Resources

A straight conductor of length L=0.600 mL = 0.600\text{ m} is aligned perpendicular to an unknown uniform magnetic field B⃗\vec{B}. When a current of I=2.50 AI = 2.50\text{ A} flows through the conductor, it experiences a magnetic force of magnitude FB=0.825 NF_B = 0.825\text{ N}. Working backward from this measured force, determine the required field strength BB, and find the new current InewI_{\text{new}} that would be required to produce a reduced magnetic force of 0.330 N0.330\text{ N} if the field and wire orientation remain unchanged.

Answer and steps

Final answer

B=0.550 TB = 0.550\text{ T}, Inew=1.00 AI_{\text{new}} = 1.00\text{ A}

Steps

Part 1: Determine the Magnetic Field Strength BB

The magnitude of the magnetic force acting on a straight, current-carrying wire of length LL in a uniform magnetic field BB is given by:

FB=ILBsin⁡θF_B = I L B \sin\theta

where:

  • II is the electric current through the conductor,
  • LL is the length of the conductor in the field,
  • BB is the magnetic field strength,
  • θ\theta is the angle between the direction of the current and the direction of the magnetic field.

Because the conductor is oriented perpendicular to the magnetic field, θ=90∘\theta = 90^\circ, which gives sin⁡90∘=1\sin 90^\circ = 1. The formula simplifies to:

FB=ILBF_B = I L B

Rearrange the equation to solve for the magnetic field strength BB:

B=FBILB = \frac{F_B}{I L}

Substitute the given values into the equation:

B=0.825 N(2.50 A)(0.600 m)=0.8251.50 T=0.550 TB = \frac{0.825\text{ N}}{(2.50\text{ A})(0.600\text{ m})} = \frac{0.825}{1.50}\text{ T} = 0.550\text{ T}


Part 2: Find the New Current InewI_{\text{new}}

Since the length of the wire LL, the magnetic field strength BB, and the perpendicular orientation (θ=90∘\theta = 90^\circ) remain constant, the magnetic force is directly proportional to the current flowing through the wire:

FB∝IF_B \propto I

Method 1: Direct Substitution

Rearrange FB,new=InewLBF_{B,\text{new}} = I_{\text{new}} L B to solve for InewI_{\text{new}}:

Inew=FB,newLBI_{\text{new}} = \frac{F_{B,\text{new}}}{L B}

Substitute the known values:

Inew=0.330 N(0.600 m)(0.550 T)=0.3300.330 A=1.00 AI_{\text{new}} = \frac{0.330\text{ N}}{(0.600\text{ m})(0.550\text{ T})} = \frac{0.330}{0.330}\text{ A} = 1.00\text{ A}

Method 2: Ratio of Forces

Alternatively, set up a direct proportion using the initial and new states:

InewI=FB,newFB\frac{I_{\text{new}}}{I} = \frac{F_{B,\text{new}}}{F_B}

Inew=I⋅FB,newFB=2.50 A⋅0.330 N0.825 N=2.50 A⋅0.400=1.00 AI_{\text{new}} = I \cdot \frac{F_{B,\text{new}}}{F_B} = 2.50\text{ A} \cdot \frac{0.330\text{ N}}{0.825\text{ N}} = 2.50\text{ A} \cdot 0.400 = 1.00\text{ A}

Common Pitfall: Always verify the angle θ\theta. If the wire is not perpendicular to the field, forgetting the sin⁡θ\sin\theta factor will lead to an incorrect calculation. Here, because θ=90∘\theta = 90^\circ, sin⁡θ=1\sin\theta = 1.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the formula rearrangement when solving for magnetic field strength, multiplying force by length and current instead of dividing.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FB=I⋅L⋅BF_B = I \cdot L \cdot B

  2. Step 2

    B=FB⋅I⋅L  ⟹  B=0.825⋅2.50⋅0.600  ⟹  B=1.2375 TB = F_B \cdot I \cdot L \implies B = 0.825 \cdot 2.50 \cdot 0.600 \implies B = 1.2375\text{ T}

    Correct

    B=FBIL=0.825 N(2.50 A)(0.600 m)=0.550 TB = \frac{F_B}{I L} = \frac{0.825\text{ N}}{(2.50\text{ A})(0.600\text{ m})} = 0.550\text{ T}

    To isolate BB in FB=ILBF_B = I L B, you must divide both sides by ILI L, giving B=FBILB = \frac{F_B}{I L}. Multiplying the terms together led to an incorrect field strength.

  3. Step 3

    Inew=FB,newL⋅B  ⟹  Inew=0.3300.600⋅1.2375  ⟹  Inew=0.3300.7425  ⟹  Inew=0.444 AI_{\text{new}} = \frac{F_{B,\text{new}}}{L \cdot B} \implies I_{\text{new}} = \frac{0.330}{0.600 \cdot 1.2375} \implies I_{\text{new}} = \frac{0.330}{0.7425} \implies I_{\text{new}} = 0.444\text{ A}

    Correct

    Inew=FB,newLB=0.330 N(0.600 m)(0.550 T)=1.00 AI_{\text{new}} = \frac{F_{B,\text{new}}}{L B} = \frac{0.330\text{ N}}{(0.600\text{ m})(0.550\text{ T})} = 1.00\text{ A}

    Your algebraic formula for InewI_{\text{new}} was set up correctly, but substituting your incorrect value of B=1.2375 TB = 1.2375\text{ T} caused the final current to be incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled the base formula for magnetic force on a perpendicular current-carrying wire.

You correctly identified the algebraic structure needed to isolate current in the second part of the problem.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula rearrangement error (multiplication instead of division)

You multiplied FBF_B by II and LL instead of dividing by them to isolate BB.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Inverting multiplicative relationships: when solving for a factor within a product y=kxy = kx, dividing both sides by the known factors is required rather than multiplying them.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate by Inverse Operations
  • If a=b⋅c⋅da = b \cdot c \cdot d, then d=ab⋅cd = \frac{a}{b \cdot c}, never a⋅b⋅ca \cdot b \cdot c.

  • Check the operation connecting the target variable to other terms before moving them across the equals sign.

Dimensional Unit Check
  • [B]=NA⋅m=T[B] = \frac{\text{N}}{\text{A}\cdot\text{m}} = \text{T}.

  • Verify units: multiplying gives N⋅A⋅m\text{N}\cdot\text{A}\cdot\text{m}, which is not a tesla (T\text{T}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Rearrange FB=ILBF_B = I L B correctly by dividing both sides by ILI L: B=FBILB = \frac{F_B}{I L}.

  2. Substitute the given values: B=0.825 N(2.50 A)(0.600 m)=0.8251.50 T=0.550 TB = \frac{0.825\text{ N}}{(2.50\text{ A})(0.600\text{ m})} = \frac{0.825}{1.50}\text{ T} = 0.550\text{ T}.

  3. Substitute B=0.550 TB = 0.550\text{ T} into Inew=FB,newLBI_{\text{new}} = \frac{F_{B,\text{new}}}{L B}: Inew=0.330 N(0.600 m)(0.550 T)=0.3300.330 A=1.00 AI_{\text{new}} = \frac{0.330\text{ N}}{(0.600\text{ m})(0.550\text{ T})} = \frac{0.330}{0.330}\text{ A} = 1.00\text{ A}.

Final answer

B=0.550 T,Inew=1.00 AB = 0.550\text{ T},\quad I_{\text{new}} = 1.00\text{ A}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice isolating variables from single-term products like F=ILBF = I L B or V=IRV = I R using division.

  • Perform a quick unit consistency check on isolated formulas before plugging in numerical values.

OverviewACEpath Teacher's Diagnosis

02 The student confuses the inverse and direct proportionality between force and current, setting Inew = I * (FB / FB,new) instead of scaling directly with the force.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    FB=I∗L∗B  ⟹  B=FBI∗L  ⟹  B=0.8252.50∗0.600  ⟹  B=0.8251.50=0.550 TF_B = I * L * B \implies B = \frac{F_B}{I * L} \implies B = \frac{0.825}{2.50 * 0.600} \implies B = \frac{0.825}{1.50} = 0.550\text{ T}

  2. Step 2

    InewI=FBFB,new\frac{I_{\text{new}}}{I} = \frac{F_B}{F_{B,\text{new}}}

    Correct

    InewI=FB,newFB\frac{I_{\text{new}}}{I} = \frac{F_{B,\text{new}}}{F_B}

    Because magnetic force is directly proportional to current (FB∝IF_B \propto I), the ratio of currents must match the ratio of forces: InewI=FB,newFB\frac{I_{\text{new}}}{I} = \frac{F_{B,\text{new}}}{F_B}. Writing FBFB,new\frac{F_B}{F_{B,\text{new}}} inverted the relationship.

  3. Step 3

    Inew=2.50∗(0.8250.330)  ⟹  Inew=2.50∗2.5=6.25 AI_{\text{new}} = 2.50 * \left(\frac{0.825}{0.330}\right) \implies I_{\text{new}} = 2.50 * 2.5 = 6.25\text{ A}

    Correct

    Inew=2.50 A⋅(0.330 N0.825 N)=1.00 AI_{\text{new}} = 2.50\text{ A} \cdot \left(\frac{0.330\text{ N}}{0.825\text{ N}}\right) = 1.00\text{ A}

    This calculation followed your inverted proportion. Because you needed a smaller force, the current had to decrease rather than increase.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the formula FB=ILBF_B = I L B for a perpendicular wire.

You solved for the magnetic field strength BB with correct arithmetic and units.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Proportionality Ratio

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated current and magnetic force as inversely proportional rather than directly proportional, resulting in an upside-down ratio FBFB,new\frac{F_B}{F_{B,\text{new}}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Direct vs. Inverse Proportionality
  • When y=kxy = k x with k>0k > 0, yy is directly proportional to xx, meaning y2y1=x2x1\frac{y_2}{y_1} = \frac{x_2}{x_1}.

  • Set up ratios with matching subscripts on the numerator and denominator: InewIold=FB,newFB,old\frac{I_{\text{new}}}{I_{\text{old}}} = \frac{F_{B,\text{new}}}{F_{B,\text{old}}}.

Physical Sanity Check
  • If the magnetic field and wire length are unchanged, reducing the force requires reducing the current.

  • Check whether your calculated current decreases when the target force is smaller than the original force.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the direct proportionality: InewI=FB,newFB\frac{I_{\text{new}}}{I} = \frac{F_{B,\text{new}}}{F_B}.

  2. Substitute the given values: Inew=2.50 A⋅0.330 N0.825 NI_{\text{new}} = 2.50\text{ A} \cdot \frac{0.330\text{ N}}{0.825\text{ N}}.

  3. Simplify the ratio: Inew=2.50 A⋅0.400=1.00 AI_{\text{new}} = 2.50\text{ A} \cdot 0.400 = 1.00\text{ A}.

Final answer

B=0.550 TB = 0.550\text{ T}, Inew=1.00 AI_{\text{new}} = 1.00\text{ A}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how direct variation equations (y=kxy = kx) translate into ratios: y2y1=x2x1\frac{y_2}{y_1} = \frac{x_2}{x_1}.

  • Before calculating, predict whether the target quantity should increase or decrease to catch inverted fractions early.

OverviewACEpath Teacher's Diagnosis

03 The student incorrectly calculates the product I * L in the denominator as 0.150 instead of 1.50, resulting in a tenfold overestimate of the field strength.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    FB=I⋅L⋅B  ⟹  B=FBI⋅L  ⟹  B=0.8252.50⋅0.600F_B = I \cdot L \cdot B \implies B = \frac{F_B}{I \cdot L} \implies B = \frac{0.825}{2.50 \cdot 0.600}

  2. Step 2

    B=0.8250.150=5.50 TB = \frac{0.825}{0.150} = 5.50\text{ T}

    Correct

    B=0.8251.50 T=0.550 TB = \frac{0.825}{1.50}\text{ T} = 0.550\text{ T}

    You miscalculated the product in the denominator: 2.50×0.600=1.502.50 \times 0.600 = 1.50, not 0.1500.150. This decimal placement error made your calculated field ten times too large.

  3. Step 3

    Inew=FB,newL⋅B  ⟹  Inew=0.3300.600⋅5.50I_{\text{new}} = \frac{F_{B,\text{new}}}{L \cdot B} \implies I_{\text{new}} = \frac{0.330}{0.600 \cdot 5.50}

    Correct

    Inew=FB,newL⋅B=0.330 N(0.600 m)(0.550 T)I_{\text{new}} = \frac{F_{B,\text{new}}}{L \cdot B} = \frac{0.330\text{ N}}{(0.600\text{ m})(0.550\text{ T})}

    Your formula rearrangement for InewI_{\text{new}} is completely correct, but it uses your inaccurate BB value from the previous step.

  4. Step 4

    Inew=0.3303.30=0.100 AI_{\text{new}} = \frac{0.330}{3.30} = 0.100\text{ A}

    Correct

    Inew=0.330 N0.330 T⋅m=1.00 AI_{\text{new}} = \frac{0.330\text{ N}}{0.330\text{ T}\cdot\text{m}} = 1.00\text{ A}

    You accurately evaluated the expression with your substituted values, but the result is ten times smaller than the correct value due to the earlier decimal error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the magnetic force formula FB=ILBsin⁡θF_B = I L B \sin\theta with sin⁡90∘=1\sin 90^\circ = 1.

You rearranged the equation algebraically to solve for both BB and InewI_{\text{new}} with total accuracy.

You followed a clear, structured problem-solving method from start to finish.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decimal Multiplication Error

You evaluated 2.50×0.6002.50 \times 0.600 as 0.1500.150 instead of 1.501.50.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

A misplaced decimal point occurred when multiplying decimals without an order-of-magnitude sanity check (2.5×0.6=52×35=32=1.52.5 \times 0.6 = \frac{5}{2} \times \frac{3}{5} = \frac{3}{2} = 1.5).

REASONING PATH
Your ACEpath teacher’s suggested approach
Fraction / Order of Magnitude Check
  • Before dividing, estimate or convert simple decimals to fractions: 2.5=522.5 = \frac{5}{2} and 0.6=350.6 = \frac{3}{5}, so their product is 52×35=1.5\frac{5}{2} \times \frac{3}{5} = 1.5.

  • Pause after multiplying decimals and verify that the magnitude makes physical sense.

Proportionality Shortcut
  • When BB, LL, and θ\theta are fixed, FB∝IF_B \propto I, meaning InewI=FB,newFB\frac{I_{\text{new}}}{I} = \frac{F_{B,\text{new}}}{F_B}.

  • Use direct ratios for Part 2 to bypass rounding or intermediate calculation errors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recalculate the denominator: 2.50 A×0.600 m=1.50 A⋅m2.50\text{ A} \times 0.600\text{ m} = 1.50\text{ A}\cdot\text{m}.

  2. Compute B=0.825 N1.50 A⋅m=0.550 TB = \frac{0.825\text{ N}}{1.50\text{ A}\cdot\text{m}} = 0.550\text{ T}.

  3. Substitute B=0.550 TB = 0.550\text{ T} into the current equation: Inew=0.330 N0.600 m×0.550 T=0.3300.330=1.00 AI_{\text{new}} = \frac{0.330\text{ N}}{0.600\text{ m} \times 0.550\text{ T}} = \frac{0.330}{0.330} = 1.00\text{ A}.

Final answer

B=0.550 TB = 0.550\text{ T}, Inew=1.00 AI_{\text{new}} = 1.00\text{ A}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice quick mental sanity checks on decimal products using simple fractions.

  • Solve ratio-based second parts using direct proportion (F1/F2=I1/I2F_1/F_2 = I_1/I_2) to prevent propagating earlier arithmetic slips.

Lock it in

Similar question

01

A straight wire of length 0.40 m0.40\text{ m} carries a current of 5.0 A5.0\text{ A} perpendicular to a uniform magnetic field. If the wire experiences a magnetic force of 1.6 N1.6\text{ N}, calculate the magnetic field strength BB.

Answer

B=0.80 TB = 0.80\text{ T}. Rearrange FB=ILBF_B = I L B to B=FBIL=1.6 N(5.0 A)(0.40 m)=1.62.0 T=0.80 TB = \frac{F_B}{I L} = \frac{1.6\text{ N}}{(5.0\text{ A})(0.40\text{ m})} = \frac{1.6}{2.0}\text{ T} = 0.80\text{ T}.

02

A 0.25 m0.25\text{ m} wire perpendicular to a 0.80 T0.80\text{ T} magnetic field experiences a force of 0.60 N0.60\text{ N}. (a) Find the current II in the wire. (b) What current is needed to increase the magnetic force to 1.50 N1.50\text{ N} while keeping the field and wire length unchanged?

Answer

(a) I=3.0 AI = 3.0\text{ A}; (b) Inew=7.5 AI_{\text{new}} = 7.5\text{ A}. For part (a), I=FBLB=0.60 N(0.25 m)(0.80 T)=3.0 AI = \frac{F_B}{L B} = \frac{0.60\text{ N}}{(0.25\text{ m})(0.80\text{ T})} = 3.0\text{ A}. For part (b), by direct proportion InewI=FnewF  ⟹  Inew=3.0 A×1.500.60=7.5 A\frac{I_{\text{new}}}{I} = \frac{F_{\text{new}}}{F} \implies I_{\text{new}} = 3.0\text{ A} \times \frac{1.50}{0.60} = 7.5\text{ A}.

03

A rigid horizontal rod of length 0.50 m0.50\text{ m} and mass 0.060 kg0.060\text{ kg} is suspended in a horizontal magnetic field that is perpendicular to the rod. What minimum magnetic field strength BB is required to levitate the rod against gravity using a current of 4.0 A4.0\text{ A}? (Take g=9.8 m/s2g = 9.8\text{ m/s}^2.)

Answer

B=0.294 TB = 0.294\text{ T} (or ≈0.29 T\approx 0.29\text{ T}). For levitation, magnetic force balances weight: FB=mg=0.060 kg×9.8 m/s2=0.588 NF_B = m g = 0.060\text{ kg} \times 9.8\text{ m/s}^2 = 0.588\text{ N}. Rearranging gives B=mgIL=0.588 N(4.0 A)(0.50 m)=0.5882.00 T=0.294 TB = \frac{m g}{I L} = \frac{0.588\text{ N}}{(4.0\text{ A})(0.50\text{ m})} = \frac{0.588}{2.00}\text{ T} = 0.294\text{ T}.

Loading workspace…