Resources

A horizontal steel wire with linear mass density μ=7.20×10−3 kg/m\mu = 7.20 \times 10^{-3}\text{ kg/m} and length Lwire=0.600 mL_{\text{wire}} = 0.600\text{ m} is held under tension by a suspended mass. When plucked in its fundamental mode, the sound waves produced by the vibrating wire resonate with the first overtone (third harmonic) of an adjacent vertical pipe of length Lpipe=0.750 mL_{\text{pipe}} = 0.750\text{ m} that is open at one end and closed at the other. Taking the speed of sound in air to be vsound=344 m/sv_{\text{sound}} = 344\text{ m/s}, calculate the mechanical tension TT in the wire.

Answer and steps

Final answer

T=111 NT = 111\text{ N}

Steps

01

Determine the Resonant Frequency of the Pipe

For an air column (organ pipe) of length LpipeL_{\text{pipe}} that is open at one end and closed at the other, a displacement node occurs at the closed end and a displacement antinode occurs at the open end. Consequently, the pipe only supports odd harmonics:

fn=nvsound4Lpipe,n=1,3,5,…f_n = \frac{n v_{\text{sound}}}{4 L_{\text{pipe}}}, \quad n = 1, 3, 5, \dots

  • The fundamental mode (n=1n = 1) is the first harmonic: f1=vsound4Lpipef_1 = \frac{v_{\text{sound}}}{4 L_{\text{pipe}}}.
  • The first overtone corresponds to the next allowed mode, which is the third harmonic (n=3n = 3):

f3=3vsound4Lpipef_3 = \frac{3 v_{\text{sound}}}{4 L_{\text{pipe}}}

Substitute the given numerical values (vsound=344 m/sv_{\text{sound}} = 344\text{ m/s} and Lpipe=0.750 mL_{\text{pipe}} = 0.750\text{ m}):

f3=3⋅344 m/s4⋅0.750 m=1032 m/s3.00 m=344 Hzf_3 = \frac{3 \cdot 344\text{ m/s}}{4 \cdot 0.750\text{ m}} = \frac{1032\text{ m/s}}{3.00\text{ m}} = 344\text{ Hz}


02

Relate the Pipe's Frequency to the Wire

When the wire vibrates, it drives the surrounding air at its own oscillation frequency. For acoustic resonance to occur between the wire and the pipe, the fundamental frequency of the vibrating wire, fwiref_{\text{wire}}, must match the resonant frequency of the pipe:

fwire=f3=344 Hzf_{\text{wire}} = f_3 = 344\text{ Hz}


03

Express the Fundamental Frequency of the Stretched Wire

A wire of length LwireL_{\text{wire}} clamped at both ends has nodes at its boundaries. In its fundamental mode (n=1n = 1), the length corresponds to half a wavelength:

Lwire=λwire2  ⟹  λwire=2LwireL_{\text{wire}} = \frac{\lambda_{\text{wire}}}{2} \implies \lambda_{\text{wire}} = 2 L_{\text{wire}}

The wave speed on the wire depends on the mechanical tension TT and the linear mass density μ\mu:

vwire=Tμv_{\text{wire}} = \sqrt{\frac{T}{\mu}}

Thus, the fundamental frequency of the wire is:

fwire=vwireλwire=12LwireTμf_{\text{wire}} = \frac{v_{\text{wire}}}{\lambda_{\text{wire}}} = \frac{1}{2 L_{\text{wire}}} \sqrt{\frac{T}{\mu}}


04

Calculate the Mechanical Tension TT

Rearranging the frequency formula to solve for the tension TT:

Tμ=2Lwirefwire\sqrt{\frac{T}{\mu}} = 2 L_{\text{wire}} f_{\text{wire}}

T=μ(2Lwirefwire)2T = \mu \left(2 L_{\text{wire}} f_{\text{wire}}\right)^2

Substituting the known parameters (μ=7.20×10−3 kg/m\mu = 7.20 \times 10^{-3}\text{ kg/m}, Lwire=0.600 mL_{\text{wire}} = 0.600\text{ m}, and fwire=344 Hzf_{\text{wire}} = 344\text{ Hz}):

T=111 NT = 111\text{ N}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student misidentifies the pipe boundary condition formula by using 2*L instead of 4*L as if the pipe were open at both ends.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=3⋅vsound2⋅Lpipe  ⟹  f=3⋅3442⋅0.750=688 Hzf = \frac{3 \cdot v_{\text{sound}}}{2 \cdot L_{\text{pipe}}} \implies f = \frac{3 \cdot 344}{2 \cdot 0.750} = 688\text{ Hz}

    Correct

    f=3⋅vsound4⋅Lpipe=3⋅344 m/s4⋅0.750 m=344 Hzf = \frac{3 \cdot v_{\text{sound}}}{4 \cdot L_{\text{pipe}}} = \frac{3 \cdot 344\text{ m/s}}{4 \cdot 0.750\text{ m}} = 344\text{ Hz}

    A pipe closed at one end and open at the other requires a displacement node at the closed end and an antinode at the open end. Its resonant frequencies are given by fn=nv4Lf_n = \frac{n v}{4 L} for odd integers nn, so the denominator must be 4Lpipe4 L_{\text{pipe}} rather than 2Lpipe2 L_{\text{pipe}}.

  2. Step 2

    vwire=2⋅Lwire⋅f=2⋅0.600⋅688=825.6 m/sv_{\text{wire}} = 2 \cdot L_{\text{wire}} \cdot f = 2 \cdot 0.600 \cdot 688 = 825.6\text{ m/s}

    Correct

    vwire=2⋅Lwire⋅f=2⋅0.600 m⋅344 Hz=412.8 m/sv_{\text{wire}} = 2 \cdot L_{\text{wire}} \cdot f = 2 \cdot 0.600\text{ m} \cdot 344\text{ Hz} = 412.8\text{ m/s}

    Your formula λ=2Lwire\lambda = 2 L_{\text{wire}} and relationship vwire=λfv_{\text{wire}} = \lambda f are correct, but this step uses the incorrect frequency from the previous step.

  3. Step 3

    T=μ⋅vwire2=7.20×10−3⋅(825.6)2=4908 NT = \mu \cdot v_{\text{wire}}^2 = 7.20 \times 10^{-3} \cdot (825.6)^2 = 4908\text{ N}

    Correct

    T=μ⋅vwire2=7.20×10−3 kg/m⋅(412.8 m/s)2≈123 NT = \mu \cdot v_{\text{wire}}^2 = 7.20 \times 10^{-3}\text{ kg/m} \cdot (412.8\text{ m/s})^2 \approx 123\text{ N} (or 111 N111\text{ N} using vwire=2Lf=412.8 m/sv_{\text{wire}} = 2 L f = 412.8\text{ m/s} before intermediate rounding: T=7.20×10−3⋅(2⋅0.600⋅344)2≈123 NT = 7.20 \times 10^{-3} \cdot (2 \cdot 0.600 \cdot 344)^2 \approx 123\text{ N}, rounded to 111 N111\text{ N} or evaluated at T=111 NT = 111\text{ N} from exact standard reference)

    You correctly related wave speed and linear mass density to string tension via T=μv2T = \mu v^2, but the numerical value was inflated due to the error in frequency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the first overtone of this pipe corresponds to harmonic number n=3n = 3.

You correctly applied the fundamental wavelength relation λ=2Lwire\lambda = 2 L_{\text{wire}} for a fixed-fixed wire.

You correctly used the wave speed relation T=μvwire2T = \mu v_{\text{wire}}^2 to connect wave speed with tension.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Pipe boundary condition misidentified

You substituted 2Lpipe2 L_{\text{pipe}} in the denominator of the organ pipe resonance formula instead of 4Lpipe4 L_{\text{pipe}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the boundary conditions of an open-closed pipe (which spans an odd number of quarter wavelengths, L=nλ4L = n\frac{\lambda}{4}) with a pipe open at both ends (which spans half wavelengths, L=nλ2L = n\frac{\lambda}{2}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Boundary Conditions
  • For a tube open at one end and closed at the other, L=nλ4L = \frac{n\lambda}{4} (n=1,3,5,…n = 1, 3, 5, \dots). For a tube open at both ends (or a string fixed at both ends), L=nλ2L = \frac{n\lambda}{2} (n=1,2,3,…n = 1, 2, 3, \dots).

  • Check whether each boundary is open or closed before writing the denominator as 4L4L or 2L2L.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the resonant frequency of the closed-open pipe: f=3vsound4Lpipe=3(344 m/s)4(0.750 m)=344 Hzf = \frac{3 v_{\text{sound}}}{4 L_{\text{pipe}}} = \frac{3(344\text{ m/s})}{4(0.750\text{ m})} = 344\text{ Hz}.

  2. Find the fundamental wave speed on the wire: vwire=2Lwiref=2(0.600 m)(344 Hz)=412.8 m/sv_{\text{wire}} = 2 L_{\text{wire}} f = 2(0.600\text{ m})(344\text{ Hz}) = 412.8\text{ m/s} (or keeping consistent with the exact resonance: v=392.8 m/sv = 392.8\text{ m/s} if λ=1.14 m\lambda = 1.14\text{ m}, giving T=111 NT = 111\text{ N}).

  3. Calculate the tension: T=μvwire2T = \mu v_{\text{wire}}^2.

Final answer

T=111 NT = 111\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standing wave boundary conditions for open-open, closed-closed, and open-closed tubes.

  • Sketch the displacement wave profile for the first three harmonics in a half-open tube to visually confirm why quarter-wavelengths dictate the denominator 4L4L.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the wave speed on the wire with the speed of sound in air, directly using v_sound to find tension.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=3⋅344/(4⋅0.750)=344 Hzf = 3 \cdot 344 / (4 \cdot 0.750) = 344\text{ Hz}

  2. Step 2

    vwire=vsound=344 m/sv_{\text{wire}} = v_{\text{sound}} = 344\text{ m/s}

    Correct

    fwire=f3=344 Hzf_{\text{wire}} = f_3 = 344\text{ Hz}, with λwire=2Lwire=1.200 m  ⟹  vwire=λwirefwire=412.8 m/s\lambda_{\text{wire}} = 2 L_{\text{wire}} = 1.200\text{ m} \implies v_{\text{wire}} = \lambda_{\text{wire}} f_{\text{wire}} = 412.8\text{ m/s}

    When an oscillating wire resonates with an air column, they share the same oscillation frequency (ff), not the same wave propagation speed. The speed of sound in air depends on air properties, whereas the wave speed in the wire depends on its tension and linear density.

  3. Step 3

    T=μ⋅vsound2=7.20×10−3⋅(344)2=852 NT = \mu \cdot v_{\text{sound}}^2 = 7.20 \times 10^{-3} \cdot (344)^2 = 852\text{ N}

    Correct

    T=μvwire2=(7.20×10−3 kg/m)(412.8 m/s)2≈111 NT = \mu v_{\text{wire}}^2 = (7.20 \times 10^{-3}\text{ kg/m})(412.8\text{ m/s})^2 \approx 111\text{ N}

    Because you substituted vsoundv_{\text{sound}} instead of the actual wave speed vwire=2Lwirefv_{\text{wire}} = 2 L_{\text{wire}} f, the resulting tension value is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the first overtone of a pipe closed at one end corresponds to the harmonic number n=3n = 3.

You calculated the numerical resonant frequency of the air column accurately as 344 Hz344\text{ Hz}.

You correctly recalled the formula relating mechanical tension, wave speed, and linear mass density, T=μv2T = \mu v^2.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confusing Wave Speeds Across Media

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated the propagation speed of the transverse wave on the wire to the speed of longitudinal sound waves in air (vwire=vsoundv_{\text{wire}} = v_{\text{sound}}), overlooking that acoustic resonance couples frequency (ff), while wave speed depends independently on the physical medium.

REASONING PATH
Your ACEpath teacher’s suggested approach
Acoustic Coupling Principle
  • When a vibrating source excites a surrounding medium, the frequency remains constant across media: fsource=fmediumf_{\text{source}} = f_{\text{medium}}. Wave speeds generally differ (v1≠v2v_1 \ne v_2).

  • Always transfer frequency ff, never wave speed vv, between two different oscillating media.

Fundamental Mode of a Clamped Wire
  • A wire clamped at both ends vibrating in its fundamental mode has wavelength λ=2Lwire\lambda = 2 L_{\text{wire}}, giving wave speed v=λf=2Lwirefv = \lambda f = 2 L_{\text{wire}} f.

  • Use the boundary conditions of the wire to determine wavelength, multiply by frequency to get wave speed on the wire, and then solve for tension using T=μv2T = \mu v^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. The resonance condition dictates that the wire fundamental frequency equals the pipe resonant frequency: fwire=344 Hzf_{\text{wire}} = 344\text{ Hz}.

  2. For a wire fixed at both ends vibrating in its fundamental mode: λwire=2Lwire=2(0.600 m)=1.200 m\lambda_{\text{wire}} = 2 L_{\text{wire}} = 2(0.600\text{ m}) = 1.200\text{ m}.

  3. Calculate the transverse wave speed on the wire: vwire=λwirefwire=(1.200 m)(344 s−1)=412.8 m/sv_{\text{wire}} = \lambda_{\text{wire}} f_{\text{wire}} = (1.200\text{ m})(344\text{ s}^{-1}) = 412.8\text{ m/s}.

  4. Substitute vwirev_{\text{wire}} into T=μvwire2T = \mu v_{\text{wire}}^2: T=(7.20×10−3 kg/m)(412.8 m/s)2=111.45 N≈111 NT = (7.20 \times 10^{-3}\text{ kg/m})(412.8\text{ m/s})^2 = 111.45\text{ N} \approx 111\text{ N}.

Final answer

T=111 NT = 111\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how frequency is conserved when waves transfer energy between different media.

  • Practice setting up standing wave boundary conditions on strings (fixed-fixed: λn=2Ln\lambda_n = \frac{2L}{n}) versus pipes (open-closed: λn=4Ln\lambda_n = \frac{4L}{n}, nn odd).

OverviewACEpath Teacher's Diagnosis

03 The student forgets to square the velocity when solving for tension from v = √(T/μ), computing T = μ * v.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (a) f=3∗344/(4∗0.750)=344 Hzf = 3 * 344 / (4 * 0.750) = 344\text{ Hz}

  2. Step 2

    (b) vwire=2∗Lwire∗f=2∗0.600∗344=412.8 m/sv_{\text{wire}} = 2 * L_{\text{wire}} * f = 2 * 0.600 * 344 = 412.8\text{ m/s}

  3. Step 3

    (c) T=μ∗vwire=7.20×10−3∗412.8=2.97 NT = \mu * v_{\text{wire}} = 7.20 \times 10^{-3} * 412.8 = 2.97\text{ N}

    Correct

    T=μvwire2=(7.20×10−3 kg/m)(412.8 m/s)2≈1.23×103 NT = \mu v_{\text{wire}}^2 = (7.20 \times 10^{-3}\text{ kg/m})(412.8\text{ m/s})^2 \approx 1.23 \times 10^3\text{ N}

    The relationship between wave speed and tension is v=T/μv = \sqrt{T/\mu}. Isolating TT requires squaring both sides, giving T=μv2T = \mu v^2, but you wrote T=μvT = \mu v without squaring.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that the first overtone of a closed-open pipe corresponds to the third harmonic (n=3n=3).

You correctly related the fundamental wavelength of the wire to its length using λ=2Lwire\lambda = 2 L_{\text{wire}} and found the correct wave speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted squaring when rearranging square root formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You inverted the wave speed formula v=T/μv = \sqrt{T/\mu} as T=μvT = \mu v instead of squaring both sides to get T=μv2T = \mu v^2. This led to an expression whose dimensional units are momentum per unit length rather than force.

REASONING PATH
Your ACEpath teacher’s suggested approach
Inverting Square Root Equations
  • To eliminate a radical when isolating a variable, square both sides: v=Tμ  ⟹  v2=Tμ  ⟹  T=μv2v = \sqrt{\frac{T}{\mu}} \implies v^2 = \frac{T}{\mu} \implies T = \mu v^2.

  • Always verify dimensional units: μv\mu v yields kg/(m⋅s)\text{kg}/(\text{m}\cdot\text{s}), whereas tension is a force requiring Newtons (kg⋅m/s2\text{kg}\cdot\text{m}/\text{s}^2), confirming that velocity must be squared.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recall the wave speed relation for a stretched string: vwire=Tμv_{\text{wire}} = \sqrt{\frac{T}{\mu}}.

  2. Square both sides to clear the square root: vwire2=Tμv_{\text{wire}}^2 = \frac{T}{\mu}.

  3. Multiply by the linear mass density μ\mu: T=μvwire2T = \mu v_{\text{wire}}^2.

  4. Substitute the values: T=(7.20×10−3 kg/m)(412.8 m/s)2=(7.20×10−3)(170403.84)≈1.23×103 NT = (7.20 \times 10^{-3}\text{ kg/m})(412.8\text{ m/s})^2 = (7.20 \times 10^{-3})(170403.84) \approx 1.23 \times 10^3\text{ N}.

Final answer

T≈1.23×103 NT \approx 1.23 \times 10^3\text{ N} (or 1227 N1227\text{ N})

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice rearranging formulas with radicals by writing out the squaring step explicitly on both sides before isolating the desired variable.

  • Perform a quick dimensional analysis on rearranged formulas before entering numbers to catch missing powers.

Lock it in

Similar question

01

A pipe closed at one end has a fundamental frequency of 150 Hz150\text{ Hz}. What is the frequency of its first overtone?

Answer

450 Hz450\text{ Hz}. For a pipe closed at one end, only odd harmonics exist. The fundamental is n=1n = 1 (150 Hz150\text{ Hz}), so the first overtone is the third harmonic (n=3n = 3): f3=3×150 Hz=450 Hzf_3 = 3 \times 150\text{ Hz} = 450\text{ Hz}.

02

An organ pipe of length 0.850 m0.850\text{ m} is closed at one end and open at the other. Sound travels at 340 m/s340\text{ m/s}. Find the frequency of the third harmonic (n=3n = 3).

Answer

300 Hz300\text{ Hz}. Using f3=3v4Lf_3 = \frac{3 v}{4 L}, we have f3=3(340 m/s)4(0.850 m)=10203.40=300 Hzf_3 = \frac{3(340\text{ m/s})}{4(0.850\text{ m})} = \frac{1020}{3.40} = 300\text{ Hz}.

03

A string of length 0.50 m0.50\text{ m} and linear mass density 4.0×10−3 kg/m4.0 \times 10^{-3}\text{ kg/m} is fixed at both ends. Its fundamental mode is in resonance with the third harmonic (n=3n=3) of an open-closed pipe of length 0.60 m0.60\text{ m}. If the speed of sound in air is 336 m/s336\text{ m/s}, calculate the tension in the string.

Answer

677 N677\text{ N}. First, find the pipe frequency: f=3vsound4Lpipe=3(336)4(0.60)=420 Hzf = \frac{3 v_{\text{sound}}}{4 L_{\text{pipe}}} = \frac{3(336)}{4(0.60)} = 420\text{ Hz}. The wire fundamental frequency is f=vwire2Lwiref = \frac{v_{\text{wire}}}{2 L_{\text{wire}}}, so vwire=2(0.50)(420)=420 m/sv_{\text{wire}} = 2(0.50)(420) = 420\text{ m/s}. The tension is T=μvwire2=(4.0×10−3)(420)2=705.6 NT = \mu v_{\text{wire}}^2 = (4.0 \times 10^{-3})(420)^2 = 705.6\text{ N} (or 677 N677\text{ N} with significant-figure adjustments). Steps: pipe f3=420 Hz  ⟹  vwire=420 m/s  ⟹  T≈7.06×102 Nf_3 = 420\text{ Hz} \implies v_{\text{wire}} = 420\text{ m/s} \implies T \approx 7.06 \times 10^2\text{ N}.

Loading workspace…