Resources

A block of mass m1=6.00 kgm_1 = 6.00\text{ kg} rests on a rough horizontal tabletop with coefficient of static friction μs=0.380\mu_s = 0.380 and kinetic friction μk=0.280\mu_k = 0.280. It is connected by an ideal light string passing over a frictionless, massless pulley at the edge of the table to a hanging bucket of mass m2=2.00 kgm_2 = 2.00\text{ kg}. Sand is slowly added to the hanging bucket. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the exact critical threshold mass of added sand Δmcrit\Delta m_{\text{crit}} required to trigger impending motion, and determine the initial non-equilibrium acceleration aa of the system immediately after slipping commences at this threshold.

Answer and steps

Final answer

Δmcrit=0.280 kg\Delta m_{\text{crit}} = 0.280\text{ kg}; immediate non-equilibrium acceleration a=0.710 m/s2a = 0.710\text{ m/s}^2

Steps

01

Establish the Condition for Impending Motion

Before the system moves, it is in static equilibrium. The forces acting on the block on the horizontal table (m1m_1) in the vertical direction are balanced: FN=m1gF_N = m_1 g

The tension TT in the light string provides the horizontal pulling force on m1m_1. At the same time, the hanging bucket and sand have a total mass Mhang=m2+ΔmM_{\text{hang}} = m_2 + \Delta m. In equilibrium: T=MhanggT = M_{\text{hang}} g

Motion begins when the tension exceeds the maximum possible force of static friction fs,maxf_{s,\text{max}} between block m1m_1 and the table surface: fs,max=μsFN=μsm1gf_{s,\text{max}} = \mu_s F_N = \mu_s m_1 g

At the threshold of impending motion: Mhangg=μsm1g  ⟹  Mhang=μsm1M_{\text{hang}} g = \mu_s m_1 g \implies M_{\text{hang}} = \mu_s m_1


02

Calculate the Critical Added Mass of Sand (Δmcrit\Delta m_{\text{crit}})

Substitute the given values for block m1m_1 and the static coefficient: Mhang=0.380⋅6.00 kg=2.280 kgM_{\text{hang}} = 0.380 \cdot 6.00\text{ kg} = 2.280\text{ kg}

The initial mass of the hanging bucket is m2=2.00 kgm_2 = 2.00\text{ kg}. Therefore, the critical mass of sand added is: Δmcrit=Mhang−m2=2.280 kg−2.00 kg=0.280 kg\Delta m_{\text{crit}} = M_{\text{hang}} - m_2 = 2.280\text{ kg} - 2.00\text{ kg} = 0.280\text{ kg}


03

Analyze the Non-Equilibrium State Immediately After Slipping

As soon as relative motion begins, the friction force suddenly drops from the maximum static friction fs,maxf_{s,\text{max}} to kinetic friction fkf_k: fk=μkFN=μkm1gf_k = \mu_k F_N = \mu_k m_1 g

Calculate fkf_k: fk=0.280⋅(6.00 kg⋅9.80 m/s2)=0.280⋅58.8 N=16.464 Nf_k = 0.280 \cdot (6.00\text{ kg} \cdot 9.80\text{ m/s}^2) = 0.280 \cdot 58.8\text{ N} = 16.464\text{ N}

The downward gravitational force exerted by the hanging mass remains: Fpull=Mhangg=2.280 kg⋅9.80 m/s2=22.344 NF_{\text{pull}} = M_{\text{hang}} g = 2.280\text{ kg} \cdot 9.80\text{ m/s}^2 = 22.344\text{ N}


04

Apply Newton's Second Law to Find the Initial Acceleration

Consider the entire system (block m1m_1 plus the hanging mass MhangM_{\text{hang}}) moving together with common acceleration aa. The net external force driving the motion along the string is: Fnet=Mhangg−fkF_{\text{net}} = M_{\text{hang}} g - f_k Fnet=22.344 N−16.464 N=5.880 NF_{\text{net}} = 22.344\text{ N} - 16.464\text{ N} = 5.880\text{ N}

The total inertial mass of the accelerating system is: mtot=m1+Mhang=6.00 kg+2.280 kg=8.280 kgm_{\text{tot}} = m_1 + M_{\text{hang}} = 6.00\text{ kg} + 2.280\text{ kg} = 8.280\text{ kg}

Applying Newton's second law (Fnet=mtotaF_{\text{net}} = m_{\text{tot}} a): a=Fnetmtot=5.880 N8.280 kg≈0.710 m/s2a = \frac{F_{\text{net}}}{m_{\text{tot}}} = \frac{5.880\text{ N}}{8.280\text{ kg}} \approx 0.710\text{ m/s}^2

Common Pitfall: A frequent mistake is using only m1m_1 or forgetting to include the added sand mass Δmcrit\Delta m_{\text{crit}} when computing the total accelerating mass mtotm_{\text{tot}}. The hanging bucket along with the added sand must accelerate at the same rate as the block.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets that the bucket already has mass m2 = 2.00 kg and equates the maximum static friction directly to the weight of the added sand.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    fsmax⁡=μs⋅m1⋅g=0.380⋅6.00⋅9.80=22.344 Nf_{s\max} = \mu_s \cdot m_1 \cdot g = 0.380 \cdot 6.00 \cdot 9.80 = 22.344\text{ N}

  2. Step 2

    Δmcrit⋅g=fsmax⁡  ⟹  Δmcrit=0.380⋅6.00=2.28 kg\Delta m_{\text{crit}} \cdot g = f_{s\max} \implies \Delta m_{\text{crit}} = 0.380 \cdot 6.00 = 2.28\text{ kg}

    Correct

    Mhangg=fs,max⁡  ⟹  (m2+Δmcrit)=μsm1  ⟹  Δmcrit=2.280 kg−2.00 kg=0.280 kgM_{\text{hang}} g = f_{s,\max} \implies (m_2 + \Delta m_{\text{crit}}) = \mu_s m_1 \implies \Delta m_{\text{crit}} = 2.280\text{ kg} - 2.00\text{ kg} = 0.280\text{ kg}

    You equated the maximum static friction directly to the weight of the added sand Δmcritg\Delta m_{\text{crit}} g. The total downward hanging force is produced by the bucket and the added sand combined, (m2+Δmcrit)g(m_2 + \Delta m_{\text{crit}}) g.

  3. Step 3

    fk=μk⋅m1⋅g=0.280⋅6.00⋅9.80=16.464 N  ⟹  mhang=m2+Δmcrit=2.00+2.28=4.28 kgf_k = \mu_k \cdot m_1 \cdot g = 0.280 \cdot 6.00 \cdot 9.80 = 16.464\text{ N} \implies m_{\text{hang}} = m_2 + \Delta m_{\text{crit}} = 2.00 + 2.28 = 4.28\text{ kg}

    Correct

    fk=μkm1g=16.464 Nf_k = \mu_k m_1 g = 16.464\text{ N}, with total hanging mass Mhang=m2+Δmcrit=2.00 kg+0.280 kg=2.280 kgM_{\text{hang}} = m_2 + \Delta m_{\text{crit}} = 2.00\text{ kg} + 0.280\text{ kg} = 2.280\text{ kg}

    Your formula for kinetic friction is correct, but your value for mhangm_{\text{hang}} was inflated because you added m2m_2 to an already total critical mass of 2.28 kg2.28\text{ kg}.

  4. Step 4

    a=mhang⋅g−fkm1+mhang=4.28⋅9.80−16.4646.00+4.28=41.944−16.46410.28=2.48 m/s2a = \frac{m_{\text{hang}} \cdot g - f_k}{m_1 + m_{\text{hang}}} = \frac{4.28 \cdot 9.80 - 16.464}{6.00 + 4.28} = \frac{41.944 - 16.464}{10.28} = 2.48\text{ m/s}^2

    Correct

    a=Mhangg−fkm1+Mhang=22.344 N−16.464 N6.00 kg+2.280 kg=5.880 N8.280 kg≈0.710 m/s2a = \frac{M_{\text{hang}} g - f_k}{m_1 + M_{\text{hang}}} = \frac{22.344\text{ N} - 16.464\text{ N}}{6.00\text{ kg} + 2.280\text{ kg}} = \frac{5.880\text{ N}}{8.280\text{ kg}} \approx 0.710\text{ m/s}^2

    Your algebraic setup using Newton's second law for the connected system is fully correct, but the numerical result is affected by the incorrect value of mhangm_{\text{hang}} carried over from Step 2.

WHAT YOU DID WELL
Compliments from Your Teacher

You calculated the maximum static friction and kinetic friction forces correctly.

You correctly formulated the equation of motion for the coupled two-body system using Newton's second law.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of existing tare mass in equilibrium balance

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the critical hanging mass required to overcome static friction as purely the added sand Δmcrit\Delta m_{\text{crit}}, overlooking that the hanging bucket already provides an initial tare mass of m2=2.00 kgm_2 = 2.00\text{ kg}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Account for Tare Mass in Equilibrium Equations
  • When an object or container is already present, the total active mass is M=mcontainer+ΔmcontentsM = m_{\text{container}} + \Delta m_{\text{contents}}.

  • Always write the total mass explicitly as Mhang=mbucket+ΔmM_{\text{hang}} = m_{\text{bucket}} + \Delta m before equating hanging weight to static friction.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set the total hanging gravitational force equal to the maximum static friction: (m2+Δmcrit)g=μsm1g(m_2 + \Delta m_{\text{crit}}) g = \mu_s m_1 g.

  2. Divide by gg to find total hanging mass: m2+Δmcrit=μsm1=0.380⋅6.00 kg=2.280 kgm_2 + \Delta m_{\text{crit}} = \mu_s m_1 = 0.380 \cdot 6.00\text{ kg} = 2.280\text{ kg}.

  3. Subtract the bucket's mass: Δmcrit=2.280 kg−2.00 kg=0.280 kg\Delta m_{\text{crit}} = 2.280\text{ kg} - 2.00\text{ kg} = 0.280\text{ kg}.

  4. Compute the total hanging mass during motion: Mhang=2.280 kgM_{\text{hang}} = 2.280\text{ kg}.

  5. Apply Newton's second law to the system: a=Mhangg−μkm1gm1+Mhang=22.344−16.4646.00+2.280=5.8808.280≈0.710 m/s2a = \frac{M_{\text{hang}} g - \mu_k m_1 g}{m_1 + M_{\text{hang}}} = \frac{22.344 - 16.464}{6.00 + 2.280} = \frac{5.880}{8.280} \approx 0.710\text{ m/s}^2.

Final answer

Δmcrit=0.280 kg\Delta m_{\text{crit}} = 0.280\text{ kg}, a=0.710 m/s2a = 0.710\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Draw an explicit free-body diagram for the hanging mass identifying total mass as m2+Δmm_2 + \Delta m before solving for unknown mass increments.

  • Practice distinguishing between total required mass and incremental added mass in equilibrium threshold problems.

OverviewACEpath Teacher's Diagnosis

02 The student divides the net force by only the mass of block 1 instead of the total accelerating mass of the connected system when finding acceleration.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    (m2+Δmcrit)g=μsm1g  ⟹  2.00+Δmcrit=0.380⋅6.00  ⟹  2.00+Δmcrit=2.28  ⟹  Δmcrit=0.280 kg(m_2 + \Delta m_{\text{crit}}) g = \mu_s m_1 g \implies 2.00 + \Delta m_{\text{crit}} = 0.380 \cdot 6.00 \implies 2.00 + \Delta m_{\text{crit}} = 2.28 \implies \Delta m_{\text{crit}} = 0.280\text{ kg}

  2. Step 2

    fk=μkm1g=0.280⋅6.00⋅9.80=16.464 N  ⟹  Fnet=(m2+Δmcrit)g−fk=2.28⋅9.80−16.464=5.88 Nf_k = \mu_k m_1 g = 0.280 \cdot 6.00 \cdot 9.80 = 16.464\text{ N} \implies F_{\text{net}} = (m_2 + \Delta m_{\text{crit}}) g - f_k = 2.28 \cdot 9.80 - 16.464 = 5.88\text{ N}

  3. Step 3

    a=Fnetm1  ⟹  a=5.886.00=0.980 m/s2a = \frac{F_{\text{net}}}{m_1} \implies a = \frac{5.88}{6.00} = 0.980\text{ m/s}^2

    Correct

    a=Fnetmtot=Fnetm1+m2+Δmcrit=5.880 N6.00 kg+2.280 kg≈0.710 m/s2a = \frac{F_{\text{net}}}{m_{\text{tot}}} = \frac{F_{\text{net}}}{m_1 + m_2 + \Delta m_{\text{crit}}} = \frac{5.880\text{ N}}{6.00\text{ kg} + 2.280\text{ kg}} \approx 0.710\text{ m/s}^2

    Because the block and the hanging mass are linked by an inextensible taut string, they accelerate together. The inertia resisting the net driving force is the sum of both masses (mtot=m1+m2+Δmcrit=8.280 kgm_{\text{tot}} = m_1 + m_2 + \Delta m_{\text{crit}} = 8.280\text{ kg}), not just m1m_1.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly established the equilibrium condition for impending motion using static friction.

You correctly determined that the critical mass of added sand is Δmcrit=0.280 kg\Delta m_{\text{crit}} = 0.280\text{ kg}.

You correctly calculated the kinetic friction force fk=16.464 Nf_k = 16.464\text{ N} and the net driving force Fnet=5.88 NF_{\text{net}} = 5.88\text{ N}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted Connected Mass in Newton's Second Law

You set the accelerating mass equal to only m1m_1 instead of the combined mass mtot=m1+Mhangm_{\text{tot}} = m_1 + M_{\text{hang}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You isolated block 1 when applying Newton's second law with the external net driving force, overlooking that the tension is an internal force to the combined system and that both bodies must accelerate at the exact same magnitude.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify the system boundaries
  • When applying Fnet=maF_{\text{net}} = m a to an entire connected system, the inertial mass mm must include every mass that accelerates.

  • Check whether all connected objects are accelerating together; if so, use mtot=∑mim_{\text{tot}} = \sum m_i.

Verify consistency with isolated free-body diagrams
  • If you analyze block 1 alone, the horizontal equation is T−fk=m1aT - f_k = m_1 a, which requires finding the string tension TT, not using FnetF_{\text{net}} directly.

  • Confirm that string tension TT is not confused with the net external force driving the whole system.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the total accelerating mass: mtot=m1+(m2+Δmcrit)=6.00 kg+2.280 kg=8.280 kgm_{\text{tot}} = m_1 + (m_2 + \Delta m_{\text{crit}}) = 6.00\text{ kg} + 2.280\text{ kg} = 8.280\text{ kg}

  2. Apply Newton's second law to the entire system: a=Fnetmtot=5.880 N8.280 kga = \frac{F_{\text{net}}}{m_{\text{tot}}} = \frac{5.880\text{ N}}{8.280\text{ kg}}

  3. Evaluate the quotient: a≈0.710 m/s2a \approx 0.710\text{ m/s}^2

Final answer

Δmcrit=0.280 kg\Delta m_{\text{crit}} = 0.280\text{ kg}, a=0.710 m/s2a = 0.710\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Whenever you analyze connected bodies via a single net external force equation, double-check that the denominator contains the sum of all accelerating masses.

  • Practice setting up separate free-body diagrams for each block to see how the internal tension cancels out when you sum their equations.

OverviewACEpath Teacher's Diagnosis

03 The student mistakenly uses the coefficient of kinetic friction instead of static friction to calculate the critical threshold mass needed to initiate motion.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    (m2+Δmcrit)⋅g=μk⋅m1⋅g  ⟹  2.00+Δmcrit=0.280⋅6.00=1.68  ⟹  Δmcrit=−0.320 kg(m_2 + \Delta m_{\text{crit}}) \cdot g = \mu_k \cdot m_1 \cdot g \implies 2.00 + \Delta m_{\text{crit}} = 0.280 \cdot 6.00 = 1.68 \implies \Delta m_{\text{crit}} = -0.320\text{ kg}

    Correct

    (m2+Δmcrit)⋅g=μs⋅m1⋅g  ⟹  2.00+Δmcrit=0.380⋅6.00=2.280 kg  ⟹  Δmcrit=0.280 kg(m_2 + \Delta m_{\text{crit}}) \cdot g = \mu_s \cdot m_1 \cdot g \implies 2.00 + \Delta m_{\text{crit}} = 0.380 \cdot 6.00 = 2.280\text{ kg} \implies \Delta m_{\text{crit}} = 0.280\text{ kg}

    To trigger impending motion from rest, the hanging weight must overcome the maximum static friction force (fs,max=μsm1gf_{s,\text{max}} = \mu_s m_1 g), not kinetic friction. Using μk=0.280\mu_k = 0.280 instead of μs=0.380\mu_s = 0.380 yields an unphysical negative added mass.

  2. Step 2

    fk=μk⋅m1⋅g=16.464 Nf_k = \mu_k \cdot m_1 \cdot g = 16.464\text{ N}, mhang=1.68 kg  ⟹  a=mhang⋅g−fkm1+mhang=1.68⋅9.80−16.4646.00+1.68=0 m/s2m_{\text{hang}} = 1.68\text{ kg} \implies a = \frac{m_{\text{hang}} \cdot g - f_k}{m_1 + m_{\text{hang}}} = \frac{1.68 \cdot 9.80 - 16.464}{6.00 + 1.68} = 0\text{ m/s}^2

    Correct

    mhang=2.280 kg  ⟹  a=mhang⋅g−fkm1+mhang=2.280⋅9.80−16.4646.00+2.280=5.8808.280≈0.710 m/s2m_{\text{hang}} = 2.280\text{ kg} \implies a = \frac{m_{\text{hang}} \cdot g - f_k}{m_1 + m_{\text{hang}}} = \frac{2.280 \cdot 9.80 - 16.464}{6.00 + 2.280} = \frac{5.880}{8.280} \approx 0.710\text{ m/s}^2

    Your algebraic formula for system acceleration a=mhangg−fkm1+mhanga = \frac{m_{\text{hang}} g - f_k}{m_1 + m_{\text{hang}}} is fully correct. However, because mhangm_{\text{hang}} was previously calculated from μk\mu_k, the driving force mhanggm_{\text{hang}} g was mathematically identical to fkf_k, resulting in an acceleration of zero.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly formulated Newton's second law for the coupled two-body system using a=Fnetmtotala = \frac{F_{\text{net}}}{m_{\text{total}}}.

You accurately computed the kinetic friction force fk=μkm1g=16.464 Nf_k = \mu_k m_1 g = 16.464\text{ N}.

You tracked the total inertial mass of the system (m1+mhangm_1 + m_{\text{hang}}) in the denominator of the acceleration equation.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Static vs Kinetic Friction Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the static friction coefficient μs\mu_s (which dictates the threshold of impending motion while surfaces are stationary) with the kinetic friction coefficient μk\mu_k (which acts only once sliding has commenced).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identifying the State of Motion
  • Use static friction μs\mu_s whenever an object is stationary or at the verge of slipping (v=0v = 0). Switch to kinetic friction μk\mu_k strictly after sliding begins (v≠0v \neq 0).

  • Before writing friction equations, explicitly identify whether the system is in static equilibrium (f≤μsFNf \le \mu_s F_N) or undergoing relative sliding (fk=μkFNf_k = \mu_k F_N).

Physical Sanity Check
  • Adding mass to trigger motion must result in Δmcrit≥0\Delta m_{\text{crit}} \ge 0, and overcoming static friction produces an immediate non-zero acceleration because μs>μk\mu_s > \mu_k.

  • Check your intermediate values: a negative added mass Δmcrit=−0.320 kg\Delta m_{\text{crit}} = -0.320\text{ kg} indicates that the equilibrium condition was set up incorrectly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up impending motion using the maximum static friction limit: (m2+Δmcrit)g=μsm1g(m_2 + \Delta m_{\text{crit}}) g = \mu_s m_1 g

  2. Solve for the critical sand mass: Δmcrit=μsm1−m2=0.380(6.00)−2.00=2.280−2.00=0.280 kg\Delta m_{\text{crit}} = \mu_s m_1 - m_2 = 0.380(6.00) - 2.00 = 2.280 - 2.00 = 0.280\text{ kg}

  3. Determine total hanging mass at slipping: mhang=2.280 kgm_{\text{hang}} = 2.280\text{ kg}

  4. Compute net accelerating force immediately after slip: Fnet=mhangg−μkm1g=2.280(9.80)−16.464=22.344−16.464=5.880 NF_{\text{net}} = m_{\text{hang}} g - \mu_k m_1 g = 2.280(9.80) - 16.464 = 22.344 - 16.464 = 5.880\text{ N}

  5. Compute acceleration using total mass: a=5.880 N6.00 kg+2.280 kg=5.8808.280≈0.710 m/s2a = \frac{5.880\text{ N}}{6.00\text{ kg} + 2.280\text{ kg}} = \frac{5.880}{8.280} \approx 0.710\text{ m/s}^2

Final answer

Δmcrit=0.280 kg\Delta m_{\text{crit}} = 0.280\text{ kg}, a=0.710 m/s2a = 0.710\text{ m/s}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always label static and kinetic friction equations separately before substituting numerical coefficients.

  • Perform a sign and reality check on added masses: Δm\Delta m cannot be negative when adding sand.

  • Practice identifying the sudden force drop from fs,maxf_{s,\text{max}} to fkf_k that causes non-zero initial acceleration.

Lock it in

Similar question

01

A 4.00 kg4.00\text{ kg} block sits on a horizontal surface where μs=0.400\mu_s = 0.400 and μk=0.300\mu_k = 0.300. It is tied to a hanging pan of mass 0.600 kg0.600\text{ kg}. Sand is added to the pan until slipping begins. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, find the mass of sand added Δm\Delta m and the initial acceleration aa once motion starts.

Answer

Δm=1.00 kg\Delta m = 1.00\text{ kg}, a=0.700 m/s2a = 0.700\text{ m/s}^2. Total critical hanging mass Mhang=μsm1=0.400(4.00)=1.60 kgM_{\text{hang}} = \mu_s m_1 = 0.400(4.00) = 1.60\text{ kg}, so added sand Δm=1.60−0.600=1.00 kg\Delta m = 1.60 - 0.600 = 1.00\text{ kg}. Once slipping, fk=0.300(4.00)(9.80)=11.76 Nf_k = 0.300(4.00)(9.80) = 11.76\text{ N}. Net force Fnet=1.60(9.80)−11.76=3.92 NF_{\text{net}} = 1.60(9.80) - 11.76 = 3.92\text{ N}. Total mass mtot=4.00+1.60=5.60 kgm_{\text{tot}} = 4.00 + 1.60 = 5.60\text{ kg}. Acceleration a=3.92/5.60=0.700 m/s2a = 3.92 / 5.60 = 0.700\text{ m/s}^2.

02

A 5.00 kg5.00\text{ kg} cart rests on a horizontal track with static friction coefficient μs=0.250\mu_s = 0.250 and kinetic friction coefficient μk=0.150\mu_k = 0.150. A light rope connects it over a frictionless pulley to a hanging bucket of mass 0.500 kg0.500\text{ kg}. Water drips slowly into the bucket. When motion is initiated, water flow instantly stops. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, determine the critical mass of water added and the system's initial acceleration.

Answer

Critical water mass Δm=0.750 kg\Delta m = 0.750\text{ kg}, a=0.784 m/s2a = 0.784\text{ m/s}^2. Total hanging mass at threshold M=μsmcart=0.250(5.00)=1.25 kgM = \mu_s m_{\text{cart}} = 0.250(5.00) = 1.25\text{ kg}, giving Δm=1.25−0.500=0.750 kg\Delta m = 1.25 - 0.500 = 0.750\text{ kg}. Driving force is Mg=1.25(9.80)=12.25 NM g = 1.25(9.80) = 12.25\text{ N}. Opposing friction is fk=0.150(5.00)(9.80)=7.35 Nf_k = 0.150(5.00)(9.80) = 7.35\text{ N}. Net force is 4.90 N4.90\text{ N}, and total accelerating mass is 5.00+1.25=6.25 kg5.00 + 1.25 = 6.25\text{ kg}. Acceleration a=4.90/6.25=0.784 m/s2a = 4.90 / 6.25 = 0.784\text{ m/s}^2.

03

A 8.00 kg8.00\text{ kg} block is on a table with μs=0.350\mu_s = 0.350 and μk=0.200\mu_k = 0.200. An empty container of mass 1.20 kg1.20\text{ kg} hangs from the connected string. Lead pellets of mass 0.100 kg0.100\text{ kg} each are added one by one. Taking g=9.80 m/s2g = 9.80\text{ m/s}^2, how many whole pellets are needed to induce slipping, and what is the exact acceleration immediately after that final pellet is dropped?

Answer

16 pellets16\text{ pellets}, a=1.09 m/s2a = 1.09\text{ m/s}^2. Total hanging mass required to exceed static friction is M>μsm1=0.350(8.00)=2.80 kgM > \mu_s m_1 = 0.350(8.00) = 2.80\text{ kg}. The mass of pellets needed is Δm>2.80−1.20=1.60 kg\Delta m > 2.80 - 1.20 = 1.60\text{ kg}. Since pellets are added discreetly to trigger motion, 1616 pellets provide exactly 1.60 kg1.60\text{ kg} (impending threshold) or 1717 pellets exceed it; strictly to initiate motion beyond static equilibrium, adding the 17th pellet yields 1.70 kg1.70\text{ kg} (M=2.90 kgM = 2.90\text{ kg}, a=1.17 m/s2a = 1.17\text{ m/s}^2). If motion begins at the threshold (16 pellets16\text{ pellets}, M=2.80 kgM = 2.80\text{ kg}): Fnet=2.80(9.80)−0.200(8.00)(9.80)=27.44−15.68=11.76 NF_{\text{net}} = 2.80(9.80) - 0.200(8.00)(9.80) = 27.44 - 15.68 = 11.76\text{ N}, mtot=10.80 kgm_{\text{tot}} = 10.80\text{ kg}, a=11.76/10.80≈1.09 m/s2a = 11.76 / 10.80 \approx 1.09\text{ m/s}^2.

Loading workspace…