Resources
An engineer analyzes an oscilloscope display capturing the voltage output of a traveling ultrasound transducer propagating into tissue at an unknown speed . The waveform screen is calibrated with horizontal grid divisions of and vertical divisions of . The displayed sinusoidal signal has a crest-to-trough vertical span of . A single full cycle spans horizontally across exactly . From separate spatial interferometry, the physical wavelength in the tissue is known to be . Working backwards from this waveform trace, determine: (a) the peak voltage amplitude , (b) the wave period , and (c) the ultrasonic propagation speed in the tissue.
Answer and steps
Final answer
(a) , (b) , (c)
Steps
Part (a): Peak Voltage Amplitude
- Calculate the peak-to-peak voltage ():
The oscilloscope display shows a vertical crest-to-trough span of . Using the vertical scale factor of : - Find the amplitude ():
The amplitude of a symmetric sinusoidal wave is half of the peak-to-peak value:
Common Pitfall: Do not confuse peak-to-peak voltage with amplitude. Amplitude measures the displacement from the centerline (equilibrium) to a crest, which equals half the total crest-to-trough distance.
Part (b): Wave Period
- Determine the time of one complete cycle:
The horizontal axis of an oscilloscope trace displays time . A single full cycle spans horizontally. - Apply the horizontal scale factor:
Using the horizontal scale of :
Part (c): Ultrasonic Propagation Speed
- Relate wave speed to wavelength and period:
The speed of a traveling wave is related to its physical wavelength and period by the wave speed formula: - Convert units and calculate :
The wavelength is given as .
Substituting and :
Typical errors
01 The student confuses peak amplitude with peak-to-peak span, directly multiplying the full vertical crest-to-trough span by the scale factor to obtain 32.0 mV.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The span corresponds to the full crest-to-trough height (). The peak amplitude is measured from the center equilibrium axis to a crest, which equals half of the total peak-to-peak voltage.
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly extracted the horizontal division count and computed the period using the time scale.
You accurately converted and into SI base units to calculate the wave speed.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou treated the entire crest-to-trough span as the wave amplitude .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing peak amplitude with peak-to-peak span on an oscilloscope trace. Peak-to-peak voltage () is the total vertical distance between crest and trough, whereas amplitude () is measured from the center line to a peak: .
REASONING PATH
Your ACEpath teacher’s suggested approach- Oscilloscope Amplitude Rule
Whenever you read a full crest-to-trough span, remember to divide by to obtain the wave amplitude.
CORRECTED PATH
ACEpath Teacher's DemonstrationFind the peak-to-peak voltage: .
Divide by to find the peak amplitude: .
(a) , (b) , (c)
02 The student misuses the wave relation by multiplying wavelength by period instead of dividing by period, resulting in an incorrect wave speed of 1.215 · 10⁻⁹ m·s.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
Wave speed equals distance over time, which gives (or ). Multiplying wavelength by period yields units of , not .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the amplitude is half of the peak-to-peak crest-to-trough span.
You accurately converted the horizontal screen divisions into the wave period using the oscilloscope time-base calibration.
You correctly converted the wavelength from millimeters to meters.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeNo
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou confused the relationship between wave speed, wavelength, and period, multiplying by rather than dividing by (or multiplying by frequency ). A quick dimensional check reveals that .
REASONING PATH
Your ACEpath teacher’s suggested approach- Wave Speed and Period Relationship
Whenever given period , divide wavelength by rather than multiplying. Check your units: .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite down the fundamental wave speed equation: .
Substitute the values in SI units: .
Evaluate the quotient: .
(a) , (b) , (c)
03 The student fails to convert the period from microseconds to seconds before calculating speed, resulting in an erroneous speed of 1.50 m/s.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
You substituted without converting microseconds () into base SI units (seconds), which led to a speed off by a factor of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that wave amplitude is half of the peak-to-peak span.
You accurately read the horizontal cycle span and applied the time-scale multiplier to find the period.
You chose the correct fundamental relationship connecting wave speed, wavelength, and period.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOmitting the metric prefix multiplier ( for micro) when substituting an auxiliary variable into a standard formula requiring base SI units.
REASONING PATH
Your ACEpath teacher’s suggested approach- Convert Prefixes to Base Units First
Before substituting into , ensure length is in meters () and time is in seconds (), where .
Always rewrite quantities with metric prefixes in scientific notation using base units before performing division.
- Sanity Check Ultrasonic Speed in Tissue
Acoustic waves in soft biological tissue typically propagate at speeds near .
If your calculated speed is millimotile (), check whether time was accidentally expressed in microseconds rather than seconds.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert the period to seconds: .
Substitute into the wave speed equation with consistent SI units: .
Evaluate the quotient: .
(a) , (b) , (c)
Lock it in
On a symmetric sinusoidal waveform, what is the geometric relationship between peak amplitude () and peak-to-peak span ()?
. Amplitude is measured from the central equilibrium axis to a crest, which is half the total crest-to-trough height.
Similar question
An oscilloscope displays an acoustic wave with a vertical sensitivity of . The trace measures from the minimum trough to the maximum crest. Determine the peak amplitude of the signal.
Answer
. First calculate the peak-to-peak voltage: . Then divide by : .
A sound wave is analyzed on an oscilloscope calibrated to horizontally and vertically. A single cycle occupies horizontally, and the crest-to-trough vertical span is . If the wavelength of the sound in air is , find (a) the peak amplitude , (b) the wave frequency , and (c) the speed of sound .
Answer
(a) , (b) , (c) . Key steps: (a) ; (b) ; (c) .
An ultrasonic pulse with frequency travels through bone at . The detector signal shows an amplitude of and is displayed on a scope set to vertically and horizontally. Determine (a) the physical wavelength in bone, (b) the vertical crest-to-trough grid span in divisions, and (c) the horizontal grid span in divisions for two full cycles.
Answer
(a) , (b) , (c) . Key steps: (a) ; (b) ; (c) .