Resources

Newton's universal law of gravitation describes the attractive force FF between two spherical masses m1m_1 and m2m_2 separated by a center-to-center distance rr via F=Gm1m2r2F = G \frac{m_1 m_2}{r^2}. Rather than solving for the unit of force, determine the dimensions and express the gravitational constant GG strictly in terms of fundamental SI base units.

Answer and steps

Final answer

m3⋅kg−1⋅s−2\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2} (or m3kg⋅s2\frac{\text{m}^3}{\text{kg}\cdot\text{s}^2})

Steps

01

Rearrange the formula to isolate GG

To express the gravitational constant GG in fundamental SI base units, we can isolate GG algebraically from the law of gravitation and then break down all derived quantities into their base units.

Newton's law of universal gravitation is: F=Gm1m2r2F = G \frac{m_1 m_2}{r^2}

Multiplying both sides by r2r^2 and dividing by (m1m2)(m_1 m_2) gives: G=F⋅r2m1⋅m2G = \frac{F \cdot r^2}{m_1 \cdot m_2}


02

Express the derived unit of force in SI base units

Force (FF) has the SI derived unit of newtons (N\text{N}). Using Newton's second law, F=m⋅aF = m \cdot a, where mass mm is measured in kilograms (kg\text{kg}) and acceleration aa is measured in meters per second squared (m⋅s−2\text{m}\cdot\text{s}^{-2}): 1 N=1 kg⋅m⋅s−21\text{ N} = 1\text{ kg}\cdot\text{m}\cdot\text{s}^{-2}


03

Substitute the fundamental base units into the expression for GG

Substitute the base units of each variable into the rearranged equation:

  • Force F→kg⋅m⋅s−2F \rightarrow \text{kg}\cdot\text{m}\cdot\text{s}^{-2}
  • Distance squared r2→m2r^2 \rightarrow \text{m}^2
  • Mass product m1⋅m2→kg⋅kg=kg2m_1 \cdot m_2 \rightarrow \text{kg} \cdot \text{kg} = \text{kg}^2

Substituting these units: [G]=(kg⋅m⋅s−2)⋅m2kg2[G] = \frac{(\text{kg}\cdot\text{m}\cdot\text{s}^{-2}) \cdot \text{m}^2}{\text{kg}^2}


04

Simplify the base units

Combine the powers for each base unit:

  • For mass (kg\text{kg}): kg1kg2=kg1−2=kg−1\frac{\text{kg}^1}{\text{kg}^2} = \text{kg}^{1 - 2} = \text{kg}^{-1}
  • For length (m\text{m}): m1⋅m2=m1+2=m3\text{m}^1 \cdot \text{m}^2 = \text{m}^{1 + 2} = \text{m}^3
  • For time (s\text{s}): s−2\text{s}^{-2}

Putting them together: [G]=m3⋅kg−1⋅s−2(or m3kg⋅s2)[G] = \text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2} \quad \left(\text{or } \frac{\text{m}^3}{\text{kg}\cdot\text{s}^2}\right)

Common Pitfall: A frequent mistake is stopping at the derived unit form N⋅m2⋅kg−2\text{N}\cdot\text{m}^2\cdot\text{kg}^{-2}. While this unit is correct in derived terms, the newton (N\text{N}) is not a base unit; it must be fully decomposed into kg⋅m⋅s−2\text{kg}\cdot\text{m}\cdot\text{s}^{-2} to satisfy the requirement of fundamental SI base units.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the distance between the masses is squared in the gravitational formula, leading to incorrect dimensions and base units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F=G⋅m1⋅m2r2  ⟹  G=F⋅rm1⋅m2F = G \cdot \frac{m_1 \cdot m_2}{r^2} \implies G = \frac{F \cdot r}{m_1 \cdot m_2}

    Correct

    G=F⋅r2m1⋅m2G = \frac{F \cdot r^2}{m_1 \cdot m_2}

    When multiplying both sides of Newton's law of gravitation by the denominator to isolate GG, the factor is r2r^2, not rr.

  2. Step 2

    [F]=M⋅L⋅T−2[F] = M \cdot L \cdot T^{-2}

  3. Step 3

    [G]=(M⋅L⋅T−2)⋅LM2=M−1⋅L2⋅T−2[G] = \frac{(M \cdot L \cdot T^{-2}) \cdot L}{M^2} = M^{-1} \cdot L^2 \cdot T^{-2}

    Correct

    [G]=(M⋅L⋅T−2)⋅L2M2=M−1⋅L3⋅T−2[G] = \frac{(M \cdot L \cdot T^{-2}) \cdot L^2}{M^2} = M^{-1} \cdot L^3 \cdot T^{-2}

    Your dimensional substitution followed your rearranged formula correctly, but substituting [r]=L[r] = L instead of [r2]=L2[r^2] = L^2 resulted in L2L^2 instead of L3L^3.

  4. Step 4

    SI base units: (kg⋅ms2)⋅mkg2=m2⋅kg−1⋅s−2\text{SI base units: } \left(\frac{\text{kg}\cdot\text{m}}{\text{s}^2}\right) \cdot \frac{\text{m}}{\text{kg}^2} = \text{m}^2 \cdot \text{kg}^{-1} \cdot \text{s}^{-2}

    Correct

    SI base units: (kg⋅ms2)⋅m2kg2=m3⋅kg−1⋅s−2\text{SI base units: } \left(\frac{\text{kg}\cdot\text{m}}{\text{s}^2}\right) \cdot \frac{\text{m}^2}{\text{kg}^2} = \text{m}^3 \cdot \text{kg}^{-1} \cdot \text{s}^{-2}

    Your unit conversion from dimensions was mathematically consistent with your prior lines, but propagating the missing power of length led to m2\text{m}^2 instead of m3\text{m}^3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled Newton's universal law of gravitation.

You accurately decomposed force into its base dimensions [F]=M⋅L⋅T−2[F] = M \cdot L \cdot T^{-2} and base units kg⋅m⋅s−2\text{kg}\cdot\text{m}\cdot\text{s}^{-2}.

You correctly simplified exponent powers when combining units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted power during algebraic isolation

You accidentally dropped the power of 22 on rr when clearing the denominator, writing F⋅rF \cdot r instead of F⋅r2F \cdot r^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In inverse-square force laws, the distance variable rr carries an exponent of 22. Rushing through algebraic rearrangement without verifying variable powers often causes inverse-square terms to be copied down as linear distances.

REASONING PATH
Your ACEpath teacher’s suggested approach
Preserve Exponents During Inversion
  • If a denominator is rnr^n, multiplying both sides introduces rnr^n to the numerator.

  • Always circle or explicitly write exponents when clearing fractions: F⋅(r2)=G⋅m1⋅m2F \cdot (r^2) = G \cdot m_1 \cdot m_2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Multiply both sides by r2r^2: F⋅r2=G⋅m1⋅m2F \cdot r^2 = G \cdot m_1 \cdot m_2

  2. Divide by m1⋅m2m_1 \cdot m_2: G=F⋅r2m1⋅m2G = \frac{F \cdot r^2}{m_1 \cdot m_2}

  3. Substitute base units: [G]=(kg⋅m⋅s−2)⋅m2kg⋅kg=kg⋅m3⋅s−2kg2[G] = \frac{(\text{kg}\cdot\text{m}\cdot\text{s}^{-2}) \cdot \text{m}^2}{\text{kg} \cdot \text{kg}} = \frac{\text{kg}\cdot\text{m}^3\cdot\text{s}^{-2}}{\text{kg}^2}

  4. Simplify powers of kilograms: kg1−2=kg−1\text{kg}^{1 - 2} = \text{kg}^{-1}

Final answer

m3⋅kg−1⋅s−2\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2} (or m3kg⋅s2\frac{\text{m}^3}{\text{kg}\cdot\text{s}^2})

NEXT STEPS
Final Takeaways from Your Teacher
  • Review Coulomb's law F=kq1q2r2F = k \frac{q_1 q_2}{r^2} and practice isolating kk while keeping track of r2r^2.

  • Perform a quick mental check comparing the dimensions of energy (F⋅rF \cdot r) versus force times distance squared (F⋅r2F \cdot r^2) to verify physical consistency.

OverviewACEpath Teacher's Diagnosis

02 The student misinverts the algebraic rearrangement of the formula, writing G = m₁ · m₂ / (F · r²).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    F=G⋅m1⋅m2r2  ⟹  G=m1⋅m2F⋅r2F = G \cdot \frac{m_1 \cdot m_2}{r^2} \implies G = \frac{m_1 \cdot m_2}{F \cdot r^2}

    Correct

    G=F⋅r2m1⋅m2G = \frac{F \cdot r^2}{m_1 \cdot m_2}

    You inverted the fraction while isolating GG. To clear the denominator, you must multiply both sides by r2r^2, and to isolate GG, you must divide both sides by the product m1⋅m2m_1 \cdot m_2.

  2. Step 2

    [G]=M2(M⋅L⋅T−2)⋅L2=M⋅L−3⋅T2[G] = \frac{M^2}{(M \cdot L \cdot T^{-2}) \cdot L^2} = M \cdot L^{-3} \cdot T^2

    Correct

    [G]=(M⋅L⋅T−2)⋅L2M2=M−1⋅L3⋅T−2[G] = \frac{(M \cdot L \cdot T^{-2}) \cdot L^2}{M^2} = M^{-1} \cdot L^3 \cdot T^{-2}

    Your dimensional substitution and algebraic reduction were executed correctly according to your formula from Step 1, but they inherit the inverted ratio.

  3. Step 3

    SI base units:kg2(kg⋅m/s2)⋅m2=kg⋅m−3⋅s2\text{SI base units}: \frac{\text{kg}^2}{(\text{kg} \cdot \text{m}/\text{s}^2) \cdot \text{m}^2} = \text{kg} \cdot \text{m}^{-3} \cdot \text{s}^2

    Correct

    SI base units:(kg⋅m⋅s−2)⋅m2kg2=m3⋅kg−1⋅s−2\text{SI base units}: \frac{(\text{kg} \cdot \text{m} \cdot \text{s}^{-2}) \cdot \text{m}^2}{\text{kg}^2} = \text{m}^3 \cdot \text{kg}^{-1} \cdot \text{s}^{-2}

    Your unit conversion followed your inverted dimensional expression, resulting in the reciprocal of the true SI base unit expression.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly expressed force in fundamental dimensions as M⋅L⋅T−2M \cdot L \cdot T^{-2} and in base units as kg⋅m⋅s−2\text{kg} \cdot \text{m} \cdot \text{s}^{-2}.

You combined exponents accurately across each fundamental dimension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Isolation Error

You accidentally swapped the numerator and denominator when isolating the constant from the formula.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Misapplication of inverse operations during algebraic rearrangement: multiplying by the denominator and dividing by the multiplying factors was inverted into placing the isolated variable's coefficient in the numerator.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cross-Multiplication Check
  • For an equation A=B⋅CDA = B \cdot \frac{C}{D}, multiplying both sides by DD gives A⋅D=B⋅CA \cdot D = B \cdot C.

  • Always clear denominators first before dividing by unwanted factors.

Unit Reciprocal Reality Check
  • Since F∝GF \propto G, GG must be directly proportional to FF, so [G][G] must have [F][F] in the numerator.

  • Check that the subject variable and the dependent variable scale in the expected direction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Start from F=Gm1m2r2F = G \frac{m_1 m_2}{r^2}. Multiply both sides by r2r^2: F⋅r2=G⋅m1m2F \cdot r^2 = G \cdot m_1 m_2.

  2. Divide both sides by m1m2m_1 m_2: G=F⋅r2m1m2G = \frac{F \cdot r^2}{m_1 m_2}.

  3. Substitute the SI base units: [F]=kg⋅m⋅s−2[F] = \text{kg} \cdot \text{m} \cdot \text{s}^{-2}, [r2]=m2[r^2] = \text{m}^2, and [m1m2]=kg2[m_1 m_2] = \text{kg}^2.

  4. Simplify the powers: [G]=(kg⋅m⋅s−2)⋅m2kg2=kg1−2⋅m1+2⋅s−2=m3⋅kg−1⋅s−2[G] = \frac{(\text{kg} \cdot \text{m} \cdot \text{s}^{-2}) \cdot \text{m}^2}{\text{kg}^2} = \text{kg}^{1-2} \cdot \text{m}^{1+2} \cdot \text{s}^{-2} = \text{m}^3 \cdot \text{kg}^{-1} \cdot \text{s}^{-2}.

Final answer

m3⋅kg−1⋅s−2\text{m}^3 \cdot \text{kg}^{-1} \cdot \text{s}^{-2}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating a single variable from fractional formulas before substituting dimensions.

  • Verify your rearranged formula with a quick cross-multiplication check before doing unit arithmetic.

OverviewACEpath Teacher's Diagnosis

03 The student treats the unit of force as kg · m² / s² (confusing force with energy/work), resulting in an extra factor of length in the dimensions and base units.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    G=F⋅r2m1⋅m2G = \frac{F \cdot r^2}{m_1 \cdot m_2}

  2. Step 2

    [F]=M⋅L2⋅T−2[F] = M \cdot L^2 \cdot T^{-2}

    Correct

    [F]=M⋅L⋅T−2[F] = M \cdot L \cdot T^{-2}

    Force is mass times acceleration (F=maF = ma), which gives dimensions of [m][a]=M⋅L⋅T−2[m][a] = M \cdot L \cdot T^{-2}. The expression M⋅L2⋅T−2M \cdot L^2 \cdot T^{-2} represents work or energy (joules), not force (newtons).

  3. Step 3

    [G]=(M⋅L2⋅T−2)⋅L2M2=M−1⋅L4⋅T−2[G] = \frac{(M \cdot L^2 \cdot T^{-2}) \cdot L^2}{M^2} = M^{-1} \cdot L^4 \cdot T^{-2}

    Correct

    [G]=(M⋅L⋅T−2)⋅L2M2=M−1⋅L3⋅T−2[G] = \frac{(M \cdot L \cdot T^{-2}) \cdot L^2}{M^2} = M^{-1} \cdot L^3 \cdot T^{-2}

    Your algebra in combining powers was carried out correctly, but the result inherited the extra factor of LL from your incorrect force dimension.

  4. Step 4

    SI base units: (kg⋅m2s2)⋅m2kg2=m4⋅kg−1⋅s−2\text{SI base units: } \left(\frac{\text{kg}\cdot\text{m}^2}{\text{s}^2}\right) \cdot \frac{\text{m}^2}{\text{kg}^2} = \text{m}^4 \cdot \text{kg}^{-1} \cdot \text{s}^{-2}

    Correct

    SI base units: (kg⋅ms2)⋅m2kg2=m3⋅kg−1⋅s−2\text{SI base units: } \left(\frac{\text{kg}\cdot\text{m}}{\text{s}^2}\right) \cdot \frac{\text{m}^2}{\text{kg}^2} = \text{m}^3 \cdot \text{kg}^{-1} \cdot \text{s}^{-2}

    You substituted the base units consistently with your dimensional expression, but the unit of force was written as kg⋅m2s2\frac{\text{kg}\cdot\text{m}^2}{\text{s}^2} instead of kg⋅ms2\frac{\text{kg}\cdot\text{m}}{\text{s}^2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly isolated the gravitational constant GG from the gravitational force formula.

You correctly applied dimensional analysis principles to combine powers of mass, length, and time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing force with energy/work

You assigned [F]=M⋅L2⋅T−2[F] = M \cdot L^2 \cdot T^{-2} by accidentally including an extra power of length.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the base units and dimensions of force (F=ma  ⟹  kg⋅m⋅s−2F = ma \implies \text{kg}\cdot\text{m}\cdot\text{s}^{-2}) with those of work or energy (W=F⋅d  ⟹  kg⋅m2⋅s−2W = F \cdot d \implies \text{kg}\cdot\text{m}^2\cdot\text{s}^{-2}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Recall force from Newton's second law
  • F=maF = ma

  • Always derive the base unit of force from F=maF = ma: mass (kg\text{kg}) times acceleration (m⋅s−2\text{m}\cdot\text{s}^{-2}) yields kg⋅m⋅s−2\text{kg}\cdot\text{m}\cdot\text{s}^{-2} (M⋅L⋅T−2M \cdot L \cdot T^{-2}).

Distinguish force from energy
  • Energy=Force×Distance\text{Energy} = \text{Force} \times \text{Distance}

  • Check if an extra factor of meter or length (LL) has been added; force has L1L^1, while work/energy has L2L^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute Newton's second law: [F]=[m][a]=M⋅L⋅T−2[F] = [m][a] = M \cdot L \cdot T^{-2}.

  2. Substitute [F][F] into the rearranged formula: [G]=[F]⋅[r]2[m1][m2]=(M⋅L⋅T−2)⋅L2M2=M−1⋅L3⋅T−2[G] = \frac{[F] \cdot [r]^2}{[m_1][m_2]} = \frac{(M \cdot L \cdot T^{-2}) \cdot L^2}{M^2} = M^{-1} \cdot L^3 \cdot T^{-2}.

  3. Convert each dimension directly to fundamental SI base units: M−1→kg−1M^{-1} \rightarrow \text{kg}^{-1}, L3→m3L^3 \rightarrow \text{m}^3, and T−2→s−2T^{-2} \rightarrow \text{s}^{-2}.

Final answer

m3⋅kg−1⋅s−2\text{m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2} (or m3kg⋅s2\frac{\text{m}^3}{\text{kg}\cdot\text{s}^2})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving derived units directly from foundational defining equations like F=maF = ma and W=FdW = Fd.

  • Perform a quick sanity check between force ([F]=MLT−2[F] = M L T^{-2}) and energy ([E]=ML2T−2[E] = M L^2 T^{-2}) before substituting into complex formulas.

Lock it in

Similar question

01

Coulomb's law gives the electrostatic force between two charges as F=ke∣q1q2∣r2F = k_e \frac{|q_1 q_2|}{r^2}, where electric charge qq has the SI unit of ampere-seconds (A⋅s\text{A}\cdot\text{s}). Determine the SI base units of Coulomb's constant kek_e.

Answer

ke=F⋅r2q2k_e = \frac{F \cdot r^2}{q^2}. Substituting base units: (kg⋅m⋅s−2)⋅m2(A⋅s)2=m3⋅kg⋅s−4⋅A−2\frac{(\text{kg}\cdot\text{m}\cdot\text{s}^{-2})\cdot \text{m}^2}{(\text{A}\cdot\text{s})^2} = \text{m}^3\cdot\text{kg}\cdot\text{s}^{-4}\cdot\text{A}^{-2}.

02

A student models drag force as FD=12CDρAv2F_D = \frac{1}{2} C_D \rho A v^2, where ρ\rho is fluid density (kg⋅m−3\text{kg}\cdot\text{m}^{-3}), AA is cross-sectional area (m2\text{m}^2), and vv is flow speed (m⋅s−1\text{m}\cdot\text{s}^{-1}). Show that the drag coefficient CDC_D is dimensionless.

Answer

Isolate CDC_D: CD=2FDρAv2C_D = \frac{2 F_D}{\rho A v^2}. Substitute base units: [CD]=kg⋅m⋅s−2(kg⋅m−3)⋅m2⋅(m⋅s−1)2=kg⋅m⋅s−2kg⋅m⋅s−2=1[C_D] = \frac{\text{kg}\cdot\text{m}\cdot\text{s}^{-2}}{(\text{kg}\cdot\text{m}^{-3}) \cdot \text{m}^2 \cdot (\text{m}\cdot\text{s}^{-1})^2} = \frac{\text{kg}\cdot\text{m}\cdot\text{s}^{-2}}{\text{kg}\cdot\text{m}\cdot\text{s}^{-2}} = 1 (dimensionless).

03

In quantum mechanics, Planck's constant hh appears in the energy-frequency relation E=h⋅fE = h \cdot f, where EE has units of joules (N⋅m\text{N}\cdot\text{m}) and frequency ff has units of s−1\text{s}^{-1}. Using G=6.67×10−11 m3⋅kg−1⋅s−2G = 6.67 \times 10^{-11} \text{ m}^3\cdot\text{kg}^{-1}\cdot\text{s}^{-2}, find the dimensions of the Planck mass mP=h⋅cGm_P = \sqrt{\frac{h \cdot c}{G}}, where cc is the speed of light.

Answer

First find [h]=[E]/[f]=(ML2T−2)/(T−1)=ML2T−1[h] = [E]/[f] = (M L^2 T^{-2})/(T^{-1}) = M L^2 T^{-1}. Next, [c]=LT−1[c] = L T^{-1} and [G]=M−1L3T−2[G] = M^{-1} L^3 T^{-2}. Then [mP]=(ML2T−1)(LT−1)M−1L3T−2=ML3T−2M−1L3T−2=M2=M[m_P] = \sqrt{\frac{(M L^2 T^{-1})(L T^{-1})}{M^{-1} L^3 T^{-2}}} = \sqrt{\frac{M L^3 T^{-2}}{M^{-1} L^3 T^{-2}}} = \sqrt{M^2} = M (mass, in kg\text{kg}).

Loading workspace…