Resources
A specialized detector requires photoelectrons to be ejected with a maximum kinetic energy of from a cesium photocathode whose work function is . (a) Determine the required photon energy in . (b) Calculate the corresponding incident wavelength in nanometers () needed to achieve this kinetic energy, using , , and .
Answer and steps
Final answer
(a) ; (b)
Steps
Part (a): Determining the Required Photon Energy
According to Einstein's photoelectric effect equation, the total energy of an incident photon, , is divided between overcoming the work function of the metal, , and imparting maximum kinetic energy to the ejected photoelectron, :
Substitute the given values:
- Work function:
- Maximum kinetic energy:
Part (b): Calculating the Incident Wavelength
The energy of a photon is related to its wavelength by:
-
Convert the photon energy from electron-volts () to joules ():
-
Compute the wavelength:
-
Convert meters to nanometers ():
Common Pitfall: Forgetting to convert the photon energy from to before calculating wavelength with standard SI constants ( in and in ) leads to an incorrect scale by a factor of .
Typical errors
01 The student subtracts the work function from the kinetic energy instead of adding them, yielding an incorrect photon energy and subsequent wavelength.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1Correct
The incident photon energy must supply enough energy to overcome the binding work function plus provide kinetic energy: . Subtracting gave a negative value, which you dropped to proceed.
- Step 2Correct
Your conversion from electron-volts to joules followed the correct conversion factor, but it used the incorrect photon energy from Step 1.
- Step 3Correct
You correctly applied the de Broglie/photon wavelength relation and converted meters to nanometers, but the numerical result was affected by the initial energy value.
WHAT YOU DID WELL
Compliments from Your TeacherYou remembered the relationship between photon energy and wavelength, .
You correctly converted energy from electron-volts to joules using the elementary charge .
You accurately converted your final wavelength from meters to nanometers.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou isolated photon energy by subtracting instead of adding it, leading to a negative energy value.
WHY IT HAPPENED
ACEpath Teacher's DiagnosisConfusing the total incoming energy with the leftover energy. By conservation of energy, the incident photon energy is the total input, which must be split into liberating the electron (work function ) and accelerating it (), meaning .
REASONING PATH
Your ACEpath teacher’s suggested approach- Energy Balance in the Photoelectric Effect
Total Energy In = Energy to Free Electron + Remaining Kinetic Energy: .
Whenever solving for incident photon energy , ensure it is strictly greater than both and .
- Sign Check for Physical Quantities
Photon energies and kinetic energies must always be positive values.
If your formula produces a negative energy like , stop and verify your algebraic rearrangement rather than simply taking the absolute value.
CORRECTED PATH
ACEpath Teacher's DemonstrationApply the conservation of energy equation: .
Convert this energy to joules: .
Compute the wavelength: .
(a) ; (b)
02 The student forgets to convert the photon energy from electron-volts to joules when calculating the wavelength using Planck's constant in SI units.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
- Step 2Correct
Because Planck's constant is given in joule-seconds (), the energy in the denominator must be converted from electron-volts () to joules () by multiplying by before dividing.
- Step 3Correct
Your numerical division and prefix conversion from meters to nanometers followed through accurately from the uncoverted energy value, but the final numerical value is off by a factor of due to the missing unit conversion.
WHAT YOU DID WELL
Compliments from Your TeacherYou stated the correct energy conservation equation for the photoelectric effect.
You accurately calculated the photon energy in electron-volts for part (a).
You selected the correct formula connecting photon energy to wavelength, .
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted an energy value in electron-volts directly into an equation that uses SI units (joules).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisOverlooking unit compatibility in multi-unit physics equations: using SI constants like in requires all energy quantities in the same formula to be expressed in joules (), not electron-volts ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Check Unit System Consistency
If constants are given in SI units ( in and in ), all energy terms must be in joules ().
Multiply energy in by before substituting into .
- Physical Reasonableness Check
Visible, ultraviolet, and infrared photon wavelengths typically range between and .
If your calculated wavelength turns out to be around or , check whether an elementary charge factor was omitted.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert photon energy to joules: .
Substitute SI values: .
Convert meters to nanometers: .
(a) ; (b)
03 The student confuses the required photon energy with the threshold energy and calculates wavelength using only the work function instead of the total photon energy.
Sample Student Work
Reviewed by ACEpath TeacherStep-by-Step Review
Walk Through It with Your Teacher- Step 1
E = K_{\max} + \Phi E = 1.45 + 2.14 = 3.59_
- Step 2
E = \Phi = 2.14 E = 2.14 1.602 10^{-19} = 3.428 10^{-19}
CorrectE = 3.59 1.602 10^{-19} = 5.751 10^{-19}
You used the threshold energy () instead of the incident photon energy found in part (a). While defines the minimum energy needed to liberate an electron with zero kinetic energy, producing electrons with requires the full energy .
- Step 3
= = = 5.795 10^{-7} = 580
Correct= = 345
Your conversion method and substitution into were mathematically sound, but substituting the threshold energy yielded the cutoff wavelength () instead of the required wavelength ().
WHAT YOU DID WELL
Compliments from Your TeacherYou correctly used Einstein's photoelectric equation to calculate the photon energy in part (a).
You accurately converted energy from electron-volts to joules using the fundamental charge .
You used the correct relationship between photon energy and wavelength, , and converted meters to nanometers properly.
THE ERROR
Where Your ACEpath Teacher Spotted the MistakeYou substituted the work function as the photon energy in part (b) instead of using the total photon energy you calculated in part (a).
WHY IT HAPPENED
ACEpath Teacher's DiagnosisYou conflated the condition for the threshold/cutoff wavelength (where and ) with the condition for ejecting photoelectrons with a specific non-zero kinetic energy ().
REASONING PATH
Your ACEpath teacher’s suggested approach- Incident Energy vs. Threshold Energy
The threshold wavelength only gives . Any non-zero kinetic energy requires a shorter incident wavelength: .
Always carry forward the total incident photon energy from part (a) when determining the incident beam's wavelength.
CORRECTED PATH
ACEpath Teacher's DemonstrationConvert total energy to joules: .
Substitute into : .
Convert meters to nanometers: .
(a) ; (b)
Lock it in
What is the fundamental conservation-of-energy equation relating incident photon energy , work function , and maximum photoelectron kinetic energy ?
(or ). The incident photon provides all the energy, which is shared between escaping the surface and moving away.
Similar question
A potassium photocathode has a work function of . Light shines on the cathode, releasing photoelectrons with a maximum kinetic energy of . Find the energy of the incident photons in .
Answer
. Using conservation of energy, .
Ultraviolet light with a wavelength of ejects electrons from a metal surface with . Calculate the work function of the metal in . (Use .)
Answer
. First, find the photon energy: . Then rearrange Einstein's equation for the work function: .
A photocathode with work function is illuminated by photons of frequency . What is the stopping potential required to stop all ejected photoelectrons? (Use .)
Answer
. First, calculate photon energy: . Next, calculate maximum kinetic energy: . Since , the stopping potential is .