Resources
A light rigid strut of length connects three small point masses along a straight line aligned with the -axis. Mass is located at , mass is located at , and mass is located at the other end, . Neglecting the mass of the strut, calculate the -coordinate of the center of mass of this three-particle system.
Answer and steps
Final answer
Steps
Definition and Formula
The center of mass for a one-dimensional system of discrete particles is the mass-weighted average of their positions:
Because the strut is described as "light," its mass is negligible and does not contribute to either the total mass or the torque/mass-moment terms.
Identify the Given Values
- Particle 1: at
- Particle 2: at
- Particle 3: at
Calculate Total Mass and Mass Moments
- Total mass ():
- Sum of mass moments ():
Determine
Substitute these values into the center of mass formula:
Common Pitfall: A common mistake is simply averaging the positions: . This simple arithmetic mean treats all masses equally. The true center of mass is pulled toward the heaviest mass (), shifting to , past the geometric midpoint of the rod ().
Typical errors
01 The student calculates the unweighted geometric average of the positions instead of weighting each position by its mass, resulting in 1.07 m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You set up the formula as a simple unweighted arithmetic mean of positions. The center of mass is defined as the mass-weighted average position, .
- Step 2Correct
Your arithmetic correctly evaluated the unweighted sum, but this step is affected by using the unweighted formula from step 1.
- Step 3Correct
Your numerical division is mathematically correct for your substituted expression, but it does not give the true center of mass because the particle masses were omitted.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified the given coordinate values for the three particles.
You performed the addition and division accurately based on the formula you wrote.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the center of mass as a geometric centroid of coordinates by dividing by the number of particles () rather than weighting each coordinate by its mass and dividing by the total system mass ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Weighted Average Definition
The 1D center of mass of discrete particles is .
Always multiply each position by its mass , add those mass moments together, and divide by the sum of all masses.
- Physical Reasonableness Check
Heavier masses pull the center of mass closer to themselves.
Check whether your result shifts toward the heaviest particle ( at ) rather than sitting near the midpoint.
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite the mass-weighted center of mass formula: .
Substitute the given masses and coordinates: .
Compute the numerator (total mass moment) and denominator (total mass): .
02 The student omits the first mass from the total mass denominator because its position is zero, dividing by 6.50 kg instead of 8.00 kg to get 1.78 m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You left out when calculating the total mass. Even though particle 1 is located at , it still has mass and must be included in the total mass denominator.
- Step 4Correct
Your division followed correctly from your previous step, but your result is incorrect because it used instead of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recalled the discrete formula for the center of mass.
You accurately substituted each mass and coordinate into the numerator to find the sum of mass moments.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated a mass located at the coordinate origin () as contributing nothing to the entire system. While in the numerator, the particle still contributes its full inertia to the denominator .
REASONING PATH
Your ACEpath teacher’s suggested approach- Total Mass Accounting
Every physical particle in the system contributes to , regardless of where the coordinate origin is placed.
Count the number of masses given in the problem statement () and verify that your denominator sum contains exactly that many terms before dividing.
CORRECTED PATH
ACEpath Teacher's DemonstrationInclude all three masses in the denominator: .
Divide the correct numerator by the full total mass: .
03 The student uses the relative spacing between adjacent masses instead of coordinates measured from the origin, substituting 1.60 m for x3 to obtain 1.05 m.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You substituted for , which is the distance from to (), instead of the coordinate position measured from the origin ().
- Step 3Correct
Your arithmetic was carried out correctly based on the substituted values, but the final numerical value was affected by the coordinate error in Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou selected the correct weighted-average formula for the center of mass.
You correctly calculated the total mass of the system as .
You correctly substituted the positions of the first two masses at and .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the segment length between particles 2 and 3 rather than the coordinate position from the origin.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the relative distance between consecutive masses () with the position coordinate measured from the reference origin (). Every in must share the exact same reference origin.
REASONING PATH
Your ACEpath teacher’s suggested approach- Consistent Origin
In , all coordinate values must be measured from the same reference origin ().
Before substituting into the mass-moment sum, write out each particle's coordinate from the origin rather than using pairwise distances.
CORRECTED PATH
ACEpath Teacher's DemonstrationIdentify the coordinate position of the third mass from the origin: .
Compute the total mass moment: .
Divide by total mass: .
Lock it in
What is the formula for the center of mass of a set of discrete point masses along the -axis?
. It is the mass-weighted average of the coordinates, not the simple average of positions.
Similar question
Two small spheres are attached to a negligible-mass rod aligned with the -axis. Mass is at and mass is at . Find the coordinate of the center of mass.
Answer
. Key steps: ; ; .
A light beam along the -axis supports three objects: at , at , and at . Determine the location of the center of mass.
Answer
. Key steps: ; ; .
Two point particles of masses and are located at and . A third particle of mass is added such that the entire system balances at . At what coordinate must the third mass be placed?
Answer
. Key steps: Total mass ; total required mass moment ; existing moment = ; missing moment from is ; .