Resources

A toy car travels clockwise in a horizontal circle of radius R=4.00 mR = 4.00\text{ m} at a constant speed of v=6.00 m/sv = 6.00\text{ m/s}. It completes half a revolution from position AA (where its instantaneous velocity points due north) to position BB (where its instantaneous velocity points due south). Although the car's speed is constant throughout the motion, calculate the magnitude of its average acceleration vector between position AA and position BB.

Answer and steps

Final answer

5.73 m/s25.73\text{ m/s}^2

Steps

01

Understand the Definition of Average Acceleration

Average acceleration is a vector quantity defined as the change in velocity divided by the elapsed time:

a⃗avg=Δv⃗Δt=v⃗B−v⃗AΔt\vec{a}_{\text{avg}} = \frac{\Delta \vec{v}}{\Delta t} = \frac{\vec{v}_B - \vec{v}_A}{\Delta t}

Even though the car moves at a constant speed, its direction of motion changes continuously, resulting in a non-zero change in velocity and therefore a non-zero average acceleration.


02

Determine the Change in Velocity (Δv⃗\Delta \vec{v})

Let the positive yy-direction correspond to due north.

  • At point AA, the car's velocity points due north: v⃗A=+6.00j^ m/s\vec{v}_A = +6.00\hat{j}\text{ m/s}
  • At point BB (half a revolution later), the velocity points due south: v⃗B=−6.00j^ m/s\vec{v}_B = -6.00\hat{j}\text{ m/s}

The change in velocity vector is:

Δv⃗=v⃗B−v⃗A=(−6.00j^)−(6.00j^)=−12.00j^ m/s\Delta \vec{v} = \vec{v}_B - \vec{v}_A = (-6.00\hat{j}) - (6.00\hat{j}) = -12.00\hat{j}\text{ m/s}

The magnitude of the change in velocity is:

∣Δv⃗∣=12.00 m/s|\Delta \vec{v}| = 12.00\text{ m/s}

Common Pitfall: Do not subtract speeds to get 6.00−6.00=06.00 - 6.00 = 0. Acceleration depends on the vector difference of velocities, v⃗B−v⃗A\vec{v}_B - \vec{v}_A, not the change in scalar speed.


03

Calculate the Elapsed Time (Δt\Delta t)

The car traverses half of a circular path of radius R=4.00 mR = 4.00\text{ m}. The distance ss along this semicircular arc is:

s=πR=π⋅4.00 m=4.00π ms = \pi R = \pi \cdot 4.00\text{ m} = 4.00\pi\text{ m}

Because the speed v=6.00 m/sv = 6.00\text{ m/s} is constant, the time interval Δt\Delta t required to travel this distance is:

Δt=sv=4.00π6.00=2π3 s≈2.094 s\Delta t = \frac{s}{v} = \frac{4.00\pi}{6.00} = \frac{2\pi}{3}\text{ s} \approx 2.094\text{ s}


04

Compute the Magnitude of the Average Acceleration

Now, divide the magnitude of the change in velocity by the elapsed time:

∣a⃗avg∣=∣Δv⃗∣Δt=12.00 m/s2π3 s=36.002π=18π m/s2≈5.73 m/s2|\vec{a}_{\text{avg}}| = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{12.00\text{ m/s}}{\frac{2\pi}{3}\text{ s}} = \frac{36.00}{2\pi} = \frac{18}{\pi}\text{ m/s}^2 \approx 5.73\text{ m/s}^2

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats velocity as a scalar speed and subtracts magnitudes, concluding that the change in velocity and average acceleration are zero because the speed is constant.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δt=π(4.00)/6.00=2.09 s\Delta t = \pi(4.00) / 6.00 = 2.09\text{ s}

  2. Step 2

    Δv=vB−vA=6.00−6.00=0 m/s\Delta v = v_B - v_A = 6.00 - 6.00 = 0\text{ m/s}

    Correct

    Δv⃗=v⃗B−v⃗A=(−6.00j^)−(6.00j^)=−12.00j^ m/s  ⟹  ∣Δv⃗∣=12.00 m/s\Delta \vec{v} = \vec{v}_B - \vec{v}_A = (-6.00\hat{j}) - (6.00\hat{j}) = -12.00\hat{j}\text{ m/s} \implies |\Delta \vec{v}| = 12.00\text{ m/s}

    Velocity is a vector quantity, not a scalar. Because the car changes direction from north at AA to south at BB, the two velocities have opposite signs: v⃗B−v⃗A=−6.00j^−6.00j^=−12.00j^ m/s\vec{v}_B - \vec{v}_A = -6.00\hat{j} - 6.00\hat{j} = -12.00\hat{j}\text{ m/s}.

  3. Step 3

    aavg=02.09=0 m/s2a_{\text{avg}} = \frac{0}{2.09} = 0\text{ m/s}^2

    Correct

    ∣a⃗avg∣=∣Δv⃗∣Δt=12.002π3=18π≈5.73 m/s2|\vec{a}_{\text{avg}}| = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{12.00}{\frac{2\pi}{3}} = \frac{18}{\pi} \approx 5.73\text{ m/s}^2

    Your division followed logically from your value of Δv=0\Delta v = 0, but using the correct vector change gives ∣a⃗avg∣≈5.73 m/s2|\vec{a}_{\text{avg}}| \approx 5.73\text{ m/s}^2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the geometry of a circle to find the semicircular arc length πR\pi R.

You correctly calculated the elapsed time interval Δt\Delta t.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Scalar vs. Vector Velocity Subtraction

You subtracted the speed values directly instead of subtracting the velocity vectors.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing change in speed with change in velocity. Constant speed does not imply zero acceleration when the direction of travel changes.

REASONING PATH
Your ACEpath teacher’s suggested approach
Define Velocity Vectors with Direction
  • Average acceleration depends on Δv⃗=v⃗f−v⃗i\Delta \vec{v} = \vec{v}_f - \vec{v}_i, where direction matters.

  • Assign unit vectors or coordinate signs (e.g., +y+y for North, −y-y for South) to each velocity before subtracting.

Vector Subtraction for Opposite Directions
  • When an object reverses direction at the same speed vv, the change in velocity has magnitude v−(−v)=2vv - (-v) = 2v.

  • Check whether direction reversed; if so, add the magnitudes together instead of subtracting them.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the velocity vectors along the north-south axis: v⃗A=6.00j^ m/s\vec{v}_A = 6.00\hat{j}\text{ m/s} and v⃗B=−6.00j^ m/s\vec{v}_B = -6.00\hat{j}\text{ m/s}.

  2. Find the vector difference: Δv⃗=v⃗B−v⃗A=−6.00j^−6.00j^=−12.00j^ m/s\Delta \vec{v} = \vec{v}_B - \vec{v}_A = -6.00\hat{j} - 6.00\hat{j} = -12.00\hat{j}\text{ m/s}, so ∣Δv⃗∣=12.00 m/s|\Delta \vec{v}| = 12.00\text{ m/s}.

  3. Divide by the elapsed time: ∣a⃗avg∣=∣Δv⃗∣Δt=12.00 m/s2.094 s≈5.73 m/s2|\vec{a}_{\text{avg}}| = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{12.00\text{ m/s}}{2.094\text{ s}} \approx 5.73\text{ m/s}^2.

Final answer

5.73 m/s25.73\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing initial and final velocity vectors with tail-to-head or tip-to-tail subtraction whenever an object follows a curved path.

  • Remember that whenever motion turns around or bends, acceleration is non-zero even if speed remains strictly constant.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the magnitude of the average acceleration with the magnitude of instantaneous centripetal acceleration, evaluating v²/R instead of |Δv|/Δt.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a) aavg=v2Ra_{\text{avg}} = \frac{v^2}{R}

    Correct

    a⃗avg=Δv⃗Δt=v⃗B−v⃗AΔt\vec{a}_{\text{avg}} = \frac{\Delta \vec{v}}{\Delta t} = \frac{\vec{v}_B - \vec{v}_A}{\Delta t}

    The formula v2R\frac{v^2}{R} yields the magnitude of instantaneous centripetal acceleration at any single point along the circular path, not the average acceleration over a finite time interval.

  2. Step 2

    b) aavg=(6.00)24.00=36.004.00=9.00 m/s2a_{\text{avg}} = \frac{(6.00)^2}{4.00} = \frac{36.00}{4.00} = 9.00\text{ m/s}^2

    Correct

    ∣a⃗avg∣=∣Δv⃗∣Δt=12.00 m/s2π3 s=18π m/s2≈5.73 m/s2|\vec{a}_{\text{avg}}| = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{12.00\text{ m/s}}{\frac{2\pi}{3}\text{ s}} = \frac{18}{\pi}\text{ m/s}^2 \approx 5.73\text{ m/s}^2

    This calculation is carried out correctly based on your chosen formula, but it inherits the formula error from Step 1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the radius R=4.00 mR = 4.00\text{ m} and speed v=6.00 m/sv = 6.00\text{ m/s} from the problem description.

You evaluated the arithmetic in your algebraic expression accurately and included correct units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Instantaneous Centripetal Acceleration with Average Acceleration

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You used the formula for instantaneous centripetal acceleration (ac=v2Ra_c = \frac{v^2}{R}) rather than finding the vector difference between initial and final velocities divided by the elapsed travel time (a⃗avg=Δv⃗Δt\vec{a}_{\text{avg}} = \frac{\Delta \vec{v}}{\Delta t}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Average vs. Instantaneous Acceleration
  • Average acceleration over a time interval Δt\Delta t is always defined as a⃗avg=v⃗f−v⃗iΔt\vec{a}_{\text{avg}} = \frac{\vec{v}_f - \vec{v}_i}{\Delta t}, whereas ac=v2Ra_c = \frac{v^2}{R} gives instantaneous radial acceleration at an instant.

  • Check whether the question asks for acceleration at a specific moment or over an interval between two positions.

Vector Velocity Change
  • Because velocity is a vector, reversing direction from +vj^+v\hat{j} to −vj^-v\hat{j} gives a change of ∣Δv⃗∣=2v|\Delta \vec{v}| = 2v, not zero.

  • Draw the velocity vectors at the initial and final points to set up Δv⃗=v⃗f−v⃗i\Delta \vec{v} = \vec{v}_f - \vec{v}_i vectorially.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the vector change in velocity between point AA and point BB: taking north as positive j^\hat{j}, v⃗A=+6.00j^ m/s\vec{v}_A = +6.00\hat{j}\text{ m/s} and v⃗B=−6.00j^ m/s\vec{v}_B = -6.00\hat{j}\text{ m/s}, so Δv⃗=v⃗B−v⃗A=−12.00j^ m/s\Delta \vec{v} = \vec{v}_B - \vec{v}_A = -12.00\hat{j}\text{ m/s}, giving ∣Δv⃗∣=12.00 m/s|\Delta \vec{v}| = 12.00\text{ m/s}.

  2. Find the elapsed time along the semicircular path of distance s=πR=4.00π ms = \pi R = 4.00\pi\text{ m}: Δt=sv=4.00π m6.00 m/s=2π3 s\Delta t = \frac{s}{v} = \frac{4.00\pi\text{ m}}{6.00\text{ m/s}} = \frac{2\pi}{3}\text{ s}.

  3. Divide the magnitude of the velocity change by the elapsed time: ∣a⃗avg∣=∣Δv⃗∣Δt=12.002π3=18π m/s2≈5.73 m/s2|\vec{a}_{\text{avg}}| = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{12.00}{\frac{2\pi}{3}} = \frac{18}{\pi}\text{ m/s}^2 \approx 5.73\text{ m/s}^2.

Final answer

5.73 m/s25.73\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between instantaneous centripetal acceleration (v2/Rv^2/R) and average acceleration (Δv⃗/Δt\Delta \vec{v}/\Delta t).

  • Practice finding the vector difference Δv⃗=v⃗f−v⃗i\Delta \vec{v} = \vec{v}_f - \vec{v}_i for circular motion over quarter, half, and full revolutions.

OverviewACEpath Teacher's Diagnosis

03 The student uses the straight-line displacement between the points divided by the speed to find time instead of using the semicircular arc distance traveled.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δv=6.00−(−6.00)=12.00 m/s\Delta v = 6.00 - (-6.00) = 12.00\text{ m/s}

  2. Step 2

    d=2R=2(4.00)=8.00 m  ⟹  Δt=dv=8.006.00=1.33 sd = 2R = 2(4.00) = 8.00\text{ m} \implies \Delta t = \frac{d}{v} = \frac{8.00}{6.00} = 1.33\text{ s}

    Correct

    s=πR=4.00π m  ⟹  Δt=sv=4.00π6.00=2π3 s≈2.094 ss = \pi R = 4.00\pi\text{ m} \implies \Delta t = \frac{s}{v} = \frac{4.00\pi}{6.00} = \frac{2\pi}{3}\text{ s} \approx 2.094\text{ s}

    The car moves along the circular perimeter at speed vv, so the elapsed time depends on the path distance (semicircle arc length s=πRs = \pi R), not the straight-line displacement distance (2R2R).

  3. Step 3

    aavg=12.001.33=9.02 m/s2a_{\text{avg}} = \frac{12.00}{1.33} = 9.02\text{ m/s}^2

    Correct

    ∣a⃗avg∣=∣Δv⃗∣Δt=12.002π3=18π≈5.73 m/s2|\vec{a}_{\text{avg}}| = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{12.00}{\frac{2\pi}{3}} = \frac{18}{\pi} \approx 5.73\text{ m/s}^2

    You correctly divided your velocity change by your calculated time interval, but the resulting acceleration value is incorrect due to the time error in Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You accounted for the reversal of the velocity direction when calculating the change in velocity vector.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Displacement vs. Distance in Path Time

You substituted the straight-line displacement distance between endpoints instead of the actual curved path length to calculate travel time at constant speed.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing straight-line distance (displacement magnitude ∣Δr⃗∣|\Delta \vec{r}|) with path distance (ss) when applying Δt=distancespeed\Delta t = \frac{\text{distance}}{\text{speed}}. When an object follows a curved path at constant speed, the elapsed time equals the arc length divided by speed.

REASONING PATH
Your ACEpath teacher’s suggested approach
Elapsed Time along a Trajectory
  • For motion at constant speed vv, elapsed time is Δt=sv\Delta t = \frac{s}{v}, where ss is the total arc length traveled along the path.

  • Always find the actual path length traversed (such as πR\pi R for a semicircle) before dividing by scalar speed.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the semicircular arc length: s=πR=π(4.00 m)=4.00π ms = \pi R = \pi (4.00\text{ m}) = 4.00\pi\text{ m}.

  2. Compute the time taken to travel this distance at constant speed: Δt=sv=4.00π6.00=2π3 s≈2.094 s\Delta t = \frac{s}{v} = \frac{4.00\pi}{6.00} = \frac{2\pi}{3}\text{ s} \approx 2.094\text{ s}.

  3. Divide the change in velocity by the true elapsed time: ∣a⃗avg∣=∣Δv⃗∣Δt=12.00 m/s2π3 s=18π m/s2≈5.73 m/s2|\vec{a}_{\text{avg}}| = \frac{|\Delta \vec{v}|}{\Delta t} = \frac{12.00\text{ m/s}}{\frac{2\pi}{3}\text{ s}} = \frac{18}{\pi}\text{ m/s}^2 \approx 5.73\text{ m/s}^2.

Final answer

5.73 m/s25.73\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between path distance (ss) and displacement (∣Δr⃗∣|\Delta \vec{r}|) along curved trajectories.

  • Remember that time at constant speed is always path length divided by speed, while average acceleration is velocity change vector divided by time.

Lock it in

Similar question

01

A tennis ball hits a wall horizontally at 15.0 m/s15.0\text{ m/s} and rebounds horizontally in the exact opposite direction at 12.0 m/s12.0\text{ m/s}. The collision lasts 0.030 s0.030\text{ s}. What is the magnitude of the average acceleration of the ball during the collision?

Answer

900 m/s2900\text{ m/s}^2. Taking the rebound direction as positive, Δv=(+12.0)−(−15.0)=27.0 m/s\Delta v = (+12.0) - (-15.0) = 27.0\text{ m/s}. Then aavg=27.0 m/s0.030 s=900 m/s2a_{\text{avg}} = \frac{27.0\text{ m/s}}{0.030\text{ s}} = 900\text{ m/s}^2.

02

A runner travels at a constant speed of 5.00 m/s5.00\text{ m/s} along a circular track. In moving from point PP to point QQ, the runner completes a quarter of a circle (90∘90^\circ turn) in an elapsed time of 3.14 s3.14\text{ s}. Find the magnitude of the runner's average acceleration between PP and QQ.

Answer

2.25 m/s22.25\text{ m/s}^2. The velocity vectors are perpendicular: ∣Δv⃗∣=5.002+5.002=5.002≈7.071 m/s|\Delta \vec{v}| = \sqrt{5.00^2 + 5.00^2} = 5.00\sqrt{2} \approx 7.071\text{ m/s}. Dividing by time gives ∣a⃗avg∣=7.0713.14≈2.25 m/s2|\vec{a}_{\text{avg}}| = \frac{7.071}{3.14} \approx 2.25\text{ m/s}^2.

03

A particle moves along a horizontal circular path of radius R=2.00 mR = 2.00\text{ m} at a constant speed of v=4.00 m/sv = 4.00\text{ m/s}. Calculate the magnitude of its average acceleration vector over one complete revolution (360∘360^\circ).

Answer

0 m/s20\text{ m/s}^2. After one complete revolution, the final velocity vector is identical to the initial velocity vector (v⃗f=v⃗i\vec{v}_f = \vec{v}_i), so Δv⃗=0⃗\Delta \vec{v} = \vec{0}, yielding ∣a⃗avg∣=0|\vec{a}_{\text{avg}}| = 0.

Loading workspace…