Resources

A deep-space interstellar probe is launched radially outward from a circular parking orbit around the Sun (M⊙=1.989×1030 kgM_\odot = 1.989 \times 10^{30}\text{ kg}, G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2) at radius r0=1.496×1011 mr_0 = 1.496 \times 10^{11}\text{ m} (1 AU1\text{ AU}) with an initial launch speed v0=4.80×104 m/sv_0 = 4.80 \times 10^4\text{ m/s}. (a) Calculate the asymptotic residual speed v∞v_\infty of the probe as its radial distance approaches infinity (r→∞r \to \infty). (b) Determine the fractional reduction in the gravitational field strength of the Sun g(r)g(r0)\frac{g(r)}{g(r_0)} when the probe reaches an asymptotic distance limit of r=100 AUr = 100\text{ AU}.

Answer and steps

Final answer

(a) v∞=2.29×104 m/sv_\infty = 2.29 \times 10^4\text{ m/s}; (b) g(100 AU)g(1 AU)=1.00×10−4\frac{g(100\text{ AU})}{g(1\text{ AU})} = 1.00 \times 10^{-4}

Steps

Part (a): Finding the Asymptotic Residual Speed v∞v_\infty

  1. Principle of Conservation of Mechanical Energy
    The probe travels under the sole influence of the Sun's gravitational field. Therefore, total mechanical energy EE (the sum of kinetic energy KK and gravitational potential energy UU) is conserved throughout its trajectory: E=K+U=12mv2−GM⊙mrE = K + U = \frac{1}{2}m v^2 - \frac{G M_\odot m}{r} where:

    • mm is the mass of the probe,
    • M⊙=1.989×1030 kgM_\odot = 1.989 \times 10^{30}\text{ kg} is the mass of the Sun,
    • G=6.674×10−11 N⋅m2/kg2G = 6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2 is Newton's gravitational constant,
    • r0=1.496×1011 mr_0 = 1.496 \times 10^{11}\text{ m} is the initial orbital radius (1 AU1\text{ AU}),
    • v0=4.80×104 m/sv_0 = 4.80 \times 10^4\text{ m/s} is the launch speed.
  2. Equating Initial and Asymptotic States
    As the probe escapes to an infinite distance (r→∞r \to \infty), the gravitational potential energy approaches zero (U∞→0U_\infty \to 0), and its speed approaches the constant residual speed v∞v_\infty: 12mv02−GM⊙mr0=12mv∞2−0\frac{1}{2}m v_0^2 - \frac{G M_\odot m}{r_0} = \frac{1}{2}m v_\infty^2 - 0 Dividing both sides by 12m\frac{1}{2}m: v∞2=v02−2GM⊙r0v_\infty^2 = v_0^2 - \frac{2 G M_\odot}{r_0}

    Note: The term 2GM⊙r0\frac{2GM_\odot}{r_0} equals the square of the solar escape speed from 1 AU1\text{ AU}, vesc2v_{\text{esc}}^2. Thus, v∞=v02−vesc2v_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2}.

  3. Evaluating the Numerical Values
    First, calculate the escape term: 2GM⊙r0=2⋅(6.674×10−11 N⋅m2/kg2)⋅(1.989×1030 kg)1.496×1011 m≈1.775×109 m2/s2\frac{2 G M_\odot}{r_0} = \frac{2 \cdot (6.674 \times 10^{-11}\text{ N}\cdot\text{m}^2/\text{kg}^2) \cdot (1.989 \times 10^{30}\text{ kg})}{1.496 \times 10^{11}\text{ m}} \approx 1.775 \times 10^9\text{ m}^2/\text{s}^2

    Next, calculate v02v_0^2: v02=(4.80×104 m/s)2=2.304×109 m2/s2v_0^2 = (4.80 \times 10^4\text{ m/s})^2 = 2.304 \times 10^9\text{ m}^2/\text{s}^2

    Subtract the two quantities: v∞2=2.304×109 m2/s2−1.775×109 m2/s2=5.29×108 m2/s2v_\infty^2 = 2.304 \times 10^9\text{ m}^2/\text{s}^2 - 1.775 \times 10^9\text{ m}^2/\text{s}^2 = 5.29 \times 10^8\text{ m}^2/\text{s}^2

    Taking the square root: v∞=5.29×108 m2/s2≈2.29×104 m/sv_\infty = \sqrt{5.29 \times 10^8\text{ m}^2/\text{s}^2} \approx 2.29 \times 10^4\text{ m/s}


Part (b): Ratio of Gravitational Field Strength at 100 AU100\text{ AU}

  1. Newton's Law of Gravitation for Field Strength
    The gravitational acceleration (field strength) g(r)g(r) due to a spherically symmetric central mass M⊙M_\odot at distance rr obeys the inverse-square law: g(r)=GM⊙r2g(r) = \frac{G M_\odot}{r^2}
  2. Ratio of Field Strengths
    Comparing the field strength at r=100 AUr = 100\text{ AU} to the field strength at the initial orbit r0=1 AUr_0 = 1\text{ AU}: g(r)g(r0)=GM⊙r2GM⊙r02=(r0r)2\frac{g(r)}{g(r_0)} = \frac{\frac{G M_\odot}{r^2}}{\frac{G M_\odot}{r_0^2}} = \left(\frac{r_0}{r}\right)^2
  3. Calculation
    Substitute the given distances in astronomical units: g(100 AU)g(1 AU)=(1 AU100 AU)2=(1100)2=1104=1.00×10−4\frac{g(100\text{ AU})}{g(1\text{ AU})} = \left(\frac{1\text{ AU}}{100\text{ AU}}\right)^2 = \left(\frac{1}{100}\right)^2 = \frac{1}{10^4} = 1.00 \times 10^{-4}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student linearly subtracts the escape velocity from the launch speed instead of subtracting their squares via kinetic energy conservation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    vesc=2GM/r0=2⋅6.674×10−11⋅1.989×1030/1.496×1011=4.21×104 m/sv_{\text{esc}} = \sqrt{2GM/r_0} = \sqrt{2 \cdot 6.674 \times 10^{-11} \cdot 1.989 \times 10^{30} / 1.496 \times 10^{11}} = 4.21 \times 10^4\text{ m/s}

  2. Step 2

    v∞=v0−vesc=4.80×104−4.21×104=5.90×103 m/sv_\infty = v_0 - v_{\text{esc}} = 4.80 \times 10^4 - 4.21 \times 10^4 = 5.90 \times 10^3\text{ m/s}

    Correct

    v∞=v02−vesc2=(4.80×104)2−(4.21×104)2≈2.29×104 m/sv_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2} = \sqrt{(4.80 \times 10^4)^2 - (4.21 \times 10^4)^2} \approx 2.29 \times 10^4\text{ m/s}

    Energy is proportional to the square of velocity, not velocity itself. Mechanical energy conservation gives 12mv∞2=12mv02−12mvesc2\frac{1}{2}mv_\infty^2 = \frac{1}{2}mv_0^2 - \frac{1}{2}mv_{\text{esc}}^2, which means v∞=v02−vesc2v_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2}.

  3. Step 3

    g(r)g(r0)=(r0r)2=(1100)2=1.00×10−4\frac{g(r)}{g(r_0)} = \left(\frac{r_0}{r}\right)^2 = \left(\frac{1}{100}\right)^2 = 1.00 \times 10^{-4}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the solar escape velocity at 1 AU.

You accurately applied the inverse-square law to determine the gravitational field strength ratio at 100 AU.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Linear Velocity Subtraction in Energy Conservation

No, this stems from treating velocity as a conserved linear scalar quantity rather than conserving kinetic and potential energy.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing energy conservation with linear speed difference. When an object escapes a gravitational well, the loss in kinetic energy equals the gravitational potential energy barrier (ΔK=ΔU\Delta K = \Delta U). Because kinetic energy scales with v2v^2, speeds combine via quadrature: v∞=v02−vesc2v_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2}, never v0−vescv_0 - v_{\text{esc}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kinetic Energy vs. Speed
  • Total mechanical energy E=12mv2+U(r)E = \frac{1}{2}mv^2 + U(r) depends on v2v^2, so work changes speed squared, not speed linearly.

  • Always write out the full energy balance equation before solving for residual speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write conservation of mechanical energy between launch and infinity: 12mv02−GM⊙mr0=12mv∞2+0\frac{1}{2}mv_0^2 - \frac{GM_\odot m}{r_0} = \frac{1}{2}mv_\infty^2 + 0

  2. Express the potential energy term using escape velocity: GM⊙r0=12vesc2\frac{GM_\odot}{r_0} = \frac{1}{2}v_{\text{esc}}^2

  3. Simplify to obtain: v∞2=v02−vesc2v_\infty^2 = v_0^2 - v_{\text{esc}}^2

  4. Substitute the values: v∞=(4.80×104 m/s)2−(4.21×104 m/s)2=2.304×109−1.772×109=5.32×108≈2.29×104 m/sv_\infty = \sqrt{(4.80 \times 10^4\text{ m/s})^2 - (4.21 \times 10^4\text{ m/s})^2} = \sqrt{2.304 \times 10^9 - 1.772 \times 10^9} = \sqrt{5.32 \times 10^8} \approx 2.29 \times 10^4\text{ m/s}

Final answer

(a) v∞=2.29×104 m/sv_\infty = 2.29 \times 10^4\text{ m/s}; (b) g(100 AU)g(1 AU)=1.00×10−4\frac{g(100\text{ AU})}{g(1\text{ AU})} = 1.00 \times 10^{-4}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how kinetic energy depends on speed squared (K∝v2K \propto v^2).

  • Practice deriving hyperbolic excess speed (v∞v_\infty) directly from energy conservation: E=constantE = \text{constant}.

OverviewACEpath Teacher's Diagnosis

02 The student assumes gravitational field strength is inversely proportional to distance rather than distance squared.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    12v02−GMr0=12v∞2  ⟹  v∞=v02−2GMr0\frac{1}{2}v_0^2 - \frac{GM}{r_0} = \frac{1}{2}v_\infty^2 \implies v_\infty = \sqrt{v_0^2 - \frac{2GM}{r_0}}

  2. Step 2

    v∞=(4.80×104)2−2⋅6.674×10−11⋅1.989×10301.496×1011  ⟹  v∞=2.30×104 m/sv_\infty = \sqrt{(4.80\times 10^4)^2 - 2\cdot\frac{6.674\times 10^{-11}\cdot 1.989\times 10^{30}}{1.496\times 10^{11}}} \implies v_\infty = 2.30\times 10^4\text{ m/s}

  3. Step 3

    g(r)g(r0)=r0r\frac{g(r)}{g(r_0)} = \frac{r_0}{r}

    Correct

    g(r)g(r0)=(r0r)2\frac{g(r)}{g(r_0)} = \left(\frac{r_0}{r}\right)^2

    Newton's law of universal gravitation states that gravitational field strength obeys an inverse-square law, g(r)=GM⊙r2g(r) = \frac{GM_\odot}{r^2}. Therefore, the ratio of field strengths must depend on the square of the distance ratio, (r0r)2\left(\frac{r_0}{r}\right)^2, rather than a linear inverse ratio.

  4. Step 4

    g(r)g(r0)=1100=0.0100\frac{g(r)}{g(r_0)} = \frac{1}{100} = 0.0100

    Correct

    g(100 AU)g(1 AU)=(1100)2=1.00×10−4\frac{g(100\text{ AU})}{g(1\text{ AU})} = \left(\frac{1}{100}\right)^2 = 1.00\times 10^{-4}

    Because the ratio formula omitted the squaring of distance, your numerical evaluation evaluated to 1100\frac{1}{100} instead of 110 000\frac{1}{10\,000}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the conservation of mechanical energy for escape trajectories.

You accurately calculated the asymptotic residual speed v∞v_\infty with correct units and significant figures.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverse-Square Law Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the gravitational field strength g(r)g(r) as inversely proportional to radial distance (g∝1/rg \propto 1/r) instead of inversely proportional to the square of the distance (g∝1/r2g \propto 1/r^2).

REASONING PATH
Your ACEpath teacher’s suggested approach
Gravitational Field vs. Gravitational Potential
  • Gravitational field strength (acceleration) is g=GMr2g = \frac{GM}{r^2} (inverse-square), while gravitational potential is V=−GMrV = -\frac{GM}{r} (inverse-linear).

  • Whenever comparing field strengths or forces at different radii, square the radius ratio: g2g1=(r1r2)2\frac{g_2}{g_1} = \left(\frac{r_1}{r_2}\right)^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall that the Sun's gravitational field strength is g(r)=GM⊙r2g(r) = \frac{GM_\odot}{r^2}.

  2. Set up the ratio between r=100 AUr = 100\text{ AU} and r0=1 AUr_0 = 1\text{ AU}: g(r)g(r0)=GM⊙/r2GM⊙/r02=(r0r)2\frac{g(r)}{g(r_0)} = \frac{GM_\odot / r^2}{GM_\odot / r_0^2} = \left(\frac{r_0}{r}\right)^2.

  3. Substitute the values: g(100 AU)g(1 AU)=(1 AU100 AU)2=1104=1.00×10−4\frac{g(100\text{ AU})}{g(1\text{ AU})} = \left(\frac{1\text{ AU}}{100\text{ AU}}\right)^2 = \frac{1}{10^4} = 1.00\times 10^{-4}.

Final answer

(a) v∞=2.30×104 m/sv_\infty = 2.30\times 10^4\text{ m/s}; (b) g(100 AU)g(1 AU)=1.00×10−4\frac{g(100\text{ AU})}{g(1\text{ AU})} = 1.00\times 10^{-4}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinct rr-dependencies for gravitational force/field (1/r21/r^2) versus gravitational potential energy/potential (1/r1/r).

  • Practice scaling ratios by writing down the base proportionalities before plugging in numbers.

OverviewACEpath Teacher's Diagnosis

03 The student forgets the factor of 2 in the gravitational potential energy term when applying energy conservation.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v∞=v02−G⋅M/r0v_\infty = \sqrt{v_0^2 - G \cdot M / r_0}

    Correct

    12mv02−GM⊙mr0=12mv∞2  ⟹  v∞=v02−2GM⊙r0\frac{1}{2}m v_0^2 - \frac{G M_\odot m}{r_0} = \frac{1}{2}m v_\infty^2 \implies v_\infty = \sqrt{v_0^2 - \frac{2 G M_\odot}{r_0}}

    When multiplying the conservation of energy equation 12mv02−GMmr0=12mv∞2\frac{1}{2}m v_0^2 - \frac{G M m}{r_0} = \frac{1}{2}m v_\infty^2 by 22 and dividing by mm, the gravitational term becomes 2GMr0\frac{2GM}{r_0} (which equals vesc2v_{\text{esc}}^2). You forgot to multiply the potential energy term by 22.

  2. Step 2

    v∞=(4.80×104)2−6.674×10−11⋅1.989×10301.496×1011  ⟹  v∞=2.304×109−8.873×108  ⟹  v∞=3.76×104 m/sv_\infty = \sqrt{(4.80\times 10^4)^2 - \frac{6.674\times 10^{-11} \cdot 1.989\times 10^{30}}{1.496\times 10^{11}}} \implies v_\infty = \sqrt{2.304\times 10^9 - 8.873\times 10^8} \implies v_\infty = 3.76\times 10^4\text{ m/s}

    Correct

    v∞=2.304×109−2(8.873×108)=5.29×108≈2.29×104 m/sv_\infty = \sqrt{2.304\times 10^9 - 2(8.873\times 10^8)} = \sqrt{5.29\times 10^8} \approx 2.29\times 10^4\text{ m/s}

    Your arithmetic and square root evaluation were executed accurately, but the numerical result was affected by the missing factor of 22 from the previous step.

  3. Step 3

    g(r)g(r0)=(r0r)2  ⟹  g(r)g(r0)=(1100)2=1.00×10−4\frac{g(r)}{g(r_0)} = \left(\frac{r_0}{r}\right)^2 \implies \frac{g(r)}{g(r_0)} = \left(\frac{1}{100}\right)^2 = 1.00\times 10^{-4}

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that mechanical energy is conserved during the outbound radial flight.

You correctly identified that the gravitational potential energy tends toward zero as r→∞r \to \infty.

You accurately applied the inverse-square law to determine the gravitational field strength ratio in Part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic factor omission in energy conservation

You forgot the factor of 22 multiplying the gravitational term when solving 12mv02+U(r0)=12mv∞2\frac{1}{2}m v_0^2 + U(r_0) = \frac{1}{2}m v_\infty^2 for v∞2v_\infty^2.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the gravitational potential energy per unit mass −GMr-\frac{GM}{r} with the squared escape speed term −2GMr-\frac{2GM}{r}, or forgetting that clearing 12\frac{1}{2} from kinetic energy multiplies all other terms by 22.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always start with the explicit energy balance
  • Total mechanical energy is E=K+U=12mv2−GMmrE = K + U = \frac{1}{2}m v^2 - \frac{G M m}{r}.

  • Write out 12mv02−GMmr0=12mv∞2\frac{1}{2}m v_0^2 - \frac{GMm}{r_0} = \frac{1}{2}m v_\infty^2 before isolating v∞v_\infty to ensure every term is multiplied by 2/m2/m.

Relate residual speed to escape speed
  • v∞2=v02−vesc2v_\infty^2 = v_0^2 - v_{\text{esc}}^2, where vesc=2GMr0v_{\text{esc}} = \sqrt{\frac{2GM}{r_0}}.

  • Check that the subtracted term corresponds to vesc2=2GMr0v_{\text{esc}}^2 = \frac{2GM}{r_0}, not the circular orbital speed squared vorb2=GMr0v_{\text{orb}}^2 = \frac{GM}{r_0}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up conservation of mechanical energy: 12mv02−GM⊙mr0=12mv∞2\frac{1}{2}m v_0^2 - \frac{G M_\odot m}{r_0} = \frac{1}{2}m v_\infty^2.

  2. Divide by 12m\frac{1}{2}m: v∞2=v02−2GM⊙r0v_\infty^2 = v_0^2 - \frac{2 G M_\odot}{r_0}.

  3. Substitute the numerical values: v∞2=2.304×109 m2/s2−2(8.873×108 m2/s2)=5.29×108 m2/s2v_\infty^2 = 2.304\times 10^9\text{ m}^2/\text{s}^2 - 2(8.873\times 10^8\text{ m}^2/\text{s}^2) = 5.29\times 10^8\text{ m}^2/\text{s}^2.

  4. Take the square root: v∞=5.29×108 m2/s2≈2.29×104 m/sv_\infty = \sqrt{5.29\times 10^8\text{ m}^2/\text{s}^2} \approx 2.29\times 10^4\text{ m/s}.

Final answer

(a) v∞=2.29×104 m/sv_\infty = 2.29\times 10^4\text{ m/s}; (b) g(100 AU)g(1 AU)=1.00×10−4\frac{g(100\text{ AU})}{g(1\text{ AU})} = 1.00\times 10^{-4}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice deriving hyperbolic excess speed directly from v∞=v02−vesc2v_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2}.

  • Be careful to distinguish orbital velocity vorb=GMrv_{\text{orb}} = \sqrt{\frac{GM}{r}} from escape velocity vesc=2GMrv_{\text{esc}} = \sqrt{\frac{2GM}{r}}.

Lock it in

Similar question

01

A spacecraft is launched from Earth's orbit where the escape speed from the Sun is vesc=42.1 km/sv_{\text{esc}} = 42.1\text{ km/s}. If the launch speed relative to the Sun is v0=50.0 km/sv_0 = 50.0\text{ km/s}, calculate its hyperbolic excess speed v∞v_\infty far from the Solar System.

Answer

Using v∞=v02−vesc2=50.02−42.12=2500−1772.41=727.59≈27.0 km/sv_\infty = \sqrt{v_0^2 - v_{\text{esc}}^2} = \sqrt{50.0^2 - 42.1^2} = \sqrt{2500 - 1772.41} = \sqrt{727.59} \approx 27.0\text{ km/s}.

02

A projectile is launched vertically from the surface of an airless asteroid with escape speed vesc=300 m/sv_{\text{esc}} = 300\text{ m/s}. To achieve a residual speed at infinity of v∞=400 m/sv_\infty = 400\text{ m/s}, what initial launch speed v0v_0 is required?

Answer

From v∞2=v02−vesc2v_\infty^2 = v_0^2 - v_{\text{esc}}^2, we have v0=v∞2+vesc2=4002+3002=500 m/sv_0 = \sqrt{v_\infty^2 + v_{\text{esc}}^2} = \sqrt{400^2 + 300^2} = 500\text{ m/s}.

03

Two identical probes are launched from the same orbit where the escape speed is vescv_{\text{esc}}. Probe A is launched at vA=1.25vescv_A = 1.25 v_{\text{esc}}, while Probe B is launched at vB=1.50vescv_B = 1.50 v_{\text{esc}}. Find the ratio of their final speeds at infinity, v∞,Bv∞,A\frac{v_{\infty, B}}{v_{\infty, A}}.

Answer

For Probe A: v∞,A=(1.25)2−1 vesc=1.5625−1 vesc=0.5625 vesc=0.75vescv_{\infty, A} = \sqrt{(1.25)^2 - 1}\,v_{\text{esc}} = \sqrt{1.5625 - 1}\,v_{\text{esc}} = \sqrt{0.5625}\,v_{\text{esc}} = 0.75 v_{\text{esc}}. For Probe B: v∞,B=(1.50)2−1 vesc=2.25−1 vesc=1.25 vesc≈1.118vescv_{\infty, B} = \sqrt{(1.50)^2 - 1}\,v_{\text{esc}} = \sqrt{2.25 - 1}\,v_{\text{esc}} = \sqrt{1.25}\,v_{\text{esc}} \approx 1.118 v_{\text{esc}}. Ratio: v∞,Bv∞,A=1.250.75=5/23/4=253≈1.49\frac{v_{\infty, B}}{v_{\infty, A}} = \frac{\sqrt{1.25}}{0.75} = \frac{\sqrt{5}/2}{3/4} = \frac{2\sqrt{5}}{3} \approx 1.49.

Loading workspace…