fully isolated formula V=P⋅RV = \sqrt{P \cdot R} as a standalone algebraic step before entering numbers into your calculator.

  • Track units during intermediate calculations to catch squared quantities before writing your final answer.

OverviewACEpath Teacher's Diagnosis

02 The student misremembers or incorrectly derives the power formula as P = V/R instead of P = V²/R, omitting the square on potential difference.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=V/R  ⟹  V=P⋅RP = V/R \implies V = P \cdot R

    Correct

    P=V2R  ⟹  V=P⋅RP = \frac{V^2}{R} \implies V = \sqrt{P \cdot R}

    You wrote the power formula as P=V/RP = V/R, but from Ohm's law (I=V/RI = V/R) and the definition of power (P=IVP = IV), substituting II yields P=(V/R)V=V2/RP = (V/R)V = V^2/R.

  2. Step 2

    Vcrit=0.500 W⋅68.0 Ω  ⟹  Vcrit=34.0 VV_{\text{crit}} = 0.500\text{ W} \cdot 68.0\text{ }\Omega \implies V_{\text{crit}} = 34.0\text{ V}

    Correct

    Vcrit=0.500 W⋅68.0 Ω=34.0 V2≈5.83 VV_{\text{crit}} = \sqrt{0.500\text{ W} \cdot 68.0\text{ }\Omega} = \sqrt{34.0\text{ V}^2} \approx 5.83\text{ V}

    Your arithmetic multiplication was carried out correctly according to your rearranged equation, but the result is incorrect because it inherited the missing square and square-root operations from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized the need to express the relationship connecting power, resistance, and voltage.

You accurately executed the arithmetic product of the given numerical values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused current (I=V/RI = V/R) with power (P=V2/RP = V^2/R), omitting the square on potential difference in the power-resistance relationship.

REASONING PATH
Your ACEpath teacher’s suggested approach
Deriving Dissipated Power from Ohm's Law
  • Electric power is P=IVP = IV. Since I=VRI = \frac{V}{R}, substituting gives P=(VR)V=V2RP = \left(\frac{V}{R}\right)V = \frac{V^2}{R}.

  • Always check the units: [V]/[R]=A[V]/[R] = \text{A} (current), whereas [V]2/[R]=V2/Ω=W[V]^2/[R] = \text{V}^2/\Omega = \text{W} (power).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that P=IVP = IV and I=VRI = \frac{V}{R}, which combine to give P=V2RP = \frac{V^2}{R}.

  2. Rearrange to isolate VcritV_{\text{crit}}: Vcrit2=Pmax⁡⋅R  ⟹  Vcrit=Pmax⁡⋅RV_{\text{crit}}^2 = P_{\max} \cdot R \implies V_{\text{crit}} = \sqrt{P_{\max} \cdot R}.

  3. Substitute the given values: Vcrit=0.500 W⋅68.0 Ω=34.0 V2≈5.83 VV_{\text{crit}} = \sqrt{0.500\text{ W} \cdot 68.0\text{ }\Omega} = \sqrt{34.0\text{ V}^2} \approx 5.83\text{ V}.

Final answer

5.83 V5.83\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the three algebraic forms of the electric power equation: P=IVP = IV, P=I2RP = I^2 R, and P=V2RP = \frac{V^2}{R}.

  • Practice dimensional checks to confirm that the units on both sides of a derived formula match before substituting numbers.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly rearranges P = V²/R by dividing power by resistance instead of multiplying, giving V² = P/R.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    P=V2RP = \frac{V^2}{R}

  2. Step 2

    V2=PRV^2 = \frac{P}{R}

    Correct

    V2=P⋅RV^2 = P \cdot R

    To isolate V2V^2 from P=V2RP = \frac{V^2}{R}, you must multiply both sides by RR, which gives V2=P⋅RV^2 = P \cdot R rather than V2=PRV^2 = \frac{P}{R}.

  3. Step 3

    V2=0.50068.0≈0.00735  ⟹  Vcrit=0.00735≈0.0857 VV^2 = \frac{0.500}{68.0} \approx 0.00735 \implies V_{\text{crit}} = \sqrt{0.00735} \approx 0.0857\text{ V}

    Correct

    Vcrit=Pmax⁡⋅R=0.500⋅68.0=34.0≈5.83 VV_{\text{crit}} = \sqrt{P_{\max} \cdot R} = \sqrt{0.500 \cdot 68.0} = \sqrt{34.0} \approx 5.83\text{ V}

    Your numerical substitution and square root calculation were carried out consistently with your formula, but the result is incorrect due to the rearrangement error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and stated the relationship P=V2RP = \frac{V^2}{R}.

You correctly substituted your values and solved for the variable by taking the square root.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement error

Dividing by resistance instead of multiplying when clearing the denominator in P=V2RP = \frac{V^2}{R}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the denominator RR as if it were a multiplying factor of V2V^2, dividing PP by RR rather than clearing the fraction by multiplying both sides by RR.

REASONING PATH
Your ACEpath teacher’s suggested approach
Clear Denominators Using Inverse Operations
  • When a target variable is divided by a quantity (y=xay = \frac{x}{a}), undo the division by multiplying both sides by that quantity (x=y⋅ax = y \cdot a).

  • Multiply both sides of P=V2RP = \frac{V^2}{R} by RR before taking the square root.

Perform a Dimensional / Unit Sanity Check
  • The product of power and resistance has units of W⋅Ω=(V2Ω)⋅Ω=V2\text{W} \cdot \Omega = \left(\frac{\text{V}^2}{\Omega}\right) \cdot \Omega = \text{V}^2.

  • Verify that PR\frac{P}{R} yields WΩ=A2\frac{\text{W}}{\Omega} = \text{A}^2 (which corresponds to I2I^2, not V2V^2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by RR: Vcrit2=Pmax⁡⋅RV_{\text{crit}}^2 = P_{\max} \cdot R.

  2. Take the principal square root of both sides: Vcrit=Pmax⁡⋅RV_{\text{crit}} = \sqrt{P_{\max} \cdot R}.

  3. Substitute the given parameters: Vcrit=0.500 W⋅68.0 Ω=34.0 V2≈5.83 VV_{\text{crit}} = \sqrt{0.500\text{ W} \cdot 68.0\text{ }\Omega} = \sqrt{34.0\text{ V}^2} \approx 5.83\text{ V}.

Final answer

5.83 V5.83\text{ V}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables that appear in numerators of fractions.

  • Use unit analysis after rearranging formulas to confirm that the isolated quantity has the expected physical dimensions.

Lock it in

Similar question

01

A 120 Ω120\text{ }\Omega resistor has a maximum safe power dissipation of 0.300 W0.300\text{ W}. Calculate the maximum voltage Vmax⁡V_{\max} that can be applied across it.

Answer

Vmax⁡=6.00 VV_{\max} = 6.00\text{ V}. Key steps: P=V2R  ⟹  V=P⋅R=0.300×120=36.0=6.00 VP = \frac{V^2}{R} \implies V = \sqrt{P \cdot R} = \sqrt{0.300 \times 120} = \sqrt{36.0} = 6.00\text{ V}.

02

A sensitive measurement circuit uses a 2.20 kΩ2.20\text{ k}\Omega resistor rated for up to 0.250 W0.250\text{ W}. Determine the critical threshold voltage VcritV_{\text{crit}} to three significant figures.

Answer

Vcrit=23.5 VV_{\text{crit}} = 23.5\text{ V}. Key steps: Convert R=2.20 kΩ=2200 ΩR = 2.20\text{ k}\Omega = 2200\text{ }\Omega. Then Vcrit=P⋅R=0.250×2200=550≈23.452 V≈23.5 VV_{\text{crit}} = \sqrt{P \cdot R} = \sqrt{0.250 \times 2200} = \sqrt{550} \approx 23.452\text{ V} \approx 23.5\text{ V}.

03

An LED indicator is in series with a current-limiting resistor of R=470 ΩR = 470\text{ }\Omega rated at 0.125 W0.125\text{ W}. If the total power dissipated across the resistor must not exceed 80.0%80.0\% of its rated maximum, find the maximum allowable potential difference across this resistor.

Answer

Vmax⁡=6.86 VV_{\max} = 6.86\text{ V}. Key steps: Allowable power Pallow=0.800×0.125 W=0.100 WP_{\text{allow}} = 0.800 \times 0.125\text{ W} = 0.100\text{ W}. Calculate voltage: Vmax⁡=Pallow⋅R=0.100×470=47.0≈6.8557 V≈6.86 VV_{\max} = \sqrt{P_{\text{allow}} \cdot R} = \sqrt{0.100 \times 470} = \sqrt{47.0} \approx 6.8557\text{ V} \approx 6.86\text{ V}.

Loading workspace…