Resources

An ideal gas undergoes a closed cyclic thermodynamic process A→B→C→D→AA \to B \to C \to D \to A on a P-VP\text{-}V indicator diagram. Process A→BA \to B is an isobaric expansion at P1=3.00×105 PaP_1 = 3.00 \times 10^5\text{ Pa} from VA=1.00×10−3 m3V_A = 1.00 \times 10^{-3}\text{ m}^3 to VB=4.00×10−3 m3V_B = 4.00 \times 10^{-3}\text{ m}^3. Process B→CB \to C is an isochoric depressurization to P2=1.00×105 PaP_2 = 1.00 \times 10^5\text{ Pa}. Process C→DC \to D is an isobaric compression at P2=1.00×105 PaP_2 = 1.00 \times 10^5\text{ Pa} back to VD=1.00×10−3 m3V_D = 1.00 \times 10^{-3}\text{ m}^3. Process D→AD \to A is an isochoric repressurization back to the initial state AA. For one complete cycle: (a) what is the net change in internal energy ΔUcycle\Delta U_{\text{cycle}}, (b) what is the net work done by the gas WnetW_{\text{net}}, and (c) what is the net heat absorbed by the gas QnetQ_{\text{net}}?

Answer and steps

Final answer

(a) ΔUcycle=0 J\Delta U_{\text{cycle}} = 0\text{ J}; (b) Wnet=600 JW_{\text{net}} = 600\text{ J}; (c) Qnet=600 JQ_{\text{net}} = 600\text{ J}.

Steps

Part (a): Net Change in Internal Energy ΔUcycle\Delta U_{\text{cycle}}

Internal energy UU is a state function, meaning its value depends solely on the current thermodynamic state of the gas (its temperature, pressure, and volume) rather than the path taken to reach that state.

Because the gas completes a full cycle (A→B→C→D→AA \to B \to C \to D \to A) and returns to its initial state AA: ΔUcycle=UA−UA=0 J\Delta U_{\text{cycle}} = U_A - U_A = 0\text{ J}


Part (b): Net Work Done by the Gas WnetW_{\text{net}}

On a pressure-volume (P-VP\text{-}V) diagram, the work done during any process is given by the integral: W=∫P dVW = \int P\, dV

For a closed cycle, the net work done equals the enclosed area inside the cycle path. If traversed clockwise, the net work is positive:

  1. Calculate work for individual stages:

    • A→BA \to B (Isobaric expansion): WAB=P1(VB−VA)=(3.00×105 Pa)(4.00×10−3 m3−1.00×10−3 m3)=600 JW_{AB} = P_1(V_B - V_A) = (3.00 \times 10^5\text{ Pa})(4.00 \times 10^{-3}\text{ m}^3 - 1.00 \times 10^{-3}\text{ m}^3) = 600\text{ J}
    • B→CB \to C (Isochoric cooling): Since dV=0dV = 0, WBC=0 JW_{BC} = 0\text{ J}
    • C→DC \to D (Isobaric compression): WCD=P2(VD−VC)=(1.00×105 Pa)(1.00×10−3 m3−4.00×10−3 m3)=−300 JW_{CD} = P_2(V_D - V_C) = (1.00 \times 10^5\text{ Pa})(1.00 \times 10^{-3}\text{ m}^3 - 4.00 \times 10^{-3}\text{ m}^3) = -300\text{ J}
    • D→AD \to A (Isochoric heating): Since dV=0dV = 0, WDA=0 JW_{DA} = 0\text{ J}
  2. Sum the work contributions: Wnet=WAB+WBC+WCD+WDA=600 J+0 J+(−300 J)+0 J=300 J— Wait!W_{\text{net}} = W_{AB} + W_{BC} + W_{CD} + W_{DA} = 600\text{ J} + 0\text{ J} + (-300\text{ J}) + 0\text{ J} = 300\text{ J} \quad \text{--- Wait!}

Let's re-multiply carefully: WAB=3.00×105×3.00×10−3=900 JW_{AB} = 3.00 \times 10^5 \times 3.00 \times 10^{-3} = 900\text{ J} WCD=1.00×105×(−3.00×10−3)=−300 JW_{CD} = 1.00 \times 10^5 \times (-3.00 \times 10^{-3}) = -300\text{ J} Wnet=900 J−300 J=600 JW_{\text{net}} = 900\text{ J} - 300\text{ J} = 600\text{ J}

Alternatively, using the area of the rectangle directly: Wnet=(P1−P2)(VB−VA)W_{\text{net}} = (P_1 - P_2)(V_B - V_A) Wnet=(3.00×105 Pa−1.00×105 Pa)×(4.00×10−3 m3−1.00×10−3 m3)W_{\text{net}} = (3.00 \times 10^5\text{ Pa} - 1.00 \times 10^5\text{ Pa}) \times (4.00 \times 10^{-3}\text{ m}^3 - 1.00 \times 10^{-3}\text{ m}^3) Wnet=(2.00×105 Pa)(3.00×10−3 m3)=600 JW_{\text{net}} = (2.00 \times 10^5\text{ Pa})(3.00 \times 10^{-3}\text{ m}^3) = 600\text{ J}


Part (c): Net Heat Absorbed by the Gas QnetQ_{\text{net}}

According to the First Law of Thermodynamics: Qnet=ΔUcycle+WnetQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}}

Substitute the values found in parts (a) and (b): Qnet=0 J+600 J=600 JQ_{\text{net}} = 0\text{ J} + 600\text{ J} = 600\text{ J}

Because Qnet>0Q_{\text{net}} > 0, the gas absorbs a net amount of 600 J600\text{ J} of heat over the complete cycle.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates work only for the forward expansion step A → B and ignores the work done on the gas during the compression step C → D.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔUcycle=0 J\Delta U_{\text{cycle}} = 0\text{ J} because the cycle returns to initial state A.

  2. Step 2

    Wnet=P1(VB−VA)=(3.00×105)(4.00×10−3−1.00×10−3)=900 JW_{\text{net}} = P_1(V_B - V_A) = (3.00 \times 10^5)(4.00 \times 10^{-3} - 1.00 \times 10^{-3}) = 900\text{ J}

    Correct

    Wnet=(P1−P2)(VB−VA)=(3.00×105 Pa−1.00×105 Pa)(4.00×10−3 m3−1.00×10−3 m3)=600 JW_{\text{net}} = (P_1 - P_2)(V_B - V_A) = (3.00 \times 10^5\text{ Pa} - 1.00 \times 10^5\text{ Pa})(4.00 \times 10^{-3}\text{ m}^3 - 1.00 \times 10^{-3}\text{ m}^3) = 600\text{ J}

    You calculated only the expansion work along path A→BA \to B. A complete cycle includes the compression work along path C→DC \to D, where WCD=P2(VD−VC)=−300 JW_{CD} = P_2(V_D - V_C) = -300\text{ J}, yielding a net work equal to the enclosed rectangular area of 600 J600\text{ J}.

  3. Step 3

    Qnet=ΔUcycle+Wnet  ⟹  Qnet=0+900=900 JQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} \implies Q_{\text{net}} = 0 + 900 = 900\text{ J}

    Correct

    Qnet=ΔUcycle+Wnet=0 J+600 J=600 JQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} = 0\text{ J} + 600\text{ J} = 600\text{ J}

    You applied the First Law equation correctly, but your final numerical answer inherits the error from the net work calculation in part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the net internal energy change for a closed cycle is zero.

You stated and applied the First Law of Thermodynamics relation Qnet=ΔUcycle+WnetQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} correctly.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of compression work in cyclic process

You set the net work of the entire cycle equal to the work of the top isobaric expansion leg alone.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated net cyclic work as the area under the top curve rather than the closed area enclosed by the entire cycle loop (expansion area minus compression area).

REASONING PATH
Your ACEpath teacher’s suggested approach
Net Work as Enclosed Area
  • For a closed loop on a P-VP\text{-}V diagram, Wnet=∮P dVW_{\text{net}} = \oint P\,dV, which equals the area enclosed inside the loop (positive if clockwise, negative if counterclockwise).

  • Always subtract the work done on the gas during compression legs from the work done by the gas during expansion legs, or directly compute the enclosed geometric area.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Wnet=WAB+WBC+WCD+WDA=900 J+0 J+(1.00×105)(1.00×10−3−4.00×10−3) J+0 J=900 J−300 J=600 JW_{\text{net}} = W_{AB} + W_{BC} + W_{CD} + W_{DA} = 900\text{ J} + 0\text{ J} + (1.00 \times 10^5)(1.00 \times 10^{-3} - 4.00 \times 10^{-3})\text{ J} + 0\text{ J} = 900\text{ J} - 300\text{ J} = 600\text{ J}

  2. Qnet=ΔUcycle+Wnet=0 J+600 J=600 JQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} = 0\text{ J} + 600\text{ J} = 600\text{ J}

Final answer

(a) ΔUcycle=0 J\Delta U_{\text{cycle}} = 0\text{ J}; (b) Wnet=600 JW_{\text{net}} = 600\text{ J}; (c) Qnet=600 JQ_{\text{net}} = 600\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Sketch the complete closed loop on a P-VP\text{-}V graph before writing equations.

  • Check whether every process leg with non-zero volume change is included in the net work summation.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets the cyclic process as having net zero heat exchange by confusing net heat with the state function internal energy.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔUcycle=0 J\Delta U_{\text{cycle}} = 0\text{ J}

  2. Step 2

    Wnet=(P1−P2)(VB−VA)  ⟹  Wnet=(2.00×105)(3.00×10−3)=600 JW_{\text{net}} = (P_1 - P_2)(V_B - V_A) \implies W_{\text{net}} = (2.00 \times 10^5)(3.00 \times 10^{-3}) = 600\text{ J}

  3. Step 3

    Q is zero for a full closed cycle.  ⟹  Qnet=0 JQ\text{ is zero for a full closed cycle.} \implies Q_{\text{net}} = 0\text{ J}

    Correct

    Qnet=ΔUcycle+Wnet=0 J+600 J=600 JQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} = 0\text{ J} + 600\text{ J} = 600\text{ J}

    Heat QQ is a path-dependent process quantity rather than a state function, so it does not generally vanish over a closed cycle. Applying the First Law of Thermodynamics gives Qnet=ΔUcycle+Wnet=600 JQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} = 600\text{ J}.

WHAT YOU DID WELL
Compliments from Your Teacher

You identified that the net change in internal energy for any closed cycle is zero.

You correctly calculated the net work done using the area enclosed by the rectangular loop on the pressure-volume diagram.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing path functions with state functions

You treated heat exchange as a state function that returns to zero after a complete thermodynamic loop.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Heat (QQ) and work (WW) describe energy in transit along a specific path, unlike internal energy (UU), which depends solely on the state. For a complete cycle, ΔU=0\Delta U = 0, which requires Qnet=WnetQ_{\text{net}} = W_{\text{net}} according to the First Law of Thermodynamics.

REASONING PATH
Your ACEpath teacher’s suggested approach
First Law for a Closed Cycle
  • For any complete cycle, ΔUcycle=0\Delta U_{\text{cycle}} = 0, so Qnet=WnetQ_{\text{net}} = W_{\text{net}}.

  • Always find QnetQ_{\text{net}} using Qnet=ΔUcycle+WnetQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} rather than assuming heat is zero.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the First Law of Thermodynamics: Qnet=ΔUcycle+WnetQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}}.

  2. Substitute the known values: ΔUcycle=0 J\Delta U_{\text{cycle}} = 0\text{ J} and Wnet=600 JW_{\text{net}} = 600\text{ J}.

  3. Evaluate the sum: Qnet=0 J+600 J=600 JQ_{\text{net}} = 0\text{ J} + 600\text{ J} = 600\text{ J}.

Final answer

Qnet=600 JQ_{\text{net}} = 600\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between state functions (UU, PP, VV, TT) and path functions (QQ, WW).

  • Practice applying the First Law ΔU=Q−W\Delta U = Q - W (or Q=ΔU+WQ = \Delta U + W) to cyclic heat engines and refrigerators.

OverviewACEpath Teacher's Diagnosis

03 The student reverses the sign convention in the first law of thermodynamics by writing Q = ΔU - W instead of Q = ΔU + W.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔUcycle=0 J\Delta U_{\text{cycle}} = 0\text{ J}

  2. Step 2

    Wnet=(3.00×105−1.00×105)(4.00×10−3−1.00×10−3)  ⟹  Wnet=(2.00×105)(3.00×10−3)=600 JW_{\text{net}} = (3.00 \times 10^5 - 1.00 \times 10^5)(4.00 \times 10^{-3} - 1.00 \times 10^{-3}) \implies W_{\text{net}} = (2.00 \times 10^5)(3.00 \times 10^{-3}) = 600\text{ J}

  3. Step 3

    Qnet=ΔUcycle−Wnet  ⟹  Qnet=0−600=−600 JQ_{\text{net}} = \Delta U_{\text{cycle}} - W_{\text{net}} \implies Q_{\text{net}} = 0 - 600 = -600\text{ J}

    Correct

    Qnet=ΔUcycle+Wnet=0+600=600 JQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}} = 0 + 600 = 600\text{ J}

    When WW represents the work done by the gas, the First Law of Thermodynamics states ΔU=Q−W\Delta U = Q - W. Solving for heat gives Q=ΔU+WQ = \Delta U + W, not ΔU−W\Delta U - W.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the net change in internal energy over a closed thermodynamic cycle is zero.

You used the area enclosed by the clockwise cycle on the P-V diagram to find the net work done.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in First Law of Thermodynamics

You accidentally rearranged ΔU=Q−W\Delta U = Q - W with an incorrect sign as Q=ΔU−WQ = \Delta U - W.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion regarding the sign convention of work in the First Law of Thermodynamics: when WW is defined as work done by the system, energy leaving as work requires heat input to balance it, giving Q=ΔU+WQ = \Delta U + W.

REASONING PATH
Your ACEpath teacher’s suggested approach
State the standard First Law equation
  • When WW is work done by the gas, conservation of energy gives ΔU=Q−W\Delta U = Q - W.

  • Write down ΔU=Q−W\Delta U = Q - W before rearranging terms.

Rearrange for heat transfer
  • Add WW to both sides: Q=ΔU+WQ = \Delta U + W.

  • Ensure the work done by the gas adds to the internal energy change to yield the total heat added.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the First Law of Thermodynamics: ΔUcycle=Qnet−Wnet\Delta U_{\text{cycle}} = Q_{\text{net}} - W_{\text{net}}.

  2. Rearrange to solve for heat: Qnet=ΔUcycle+WnetQ_{\text{net}} = \Delta U_{\text{cycle}} + W_{\text{net}}.

  3. Substitute known values: Qnet=0 J+600 J=600 JQ_{\text{net}} = 0\text{ J} + 600\text{ J} = 600\text{ J}.

Final answer

Qnet=600 JQ_{\text{net}} = 600\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rearranging ΔU=Q−W\Delta U = Q - W for each variable (Q=ΔU+WQ = \Delta U + W and W=Q−ΔUW = Q - \Delta U) to reinforce algebraic sign habits.

  • Always perform an energy-accounting sanity check: if the gas does positive net work over a cycle with zero net energy change, it must take in positive net heat from an external source.

Lock it in

Similar question

01

An ideal gas undergoes a clockwise rectangular cycle on a P-VP\text{-}V diagram between pressures P1=4.0×105 PaP_1 = 4.0 \times 10^5\text{ Pa} and P2=2.0×105 PaP_2 = 2.0 \times 10^5\text{ Pa}, and volumes V1=2.0×10−3 m3V_1 = 2.0 \times 10^{-3}\text{ m}^3 and V2=5.0×10−3 m3V_2 = 5.0 \times 10^{-3}\text{ m}^3. Find the net work done by the gas in one complete cycle.

Answer

Wnet=600 JW_{\text{net}} = 600\text{ J}. Work equals the enclosed area: Wnet=(P1−P2)(V2−V1)=(2.0×105 Pa)(3.0×10−3 m3)=600 JW_{\text{net}} = (P_1 - P_2)(V_2 - V_1) = (2.0 \times 10^5\text{ Pa})(3.0 \times 10^{-3}\text{ m}^3) = 600\text{ J}.

02

A gas is taken through a cyclic process consisting of three steps: an isobaric expansion from (1.0 m3,3.0×105 Pa)(1.0\text{ m}^3, 3.0\times 10^5\text{ Pa}) to (3.0 m3,3.0×105 Pa)(3.0\text{ m}^3, 3.0\times 10^5\text{ Pa}), an isochoric depressurization to 1.0×105 Pa1.0\times 10^5\text{ Pa}, and a linear return path back to the starting point. Calculate the net heat absorbed by the gas in one cycle.

Answer

Qnet=2.0×105 JQ_{\text{net}} = 2.0 \times 10^5\text{ J}. Over a complete cycle, ΔU=0\Delta U = 0, so Qnet=WnetQ_{\text{net}} = W_{\text{net}}. The enclosed area is a right triangle: Wnet=12×(3.0−1.0) m3×(3.0×105−1.0×105) Pa=2.0×105 JW_{\text{net}} = \frac{1}{2} \times (3.0 - 1.0)\text{ m}^3 \times (3.0\times 10^5 - 1.0\times 10^5)\text{ Pa} = 2.0 \times 10^5\text{ J}.

03

In a cyclic process 1→2→3→11 \to 2 \to 3 \to 1, leg 1→21 \to 2 absorbs 500 J500\text{ J} of heat while expanding, doing 300 J300\text{ J} of work. Leg 2→32 \to 3 is isochoric with 150 J150\text{ J} of heat removed. Leg 3→13 \to 1 compresses the gas back to state 1 with 100 J100\text{ J} of work done on the gas. Find (a) the net work WnetW_{\text{net}} and (b) the heat exchanged Q3→1Q_{3\to 1} during the final leg.

Answer

(a) Wnet=200 JW_{\text{net}} = 200\text{ J}; (b) Q3→1=−150 JQ_{3\to 1} = -150\text{ J}. Step 1: Wnet=W12+W23+W31=300 J+0 J+(−100 J)=200 JW_{\text{net}} = W_{12} + W_{23} + W_{31} = 300\text{ J} + 0\text{ J} + (-100\text{ J}) = 200\text{ J}. Step 2: Since ΔUcycle=0\Delta U_{\text{cycle}} = 0, Qnet=Wnet=200 JQ_{\text{net}} = W_{\text{net}} = 200\text{ J}. Step 3: Qnet=Q12+Q23+Q31  ⟹  200 J=500 J−150 J+Q31Q_{\text{net}} = Q_{12} + Q_{23} + Q_{31} \implies 200\text{ J} = 500\text{ J} - 150\text{ J} + Q_{31}, which yields Q31=−150 JQ_{31} = -150\text{ J}.

Loading workspace…