Resources

A test car of mass m=1.40×103 kgm = 1.40\times 10^3\text{ kg} accelerates from rest along a straight horizontal track. The engine delivers a constant mechanical power P=65.0 kWP = 65.0\text{ kW} to the drive wheels. Neglecting aerodynamic drag and rolling friction, calculate the time tt required for the car to accelerate from v1=12.0 m/sv_1 = 12.0\text{ m/s} to v2=26.0 m/sv_2 = 26.0\text{ m/s}, and find the instantaneous acceleration aa of the vehicle at the exact instant it reaches v2=26.0 m/sv_2 = 26.0\text{ m/s}.

Answer and steps

Final answer

t=5.73 st = 5.73\text{ s}, a=1.79 m/s2a = 1.79\text{ m/s}^2

Steps

Part 1: Calculate the Time Required to Accelerate

  1. Relate Power, Work, and Kinetic Energy: The mechanical power PP delivered to the wheels is constant, and non-conservative losses such as drag and friction are neglected. Therefore, the work WW done by the engine over time interval tt is: W=P⋅tW = P \cdot t

    According to the work-energy theorem, the total work done equals the change in kinetic energy of the car: W=ΔK=12mv22−12mv12W = \Delta K = \frac{1}{2}m v_2^2 - \frac{1}{2}m v_1^2

  2. Equate and Solve for tt: P⋅t=12m(v22−v12)P \cdot t = \frac{1}{2}m(v_2^2 - v_1^2) t=m(v22−v12)2Pt = \frac{m(v_2^2 - v_1^2)}{2P}
  3. Substitute the Given Values:

    • m=1.40×103 kgm = 1.40 \times 10^3\text{ kg}
    • P=65.0 kW=6.50×104 WP = 65.0\text{ kW} = 6.50 \times 10^4\text{ W}
    • v1=12.0 m/sv_1 = 12.0\text{ m/s}
    • v2=26.0 m/sv_2 = 26.0\text{ m/s}

    v22−v12=(26.0 m/s)2−(12.0 m/s)2=676 m2/s2−144 m2/s2=532 m2/s2v_2^2 - v_1^2 = (26.0\text{ m/s})^2 - (12.0\text{ m/s})^2 = 676\text{ m}^2/\text{s}^2 - 144\text{ m}^2/\text{s}^2 = 532\text{ m}^2/\text{s}^2

    t=(1.40×103 kg)(532 m2/s2)2(6.50×104 W)=7.448×105 J1.30×105 W≈5.73 st = \frac{(1.40 \times 10^3\text{ kg})(532\text{ m}^2/\text{s}^2)}{2(6.50 \times 10^4\text{ W})} = \frac{7.448 \times 10^5\text{ J}}{1.30 \times 10^5\text{ W}} \approx 5.73\text{ s}


Part 2: Calculate the Instantaneous Acceleration at v2v_2

  1. Relate Power, Force, and Velocity: The instantaneous power delivered by a propulsive force FF at speed vv is given by: P=F⋅v  ⟹  F=PvP = F \cdot v \implies F = \frac{P}{v}
  2. Apply Newton's Second Law: Since horizontal resistive forces are neglected, the net force on the car is simply the driving force FF: F=maF = m a

    Substituting this into the power equation yields: a=Fm=Pmva = \frac{F}{m} = \frac{P}{m v}

  3. Evaluate at v=v2=26.0 m/sv = v_2 = 26.0\text{ m/s}: a=6.50×104 W(1.40×103 kg)(26.0 m/s)=65.0×1033.64×104≈1.79 m/s2a = \frac{6.50 \times 10^4\text{ W}}{(1.40 \times 10^3\text{ kg})(26.0\text{ m/s})} = \frac{65.0 \times 10^3}{3.64 \times 10^4} \approx 1.79\text{ m/s}^2

Common Pitfall: Do not use constant-acceleration kinematic equations (such as v2=v1+atv_2 = v_1 + a t or a=v2−v1ta = \frac{v_2 - v_1}{t}). When power PP is constant, the accelerating force F=PvF = \frac{P}{v} decreases as speed increases, which means acceleration is not constant.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates kinetic energy change by squaring the difference of velocities (v₂ - v₁)² rather than the difference of squares (v₂² - v₁²), resulting in an incorrect acceleration time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δv=26.0−12.0=14.0 m/s  ⟹  W=12m(Δv)2=0.5⋅1400⋅(14.0)2=137200 J\Delta v = 26.0 - 12.0 = 14.0\text{ m/s} \implies W = \frac{1}{2}m(\Delta v)^2 = 0.5 \cdot 1400 \cdot (14.0)^2 = 137200\text{ J}

    Correct

    W=ΔK=12m(v22−v12)=12(1400 kg)[(26.0 m/s)2−(12.0 m/s)2]=7.448×105 JW = \Delta K = \frac{1}{2}m(v_2^2 - v_1^2) = \frac{1}{2}(1400\text{ kg})[(26.0\text{ m/s})^2 - (12.0\text{ m/s})^2] = 7.448 \times 10^5\text{ J}

    You calculated work as 12m(v2−v1)2\frac{1}{2}m(v_2 - v_1)^2. Because kinetic energy depends quadratically on speed, the change in kinetic energy is the difference of squares 12mv22−12mv12\frac{1}{2}m v_2^2 - \frac{1}{2}m v_1^2, not the square of the difference.

  2. Step 2

    t=WP=13720065000≈2.11 st = \frac{W}{P} = \frac{137200}{65000} \approx 2.11\text{ s}

    Correct

    t=WP=744800 J65000 W≈5.73 st = \frac{W}{P} = \frac{744800\text{ J}}{65000\text{ W}} \approx 5.73\text{ s}

    Your relationship t=WPt = \frac{W}{P} is completely correct, but substituting your earlier work value produced t≈2.11 st \approx 2.11\text{ s} instead of 5.73 s5.73\text{ s}.

  3. Step 3

    P=F⋅v2  ⟹  F=6500026.0=2500 N  ⟹  a=Fm=25001400≈1.79 m/s2P = F \cdot v_2 \implies F = \frac{65000}{26.0} = 2500\text{ N} \implies a = \frac{F}{m} = \frac{2500}{1400} \approx 1.79\text{ m/s}^2

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the work-energy connection W=P⋅tW = P \cdot t to relate power and time.

You correctly used P=FvP = F v and a=Fma = \frac{F}{m} to find the vehicle's instantaneous acceleration.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Difference of Squares vs. Square of Difference

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the change in kinetic energy ΔK=K2−K1\Delta K = K_2 - K_1 as 12m(v2−v1)2\frac{1}{2}m(v_2 - v_1)^2, conflating the difference of squares (v22−v12)(v_2^2 - v_1^2) with the square of the difference (Δv)2(\Delta v)^2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Work-Energy Theorem
  • ΔK=12mv22−12mv12=12m(v22−v12)\Delta K = \frac{1}{2}m v_2^2 - \frac{1}{2}m v_1^2 = \frac{1}{2}m(v_2^2 - v_1^2)

  • Always compute each kinetic energy separately or factor out 12m\frac{1}{2}m before subtracting the squared speeds; never square Δv\Delta v directly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the true work needed: W=ΔK=12(1400)(26.02−12.02)=700(676−144)=700(532)=7.448×105 JW = \Delta K = \frac{1}{2}(1400)(26.0^2 - 12.0^2) = 700(676 - 144) = 700(532) = 7.448 \times 10^5\text{ J}.

  2. Solve for acceleration time using constant power: t=WP=7.448×105 J6.50×104 W≈5.73 st = \frac{W}{P} = \frac{7.448 \times 10^5\text{ J}}{6.50 \times 10^4\text{ W}} \approx 5.73\text{ s}.

Final answer

t≈5.73 st \approx 5.73\text{ s}, a≈1.79 m/s2a \approx 1.79\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice computing kinetic energy changes across speed intervals by calculating vf2−vi2v_f^2 - v_i^2.

  • Remember that (a−b)2=a2−2ab+b2≠a2−b2(a - b)^2 = a^2 - 2ab + b^2 \neq a^2 - b^2, so work cannot equal 12m(Δv)2\frac{1}{2}m(\Delta v)^2.

OverviewACEpath Teacher's Diagnosis

02 The student assumes acceleration is constant under constant power and mistakenly uses standard kinematic formulas to calculate time and acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    F=Pv2=6500026.0=2500 N  ⟹  a=Fm=25001400≈1.79 m/s2F = \frac{P}{v_2} = \frac{65000}{26.0} = 2500\text{ N} \implies a = \frac{F}{m} = \frac{2500}{1400} \approx 1.79\text{ m/s}^2

  2. Step 2

    v2=v1+a⋅t  ⟹  t=26.0−12.01.79≈7.82 sv_2 = v_1 + a \cdot t \implies t = \frac{26.0 - 12.0}{1.79} \approx 7.82\text{ s}

    Correct

    P⋅t=12m(v22−v12)  ⟹  t=m(v22−v12)2P≈5.73 sP \cdot t = \frac{1}{2}m(v_2^2 - v_1^2) \implies t = \frac{m(v_2^2 - v_1^2)}{2P} \approx 5.73\text{ s}

    You applied v2=v1+atv_2 = v_1 + at, but that kinematic equation requires constant acceleration. Under constant power PP, force F(v)=PvF(v) = \frac{P}{v} and acceleration a(v)=Pmva(v) = \frac{P}{mv} decrease as speed increases. To find the time interval, you must apply the work-energy theorem: W=Pt=ΔKW = P t = \Delta K.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related mechanical power to driving force using P=FvP = Fv.

You applied Newton's second law to find the instantaneous acceleration at 26.0 m/s26.0\text{ m/s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Kinematics Misapplication

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed acceleration is uniform throughout the speed interval, overlooking that a constant power output implies a velocity-dependent propelling force F(v)=P/vF(v) = P/v and therefore non-uniform acceleration.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Acceleration Constancy
  • Kinematic equations (v=v0+atv = v_0 + at, Δx=v0t+12at2\Delta x = v_0 t + \frac{1}{2}at^2) apply only when acceleration is constant.

  • Since a(v)=Pmva(v) = \frac{P}{mv} varies inversely with velocity, do not use constant-acceleration formulas.

Use Work-Energy for Time under Constant Power
  • For constant power, total work is W=P⋅t=ΔK=12m(v22−v12)W = P \cdot t = \Delta K = \frac{1}{2}m(v_2^2 - v_1^2).

  • Equate PtPt to the change in kinetic energy and solve directly for tt.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the work-energy relation for constant power: W=P⋅t=ΔKW = P \cdot t = \Delta K

  2. Expand the change in kinetic energy: ΔK=12m(v22−v12)=12(1400 kg)((26.0 m/s)2−(12.0 m/s)2)=700⋅(676−144)=372400 J\Delta K = \frac{1}{2}m(v_2^2 - v_1^2) = \frac{1}{2}(1400\text{ kg})((26.0\text{ m/s})^2 - (12.0\text{ m/s})^2) = 700 \cdot (676 - 144) = 372400\text{ J}

  3. Divide by the mechanical power to find time: t=372400 J65000 W≈5.73 st = \frac{372400\text{ J}}{65000\text{ W}} \approx 5.73\text{ s}

Final answer

t=5.73 st = 5.73\text{ s}, a=1.79 m/s2a = 1.79\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why constant power produces non-constant acceleration (a∝1/va \propto 1/v).

  • Practice using P⋅t=ΔKP \cdot t = \Delta K whenever power is constant and you need to relate time and speed changes.

OverviewACEpath Teacher's Diagnosis

03 The student misuses average velocity across the speed interval to compute the instantaneous acceleration at v₂, leading to an incorrect acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔK=(12)m(v22−v12)=0.5⋅1400⋅(26.02−12.02)  ⟹  ΔK=700⋅(676−144)=372400 J\Delta K = \left(\frac{1}{2}\right) m\left(v_2^2 - v_1^2\right) = 0.5 \cdot 1400 \cdot \left(26.0^2 - 12.0^2\right) \implies \Delta K = 700 \cdot (676 - 144) = 372400\text{ J}

  2. Step 2

    t=ΔKP=37240065000≈5.73 st = \frac{\Delta K}{P} = \frac{372400}{65000} \approx 5.73\text{ s}

  3. Step 3

    vavg=12.0+26.02=19.0 m/s  ⟹  F=Pvavg=6500019.0≈3421 Nv_{\text{avg}} = \frac{12.0 + 26.0}{2} = 19.0\text{ m/s} \implies F = \frac{P}{v_{\text{avg}}} = \frac{65000}{19.0} \approx 3421\text{ N}

    Correct

    F2=Pv2=6.50×104 W26.0 m/s=2500 NF_2 = \frac{P}{v_2} = \frac{6.50 \times 10^4\text{ W}}{26.0\text{ m/s}} = 2500\text{ N}

    To determine the instantaneous force and acceleration at v2=26.0 m/sv_2 = 26.0\text{ m/s}, you must use the instantaneous speed v2v_2 directly in F=PvF = \frac{P}{v}. Using an average velocity computes an average property over the interval rather than the state at the exact moment the car reaches v2v_2.

  4. Step 4

    a=Fm=34211400≈2.44 m/s2a = \frac{F}{m} = \frac{3421}{1400} \approx 2.44\text{ m/s}^2

    Correct

    a2=F2m=2500 N1.40×103 kg≈1.79 m/s2a_2 = \frac{F_2}{m} = \frac{2500\text{ N}}{1.40 \times 10^3\text{ kg}} \approx 1.79\text{ m/s}^2

    Newton's second law was applied properly, but the numerical acceleration inherits the incorrect force from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You related work and mechanical power correctly via W=P⋅tW = P \cdot t.

You computed the change in kinetic energy accurately.

You arrived at the correct total time of 5.73 s5.73\text{ s}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Instantaneous vs. Average Velocity Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You substituted the interval average velocity vavgv_{\text{avg}} into the power equation P=FvP = F v when evaluating instantaneous acceleration at a specific velocity v2v_2, confusing an interval-wide average with an instantaneous kinematic quantity.

REASONING PATH
Your ACEpath teacher’s suggested approach
Instantaneous Force from Power
  • At any exact instant, P=F⋅v  ⟹  F=PvP = F \cdot v \implies F = \frac{P}{v}, where vv is the vehicle's speed at that specific instant.

  • Plug the specific instant's speed (v2=26.0 m/sv_2 = 26.0\text{ m/s}) directly into F=PvF = \frac{P}{v} instead of computing an average velocity.

Non-Constant Acceleration under Constant Power
  • When power PP is constant, a(v)=Pmva(v) = \frac{P}{m v} decreases as vv increases, so acceleration is not constant and v1+v22\frac{v_1 + v_2}{2} does not represent time-averaged velocity.

  • Avoid constant-acceleration kinematic formulas or average velocity shortcuts when analyzing motion under constant power.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the instantaneous speed at the specified instant: v2=26.0 m/sv_2 = 26.0\text{ m/s}.

  2. Compute the instantaneous driving force at that speed: F=Pv2=6.50×104 W26.0 m/s=2500 NF = \frac{P}{v_2} = \frac{6.50 \times 10^4\text{ W}}{26.0\text{ m/s}} = 2500\text{ N}.

  3. Apply Newton's second law to find the instantaneous acceleration: a=Fm=2500 N1.40×103 kg≈1.79 m/s2a = \frac{F}{m} = \frac{2500\text{ N}}{1.40 \times 10^3\text{ kg}} \approx 1.79\text{ m/s}^2.

Final answer

t≈5.73 st \approx 5.73\text{ s}, a≈1.79 m/s2a \approx 1.79\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between instantaneous quantities (P=FvP = F v) and average quantities over a time interval.

  • Practice deriving a(v)=Pmva(v) = \frac{P}{m v} directly for vehicles operating under constant engine output.

Lock it in

Similar question

01

A 1200 kg1200\text{ kg} electric vehicle accelerates from 10.0 m/s10.0\text{ m/s} to 30.0 m/s30.0\text{ m/s} under a constant net power of 40.0 kW40.0\text{ kW}. Find the time required.

Answer

t=12.0 st = 12.0\text{ s}. Steps: ΔK=12(1200)(302−102)=600(900−100)=4.80×105 J\Delta K = \frac{1}{2}(1200)(30^2 - 10^2) = 600(900 - 100) = 4.80 \times 10^5\text{ J}. Then t=ΔKP=4.80×105 J40.0×103 W=12.0 st = \frac{\Delta K}{P} = \frac{4.80 \times 10^5\text{ J}}{40.0 \times 10^3\text{ W}} = 12.0\text{ s}.

02

A locomotive of mass 5.0×104 kg5.0 \times 10^4\text{ kg} delivers a constant mechanical power of 1.5 MW1.5\text{ MW}. How much time does it take to speed up from 15 m/s15\text{ m/s} to 25 m/s25\text{ m/s}, and what is its acceleration at 25 m/s25\text{ m/s}?

Answer

t≈6.67 st \approx 6.67\text{ s}, a=1.20 m/s2a = 1.20\text{ m/s}^2. Steps: ΔK=12(5.0×104)(625−225)=1.0×107 J\Delta K = \frac{1}{2}(5.0 \times 10^4)(625 - 225) = 1.0 \times 10^7\text{ J}; t=1.0×1071.5×106≈6.67 st = \frac{1.0 \times 10^7}{1.5 \times 10^6} \approx 6.67\text{ s}. For acceleration: a=Pmv=1.5×106(5.0×104)(25)=1.20 m/s2a = \frac{P}{m v} = \frac{1.5 \times 10^6}{(5.0 \times 10^4)(25)} = 1.20\text{ m/s}^2.

03

A boat engine provides constant power PP. It takes 4.0 s4.0\text{ s} to accelerate the boat from rest to speed vv. Neglecting resistance, how much additional time is required to accelerate from vv to 2v2v?

Answer

Δt=12.0 s\Delta t = 12.0\text{ s}. Steps: W1=12mv2=P(4.0)W_1 = \frac{1}{2}m v^2 = P(4.0), so P=mv28P = \frac{m v^2}{8}. The work to go from vv to 2v2v is W2=12m((2v)2−v2)=32mv2=3W1W_2 = \frac{1}{2}m((2v)^2 - v^2) = \frac{3}{2}m v^2 = 3 W_1. Therefore, Δt=3(4.0 s)=12.0 s\Delta t = 3(4.0\text{ s}) = 12.0\text{ s}.

Loading workspace…