Resources

A luminous arrow is situated along the principal axis to the left of a thin diverging lens having a focal length of f=−24.0 cmf = -24.0\text{ cm}. The lens produces an upright, virtual image whose lateral linear magnification is measured to be m=+0.400m = +0.400. Calculate the required object distance dod_o from the optical center of the lens to achieve this exact magnification.

Answer and steps

Final answer

do=36.0 cmd_o = 36.0\text{ cm} (the object is placed 36.0 cm36.0\text{ cm} to the left of the lens)

Steps

01

Relate image distance did_i to object distance dod_o using magnification

To determine the object distance dod_o, we apply the relationship between lateral magnification and the thin-lens equation using the standard Cartesian sign convention.

The lateral magnification mm for a thin lens is defined as: m=−didom = -\frac{d_i}{d_o}

Given that the image is upright and diminished with m=+0.400m = +0.400: +0.400=−dido  ⟹  di=−0.400do+0.400 = -\frac{d_i}{d_o} \implies d_i = -0.400 d_o

The negative sign confirms that the image is virtual, located on the same side of the lens as the object.


02

Substitute into the thin-lens equation

The thin-lens equation relates the focal length ff, object distance dod_o, and image distance did_i: 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}

For a diverging (concave) lens, the focal length is negative: f=−24.0 cmf = -24.0\text{ cm}. Substituting ff and di=−0.400dod_i = -0.400 d_o: 1−24.0=1do−10.400do\frac{1}{-24.0} = \frac{1}{d_o} - \frac{1}{0.400 d_o}

Simplify the terms on the right-hand side using 10.400=2.5\frac{1}{0.400} = 2.5: 1−24.0=1−2.5do\frac{1}{-24.0} = \frac{1 - 2.5}{d_o} 1−24.0=−1.5do\frac{1}{-24.0} = -\frac{1.5}{d_o}


03

Solve for dod_o

Equating the denominators: do=1.5⋅24.0 cm=36.0 cmd_o = 1.5 \cdot 24.0\text{ cm} = 36.0\text{ cm}

Common Pitfall: Forgetting that a diverging lens has a negative focal length (f<0f < 0) or omitting the negative sign in the magnification formula m=−di/dom = -d_i/d_o will lead to an incorrect negative object distance. In this convention, a real object placed in front of the lens must have a positive object distance do>0d_o > 0.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the negative sign in the thin-lens magnification formula, writing m = d_i / d_o instead of m = -d_i / d_o.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=dido=0.400  ⟹  di=0.400dom = \frac{d_i}{d_o} = 0.400 \implies d_i = 0.400 d_o

    Correct

    m=−dido=+0.400  ⟹  di=−0.400dom = -\frac{d_i}{d_o} = +0.400 \implies d_i = -0.400 d_o

    You omitted the negative sign in the thin-lens lateral magnification definition m=−didom = -\frac{d_i}{d_o}. Since the image is virtual and upright (m>0m > 0), the image distance must be negative (di<0d_i < 0), giving di=−0.400dod_i = -0.400 d_o.

  2. Step 2

    1f=1do+1di  ⟹  −124.0=1do+10.400do  ⟹  −124.0=1do+2.5do=3.5do\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \implies -\frac{1}{24.0} = \frac{1}{d_o} + \frac{1}{0.400 d_o} \implies -\frac{1}{24.0} = \frac{1}{d_o} + \frac{2.5}{d_o} = \frac{3.5}{d_o}

    Correct

    1−24.0=1do+1−0.400do  ⟹  −124.0=1−2.5do=−1.5do\frac{1}{-24.0} = \frac{1}{d_o} + \frac{1}{-0.400 d_o} \implies -\frac{1}{24.0} = \frac{1 - 2.5}{d_o} = -\frac{1.5}{d_o}

    Your algebraic manipulation and substitution of f=−24.0 cmf = -24.0\text{ cm} were mathematically correct, but the calculation was affected by carrying forward di=+0.400dod_i = +0.400 d_o instead of di=−0.400dod_i = -0.400 d_o.

  3. Step 3

    do=−84.0 cmd_o = -84.0\text{ cm}

    Correct

    do=36.0 cmd_o = 36.0\text{ cm}

    Your final calculation followed directly from the incorrect numerator in Step 2. A real object located in front of a lens must always have a positive object distance (do>0d_o > 0); obtaining a negative object distance is a clear sign that a sign error occurred earlier.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the thin-lens equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}.

You correctly assigned a negative focal length f=−24.0 cmf = -24.0\text{ cm} for a diverging lens.

You correctly converted 10.400\frac{1}{0.400} into 2.52.5 and solved the linear equation accurately based on your substituted values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Lens Magnification Formula

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusion regarding the Cartesian sign convention for thin-lens magnification, specifically omitting the explicit negative sign in m=−didom = -\frac{d_i}{d_o} (a formula often confused with spherical mirrors where m=−didom = -\frac{d_i}{d_o}, or intuitively assumed to have no negative sign).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thin-Lens Magnification Formula
  • For all thin lenses under Cartesian sign conventions, lateral magnification is defined as m=−didom = -\frac{d_i}{d_o}.

  • Always write m=−didom = -\frac{d_i}{d_o} first. An upright image has m>0m > 0, which requires did_i and dod_o to have opposite signs.

Physical Sanity Check for Real Objects
  • A real object placed in front of a lens must have do>0d_o > 0. Virtual images formed by a diverging lens are always on the same side as the object, so di<0d_i < 0.

  • If your final answer yields do<0d_o < 0 for an object placed in front of a lens, immediately re-check the signs of ff, mm, and did_i.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Express image distance using the correct magnification formula: m=−dido=+0.400  ⟹  di=−0.400dom = -\frac{d_i}{d_o} = +0.400 \implies d_i = -0.400 d_o.

  2. Substitute f=−24.0 cmf = -24.0\text{ cm} and di=−0.400dod_i = -0.400 d_o into the thin-lens equation: −124.0=1do−10.400do-\frac{1}{24.0} = \frac{1}{d_o} - \frac{1}{0.400 d_o}.

  3. Simplify the right-hand side using 10.400=2.5\frac{1}{0.400} = 2.5: −124.0=1−2.5do=−1.5do-\frac{1}{24.0} = \frac{1 - 2.5}{d_o} = -\frac{1.5}{d_o}.

  4. Multiply both sides by −1-1 and solve for dod_o: do=1.5×24.0=36.0 cmd_o = 1.5 \times 24.0 = 36.0\text{ cm}.

Final answer

do=36.0 cmd_o = 36.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the key difference: for thin lenses, m=−didom = -\frac{d_i}{d_o}; for spherical mirrors, m=−didom = -\frac{d_i}{d_o} as well, but remember that virtual images in lenses have di<0d_i < 0.

  • Whenever an image is stated to be virtual in a lens problem, immediately verify that your image distance did_i is explicitly negative.

  • Perform a sanity check on the sign of dod_o: a real object in front of a lens must always have do>0d_o > 0.

OverviewACEpath Teacher's Diagnosis

02 The student ignores the negative sign for the focal length of a diverging lens, substituting f = +24.0 cm into the thin lens formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=−dido=0.400  ⟹  di=−0.400dom = -\frac{d_i}{d_o} = 0.400 \implies d_i = -0.400 d_o

  2. Step 2

    1f=1do+1di  ⟹  124.0=1do−10.400do\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \implies \frac{1}{24.0} = \frac{1}{d_o} - \frac{1}{0.400 d_o}

    Correct

    1f=1do+1di  ⟹  1−24.0=1do−10.400do\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \implies \frac{1}{-24.0} = \frac{1}{d_o} - \frac{1}{0.400 d_o}

    A diverging (concave) lens has a virtual focal point, so its focal length must be negative (f=−24.0 cmf = -24.0\text{ cm}). You substituted +24.0 cm+24.0\text{ cm} instead.

  3. Step 3

    124.0=1do−2.5do=−1.5do\frac{1}{24.0} = \frac{1}{d_o} - \frac{2.5}{d_o} = \frac{-1.5}{d_o}

    Correct

    1−24.0=1do−2.5do=−1.5do\frac{1}{-24.0} = \frac{1}{d_o} - \frac{2.5}{d_o} = -\frac{1.5}{d_o}

    Your algebraic simplification was mechanically correct, but the left-hand side carried the wrong sign from the previous step.

  4. Step 4

    do=−36.0 cmd_o = -36.0\text{ cm}

    Correct

    do=36.0 cmd_o = 36.0\text{ cm}

    Because of the omitted negative sign on ff, you obtained a negative object distance. A real object in front of a lens must have do>0d_o > 0.

WHAT YOU DID WELL
Compliments from Your Teacher

You used the correct relationship between linear magnification and object/image distances.

You correctly expressed did_i in terms of dod_o including the negative sign for an upright virtual image.

You performed the fraction simplification 1do−2.5do=−1.5do\frac{1}{d_o} - \frac{2.5}{d_o} = -\frac{1.5}{d_o} accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error: diverging lens focal length

You dropped the negative sign on the focal length when substituting f=−24.0 cmf = -24.0\text{ cm} into the thin-lens equation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Overlooking the optical sign convention for focal lengths: diverging lenses always take a negative focal length (f<0f < 0), whereas converging lenses take a positive focal length (f>0f > 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Lens Type Sign Convention
  • Converging lenses have f>0f > 0; diverging lenses have f<0f < 0.

  • Always explicitly attach a minus sign to ff whenever a problem specifies a diverging or concave lens.

Physical Reality Check for Real Objects
  • For a single lens forming an image from a physical object placed in front of it, the object distance must always satisfy do>0d_o > 0.

  • If your final algebra produces do<0d_o < 0 for a real source, stop immediately and check the signs of ff and did_i.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute f=−24.0 cmf = -24.0\text{ cm} and di=−0.400dod_i = -0.400 d_o into the thin-lens equation: 1−24.0=1do−10.400do\frac{1}{-24.0} = \frac{1}{d_o} - \frac{1}{0.400 d_o}.

  2. Simplify the right-hand side: 1−24.0=1−2.5do=−1.5do\frac{1}{-24.0} = \frac{1 - 2.5}{d_o} = -\frac{1.5}{d_o}.

  3. Equate denominators and solve for dod_o: do=(−1.5)(−24.0 cm)=36.0 cmd_o = (-1.5)(-24.0\text{ cm}) = 36.0\text{ cm}.

Final answer

do=36.0 cmd_o = 36.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard Cartesian sign conventions for mirrors and thin lenses.

  • Practice checking whether final physical parameters (dod_o, did_i, hih_i) have physically meaningful signs before finishing.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly takes the reciprocal of each term separately by writing f = d_o + d_i instead of adding reciprocal distances.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    m=−dido=0.400  ⟹  di=−0.400dom = \frac{-d_i}{d_o} = 0.400 \implies d_i = -0.400 d_o

  2. Step 2

    f=do+dif = d_o + d_i

    Correct

    1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}

    You inverted each term individually instead of using the reciprocal form of the thin-lens equation. In general, 1a+b≠1a+1b\frac{1}{a+b} \neq \frac{1}{a} + \frac{1}{b}.

  3. Step 3

    −24.0=do−0.400do  ⟹  −24.0=0.600do-24.0 = d_o - 0.400 d_o \implies -24.0 = 0.600 d_o

    Correct

    1−24.0=1do−10.400do  ⟹  −124.0=−1.5do\frac{1}{-24.0} = \frac{1}{d_o} - \frac{1}{0.400 d_o} \implies -\frac{1}{24.0} = -\frac{1.5}{d_o}

    Your algebraic combination followed logically from your formula in step 2, but it carries forward the incorrect linear equation.

  4. Step 4

    do=−40.0 cmd_o = -40.0\text{ cm}

    Correct

    do=36.0 cmd_o = 36.0\text{ cm}

    Your final result is affected by the equation error. Note also that a real object placed in front of a lens must have a positive object distance (do>0d_o > 0).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of lateral magnification m=−didom = -\frac{d_i}{d_o} to relate did_i and dod_o.

You correctly preserved the negative sign indicating that a diverging lens forms a virtual image.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reciprocal addition error in thin-lens formula

You treated the focal length as the direct sum of object and image distances instead of taking the sum of their reciprocals.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied a common reciprocal algebra misconception, assuming 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} implies f=do+dif = d_o + d_i. Optical power adds reciprocally, meaning the reciprocal of a sum of fractions cannot be found by inverting individual terms.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thin-Lens Equation Structure
  • The thin-lens formula relates optical powers: 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}.

  • Always write the equation with reciprocals first, find a common denominator on the right-hand side, and only then invert to solve for an unknown distance.

Physical Reality Check for Real Objects
  • For any real object placed in front of a refracting lens, do>0d_o > 0.

  • If your calculation yields a negative object distance for a standard physical object, pause and check your signs or formula structure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute f=−24.0 cmf = -24.0\text{ cm} and di=−0.400dod_i = -0.400 d_o into 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}:

  2. 1−24.0=1do+1−0.400do=1do−2.5do\frac{1}{-24.0} = \frac{1}{d_o} + \frac{1}{-0.400 d_o} = \frac{1}{d_o} - \frac{2.5}{d_o}

  3. Combine terms over the common denominator dod_o: −124.0=−1.5do-\frac{1}{24.0} = -\frac{1.5}{d_o}

  4. Cross-multiply to solve for dod_o: do=1.5×24.0 cm=36.0 cmd_o = 1.5 \times 24.0\text{ cm} = 36.0\text{ cm}

Final answer

do=36.0 cmd_o = 36.0\text{ cm}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review fraction addition with variables to reinforce why 1a+1b=a+bab\frac{1}{a} + \frac{1}{b} = \frac{a+b}{ab}, so the reciprocal is aba+b\frac{ab}{a+b}, never a+ba+b.

  • Practice solving thin-lens problems by isolating the unknown term as a reciprocal fraction before inverting at the very end.

  • Perform a sign-convention sanity check on every final distance: diverging lenses always produce virtual images (di<0d_i < 0) of real objects (do>0d_o > 0).

Lock it in

Similar question

01

A diverging lens with focal length f=−15.0 cmf = -15.0\text{ cm} forms an upright, virtual image with lateral magnification m=+0.250m = +0.250. Calculate the object distance dod_o.

Answer

do=45.0 cmd_o = 45.0\text{ cm}. Key steps: m=−dido=+0.250  ⟹  di=−0.250dom = -\frac{d_i}{d_o} = +0.250 \implies d_i = -0.250 d_o. Substitute into 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}: −115.0=1do−10.250do=1−4.0do=−3.0do-\frac{1}{15.0} = \frac{1}{d_o} - \frac{1}{0.250 d_o} = \frac{1 - 4.0}{d_o} = -\frac{3.0}{d_o}. Thus, do=3.0×15.0=45.0 cmd_o = 3.0 \times 15.0 = 45.0\text{ cm}.

02

A converging lens of focal length f=+20.0 cmf = +20.0\text{ cm} is used as a magnifying glass to form an upright, virtual image that is magnified by m=+2.50m = +2.50. Find the required object distance dod_o.

Answer

do=12.0 cmd_o = 12.0\text{ cm}. Key steps: m=−dido=+2.50  ⟹  di=−2.50dom = -\frac{d_i}{d_o} = +2.50 \implies d_i = -2.50 d_o. Substitute into the thin-lens equation: 120.0=1do−12.50do=1−0.40do=0.60do\frac{1}{20.0} = \frac{1}{d_o} - \frac{1}{2.50 d_o} = \frac{1 - 0.40}{d_o} = \frac{0.60}{d_o}. Thus, do=0.60×20.0=12.0 cmd_o = 0.60 \times 20.0 = 12.0\text{ cm}.

03

An object is placed at distance dod_o in front of a thin lens. The lens forms an inverted, real image on a screen that is three times the size of the object (m=−3.00m = -3.00). If the distance between the object and the screen is 80.0 cm80.0\text{ cm}, determine the focal length ff of the lens.

Answer

f=+15.0 cmf = +15.0\text{ cm}. Key steps: m=−dido=−3.00  ⟹  di=3.00dom = -\frac{d_i}{d_o} = -3.00 \implies d_i = 3.00 d_o. The total separation is do+di=do+3.00do=4.00do=80.0 cmd_o + d_i = d_o + 3.00 d_o = 4.00 d_o = 80.0\text{ cm}, so do=20.0 cmd_o = 20.0\text{ cm} and di=60.0 cmd_i = 60.0\text{ cm}. Substitute into the lens equation: 1f=120.0+160.0=460.0=115.0  ⟹  f=+15.0 cm\frac{1}{f} = \frac{1}{20.0} + \frac{1}{60.0} = \frac{4}{60.0} = \frac{1}{15.0} \implies f = +15.0\text{ cm}.

Loading workspace…