Resources
A golf ball is launched from ground level at an initial speed of toward an elevated green situated on a horizontal plateau at a height of above the fairway. (a) Determine the minimum launch angle required for the ball to reach the elevation of the plateau at the peak of its trajectory. (b) If the ball is launched at , find the total elapsed time when the ball passes the plateau height on its downward descent, and (c) calculate the horizontal displacement from the launch point at that moment. Let .
Answer and steps
Final answer
(a) ; (b) ; (c)
Steps
Part (a): Minimum Launch Angle to Reach the Plateau
At the peak of a projectile's trajectory, its vertical component of velocity is momentarily zero ().
- Relate maximum height to the initial vertical velocity: Using the kinematic equation :
- Solve for the launch angle :
- Substitute the given values:
Part (b): Elapsed Time on Downward Descent
When launched at , determine the components of the initial velocity:
- Set up the vertical position equation: The vertical displacement as a function of time is: Setting :
- Solve the quadratic equation using the quadratic formula:
-
Select the appropriate root:
- corresponds to the ball crossing the plateau elevation on the way up.
- corresponds to the ball reaching the plateau elevation on its downward descent.
Thus, .
Part (c): Horizontal Displacement at the Plateau
Because air resistance is neglected, horizontal velocity remains constant throughout the flight:
Substitute the values:
Typical errors
01 The student selects the smaller time root corresponding to the upward passage rather than the downward descent.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The problem specifically asked for the time when the ball reaches the plateau on its downward descent. The smaller root represents the ball crossing height on the way up, whereas the larger root corresponds to the downward descent.
- Step 4Correct
Your horizontal motion method is entirely sound, but your numerical answer is affected by using the ascent time rather than the descent time.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used the peak condition to find the minimum launch angle in Part (a).
You accurately resolved initial velocity components and formulated the quadratic equation for vertical position in Part (b).
You properly applied the constant horizontal velocity relation in Part (c).
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou chose the minus sign in the quadratic formula, giving the time for the upward passage rather than the downward descent.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConflating the physical meanings of the two real roots of the vertical position quadratic equation . A projectile reaches any intermediate elevation twice: the smaller time is on the ascending branch, while the larger time is on the descending branch.
REASONING PATH
Your ACEpath teacher’s suggested approach- Quadratic Roots in Projectile Elevation
For a parabolic trajectory reaching height , the smaller root is ascending, and the larger root is descending.
Always verify whether the problem asks for the target height on the way up (first pass) or on the way down (descent), and choose the corresponding sign accordingly.
CORRECTED PATH
ACEpath Teacher's DemonstrationEvaluate the downward descent time using the plus sign: .
Calculate the horizontal displacement at descent: .
(a) ; (b) ; (c)
02 The student confuses the trigonometric components by using cosine for vertical velocity and sine for horizontal velocity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because launch angles are measured relative to the horizontal fairway, the vertical velocity component is opposite to , requiring , not .
- Step 2Correct
You correctly chose the larger root for the downward descent, but you used cosine instead of sine to find the initial vertical velocity component .
- Step 3Correct
You correctly related horizontal range to constant horizontal velocity and flight time, but you assigned sine instead of cosine to the horizontal component .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that the vertical velocity equals zero at the peak of the trajectory.
You set up the quadratic vertical motion equation accurately and correctly selected the larger time root for the downward descent.
You correctly applied constant horizontal velocity to compute horizontal displacement.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally reversed sine and cosine when breaking the initial velocity vector into horizontal and vertical components.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisWhen a launch angle is specified relative to the horizontal ground, the horizontal side is adjacent to () and the vertical side is opposite to ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Reference Triangle Orientation
For an angle above the horizontal ground, and .
Draw a right triangle at the launch point with the base along the ground to verify that and before substituting numbers.
CORRECTED PATH
ACEpath Teacher's DemonstrationFor part (a), set at maximum height: .
Solve for : .
For part (b), compute and solve .
The downward crossing time is the larger root: .
For part (c), calculate , giving .
(a) ; (b) ; (c)
03 The student forgets to take the square root of the velocity squared term when setting up the peak vertical velocity relation, equating v0 sin θ to 2gh.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used instead of the kinematic relation . Because the vertical velocity at the peak is zero, the equation is , meaning you must take the square root of before dividing by .
- Step 2
- Step 3
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved initial velocity vectors into horizontal and vertical components.
You correctly modeled vertical position with a quadratic equation and identified the root representing the ball's descent.
You correctly calculated the horizontal displacement using uniform horizontal motion.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou equated initial velocity directly to rather than equating its square to .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou recalled the terms from Torricelli's kinematic equation but forgot that the velocity term must be squared, which also leads to a dimensional mismatch between velocity (m/s) and (m²/s²).
REASONING PATH
Your ACEpath teacher’s suggested approach- Dimensional Consistency Check
Every term in an equation must have matching units: , while .
Always verify that before solving for unknown variables.
- Peak Vertical Condition
At maximum height, , giving , so .
Take the square root of whenever determining the initial vertical velocity required to attain height .
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the peak vertical velocity condition in .
Solve for the sine ratio: .
Substitute numerical values: .
Take the inverse sine: .
Lock it in
When solving for a projectile launched from ground level, what do the two positive roots physically represent?
is the time the projectile passes height while moving upward; is the time it passes height while descending downward.
Similar question
A soccer ball is kicked from ground level with and . Find the time when the ball is at height on its downward descent. Use .
Answer
. Solve via the quadratic formula to get . Select the larger root for descent: .
An arrow is shot from ground level at speed at an angle of . A wall of height stands downrange. Determine the horizontal distance from the launch point to the wall if the arrow clears the wall top while falling downward. Use .
Answer
. Initial components are . Solve , giving . For downward flight, select . Then (or using unrounded values, with gives ).
A projectile is launched from ground level at an angle with initial speed toward an elevated plateau at height . What is the projectile's vertical velocity when it reaches the plateau on its downward descent? Use .
Answer
. Using where : . Taking the negative root for downward descent gives .