Resources

One mole (NA=6.022×1023N_A = 6.022 \times 10^{23} particles) of liquid water has a density of ρL=1.00 g/cm3\rho_L = 1.00\text{ g/cm}^3 and a molar mass of M=18.02 g/molM = 18.02\text{ g/mol}. When completely vaporized at T=373.15 KT = 373.15\text{ K} and constant external pressure P=1.013×105 PaP = 1.013 \times 10^5\text{ Pa}, the water vapor behaves as an ideal gas. (a) Assuming each molecule in the liquid state occupies an effective cubic volume vL=dL3v_L = d_L^3, calculate the average intermolecular distance dLd_L in the liquid state. (b) Using the ideal gas law PVG=nRTP V_G = n R T (where R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}) and assuming the vapor molecules are uniformly distributed such that each occupies a volume vG=dG3v_G = d_G^3, calculate the average intermolecular distance dGd_G in the gas phase. (c) Calculate the ratio dGdL\frac{d_G}{d_L} demonstrating the structural expansion upon vaporization.

Answer and steps

Final answer

(a) dL≈3.10×10−10 m=0.310 nmd_L \approx 3.10 \times 10^{-10}\text{ m} = 0.310\text{ nm}; (b) dG≈3.70×10−9 m=3.70 nmd_G \approx 3.70 \times 10^{-9}\text{ m} = 3.70\text{ nm}; (c) dGdL≈11.9\frac{d_G}{d_L} \approx 11.9.

Steps

Part (a): Average Intermolecular Distance in Liquid Water

  1. Calculate the molar volume of the liquid (VLV_L): The volume occupied by one mole of liquid water is given by: VL=MρL=18.02 g/mol1.00 g/cm3=18.02 cm3/mol=1.802×10−5 m3/molV_L = \frac{M}{\rho_L} = \frac{18.02\text{ g/mol}}{1.00\text{ g/cm}^3} = 18.02\text{ cm}^3/\text{mol} = 1.802 \times 10^{-5}\text{ m}^3/\text{mol}
  2. Determine the volume per molecule (vLv_L): Dividing the molar volume by Avogadro's number NAN_A: vL=VLNA=1.802×10−5 m36.022×1023≈2.992×10−29 m3v_L = \frac{V_L}{N_A} = \frac{1.802 \times 10^{-5}\text{ m}^3}{6.022 \times 10^{23}} \approx 2.992 \times 10^{-29}\text{ m}^3
  3. Calculate the average separation distance (dLd_L): Assuming each molecule occupies an effective cubic cell of volume vL=dL3v_L = d_L^3: dL=vL3=(2.992×10−29 m3)1/3≈3.10×10−10 m=0.310 nmd_L = \sqrt[3]{v_L} = \left(2.992 \times 10^{-29}\text{ m}^3\right)^{1/3} \approx 3.10 \times 10^{-10}\text{ m} = 0.310\text{ nm}

Part (b): Average Intermolecular Distance in Water Vapor

  1. Calculate the molar volume of the gas (VGV_G): Applying the ideal gas law PVG=nRTP V_G = n R T for n=1 moln = 1\text{ mol}: VG=nRTP=(1 mol)(8.314 J/(mol⋅K))(373.15 K)1.013×105 Pa≈0.03063 m3V_G = \frac{n R T}{P} = \frac{(1\text{ mol})(8.314\text{ J/(mol}\cdot\text{K)})(373.15\text{ K})}{1.013 \times 10^5\text{ Pa}} \approx 0.03063\text{ m}^3
  2. Determine the volume per molecule (vGv_G): vG=VGNA=0.03063 m36.022×1023≈5.086×10−26 m3v_G = \frac{V_G}{N_A} = \frac{0.03063\text{ m}^3}{6.022 \times 10^{23}} \approx 5.086 \times 10^{-26}\text{ m}^3
  3. Calculate the average separation distance (dGd_G): Assuming a uniform cubic cell model where vG=dG3v_G = d_G^3: dG=vG3=(5.086×10−26 m3)1/3≈3.70×10−9 m=3.70 nmd_G = \sqrt[3]{v_G} = \left(5.086 \times 10^{-26}\text{ m}^3\right)^{1/3} \approx 3.70 \times 10^{-9}\text{ m} = 3.70\text{ nm}

Part (c): Ratio of Intermolecular Distances

Comparing the average spacing between molecules in the vapor phase to that in the liquid phase: dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9

Alternatively, using the ratio of total volumes: dGdL=(VGVL)1/3=(0.03063 m31.802×10−5 m3)1/3≈(1700)1/3≈11.9\frac{d_G}{d_L} = \left(\frac{V_G}{V_L}\right)^{1/3} = \left(\frac{0.03063\text{ m}^3}{1.802 \times 10^{-5}\text{ m}^3}\right)^{1/3} \approx (1700)^{1/3} \approx 11.9

Key Physical Takeaway: Although the gas occupies approximately 17001700 times more volume than the liquid, the average distance between molecules increases by a factor of roughly 1212 because volume scales with the cube of distance (V∝d3V \propto d^3).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the volume ratio V_G / V_L with the linear distance ratio d_G / d_L, failing to take the cube root for the ratio in part (c).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    VL=18.021.00=18.02 cm3/mol=1.802×10−5 m3/mol  ⟹  vL=1.802×10−56.022×1023=2.992×10−29 m3  ⟹  dL=(2.992×10−29)1/3=3.10×10−10 mV_L = \frac{18.02}{1.00} = 18.02\text{ cm}^3/\text{mol} = 1.802 \times 10^{-5}\text{ m}^3/\text{mol} \implies v_L = \frac{1.802 \times 10^{-5}}{6.022 \times 10^{23}} = 2.992 \times 10^{-29}\text{ m}^3 \implies d_L = (2.992 \times 10^{-29})^{1/3} = 3.10 \times 10^{-10}\text{ m}

  2. Step 2

    VG=1×8.314×373.151.013×105=0.03062 m3=3.062×10−2 m3  ⟹  vG=3.062×10−26.022×1023=5.085×10−26 m3  ⟹  dG=(5.085×10−26)1/3=3.70×10−9 mV_G = \frac{1 \times 8.314 \times 373.15}{1.013 \times 10^5} = 0.03062\text{ m}^3 = 3.062 \times 10^{-2}\text{ m}^3 \implies v_G = \frac{3.062 \times 10^{-2}}{6.022 \times 10^{23}} = 5.085 \times 10^{-26}\text{ m}^3 \implies d_G = (5.085 \times 10^{-26})^{1/3} = 3.70 \times 10^{-9}\text{ m}

  3. Step 3

    dGdL=VGVL  ⟹  dGdL=3.062×10−21.802×10−5=1700\frac{d_G}{d_L} = \frac{V_G}{V_L} \implies \frac{d_G}{d_L} = \frac{3.062 \times 10^{-2}}{1.802 \times 10^{-5}} = 1700

    Correct

    dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9 or dGdL=(VGVL)1/3≈17001/3≈11.9\frac{d_G}{d_L} = \left(\frac{V_G}{V_L}\right)^{1/3} \approx 1700^{1/3} \approx 11.9

    You set the linear distance ratio dGdL\frac{d_G}{d_L} equal to the 3D volume ratio VGVL\frac{V_G}{V_L}. Because volume scales cubically with distance (V∝d3V \propto d^3), the linear ratio is given by (VGVL)1/3\left(\frac{V_G}{V_L}\right)^{1/3} or by directly dividing your calculated distances from parts (a) and (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used density and molar mass to find the molecular volume and intermolecular distance of liquid water.

You correctly applied the ideal gas law to determine the molecular volume and intermolecular distance of water vapor.

You handled all unit conversions between cm3\text{cm}^3, m3\text{m}^3, and scientific notation accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensional Scaling Confusion: Volume vs. Linear Distance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated volume and linear separation as directly proportional (d∝Vd \propto V) rather than recognizing that volume scales with the cube of linear distance (V=d3V = d^3, so d=V1/3d = V^{1/3}). Consequently, you computed the volumetric expansion ratio ( 1700~1700) instead of the linear expansion ratio ( 12~12).

REASONING PATH
Your ACEpath teacher’s suggested approach
Scaling of Geometric Dimensions
  • For three-dimensional objects or uniform cubic cells, volume scales with the third power of linear size: V∝d3V \propto d^3, which means d2d1=(V2V1)1/3\frac{d_2}{d_1} = \left(\frac{V_2}{V_1}\right)^{1/3}.

  • Whenever you transition from volume ratios to distance ratios, always take the cube root.

Consistency Check with Previously Solved Values
  • If you have already calculated the two individual quantities (dGd_G and dLd_L), divide them directly to check your ratio.

  • Compute dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9 and verify that it matches (VGVL)1/3\left(\frac{V_G}{V_L}\right)^{1/3}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition v=d3v = d^3, so vGvL=VGVL=(dGdL)3\frac{v_G}{v_L} = \frac{V_G}{V_L} = \left(\frac{d_G}{d_L}\right)^3.

  2. Take the cube root of both sides: dGdL=(VGVL)1/3=(3.062×10−21.802×10−5)1/3≈(1699)1/3≈11.9\frac{d_G}{d_L} = \left(\frac{V_G}{V_L}\right)^{1/3} = \left(\frac{3.062 \times 10^{-2}}{1.802 \times 10^{-5}}\right)^{1/3} \approx (1699)^{1/3} \approx 11.9.

  3. Alternatively, divide the distances found in parts (a) and (b): dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9.

Final answer

(a) dL≈3.10×10−10 md_L \approx 3.10 \times 10^{-10}\text{ m}; (b) dG≈3.70×10−9 md_G \approx 3.70 \times 10^{-9}\text{ m}; (c) dGdL≈11.9\frac{d_G}{d_L} \approx 11.9

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting between volumetric expansion ratios and linear separation ratios using the cube root relation.

  • Always cross-check ratios against directly computed numerical values from earlier steps when available.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to divide the macroscopic molar volume by Avogadro's number, treating the total volume of 1 mole as the volume of a single molecule in part (a).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    VL=18.021.00=18.02 cm3=1.802×10−5 m3V_L = \frac{18.02}{1.00} = 18.02\text{ cm}^3 = 1.802 \times 10^{-5}\text{ m}^3

  2. Step 2

    dL=(1.802×10−5)1/3=0.0262 md_L = (1.802 \times 10^{-5})^{1/3} = 0.0262\text{ m}

    Correct

    vL=VLNA=1.802×10−5 m36.022×1023≈2.992×10−29 m3  ⟹  dL=vL3≈3.10×10−10 mv_L = \frac{V_L}{N_A} = \frac{1.802 \times 10^{-5}\text{ m}^3}{6.022 \times 10^{23}} \approx 2.992 \times 10^{-29}\text{ m}^3 \implies d_L = \sqrt[3]{v_L} \approx 3.10 \times 10^{-10}\text{ m}

    You took the cube root of the total molar volume (1 mol1\text{ mol}) instead of first dividing by Avogadro's number (NAN_A) to find the effective volume per single molecule (vLv_L). A molecular spacing of 2.62 cm2.62\text{ cm} is macroscopic, whereas molecules in a liquid should be separated by fractions of a nanometer.

  3. Step 3

    VG=1×8.314×373.151.013×105=3.062×10−2 m3  ⟹  vG=3.062×10−26.022×1023=5.085×10−26 m3  ⟹  dG=(5.085×10−26)1/3=3.70×10−9 mV_G = \frac{1 \times 8.314 \times 373.15}{1.013 \times 10^5} = 3.062 \times 10^{-2}\text{ m}^3 \implies v_G = \frac{3.062 \times 10^{-2}}{6.022 \times 10^{23}} = 5.085 \times 10^{-26}\text{ m}^3 \implies d_G = (5.085 \times 10^{-26})^{1/3} = 3.70 \times 10^{-9}\text{ m}

  4. Step 4

    dGdL=3.70×10−90.0262=1.41×10−7\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}}{0.0262} = 1.41 \times 10^{-7}

    Correct

    dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9

    Your division was executed correctly with your values, but the result is affected by the incorrect value of dLd_L from part (a). Vaporization should yield an expansion ratio greater than 11, not a tiny fraction.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the molar volume of liquid water from molar mass and density.

You applied the ideal gas law accurately to find the volume of one mole of water vapor.

You properly divided by Avogadro's number and took the cube root to calculate dGd_G in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Macroscopic vs. Microscopic Volume Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the macroscopic molar volume (VLV_L, occupied by 6.022×10236.022 \times 10^{23} molecules) as the microscopic volume occupied by an individual molecule (vLv_L), forgetting to divide by NAN_A before taking the cube root in part (a).

REASONING PATH
Your ACEpath teacher’s suggested approach
Macroscopic vs. Microscopic Quantities
  • Molar volume VmV_m is the volume of 1 mol1\text{ mol} of substance; the volume of a single particle is v=VmNAv = \frac{V_m}{N_A}.

  • Always verify whether a volume represents 1 mole1\text{ mole} or 1 molecule1\text{ molecule} before extracting characteristic molecular lengths.

Order of Magnitude Reality Check
  • Molecules in condensed phases (liquids and solids) have intermolecular separations on the order of angstroms or tenths of nanometers (10−10 m10^{-10}\text{ m}), never centimeters (10−2 m10^{-2}\text{ m}).

  • Pause and evaluate your calculated dimensions: if an atomic or molecular distance is macroscopic, check where Avogadro's number was omitted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the volume occupied by one molecule of liquid water: vL=VLNA=1.802×10−5 m36.022×1023≈2.992×10−29 m3v_L = \frac{V_L}{N_A} = \frac{1.802 \times 10^{-5}\text{ m}^3}{6.022 \times 10^{23}} \approx 2.992 \times 10^{-29}\text{ m}^3.

  2. Find the average intermolecular distance in liquid water: dL=vL3=(2.992×10−29 m3)1/3≈3.10×10−10 m=0.310 nmd_L = \sqrt[3]{v_L} = (2.992 \times 10^{-29}\text{ m}^3)^{1/3} \approx 3.10 \times 10^{-10}\text{ m} = 0.310\text{ nm}.

  3. Recompute the expansion ratio using the corrected dLd_L: dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9.

Final answer

(a) dL≈3.10×10−10 m=0.310 nmd_L \approx 3.10 \times 10^{-10}\text{ m} = 0.310\text{ nm}; (b) dG≈3.70×10−9 m=3.70 nmd_G \approx 3.70 \times 10^{-9}\text{ m} = 3.70\text{ nm}; (c) dGdL≈11.9\frac{d_G}{d_L} \approx 11.9

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to bridge macroscopic bulk properties (density, molar volume) to microscopic particle models using Avogadro's constant.

  • Practice estimating molecular sizes and distances in solids, liquids, and gases to develop intuitive order-of-magnitude checks.

OverviewACEpath Teacher's Diagnosis

03 The student uses Celsius temperature instead of Kelvin in the ideal gas law, causing an underestimation of the vapor volume and intermolecular distance in part (b).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    VL=18.021.00=18.02 cm3/mol=1.802×10−5 m3/mol  ⟹  vL=1.802×10−56.022×1023=2.992×10−29 m3  ⟹  dL=(2.992×10−29)1/3=3.10×10−10 mV_L = \frac{18.02}{1.00} = 18.02\text{ cm}^3/\text{mol} = 1.802 \times 10^{-5}\text{ m}^3/\text{mol} \implies v_L = \frac{1.802 \times 10^{-5}}{6.022 \times 10^{23}} = 2.992 \times 10^{-29}\text{ m}^3 \implies d_L = (2.992 \times 10^{-29})^{1/3} = 3.10 \times 10^{-10}\text{ m}

  2. Step 2

    T=100  ⟹  VG=1×8.314×1001.013×105=8.207×10−3 m3  ⟹  vG=8.207×10−36.022×1023=1.363×10−26 m3  ⟹  dG=(1.363×10−26)1/3=2.39×10−9 mT = 100 \implies V_G = \frac{1 \times 8.314 \times 100}{1.013 \times 10^5} = 8.207 \times 10^{-3}\text{ m}^3 \implies v_G = \frac{8.207 \times 10^{-3}}{6.022 \times 10^{23}} = 1.363 \times 10^{-26}\text{ m}^3 \implies d_G = (1.363 \times 10^{-26})^{1/3} = 2.39 \times 10^{-9}\text{ m}

    Correct

    VG=nRTP=1×8.314×373.151.013×105≈0.03063 m3  ⟹  vG≈5.086×10−26 m3  ⟹  dG≈3.70×10−9 mV_G = \frac{n R T}{P} = \frac{1 \times 8.314 \times 373.15}{1.013 \times 10^5} \approx 0.03063\text{ m}^3 \implies v_G \approx 5.086 \times 10^{-26}\text{ m}^3 \implies d_G \approx 3.70 \times 10^{-9}\text{ m}

    You used the Celsius temperature value 100100 rather than the absolute temperature in Kelvin (T=373.15 KT = 373.15\text{ K}) provided in the problem. The ideal gas law PV=nRTP V = n R T requires absolute temperature in Kelvin.

  3. Step 3

    dGdL=2.39×10−93.10×10−10=7.71\frac{d_G}{d_L} = \frac{2.39 \times 10^{-9}}{3.10 \times 10^{-10}} = 7.71

    Correct

    dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9

    Your ratio calculation method is completely correct, but the numerical answer is off because it carries forward the underestimated dGd_G from step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly related macroscopic molar volume to microscopic particle volume using Avogadro's constant.

You correctly used the cubic model v=d3v = d^3 to compute the intermolecular distance d=v1/3d = v^{1/3} in both states.

You executed all conversions between cm3\text{cm}^3 and m3\text{m}^3 accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Temperature Unit Error in Ideal Gas Law

You recognized the boiling point of water as 100∘C100^\circ\text{C} and entered 100100 into the formula, overlooking that the ideal gas law requires the absolute temperature T=373.15 KT = 373.15\text{ K}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Substituting Celsius temperature into ideal gas equations where absolute thermodynamic temperature in Kelvin (TT in K\text{K}) is required.

REASONING PATH
Your ACEpath teacher’s suggested approach
Temperature in Gas Laws
  • Every gas law derived from kinetic theory (PV=nRTP V = n R T) requires absolute temperature in Kelvin: T(K)=T(∘C)+273.15T(\text{K}) = T(^\circ\text{C}) + 273.15.

  • Whenever you see a temperature given or implied, verify that it is in Kelvin before substituting it into PV=nRTP V = n R T.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute T=373.15 KT = 373.15\text{ K} into the ideal gas law: VG=(1 mol)(8.314 J/(mol⋅K))(373.15 K)1.013×105 Pa≈0.03063 m3V_G = \frac{(1\text{ mol})(8.314\text{ J/(mol}\cdot\text{K)})(373.15\text{ K})}{1.013 \times 10^5\text{ Pa}} \approx 0.03063\text{ m}^3.

  2. Find the volume per gas particle: vG=VGNA=0.03063 m36.022×1023≈5.086×10−26 m3v_G = \frac{V_G}{N_A} = \frac{0.03063\text{ m}^3}{6.022 \times 10^{23}} \approx 5.086 \times 10^{-26}\text{ m}^3.

  3. Find the gas intermolecular spacing: dG=(5.086×10−26 m3)1/3≈3.70×10−9 m=3.70 nmd_G = (5.086 \times 10^{-26}\text{ m}^3)^{1/3} \approx 3.70 \times 10^{-9}\text{ m} = 3.70\text{ nm}.

  4. Compute the expansion ratio: dGdL=3.70×10−9 m3.10×10−10 m≈11.9\frac{d_G}{d_L} = \frac{3.70 \times 10^{-9}\text{ m}}{3.10 \times 10^{-10}\text{ m}} \approx 11.9.

Final answer

(a) dL≈3.10×10−10 md_L \approx 3.10 \times 10^{-10}\text{ m}; (b) dG≈3.70×10−9 md_G \approx 3.70 \times 10^{-9}\text{ m}; (c) dGdL≈11.9\frac{d_G}{d_L} \approx 11.9

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check that any temperature used in thermodynamic relations is expressed in Kelvin.

  • Notice the physical magnitude: gas molecules are separated by roughly 1010 to 1212 molecular diameters at atmospheric pressure, which aligns with dG/dL≈12d_G/d_L \approx 12.

Lock it in

Similar question

01

Liquid nitrogen has a density of 0.808 g/cm30.808\text{ g/cm}^3 and expands by a factor of 694694 in volume when converted to nitrogen gas at room temperature and atmospheric pressure. Calculate the ratio of the average intermolecular distance in nitrogen gas to that in liquid nitrogen.

Answer

dGdL≈8.85\frac{d_G}{d_L} \approx 8.85.

Key steps:

  1. Relate linear separation to volume: dGdL=(VGVL)1/3\frac{d_G}{d_L} = \left(\frac{V_G}{V_L}\right)^{1/3}.
  2. Substitute the given volume expansion factor: dGdL=(694)1/3≈8.85\frac{d_G}{d_L} = (694)^{1/3} \approx 8.85.
02

An ideal gas in a piston is compressed isothermally so that its pressure increases by a factor of 2727. Assuming molecules are evenly spaced, by what factor does the average distance between gas molecules decrease?

Answer

The average distance decreases by a factor of 33 (it becomes 13\frac{1}{3} of its initial value).

Key steps:

  1. For an isothermal ideal gas, P1V1=P2V2  ⟹  V2V1=P1P2=127P_1 V_1 = P_2 V_2 \implies \frac{V_2}{V_1} = \frac{P_1}{P_2} = \frac{1}{27}.
  2. The ratio of intermolecular distances is d2d1=(V2V1)1/3=(127)1/3=13\frac{d_2}{d_1} = \left(\frac{V_2}{V_1}\right)^{1/3} = \left(\frac{1}{27}\right)^{1/3} = \frac{1}{3}.
03

A substance with molar mass M=32.0 g/molM = 32.0\text{ g/mol} has a liquid density of ρL=1.14 g/cm3\rho_L = 1.14\text{ g/cm}^3. In the gas phase at T=300 KT = 300\text{ K} and P=1.00×105 PaP = 1.00 \times 10^5\text{ Pa}, it behaves as an ideal gas. Calculate: (a) the volume expansion ratio VGVL\frac{V_G}{V_L}, and (b) the linear spacing expansion ratio dGdL\frac{d_G}{d_L}. (R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)})

Answer

(a) VGVL≈888\frac{V_G}{V_L} \approx 888; (b) dGdL≈9.61\frac{d_G}{d_L} \approx 9.61.

Key steps:

  1. Molar volume of liquid: VL=32.0 g/mol1.14 g/cm3≈28.07 cm3/mol=2.807×10−5 m3/molV_L = \frac{32.0\text{ g/mol}}{1.14\text{ g/cm}^3} \approx 28.07\text{ cm}^3/\text{mol} = 2.807 \times 10^{-5}\text{ m}^3/\text{mol}.
  2. Molar volume of gas: VG=RTP=(8.314)(300)1.00×105≈0.02494 m3/molV_G = \frac{R T}{P} = \frac{(8.314)(300)}{1.00 \times 10^5} \approx 0.02494\text{ m}^3/\text{mol}.
  3. Volume ratio: VGVL=0.024942.807×10−5≈888.5≈888\frac{V_G}{V_L} = \frac{0.02494}{2.807 \times 10^{-5}} \approx 888.5 \approx 888.
  4. Distance ratio: dGdL=(888.5)1/3≈9.61\frac{d_G}{d_L} = (888.5)^{1/3} \approx 9.61.
Loading workspace…