Resources

A small research sphere is launched vertically upward from ground level (y=0 my = 0\text{ m}) with an initial launch speed of v0=24.5 m/sv_0 = 24.5\text{ m/s}. Assuming negligible air resistance and taking the acceleration due to gravity to be g=9.80 m/s2g = 9.80\text{ m/s}^2 directed downward, calculate: (a) the maximum height Hmax⁡H_{\max} attained by the sphere above the ground, and (b) the total elapsed flight time ttotalt_{\text{total}} from launch until the sphere returns to its initial launch elevation.

Answer and steps

Final answer

(a) Hmax⁡=30.6 mH_{\max} = 30.6\text{ m}; (b) ttotal=5.00 st_{\text{total}} = 5.00\text{ s}

Steps

Part (a): Maximum Height (Hmax⁡H_{\max})

  1. Identify the governing kinematic relation: Choose upward as the positive yy-direction. The motion occurs under constant downward gravitational acceleration, a=−g=−9.80 m/s2a = -g = -9.80\text{ m/s}^2.

    At the peak of its trajectory, the vertical velocity of the sphere momentarily decreases to zero: v=0 m/sv = 0\text{ m/s}

  2. Apply the velocity-displacement kinematic formula: v2=v02−2g(y−y0)v^2 = v_0^2 - 2g(y - y_0)

    Setting y0=0 my_0 = 0\text{ m}, y=Hmax⁡y = H_{\max}, and v=0 m/sv = 0\text{ m/s}: 0=v02−2gHmax⁡0 = v_0^2 - 2gH_{\max}

  3. Solve for Hmax⁡H_{\max}: Hmax⁡=v022gH_{\max} = \frac{v_0^2}{2g}

    Substitute the given values: Hmax⁡=(24.5 m/s)22(9.80 m/s2)=600.25 m2/s219.6 m/s2≈30.625 m≈30.6 mH_{\max} = \frac{(24.5\text{ m/s})^2}{2(9.80\text{ m/s}^2)} = \frac{600.25\text{ m}^2/\text{s}^2}{19.6\text{ m/s}^2} \approx 30.625\text{ m} \approx 30.6\text{ m}


Part (b): Total Elapsed Flight Time (ttotalt_{\text{total}})

  1. Method 1: Using the displacement equation When the sphere returns to the launch level, its net displacement is zero: y(t)−y0=0 my(t) - y_0 = 0\text{ m}

    Using the position kinematic formula: y(t)=v0t−12gt2y(t) = v_0 t - \frac{1}{2}gt^2

    Setting y(t)=0y(t) = 0: t(v0−12gt)=0t\left(v_0 - \frac{1}{2}gt\right) = 0

    The root t=0 st = 0\text{ s} corresponds to the moment of launch, while the non-zero root gives the total flight time: ttotal=2v0gt_{\text{total}} = \frac{2v_0}{g}

  2. Calculate the numerical value: ttotal=2(24.5 m/s)9.80 m/s2=49.0 m/s9.80 m/s2=5.00 st_{\text{total}} = \frac{2(24.5\text{ m/s})}{9.80\text{ m/s}^2} = \frac{49.0\text{ m/s}}{9.80\text{ m/s}^2} = 5.00\text{ s}
  3. Alternative check using trajectory symmetry: The time taken to reach the maximum height is: tup=v0g=24.5 m/s9.80 m/s2=2.50 st_{\text{up}} = \frac{v_0}{g} = \frac{24.5\text{ m/s}}{9.80\text{ m/s}^2} = 2.50\text{ s} In the absence of air resistance, the upward flight and downward descent are completely symmetric: ttotal=2⋅tup=2(2.50 s)=5.00 st_{\text{total}} = 2 \cdot t_{\text{up}} = 2(2.50\text{ s}) = 5.00\text{ s}

Pitfall note: Ensure the sign convention is consistent throughout. When upward is defined as positive, initial velocity v0v_0 is positive, whereas acceleration a=−ga = -g is negative.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 2 in the denominator of the kinematic formula v² = v₀² - 2gh, computing H_max = v₀²/g instead of v₀²/(2g).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v2=v02−gh  ⟹  0=(24.5)2−9.80×Hmax⁡v^2 = v_0^2 - gh \implies 0 = (24.5)^2 - 9.80 \times H_{\max}

    Correct

    v2=v02−2gHmax⁡  ⟹  0=(24.5)2−2(9.80)Hmax⁡v^2 = v_0^2 - 2g H_{\max} \implies 0 = (24.5)^2 - 2(9.80) H_{\max}

    You omitted the factor of 22 in the work-energy kinematic equation. The standard formula is v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y, which becomes v2=v02−2ghv^2 = v_0^2 - 2gh under downward gravity.

  2. Step 2

    Hmax⁡=600.259.80=61.25 mH_{\max} = \frac{600.25}{9.80} = 61.25\text{ m}

    Correct

    Hmax⁡=600.2519.60≈30.6 mH_{\max} = \frac{600.25}{19.60} \approx 30.6\text{ m}

    Because the denominator missed the factor of 22, your calculated height is twice the actual maximum height.

  3. Step 3

    y=v0t−(12)gt2  ⟹  0=24.5t−4.90t2y = v_0 t - \left(\frac{1}{2}\right)gt^2 \implies 0 = 24.5t - 4.90t^2

  4. Step 4

    ttotal=24.54.90=5.00 st_{\text{total}} = \frac{24.5}{4.90} = 5.00\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that the vertical velocity at maximum height is zero.

You correctly set up the displacement equation y=v0t−12gt2y = v_0 t - \frac{1}{2}gt^2 to find the total flight time.

You solved the quadratic displacement equation cleanly to obtain 5.00 s5.00\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 2 in Kinematic Equation

You wrote v2=v02−ghv^2 = v_0^2 - gh instead of v2=v02−2ghv^2 = v_0^2 - 2gh.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated the kinematic relation v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y with either gravitational potential energy per unit mass ghgh or forgot the factor of 22 arising from the integration of acceleration with respect to displacement.

REASONING PATH
Your ACEpath teacher’s suggested approach
Verify third kinematic equation
  • v2−v02=2aΔyv^2 - v_0^2 = 2a\Delta y, or from conservation of energy: 12mv2−12mv02=−mgh\frac{1}{2}m v^2 - \frac{1}{2}m v_0^2 = -mgh.

  • Always check that the acceleration term in the velocity-squared formula contains a factor of 22.

Dimensional and energy cross-check
  • At the apex, kinetic energy fully converts to potential energy: 12mv02=mgh  ⟹  Hmax⁡=v022g\frac{1}{2}m v_0^2 = mgh \implies H_{\max} = \frac{v_0^2}{2g}.

  • Use energy conservation as a quick mental check to confirm the factor of 22 in the denominator.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set v=0 m/sv = 0\text{ m/s} at the highest point using v2=v02−2gHmax⁡v^2 = v_0^2 - 2g H_{\max}.

  2. 0=(24.5 m/s)2−2(9.80 m/s2)Hmax⁡0 = (24.5\text{ m/s})^2 - 2(9.80\text{ m/s}^2)H_{\max}

  3. Hmax⁡=600.25 m2/s219.60 m/s2≈30.6 mH_{\max} = \frac{600.25\text{ m}^2/\text{s}^2}{19.60\text{ m/s}^2} \approx 30.6\text{ m}

Final answer

(a) Hmax⁡≈30.6 mH_{\max} \approx 30.6\text{ m}; (b) ttotal=5.00 st_{\text{total}} = 5.00\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of v2=v02+2aΔxv^2 = v_0^2 + 2a\Delta x from work-energy theorem or calculus to anchor why the factor of 2 must be present.

  • Practice computing maximum heights using both kinematics and energy conservation to build cross-checking habits.

OverviewACEpath Teacher's Diagnosis

02 The student calculates only the time to reach maximum height (time of ascent) and fails to double it to find the total flight time for the round trip.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    v2=v02−2gHmax⁡  ⟹  0=(24.5)2−2(9.80)Hmax⁡  ⟹  Hmax⁡=600.2519.6=30.625 mv^2 = v_0^2 - 2g H_{\max} \implies 0 = (24.5)^2 - 2(9.80)H_{\max} \implies H_{\max} = \frac{600.25}{19.6} = 30.625\text{ m}

  2. Step 2

    v=v0−gt  ⟹  0=24.5−9.80t  ⟹  ttotal=24.59.80=2.50 sv = v_0 - gt \implies 0 = 24.5 - 9.80t \implies t_{\text{total}} = \frac{24.5}{9.80} = 2.50\text{ s}

    Correct

    v=0  ⟹  tup=24.5 m/s9.80 m/s2=2.50 s  ⟹  ttotal=2tup=5.00 sv = 0 \implies t_{\text{up}} = \frac{24.5\text{ m/s}}{9.80\text{ m/s}^2} = 2.50\text{ s} \implies t_{\text{total}} = 2 t_{\text{up}} = 5.00\text{ s}

    Setting v=0 m/sv = 0\text{ m/s} finds only the time of ascent to the peak (tup=2.50 st_{\text{up}} = 2.50\text{ s}). For a projectile launched and landing at the same vertical level, the total flight time includes both ascent and descent: ttotal=2tup=5.00 st_{\text{total}} = 2 t_{\text{up}} = 5.00\text{ s}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the condition v=0 m/sv = 0\text{ m/s} at the apex of the trajectory to solve for the maximum height.

You accurately calculated the time needed to decelerate from initial launch speed to zero at the peak.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Equating Peak Time to Total Flight Time

You labeled the apex time tup=2.50 st_{\text{up}} = 2.50\text{ s} as the total round-trip time ttotalt_{\text{total}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Setting the instantaneous velocity to zero (v=0v = 0) isolates the apex of the trajectory rather than the return to ground level. When an object returns to its launch height, its net vertical displacement is zero (Δy=0\Delta y = 0), which yields ttotal=2v0gt_{\text{total}} = \frac{2v_0}{g}, exactly twice the ascent time.

REASONING PATH
Your ACEpath teacher’s suggested approach
Match Boundary Conditions to the Question
  • v=0 m/sv = 0\text{ m/s} defines the peak of flight; Δy=0 m\Delta y = 0\text{ m} defines the return to the launch elevation.

  • Always verify whether the requested time corresponds to the peak (v=0v = 0) or the complete round trip (Δy=0\Delta y = 0 or ttotal=2tupt_{\text{total}} = 2 t_{\text{up}}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that t=2.50 st = 2.50\text{ s} is the time to reach the apex: tup=v0g=2.50 st_{\text{up}} = \frac{v_0}{g} = 2.50\text{ s}.

  2. Apply trajectory symmetry for equal launch and landing elevations: tdown=tup=2.50 st_{\text{down}} = t_{\text{up}} = 2.50\text{ s}.

  3. Sum the upward and downward intervals: ttotal=2×2.50 s=5.00 st_{\text{total}} = 2 \times 2.50\text{ s} = 5.00\text{ s}.

Final answer

(a) Hmax⁡=30.6 mH_{\max} = 30.6\text{ m}; (b) ttotal=5.00 st_{\text{total}} = 5.00\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review trajectory symmetry for symmetric vertical motion where ttotal=2tupt_{\text{total}} = 2t_{\text{up}}.

  • Practice solving for total flight time directly using the displacement equation Δy=v0t−12gt2=0\Delta y = v_0 t - \frac{1}{2}gt^2 = 0.

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the initial velocity in the kinematic formula, using H_max = v₀ / (2g) instead of v₀² / (2g).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    0=v0−2gHmax⁡0 = v_0 - 2g H_{\max}

    Correct

    v2=v02−2gHmax⁡  ⟹  0=v02−2gHmax⁡v^2 = v_0^2 - 2g H_{\max} \implies 0 = v_0^2 - 2g H_{\max}

    You applied a linear velocity term rather than the squared velocity term. The work-energy / kinematic relation relating velocity and displacement is v2=v02−2gΔyv^2 = v_0^2 - 2g\Delta y. At maximum height v=0 m/sv = 0\text{ m/s}, giving 0=v02−2gHmax⁡0 = v_0^2 - 2g H_{\max}.

  2. Step 2

    Hmax⁡=24.52×9.80  ⟹  Hmax⁡=24.519.6=1.25 mH_{\max} = \frac{24.5}{2 \times 9.80} \implies H_{\max} = \frac{24.5}{19.6} = 1.25\text{ m}

    Correct

    Hmax⁡=v022g=(24.5 m/s)22(9.80 m/s2)=30.6 mH_{\max} = \frac{v_0^2}{2g} = \frac{(24.5\text{ m/s})^2}{2(9.80\text{ m/s}^2)} = 30.6\text{ m}

    Your arithmetic was carried out cleanly, but the value is affected by using v0v_0 instead of v02v_0^2 in the numerator.

  3. Step 3

    y=v0t−12gt2  ⟹  0=24.5t−4.90t2y = v_0 t - \frac{1}{2}gt^2 \implies 0 = 24.5t - 4.90t^2

  4. Step 4

    ttotal=24.54.90=5.00 st_{\text{total}} = \frac{24.5}{4.90} = 5.00\text{ s}

WHAT YOU DID WELL
Compliments from Your Teacher

You recognized that vertical velocity is zero at the trajectory peak.

You correctly identified and applied the position equation y(t)=v0t−12gt2y(t) = v_0 t - \frac{1}{2}gt^2 for the return to ground level.

You solved the quadratic time equation accurately to find ttotal=5.00 st_{\text{total}} = 5.00\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Velocity Exponent in Kinematic Formula

You wrote v=v0−2gΔyv = v_0 - 2g\Delta y instead of v2=v02−2gΔyv^2 = v_0^2 - 2g\Delta y, leaving off the power of 22 on the velocity terms.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the time-independent kinematic relation v2=v02+2aΔyv^2 = v_0^2 + 2a\Delta y with linear formulas such as v=v0+atv = v_0 + at, or misremembering Torricelli's equation without squared velocity terms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Perform a Dimensional Check
  • Every term in an addition or subtraction must share identical physical units: [v2]=m2/s2[v^2] = \text{m}^2/\text{s}^2 and [2gΔy]=(m/s2)(m)=m2/s2[2g\Delta y] = (\text{m}/\text{s}^2)(\text{m}) = \text{m}^2/\text{s}^2.

  • Before calculating, verify that both sides have units of m2/s2\text{m}^2/\text{s}^2. In v0−2gHv_0 - 2gH, the first term has units of m/s\text{m/s} while 2gH2gH has units of m2/s2\text{m}^2/\text{s}^2, signaling an inconsistency.

Link to Work-Kinetic Energy
  • The kinematic relation v2−v02=2aΔyv^2 - v_0^2 = 2a\Delta y is directly derived from ΔK=Wnet  ⟺  12mv2−12mv02=−mgΔy\Delta K = W_{\text{net}} \iff \frac{1}{2}mv^2 - \frac{1}{2}mv_0^2 = -mg\Delta y.

  • Recall that kinetic energy depends on velocity squared, so formulas relating speed and height must contain v2v^2 and v02v_0^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the velocity-displacement kinematic equation: v2=v02−2gHmax⁡v^2 = v_0^2 - 2g H_{\max}

  2. Substitute v=0 m/sv = 0\text{ m/s} at the peak: 0=(24.5 m/s)2−2(9.80 m/s2)Hmax⁡0 = (24.5\text{ m/s})^2 - 2(9.80\text{ m/s}^2)H_{\max}

  3. Solve for maximum height: Hmax⁡=600.25 m2/s219.6 m/s2≈30.6 mH_{\max} = \frac{600.25\text{ m}^2/\text{s}^2}{19.6\text{ m/s}^2} \approx 30.6\text{ m}

Final answer

(a) Hmax⁡=30.6 mH_{\max} = 30.6\text{ m}; (b) ttotal=5.00 st_{\text{total}} = 5.00\text{ s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the three fundamental constant-acceleration kinematic equations alongside their units to avoid dropping exponents.

  • Always perform a quick mental dimensional analysis on formulas before substituting numerical values.

Lock it in

Similar question

01

A tennis ball is hit vertically upward from ground level with an initial speed of 19.6 m/s19.6\text{ m/s}. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, determine: (a) the maximum height reached, and (b) the time taken to reach that maximum height.

Answer

(a) Hmax⁡=v022g=(19.6)22(9.80)=19.6 mH_{\max} = \frac{v_0^2}{2g} = \frac{(19.6)^2}{2(9.80)} = 19.6\text{ m}. (b) tup=v0g=19.69.80=2.00 st_{\text{up}} = \frac{v_0}{g} = \frac{19.6}{9.80} = 2.00\text{ s}.

02

An arrow is fired vertically upward from the edge of a cliff 40.0 m40.0\text{ m} above a canyon floor with an initial velocity of 29.4 m/s29.4\text{ m/s}. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate: (a) the maximum height reached above the cliff edge, and (b) the speed of the arrow just before it hits the canyon floor.

Answer

(a) Hmax⁡=v022g=(29.4)22(9.80)=44.1 mH_{\max} = \frac{v_0^2}{2g} = \frac{(29.4)^2}{2(9.80)} = 44.1\text{ m} above the cliff edge. (b) Using v2=v02−2gΔyv^2 = v_0^2 - 2g\Delta y with Δy=−40.0 m\Delta y = -40.0\text{ m}: v2=(29.4)2−2(9.80)(−40.0)=864.36+784=1648.36 m2/s2  ⟹  v=1648.36≈40.6 m/sv^2 = (29.4)^2 - 2(9.80)(-40.0) = 864.36 + 784 = 1648.36\text{ m}^2/\text{s}^2 \implies v = \sqrt{1648.36} \approx 40.6\text{ m/s}.

03

A toy rocket is launched vertically from ground level. Its engine provides a constant upward acceleration of a=15.0 m/s2a = 15.0\text{ m/s}^2 for 2.00 s2.00\text{ s}, after which the engine burns out and the rocket enters free fall (g=9.80 m/s2g = 9.80\text{ m/s}^2). Find the absolute maximum height above the ground reached by the rocket.

Answer
  1. Powered stage: v1=at1=(15.0)(2.00)=30.0 m/sv_1 = a t_1 = (15.0)(2.00) = 30.0\text{ m/s}, height gained y1=12at12=12(15.0)(2.00)2=30.0 my_1 = \frac{1}{2}a t_1^2 = \frac{1}{2}(15.0)(2.00)^2 = 30.0\text{ m}. 2. Free-fall stage: additional height h2=v122g=30.022(9.80)≈45.92 mh_2 = \frac{v_1^2}{2g} = \frac{30.0^2}{2(9.80)} \approx 45.92\text{ m}. Total maximum height: Hmax⁡=y1+h2=30.0+45.92≈75.9 mH_{\max} = y_1 + h_2 = 30.0 + 45.92 \approx 75.9\text{ m}.
Loading workspace…