Resources
A crate of mass rests on a rough horizontal loading ramp inclined at an angle above the horizontal. The coefficient of static friction between the ramp and the crate is , and the coefficient of kinetic friction is . An external pulling force of magnitude is applied parallel to the incline, directed up the ramp. Take the acceleration due to gravity to be . Determine whether the crate remains in static equilibrium or transitions to a non-equilibrium state, and calculate the exact magnitude of the friction force acting on the crate.
Answer and steps
Final answer
The crate remains in static equilibrium; the static friction force has magnitude directed up the ramp.
Steps
Set Up the Coordinate System and Resolve Gravity
To determine whether the crate moves and to find the friction force, we resolve all forces parallel and perpendicular to the inclined ramp.
Define the -axis parallel to the incline (positive pointing up the ramp) and the -axis perpendicular to the incline (positive pointing outward from the ramp).
The gravitational force acting on the crate has magnitude:
Resolving gravity into components:
- Perpendicular to the ramp:
- Parallel to the ramp (downward):
Determine the Normal Force and Maximum Static Friction
Along the perpendicular () axis, the crate is in equilibrium ():
The maximum possible static friction force that the ramp can exert before the crate slips is:
Check for Static Equilibrium
Consider the forces acting parallel to the incline, excluding friction:
- Applied force up the ramp:
- Gravitational component down the ramp:
The net tendency to slide along the incline without friction is:
Because this net force is directed down the ramp, static friction must oppose this impending motion by pointing up the ramp. For static equilibrium ():
Since the required static friction force () is well below the threshold of maximum static friction (), the crate does not slip and remains in static equilibrium.
Common Pitfall: Static friction is a self-adjusting reaction force; it only takes on the exact value needed to maintain equilibrium (). Do not compute or use the kinetic coefficient unless the required force exceeds and motion occurs.
Typical errors
01 The student assumes static friction is always equal to its maximum value μ_s * N rather than balancing the parallel forces in equilibrium.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3
, so the crate remains in static equilibrium.
- Step 4Correct
Static friction is a self-adjusting reaction force; it only exerts what is needed to maintain equilibrium (), reaching only at the point of impending slip.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the gravitational force into perpendicular and parallel components.
You accurately calculated the normal force and the maximum static friction threshold.
You correctly tested whether the crate slips by comparing the net parallel force against .
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated the static friction formula as the actual value of static friction rather than as an upper limit ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Nature of Static Friction
, with exactly matching the net applied parallel force in equilibrium.
When an object is at rest, use Newton's first law () along the surface to solve for ; only use as the maximum threshold.
CORRECTED PATH
ACEpath Teacher's DemonstrationRecognize that the crate is in static equilibrium, which means along the ramp.
Set up the balance equation: .
Solve for the friction force: directed up the ramp.
The crate remains in static equilibrium; the static friction force has magnitude directed up the ramp.
02 The student incorrectly adds the applied force to the parallel component of gravity instead of recognizing they act in opposite directions along the incline.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2
- Step 3Correct
The external pulling force acts up the ramp, while the gravity component acts down the ramp. Because they point in opposite directions along the incline, their magnitudes subtract rather than add.
- Step 4Correct
Because of the sign error in the net parallel force, you compared an inflated force of against instead of the true net tendency to slide (), which incorrectly led you to conclude the crate slips.
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly resolved the perpendicular component of gravity to calculate the normal force.
You correctly applied the static friction formula to determine the sliding threshold.
You used the correct trigonometric function to find the parallel component of gravity.
THE ERROR
Where Your ACEpath Teacher Spotted the Mistakeno
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou treated forces along the incline as scalar quantities and added their magnitudes together, rather than establishing a consistent one-dimensional coordinate axis where forces pointing up the ramp and down the ramp carry opposite algebraic signs.
REASONING PATH
Your ACEpath teacher’s suggested approach- Define an Incline Coordinate Axis
Forces along an inclined plane must have signs assigned based on direction: choose up the incline and down the incline.
Draw a free-body diagram showing pointing up the ramp () and pointing down the ramp (), then compute their algebraic sum.
- Compare Required $f_s$ to $f_{s,\max}$
An object remains in static equilibrium if the force needed to balance the other parallel forces satisfies .
Set to find . Since , the crate does not move.
CORRECTED PATH
ACEpath Teacher's DemonstrationDefine the positive -axis as pointing up the inclined ramp.
Write the net force along the incline without friction: .
Because this tendency is directed down the ramp, static friction acts up the ramp () to maintain equilibrium: .
Compare the magnitude of the required static friction force to the threshold: .
The crate remains in static equilibrium; the static friction force has magnitude directed up the ramp.
03 The student confuses sine and cosine for the components on an incline, using sine for normal force and cosine for the parallel component of gravity.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
You used the sine function instead of the cosine function to find the normal force. Because the ramp angle is measured from the horizontal, the component of gravity perpendicular to the incline is adjacent to , giving .
- Step 2Correct
You correctly applied the formula , but this calculation inherited your incorrect value of the normal force.
- Step 3Correct
You used the cosine function instead of the sine function for the parallel component of gravity. The component pulling down the incline is opposite to the angle in the gravity vector triangle, which requires .
- Step 4Correct
You compared the required net parallel force to the maximum static friction threshold with valid logic, but because of the swapped trigonometric components, you reached an incorrect conclusion.
- Step 5Correct
You calculated kinetic friction because you concluded the crate moves. Since the crate actually remains at rest, static friction provides exactly the force needed to balance the parallel forces: .
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly recognized that static equilibrium requires comparing the net parallel applied force to .
You set up the force difference along the incline correctly by subtracting the uphill pulling force from the downhill component of gravity.
You performed all arithmetic calculations accurately based on your written values.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou accidentally swapped and when resolving gravity along and perpendicular to the inclined ramp.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou associated the perpendicular () axis with and the parallel () axis with , which is typical for standard horizontal coordinate systems but reverses for ramps inclined at angle to the horizontal.
REASONING PATH
Your ACEpath teacher’s suggested approach- Identify the Adjacent Component
When an incline angle is measured from the horizontal, the angle between the vertical gravity vector and the perpendicular axis into the ramp is also .
Draw the gravity right triangle and verify that the perpendicular component is adjacent to () and the downhill component is opposite ().
- Limit Check at Extreme Angles
As the incline angle approaches zero (a flat surface), downhill gravity must vanish () and the normal force must equal the full weight ().
Mentally plug in before calculating to ensure your chosen trigonometric functions match physical behavior.
CORRECTED PATH
ACEpath Teacher's DemonstrationResolve the gravitational force correctly: and .
Find the normal force and maximum static friction: , so .
Compute the net parallel force tending to cause slip: pointing down the ramp.
Compare the required holding force to the threshold: since , the crate does not slip.
Determine the equilibrium friction force: static friction matches the unbalanced force, yielding directed up the ramp.
The crate remains in static equilibrium; the static friction force has magnitude directed up the ramp.
Lock it in
What is the fundamental difference between and for an object at rest?
is the maximum friction threshold before slipping, whereas is a self-adjusting reaction force satisfying determined by .
Similar question
A block rests on a horizontal floor where . A horizontal pulling force of is applied to the block. Determine whether the block moves and find the magnitude of the friction force. (Take .)
Answer
(static equilibrium). The maximum static friction is . Since , the block remains in static equilibrium, so .
A trunk rests on a ramp inclined at above the horizontal. The coefficient of static friction is . No external forces other than gravity and contact forces act on the trunk. Does the trunk slip, and what is the friction force acting on it? (Take .)
Answer
up the ramp (static equilibrium). The downhill gravitational component is . The maximum static friction is . Because , the trunk does not slip, and static equilibrium yields .
A crate is on a incline with and . A force is applied parallel to and directed up the incline. (a) Find the magnitude of friction when . (b) Find the magnitude of friction when . (Take .)
Answer
(a) up the incline; (b) down the incline. Downhill gravity is , and . For (a), the net tendency down the incline is , so equilibrium holds and up the ramp. For (b), the upward driving force is , so the crate accelerates up the incline and kinetic friction opposes motion: .