Resources

In an analytical chemistry laboratory, a student calibrates a precision glass pycnometer to determine the density of an unknown organic solvent. The dry, empty pycnometer has a mass of m0=25.340 gm_0 = 25.340\text{ g}. When completely filled with degassed distilled water (ρw=0.9982 g/cm3\rho_{\text{w}} = 0.9982\text{ g/cm}^3 at 20.0∘C20.0^\circ\text{C}), the total mass is m1=75.485 gm_1 = 75.485\text{ g}. When emptied, dried, and filled with the unknown solvent at the same temperature, the mass is m2=64.830 gm_2 = 64.830\text{ g}. (a) Calculate the calibrated internal volume VV of the pycnometer in cm3\text{cm}^3. (b) Determine the density of the solvent ρs\rho_{\text{s}} in g/cm3\text{g/cm}^3 and kg/m3\text{kg/m}^3. (c) If this solvent is placed in a vertical burette open to air (Patm=1.013×105 PaP_{\text{atm}} = 1.013 \times 10^5\text{ Pa}), calculate the hydrostatic pressure at the stopcock located at a column depth of h=0.650 mh = 0.650\text{ m} below the meniscus (g=9.80 m/s2g = 9.80\text{ m/s}^2).

Answer and steps

Final answer

(a) V=50.24 cm3V = 50.24\text{ cm}^3; (b) ρs=0.7860 g/cm3=786.0 kg/m3\rho_{\text{s}} = 0.7860\text{ g/cm}^3 = 786.0\text{ kg/m}^3; (c) P=1.063×105 PaP = 1.063 \times 10^5\text{ Pa}

Steps

Part (a): Calibrated Internal Volume of the Pycnometer

A pycnometer has a fixed, highly reproducible internal volume. To find this volume, subtract the tare mass of the empty pycnometer from the mass of the water-filled pycnometer to determine the mass of the water inside:

mw=m1−m0m_{\text{w}} = m_1 - m_0

mw=75.485 g−25.340 g=50.145 gm_{\text{w}} = 75.485\text{ g} - 25.340\text{ g} = 50.145\text{ g}

Using the definition of density, ρ=mV\rho = \frac{m}{V}, solve for volume VV:

V=mwρw=50.145 g0.9982 g/cm3≈50.2354 cm3V = \frac{m_{\text{w}}}{\rho_{\text{w}}} = \frac{50.145\text{ g}}{0.9982\text{ g/cm}^3} \approx 50.2354\text{ cm}^3

Rounding to four significant figures gives:

V=50.24 cm3V = 50.24\text{ cm}^3


Part (b): Density of the Unknown Solvent

Because the pycnometer is filled to the exact same calibrated volume VV, the mass of the solvent is:

ms=m2−m0m_{\text{s}} = m_2 - m_0

ms=64.830 g−25.340 g=39.490 gm_{\text{s}} = 64.830\text{ g} - 25.340\text{ g} = 39.490\text{ g}

Now, compute the density ρs\rho_{\text{s}} using the unrounded calibrated volume to avoid intermediate rounding errors:

ρs=msV=39.490 g50.2354 cm3≈0.78603 g/cm3\rho_{\text{s}} = \frac{m_{\text{s}}}{V} = \frac{39.490\text{ g}}{50.2354\text{ cm}^3} \approx 0.78603\text{ g/cm}^3

Rounding to four significant figures gives ρs=0.7860 g/cm3\rho_{\text{s}} = 0.7860\text{ g/cm}^3.

To convert from g/cm3\text{g/cm}^3 to SI units (kg/m3\text{kg/m}^3), multiply by 10001000:

ρs=0.7860×103 kg/m3=786.0 kg/m3\rho_{\text{s}} = 0.7860 \times 10^3\text{ kg/m}^3 = 786.0\text{ kg/m}^3

Common Pitfall: Converting density between unit systems requires cubing the length conversion factor (1 m=100 cm  ⟹  1 m3=106 cm31\text{ m} = 100\text{ cm} \implies 1\text{ m}^3 = 10^6\text{ cm}^3). Hence, 1 g/cm3=10−3 kg10−6 m3=1000 kg/m31\text{ g/cm}^3 = \frac{10^{-3}\text{ kg}}{10^{-6}\text{ m}^3} = 1000\text{ kg/m}^3.


Part (c): Total Pressure at the Bottom of the Column

The total (absolute) hydrostatic pressure PP at a depth hh below the open surface is the sum of atmospheric pressure PatmP_{\text{atm}} acting on the liquid surface and the fluid column pressure ρsgh\rho_{\text{s}} g h:

P=Patm+ρsghP = P_{\text{atm}} + \rho_{\text{s}} g h

First, calculate the hydrostatic gauge pressure contribution in pascals (Pa=N/m2\text{Pa} = \text{N/m}^2):

Pgauge=ρsgh=(786.0 kg/m3)⋅(9.80 m/s2)⋅(0.650 m)=5006.82 Pa≈5.007×103 PaP_{\text{gauge}} = \rho_{\text{s}} g h = (786.0\text{ kg/m}^3) \cdot (9.80\text{ m/s}^2) \cdot (0.650\text{ m}) = 5006.82\text{ Pa} \approx 5.007 \times 10^3\text{ Pa}

Add atmospheric pressure to find the total pressure:

P=1.013×105 Pa+0.05007×105 Pa=1.06307×105 PaP = 1.013 \times 10^5\text{ Pa} + 0.05007 \times 10^5\text{ Pa} = 1.06307 \times 10^5\text{ Pa}

Rounding to four significant figures:

P=1.063×105 PaP = 1.063 \times 10^5\text{ Pa}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to subtract the mass of the empty pycnometer when calculating the volume of water, dividing the total filled mass directly by density.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=m1ρw  ⟹  V=75.4850.9982=75.621 cm3V = \frac{m_1}{\rho_{\text{w}}} \implies V = \frac{75.485}{0.9982} = 75.621\text{ cm}^3

    Correct

    mw=m1−m0=75.485 g−25.340 g=50.145 g  ⟹  V=mwρw=50.145 g0.9982 g/cm3≈50.24 cm3m_{\text{w}} = m_1 - m_0 = 75.485\text{ g} - 25.340\text{ g} = 50.145\text{ g} \implies V = \frac{m_{\text{w}}}{\rho_{\text{w}}} = \frac{50.145\text{ g}}{0.9982\text{ g/cm}^3} \approx 50.24\text{ cm}^3

    You divided the total mass of the filled pycnometer (m1m_1) directly by the density of water. You must subtract the tare mass of the empty flask (m0m_0) to obtain the net mass of the water alone.

  2. Step 2

    ms=m2−m0=64.830−25.340=39.490 gm_{\text{s}} = m_2 - m_0 = 64.830 - 25.340 = 39.490\text{ g}

  3. Step 3

    ρs=msV=39.49075.621=0.5222 g/cm3  ⟹  ρs=522.2 kg/m3\rho_{\text{s}} = \frac{m_{\text{s}}}{V} = \frac{39.490}{75.621} = 0.5222\text{ g/cm}^3 \implies \rho_{\text{s}} = 522.2\text{ kg/m}^3

    Correct

    ρs=msV=39.490 g50.2354 cm3≈0.7860 g/cm3=786.0 kg/m3\rho_{\text{s}} = \frac{m_{\text{s}}}{V} = \frac{39.490\text{ g}}{50.2354\text{ cm}^3} \approx 0.7860\text{ g/cm}^3 = 786.0\text{ kg/m}^3

    Your formula and unit conversion factor (1 g/cm3=1000 kg/m31\text{ g/cm}^3 = 1000\text{ kg/m}^3) are completely correct, but the numerical result is affected by the incorrect volume from part (a).

  4. Step 4

    P=ρs×g×h  ⟹  P=522.2×9.80×0.650=3326 PaP = \rho_{\text{s}} \times g \times h \implies P = 522.2 \times 9.80 \times 0.650 = 3326\text{ Pa}

    Correct

    P=Patm+ρsgh=1.013×105 Pa+(786.0)(9.80)(0.650) Pa=1.063×105 PaP = P_{\text{atm}} + \rho_{\text{s}} g h = 1.013 \times 10^5\text{ Pa} + (786.0)(9.80)(0.650)\text{ Pa} = 1.063 \times 10^5\text{ Pa}

    Because the burette is open to the atmosphere, the total hydrostatic pressure at depth hh must include atmospheric pressure (PatmP_{\text{atm}}) acting on the liquid surface, not just the gauge pressure ρsgh\rho_{\text{s}} g h.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net mass of the solvent by subtracting the dry pycnometer mass.

You correctly used the definition of density ρ=mV\rho = \frac{m}{V}.

You converted density accurately from g/cm3\text{g/cm}^3 to kg/m3\text{kg/m}^3 by multiplying by 10001000.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Tare Mass Omission & Total vs. Gauge Pressure

You remembered to subtract the tare mass m0m_0 for the solvent in part (b), but overlooked subtracting it for the water calibration in part (a).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the total weighed mass of the filled pycnometer as the fluid mass during calibration, and you conflated gauge pressure with total hydrostatic pressure in an open container.

REASONING PATH
Your ACEpath teacher’s suggested approach
Tare Mass in Density Pycnometry
  • Net fluid mass inside a pycnometer is always mfluid=mtotal−memptym_{\text{fluid}} = m_{\text{total}} - m_{\text{empty}}.

  • Always isolate the liquid mass before dividing by density or volume.

Absolute vs. Gauge Pressure
  • For a fluid column open to the atmosphere, total pressure is P=Patm+ρghP = P_{\text{atm}} + \rho g h.

  • Check whether the container is open to air and whether total or gauge pressure is requested.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find the mass of water: mw=m1−m0=75.485 g−25.340 g=50.145 gm_{\text{w}} = m_1 - m_0 = 75.485\text{ g} - 25.340\text{ g} = 50.145\text{ g}.

  2. Calculate the internal volume: V=mwρw=50.145 g0.9982 g/cm3=50.2354 cm3≈50.24 cm3V = \frac{m_{\text{w}}}{\rho_{\text{w}}} = \frac{50.145\text{ g}}{0.9982\text{ g/cm}^3} = 50.2354\text{ cm}^3 \approx 50.24\text{ cm}^3.

  3. Recalculate solvent density: ρs=39.490 g50.2354 cm3≈0.7860 g/cm3=786.0 kg/m3\rho_{\text{s}} = \frac{39.490\text{ g}}{50.2354\text{ cm}^3} \approx 0.7860\text{ g/cm}^3 = 786.0\text{ kg/m}^3.

  4. Add atmospheric pressure to obtain total pressure: P=1.013×105 Pa+(786.0 kg/m3)(9.80 m/s2)(0.650 m)=1.063×105 PaP = 1.013 \times 10^5\text{ Pa} + (786.0\text{ kg/m}^3)(9.80\text{ m/s}^2)(0.650\text{ m}) = 1.063 \times 10^5\text{ Pa}.

Final answer

(a) V=50.24 cm3V = 50.24\text{ cm}^3; (b) ρs=0.7860 g/cm3=786.0 kg/m3\rho_{\text{s}} = 0.7860\text{ g/cm}^3 = 786.0\text{ kg/m}^3; (c) P=1.063×105 PaP = 1.063 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • In pycnometer and weighing-bottle problems, write mfluid=mfilled−mtarem_{\text{fluid}} = m_{\text{filled}} - m_{\text{tare}} before touching any density formula.

  • When calculating pressure in an open column, write down P=Patm+ρghP = P_{\text{atm}} + \rho g h to ensure atmospheric pressure is included.

OverviewACEpath Teacher's Diagnosis

02 The student uses the density in g/cm³ instead of converting to kg/m³ when calculating hydrostatic pressure, leading to a value that is off by a factor of 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    m_{w\text{w}} = 75.485 - 25.340 = 50.145 g\text{ g}   ⟹  \implies V = 50.145 / 0.9982 = 50.235 cm\text{ cm}^3_

  2. Step 2

    m_{s\text{s}} = 64.830 - 25.340 = 39.490 g\text{ g}   ⟹  \implies ρ\rho{s\text{s}} = 39.490 / 50.235 = 0.7861 g/cm\text{ g/cm}^3   ⟹  \implies ρ\rho{s\text{s}} = 786.1 kg/m\text{ kg/m}^3_

  3. Step 3

    P = ρ\rho{s\text{s}} ×\times g ×\times h   ⟹  \implies P = 0.7861 ×\times 9.80 ×\times 0.650 = 5.007 Pa\text{ Pa}

    Correct

    P = P_{atm\text{atm}} + ρ\rho_{s\text{s}} g h = 1.013 ×\times 10^5 Pa\text{ Pa} + (786.0 kg/m\text{ kg/m}^3)(9.80 m/s\text{ m/s}^2)(0.650 m\text{ m}) = 1.063 ×\times 10^5 Pa\text{ Pa}

    You substituted ρs=0.7861 g/cm3\rho_{\text{s}} = 0.7861\text{ g/cm}^3 instead of the SI value 786.1 kg/m3786.1\text{ kg/m}^3, which understated the column pressure by a factor of 10001000. You also omitted the ambient atmospheric pressure PatmP_{\text{atm}} specified for the open burette.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net mass of both water and the unknown liquid.

You used the correct relationship between mass, volume, and density.

You successfully converted the solvent's density into kg/m3\text{kg/m}^3 in part (b).

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit mismatch in hydrostatic pressure formula

You already converted ρs\rho_{\text{s}} to 786.1 kg/m3786.1\text{ kg/m}^3 in part (b), but plugged the unconverted 0.7861 g/cm30.7861\text{ g/cm}^3 value into P=ρghP = \rho g h.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Formulas involving derived SI units like pascals (Pa=N/m2=kg/(m⋅s2)\text{Pa} = \text{N/m}^2 = \text{kg}/(\text{m}\cdot\text{s}^2)) strictly require all base quantities to be in standard SI units (kg/m3\text{kg/m}^3, m/s2\text{m/s}^2, and m\text{m}). Additionally, when an open container is subjected to atmospheric pressure, total pressure includes PatmP_{\text{atm}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check SI base units before multiplying
  • For fluid pressure in pascals, ensure density is in kg/m3\text{kg/m}^3, gg is in m/s2\text{m/s}^2, and depth hh is in m\text{m}.

  • Select the value with units of kg/m3\text{kg/m}^3 (786.1 kg/m3786.1\text{ kg/m}^3) instead of g/cm3\text{g/cm}^3 (0.7861 g/cm30.7861\text{ g/cm}^3).

Include surface pressure for open systems
  • The absolute pressure at depth hh open to atmosphere is P=Patm+ρghP = P_{\text{atm}} + \rho g h.

  • Add the given atmospheric pressure 1.013×105 Pa1.013 \times 10^5\text{ Pa} to the calculated liquid column pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the fluid column (gauge) pressure using SI density: Pgauge=ρsgh=(786.0 kg/m3)(9.80 m/s2)(0.650 m)=5006.8 Pa≈5.007×103 PaP_{\text{gauge}} = \rho_{\text{s}} g h = (786.0\text{ kg/m}^3)(9.80\text{ m/s}^2)(0.650\text{ m}) = 5006.8\text{ Pa} \approx 5.007 \times 10^3\text{ Pa}.

  2. Add the atmospheric pressure to get the absolute pressure at the stopcock: P=Patm+Pgauge=1.013×105 Pa+0.05007×105 Pa=1.063×105 PaP = P_{\text{atm}} + P_{\text{gauge}} = 1.013 \times 10^5\text{ Pa} + 0.05007 \times 10^5\text{ Pa} = 1.063 \times 10^5\text{ Pa}.

Final answer

P = 1.063 ×\times 10^5 Pa\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write explicit unit labels next to each numerical substitution in physics formulas to catch unit mismatches early.

  • Check whether a pressure problem asks for gauge pressure (liquid column only) or absolute pressure (liquid column plus atmospheric pressure).

OverviewACEpath Teacher's Diagnosis

03 The student misapplies the unit conversion between g/cm³ and kg/m³ by dividing by 1000 instead of multiplying by 1000.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    mw=75.485−25.340=50.145 g  ⟹  V=50.145/0.9982=50.235 cm3m_{\text{w}} = 75.485 - 25.340 = 50.145\text{ g} \implies V = 50.145 / 0.9982 = 50.235\text{ cm}^3

  2. Step 2

    ms=64.830−25.340=39.490 g  ⟹  ρs=39.490/50.235=0.7861 g/cm3m_{\text{s}} = 64.830 - 25.340 = 39.490\text{ g} \implies \rho_{\text{s}} = 39.490 / 50.235 = 0.7861\text{ g/cm}^3

  3. Step 3

    ρs=0.7861/1000=7.861×10−4 kg/m3\rho_{\text{s}} = 0.7861 / 1000 = 7.861 \times 10^{-4}\text{ kg/m}^3

    Correct

    ρs=0.7860 g/cm3×10−3 kg10−6 m3=786.0 kg/m3\rho_{\text{s}} = 0.7860\text{ g/cm}^3 \times \frac{10^{-3}\text{ kg}}{10^{-6}\text{ m}^3} = 786.0\text{ kg/m}^3

    You divided by 10001000 instead of multiplying by 10001000. Converting from g/cm3\text{g/cm}^3 to kg/m3\text{kg/m}^3 requires accounting for both mass (10−3 kg/g10^{-3}\text{ kg/g}) and volume ((10−2 m)3=10−6 m3/cm3(10^{-2}\text{ m})^3 = 10^{-6}\text{ m}^3/\text{cm}^3), which yields a conversion factor of 10001000.

  4. Step 4

    P=ρs×g×h  ⟹  P=7.861×10−4×9.80×0.650=5.01×10−3 PaP = \rho_{\text{s}} \times g \times h \implies P = 7.861 \times 10^{-4} \times 9.80 \times 0.650 = 5.01 \times 10^{-3}\text{ Pa}

    Correct

    P=Patm+ρsgh=1.013×105 Pa+(786.0)(9.80)(0.650) Pa=1.063×105 PaP = P_{\text{atm}} + \rho_{\text{s}}gh = 1.013 \times 10^5\text{ Pa} + (786.0)(9.80)(0.650)\text{ Pa} = 1.063 \times 10^5\text{ Pa}

    Because the burette is open to the atmosphere, the total hydrostatic pressure at the stopcock must include atmospheric pressure (PatmP_{\text{atm}}) in addition to the fluid column pressure (ρsgh\rho_{\text{s}}gh). Furthermore, this step used the incorrect density value from Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the net mass of both water and the unknown solvent by subtracting the empty pycnometer mass.

You applied the density formula ρ=mV\rho = \frac{m}{V} properly to find both the pycnometer volume and the solvent density in g/cm3\text{g/cm}^3.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Density Unit Conversion and Absolute Pressure

Dividing by 10001000 instead of multiplying by 10001000 when converting g/cm3\text{g/cm}^3 to kg/m3\text{kg/m}^3.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating g/cm3→kg/m3\text{g/cm}^3 \to \text{kg/m}^3 as a simple mass unit conversion from grams to kilograms, forgetting that the cubic centimeter in the denominator introduces a factor of 10−6 m310^{-6}\text{ m}^3, and calculating gauge pressure instead of total absolute pressure in an open container.

REASONING PATH
Your ACEpath teacher’s suggested approach
Compound Unit Conversion for Density
  • 1 g/cm3=10−3 kg(10−2 m)3=10−3 kg10−6 m3=1000 kg/m31\text{ g/cm}^3 = \frac{10^{-3}\text{ kg}}{(10^{-2}\text{ m})^3} = \frac{10^{-3}\text{ kg}}{10^{-6}\text{ m}^3} = 1000\text{ kg/m}^3

  • Multiply density in g/cm3\text{g/cm}^3 by 10001000 to express it in SI units (kg/m3\text{kg/m}^3).

Absolute vs. Gauge Pressure
  • For a fluid column open to the atmosphere, total pressure is P=Patm+ρghP = P_{\text{atm}} + \rho gh, not merely ρgh\rho gh.

  • Always check whether the problem specifies an open container or gives PatmP_{\text{atm}}, and add PatmP_{\text{atm}} for total pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert density to kg/m3\text{kg/m}^3: ρs=0.78603 g/cm3×1000=786.03 kg/m3\rho_{\text{s}} = 0.78603\text{ g/cm}^3 \times 1000 = 786.03\text{ kg/m}^3.

  2. Compute the hydrostatic gauge pressure: Pgauge=ρsgh=(786.03 kg/m3)(9.80 m/s2)(0.650 m)=5006.9 Pa≈0.0501×105 PaP_{\text{gauge}} = \rho_{\text{s}}gh = (786.03\text{ kg/m}^3)(9.80\text{ m/s}^2)(0.650\text{ m}) = 5006.9\text{ Pa} \approx 0.0501 \times 10^5\text{ Pa}.

  3. Add atmospheric pressure for total pressure: P=Patm+Pgauge=1.013×105 Pa+0.0501×105 Pa=1.063×105 PaP = P_{\text{atm}} + P_{\text{gauge}} = 1.013 \times 10^5\text{ Pa} + 0.0501 \times 10^5\text{ Pa} = 1.063 \times 10^5\text{ Pa}.

Final answer

(a) V=50.24 cm3V = 50.24\text{ cm}^3; (b) ρs=0.7860 g/cm3=786.0 kg/m3\rho_{\text{s}} = 0.7860\text{ g/cm}^3 = 786.0\text{ kg/m}^3; (c) P=1.063×105 PaP = 1.063 \times 10^5\text{ Pa}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice converting derived units by explicitly writing out conversion fractions with powers, such as (10−2 m)3(10^{-2}\text{ m})^3.

  • Verify physical sanity: water has a density of 1000 kg/m31000\text{ kg/m}^3, so any common liquid density in kg/m3\text{kg/m}^3 should typically be in the hundreds or thousands, never 10−410^{-4}.

  • Highlight whether a pressure problem asks for gauge pressure or absolute pressure before setting up the equation.

Lock it in

Similar question

01

A dry pycnometer has a mass of 30.00 g30.00\text{ g}. When filled with pure water (ρ=1.000 g/cm3\rho = 1.000\text{ g/cm}^3), the total mass is 80.00 g80.00\text{ g}. When filled with an unknown oil, the total mass is 72.50 g72.50\text{ g}. Calculate the volume of the pycnometer and the density of the oil in g/cm3\text{g/cm}^3.

Answer

V=50.00 cm3V = 50.00\text{ cm}^3, ρoil=0.850 g/cm3\rho_{\text{oil}} = 0.850\text{ g/cm}^3. Water mass mw=80.00−30.00=50.00 g  ⟹  V=50.00 cm3m_{\text{w}} = 80.00 - 30.00 = 50.00\text{ g} \implies V = 50.00\text{ cm}^3. Oil mass moil=72.50−30.00=42.50 g  ⟹  ρoil=42.5050.00=0.850 g/cm3m_{\text{oil}} = 72.50 - 30.00 = 42.50\text{ g} \implies \rho_{\text{oil}} = \frac{42.50}{50.00} = 0.850\text{ g/cm}^3.

02

An open cylindrical tank contains a layer of liquid with density ρ=850 kg/m3\rho = 850\text{ kg/m}^3 to a depth of h=2.40 mh = 2.40\text{ m}. Atmospheric pressure is 1.01×105 Pa1.01 \times 10^5\text{ Pa} and g=9.80 m/s2g = 9.80\text{ m/s}^2. Find both the gauge pressure and the total absolute pressure at the bottom of the tank.

Answer

Pgauge=2.00×104 PaP_{\text{gauge}} = 2.00 \times 10^4\text{ Pa}, Ptotal=1.21×105 PaP_{\text{total}} = 1.21 \times 10^5\text{ Pa}. Gauge pressure Pgauge=ρgh=(850)(9.80)(2.40)=19992 Pa≈2.00×104 PaP_{\text{gauge}} = \rho g h = (850)(9.80)(2.40) = 19992\text{ Pa} \approx 2.00 \times 10^4\text{ Pa}. Total pressure Ptotal=Patm+Pgauge=1.01×105+0.20×105=1.21×105 PaP_{\text{total}} = P_{\text{atm}} + P_{\text{gauge}} = 1.01 \times 10^5 + 0.20 \times 10^5 = 1.21 \times 10^5\text{ Pa}.

03

A pycnometer has a tare mass of 20.150 g20.150\text{ g} and holds 25.000 cm325.000\text{ cm}^3. It is filled with a dense liquid to a total mass of 51.650 g51.650\text{ g}. This liquid is poured into an open vertical U-tube. At what depth hh below the open surface is the absolute pressure equal to 1.050×105 Pa1.050 \times 10^5\text{ Pa}? Take Patm=1.013×105 PaP_{\text{atm}} = 1.013 \times 10^5\text{ Pa} and g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer

h=0.300 mh = 0.300\text{ m} (30.0 cm30.0\text{ cm}). Net liquid mass m=51.650−20.150=31.500 gm = 51.650 - 20.150 = 31.500\text{ g}, so ρ=31.500 g25.000 cm3=1.260 g/cm3=1260 kg/m3\rho = \frac{31.500\text{ g}}{25.000\text{ cm}^3} = 1.260\text{ g/cm}^3 = 1260\text{ kg/m}^3. The gauge pressure needed is ΔP=P−Patm=1.050×105−1.013×105=3700 Pa\Delta P = P - P_{\text{atm}} = 1.050 \times 10^5 - 1.013 \times 10^5 = 3700\text{ Pa}. Solving for depth gives h=ΔPρg=3700(1260)(9.80)≈0.300 mh = \frac{\Delta P}{\rho g} = \frac{3700}{(1260)(9.80)} \approx 0.300\text{ m}.

Loading workspace…