Resources
Two synchronized loudspeakers in an outdoor testing field are positioned along the -axis at and , both facing the positive -direction and vibrating in phase at . An acoustic detector moves along a large semi-circular arc of radius centered at the origin . Assuming the speed of sound is , determine the smallest non-zero angular position (measured relative to the positive -axis toward the positive -axis) where the detector measures a local minimum in sound intensity.
Answer and steps
Final answer
Steps
Calculate the Wavelength of the Sound Wave
The wavelength of the sound emitted by each speaker is related to the speed of sound and the frequency by the wave speed formula:
Substitute the given values:
Identify the Condition for Destructive Interference
The two speakers are identical and vibrate in phase. A local minimum in sound intensity occurs when the waves arriving at the detector interfere destructively. This happens when the path length difference between the two sources is a half-integer multiple of the wavelength:
To find the smallest non-zero angle , we consider the first minimum, corresponding to :
Relate Path Difference to Angular Position
The distance between the two sources along the -axis is:
Because the radius of the detector's path () is significantly larger than the speaker separation (), we can use the far-field approximation. For an angle measured from the positive -axis toward the positive -axis, the path difference between the waves traveling to the detector is:
Solve for the Angle
Equating the path difference to the destructive interference condition gives:
Substitute the values of and :
Taking the inverse sine:
Typical errors
01 The student confuses the condition for destructive interference with constructive interference, using d sin θ = λ instead of d sin θ = λ / 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
for the first minimum ()
For two sources vibrating in phase, destructive interference (intensity minimum) occurs when the path difference is a half-integer multiple of the wavelength, . Setting corresponds to the first non-zero intensity maximum instead.
- Step 3Correct
Your algebraic rearrangement and calculation were carried out consistently with your formula, but the result is incorrect due to using the maximum condition from Step 2.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the sound wavelength from the wave speed and frequency.
You accurately identified the speaker separation along the -axis.
You correctly set up the far-field path difference relationship and evaluated the inverse sine function.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou equated the path difference to an integer wavelength () for a local minimum, confusing the condition for destructive interference with the condition for constructive interference.
REASONING PATH
Your ACEpath teacher’s suggested approach- Interference Conditions for In-Phase Sources
For two coherent sources vibrating in phase: maxima (constructive) occur when , while minima (destructive) occur when , where .
Always verify whether the problem asks for an intensity maximum or minimum before writing down the path difference formula.
CORRECTED PATH
ACEpath Teacher's DemonstrationState the condition for the first destructive interference minimum (): .
Solve for : .
Calculate the angle: .
02 The student uses the coordinate of one speaker (1.50 m) as the source separation d rather than the total distance between both speakers (3.00 m).
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
You set the source separation to the coordinate of the upper speaker rather than the total distance between the two speakers.
- Step 3
d\sin = = 0.333 \sin = = 0.2222
Correctd\sin = \sin = = 0.1111
You correctly identified the condition for the first intensity minimum (), but your calculation of carried forward the incorrect separation distance .
- Step 4Correct
Your final inverse sine evaluation followed logically from your previous step, but resulted in an incorrect angle due to the propagated value of .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly determined the wavelength from the wave speed and frequency.
You correctly identified the path difference condition for the first destructive interference minimum as .
You correctly applied the far-field path difference formula and evaluated the inverse sine function.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakenone
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou took the -coordinate of the top speaker () as the source separation , forgetting to subtract the position of the bottom speaker () to obtain the full distance between sources.
REASONING PATH
Your ACEpath teacher’s suggested approach- Distance Between Coordinates
For two points along an axis at coordinates and , the separation is , not just the value of .
Always write out and substitute both signs carefully before entering into an interference equation.
CORRECTED PATH
ACEpath Teacher's Demonstration03 The student misidentifies the angle in the path difference formula as measured from the y-axis rather than the x-axis, using d cos θ = λ / 2.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
The angle is measured from the positive -axis, which is the perpendicular bisector of the two speakers along the -axis. Because the path difference is zero along the -axis (), the far-field path difference is given by , not .
- Step 3Correct
Your algebraic isolation and inverse trigonometric evaluation followed your step 2 formula consistently, but the value is incorrect due to using cosine instead of sine.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly calculated the wavelength from wave speed and frequency.
You identified that the first destructive interference minimum requires a path difference of .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou selected the cosine function rather than the sine function for path difference because you treated as the angle measured along the line connecting the sources (the -axis) instead of from the broadside axis of symmetry (the -axis).
REASONING PATH
Your ACEpath teacher’s suggested approach- Check the Broadside Baseline
At along the perpendicular bisector (-axis), both sources are equidistant, meaning path difference must be zero: .
Test your geometric formula at : (valid), whereas (invalid for an angle measured from the broadside axis).
CORRECTED PATH
ACEpath Teacher's DemonstrationSet the far-field path difference relative to the -axis: .
Equate this to the condition for the first destructive minimum: .
Substitute and : .
Compute the angle: .
Lock it in
For two identical, in-phase sources, what path difference produces completely destructive interference (an intensity minimum)?
, where . The waves arrive half a cycle out of phase, so crest meets trough and cancels out.
Similar question
Two synchronized in-phase sound sources are placed on the -axis at and . They emit sound with a frequency of into air where . Find the smallest non-zero angle (relative to the -axis) where destructive interference occurs far from the sources.
Answer
Wavelength . Source separation . For the first destructive interference minimum, . Therefore, .
Two in-phase radio antennas separated by transmit at . Along a circular path far from the antennas, find the angular positions of both the first intensity minimum and the first non-zero intensity maximum in the first quadrant ().
Answer
First minimum: . First maximum: .
Two speakers driven by the same oscillator are separated by along the -axis. A microphone located on a distant circular arc in the -plane detects the second local intensity minimum at an angle of from the -axis. Determine the wavelength and frequency of the sound wave (take ).
Answer
The second minimum corresponds to , so the path difference is . From far-field geometry, . The frequency is .