Resources
An accelerometer attached to an equipment container of mass sliding down a fixed ramp inclined at above the horizontal records a constant acceleration of down the ramp. By formulating the force balance equations from the free-body diagram along the axes parallel and perpendicular to the incline, reverse-engineer and calculate the coefficient of kinetic friction between the container and the ramp surface. Take .
Answer and steps
Final answer
Steps
Define the Coordinate System and Resolve Forces
To determine the coefficient of kinetic friction , we establish a coordinate system aligned with the inclined ramp and apply Newton's second law.
Let the inclined surface define our axes:
- The positive -axis points down the ramp, parallel to the incline.
- The positive -axis points perpendicular to and outward from the ramp surface.
The forces acting on the container of mass are:
- Gravity (), directed vertically downward. We resolve it into components:
- Parallel to the incline (downward):
- Perpendicular to the incline (into the ramp):
- Normal force (), directed perpendicular to the surface along the positive -axis.
- Kinetic friction (), directed opposing the downward sliding motion (up the ramp along the negative -axis).
Formulate the Perpendicular Force Balance
Because the container does not accelerate off or into the incline, the net force in the -direction is zero:
Solving for the normal force :
Substituting the given values:
Formulate the Parallel Force Balance
According to Newton's second law, the net force along the -axis causes the container to accelerate down the incline at :
Rearranging to solve for the force of kinetic friction :
Calculating the component values:
- Component of gravity down the ramp:
- Required net force for acceleration:
Thus, the frictional force opposing the motion is:
Calculate the Coefficient of Kinetic Friction
Kinetic friction is related to the normal force by . Solving for :
Using the evaluated forces:
Typical errors
01 The student swaps the sine and cosine components of gravity along and perpendicular to the incline, setting N = m·g·sin(θ) and the downhill gravity component as m·g·cos(θ), yielding μ_k ≈ 1.10.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The incline is inclined at above the horizontal. The angle between the vertical gravity vector and the perpendicular to the ramp is equal to . Therefore, the component of gravity perpendicular to the surface is adjacent to this angle and equals , which balances the normal force .
- Step 2Correct
The component of gravity pulling the container down the ramp is opposite to the angle inside the gravity vector triangle, making it , not .
- Step 3Correct
Your algebraic rearrangement for was logically sound, but it inherited the swapped sine and cosine terms from your force balance equations.
- Step 4Correct
Carrying through the swapped components yielded an incorrect coefficient of friction.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly applied Newton's second law along both perpendicular and parallel axes.
You accurately identified the relationship between kinetic friction and normal force as .
You correctly performed the algebraic substitution and numerical arithmetic for the expressions you wrote.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou swapped sine and cosine when decomposing the gravitational force vector on an inclined plane, using sine for the normal/perpendicular direction and cosine for the downhill/parallel direction.
REASONING PATH
Your ACEpath teacher’s suggested approach- Perpendicular vs. Parallel Gravity Components
For a ramp inclined at angle to the horizontal, the component of gravity perpendicular to the ramp is , and the downhill component parallel to the ramp is .
Always verify using extreme angles: if (flat surface), the downhill pull must vanish () and the normal force must equal full gravity ().
CORRECTED PATH
ACEpath Teacher's DemonstrationSet up the perpendicular force balance: .
Set up the parallel force balance: .
Express friction in terms of normal force: .
Solve for : .
Calculate the ratio: .
02 The student forgets that the ramp is inclined when finding the normal force and assumes N = m·g, resulting in an underestimated friction coefficient of μ_k ≈ 0.385.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
Because the ramp is inclined at an angle , only the component of gravity perpendicular to the surface balances the normal force. Setting overestimates the normal force.
- Step 2
- Step 3Correct
Your algebraic isolation and substitution were carried out cleanly, but your equation carried forward the incorrect expression in the denominator instead of .
- Step 4Correct
Your final numerical answer is underestimated due to the earlier error in the normal force calculation.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly identified that gravity acts down the incline as .
You set up a sound net-force equation along the ramp following Newton's second law.
You performed accurate algebraic manipulation and unit evaluation.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou used the flat-ground formula instead of accounting for the ramp angle with .
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the normal force as equal to the full weight of the object, forgetting that normal force is perpendicular to the contact surface and balances only the perpendicular component of gravity when no other vertical forces are present.
REASONING PATH
Your ACEpath teacher’s suggested approach- Establish Perpendicular Axis Balance
On a ramp of angle with no perpendicular acceleration, .
Always draw coordinate axes aligned with the ramp and decompose gravity into (parallel) and (perpendicular) before calculating .
CORRECTED PATH
ACEpath Teacher's DemonstrationBalance forces perpendicular to the incline: .
Substitute into the parallel equation of motion: .
Solve for : .
Evaluate the quotient: .
03 The student treats the friction force as acting down the incline with gravity rather than opposing motion, adding acceleration instead of subtracting it to get μ_k ≈ 0.931.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because the container slides down the ramp, kinetic friction must point up the ramp, directly opposing the velocity. Setting friction in the same direction as the downward gravitational component gives an incorrect force equation.
- Step 3Correct
This expression carries forward the sign error from the parallel force balance.
- Step 4Correct
Evaluating the expression with the sign error led to instead of the correct value .
WHAT YOU DID WELL
Compliments from Your TeacherYou set up the perpendicular coordinate axis and correctly solved for the normal force.
You correctly resolved the components of gravity into and .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated kinetic friction as acting down the ramp alongside gravity rather than opposing the downward sliding motion of the container.
REASONING PATH
Your ACEpath teacher’s suggested approach- Direction of Kinetic Friction
Kinetic friction always acts antiparallel (opposite) to the direction of relative sliding velocity.
Identify the velocity vector along the surface first, then draw the friction vector pointing in the exact opposite direction before writing .
CORRECTED PATH
ACEpath Teacher's DemonstrationWrite Newton's second law along the ramp: .
Rearrange to solve for friction: .
Express the coefficient of kinetic friction: .
Substitute the numerical values: .
Lock it in
On an incline of angle above horizontal, which trigonometric component of gravity acts perpendicular to the surface?
. The angle between the true vertical () and the surface normal is , making the perpendicular component the adjacent side.
Similar question
A box rests on a frictionless plane inclined at above horizontal. What is the magnitude of the normal force exerted by the ramp on the box? (Take ).
Answer
. In equilibrium along the perpendicular axis, .
A crate slides down a incline at constant velocity. Determine the coefficient of kinetic friction between the crate and the incline.
Answer
. At constant velocity, , so . Thus .
A block is pulled up a ramp by a rope parallel to the surface with tension . If the coefficient of kinetic friction is , calculate the acceleration of the block up the ramp. (Take ).
Answer
. Along the perpendicular axis: . Kinetic friction acting down the ramp is . Along the ramp: , yielding .