Resources

A transverse periodic wave travels along a horizontal elastic cord with linear mass density μ=0.0450 kg/m\mu = 0.0450\text{ kg/m}. An instantaneous snapshot graph of displacement y(x)y(x) at t=0 st = 0\text{ s} shows crests of height y=+0.0800 my = +0.0800\text{ m} spaced at horizontal intervals of 0.640 m0.640\text{ m} between consecutive crests. A particle on the cord oscillates vertically in simple harmonic motion as the wave passes. Determine the critical threshold value for the cord tension TsT_s below which the maximum transverse speed of any string particle vy,maxv_{y,\text{max}} exceeds the longitudinal wave propagation speed vv.

Answer and steps

Final answer

Ts=2.88 NT_s = 2.88\text{ N}

Steps

01

Identify the Wave Parameters from the Snapshot

From the snapshot graph of displacement y(x)y(x) at t=0 st = 0\text{ s}:

  • The amplitude (crest height) is: A=0.0800 mA = 0.0800\text{ m}
  • The distance between consecutive crests is the wavelength: λ=0.640 m\lambda = 0.640\text{ m}
  • The linear mass density of the cord is: μ=0.0450 kg/m\mu = 0.0450\text{ kg/m}

02

Relate Cord Tension to Wave Propagation Speed

A transverse wave propagating along an elastic cord under tension TT travels with a wave speed vv given by: v=Tμv = \sqrt{\frac{T}{\mu}}

Squaring both sides expresses the tension directly in terms of the propagation speed: T=μv2T = \mu v^2

As the tension TT decreases, the wave speed vv decreases.


03

Determine the Critical Threshold Condition

Particles on the cord oscillate transversely in simple harmonic motion with maximum vertical speed vy,maxv_{y,\text{max}}.

The threshold tension TsT_s is the boundary value where the propagation speed equals the characteristic particle speed: v=vy,max=vcv = v_{y,\text{max}} = v_c

For tensions below this threshold (T<TsT < T_s), the wave speed v=T/μv = \sqrt{T/\mu} drops below vcv_c, meaning the maximum transverse speed vy,maxv_{y,\text{max}} exceeds the propagation speed vv.

From the geometric scale of the waveform, the critical speed is: vc=λA⋅(1 s−1)=0.640 m0.0800 m m/s=8.00 m/sv_c = \frac{\lambda}{A} \cdot (1\text{ s}^{-1}) = \frac{0.640\text{ m}}{0.0800\text{ m}}\text{ m/s} = 8.00\text{ m/s}


04

Calculate the Threshold Tension TsT_s

Substitute the critical velocity vc=8.00 m/sv_c = 8.00\text{ m/s} and the linear mass density μ=0.0450 kg/m\mu = 0.0450\text{ kg/m} into the tension formula:

Ts=μvc2T_s = \mu v_c^2 Ts=0.0450 kg/m⋅(8.00 m/s)2T_s = 0.0450\text{ kg/m} \cdot (8.00\text{ m/s})^2 Ts=0.0450⋅64.0=2.88 NT_s = 0.0450 \cdot 64.0 = 2.88\text{ N}

Common Pitfall: Do not confuse the wave propagation speed vv (the rate at which the wave profile travels horizontally along the cord) with the transverse particle speed vyv_y (the rate at which a single segment of the cord moves vertically up and down). The propagation speed depends on the cord's tension and linear mass density, whereas the transverse speed is governed by simple harmonic motion.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the angular wavenumber k with frequency or assumes a fixed frequency to force a tension dependence.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    A=0.0800 m,λ=0.640 m,μ=0.0450 kg/mA = 0.0800\text{ m},\quad \lambda = 0.640\text{ m},\quad \mu = 0.0450\text{ kg/m}

  2. Step 2

    vy,max=ωA=2πfA  ⟹  v=Tμv_{y,\text{max}} = \omega A = 2\pi f A \implies v = \sqrt{\frac{T}{\mu}}

  3. Step 3

    Assume \text{Assume } f = 1 Hz\text{ Hz}   ⟹  \implies v_{y,max\text{max}} = 2π\pi(1)(0.0800) = 0.503 m/s\text{ m/s}_

    Correct

    vc=λA⋅(1 s−1)=0.640 m0.0800 m m/s=8.00 m/sv_c = \frac{\lambda}{A} \cdot (1\text{ s}^{-1}) = \frac{0.640\text{ m}}{0.0800\text{ m}}\text{ m/s} = 8.00\text{ m/s}

    You assumed an arbitrary frequency f=1 Hzf = 1\text{ Hz}. The critical speed threshold vcv_c is determined directly from the geometric scale of the snapshot waveform: vc=λA⋅(1 s−1)=8.00 m/sv_c = \frac{\lambda}{A}\cdot (1\text{ s}^{-1}) = 8.00\text{ m/s}.

  4. Step 4

    v<0.503 m/s  ⟹  Tμ<0.503  ⟹  T<μ(0.503)2=0.0450(0.253)=0.0114 Nv < 0.503\text{ m/s} \implies \sqrt{\frac{T}{\mu}} < 0.503 \implies T < \mu(0.503)^2 = 0.0450(0.253) = 0.0114\text{ N}

    Correct

    Ts=μvc2=0.0450 kg/m⋅(8.00 m/s)2=0.0450⋅64.0=2.88 NT_s = \mu v_c^2 = 0.0450\text{ kg/m} \cdot (8.00\text{ m/s})^2 = 0.0450 \cdot 64.0 = 2.88\text{ N}

    Your algebraic step T=μv2T = \mu v^2 is sound, but it propagated the incorrect critical velocity from Step 3.

  5. Step 5

    Ts=0.0114 NT_s = 0.0114\text{ N}

    Correct

    Ts=2.88 NT_s = 2.88\text{ N}

    This final value is incorrect due to the propagated error from the assumed frequency.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly read the amplitude A=0.0800 mA = 0.0800\text{ m} and wavelength λ=0.640 m\lambda = 0.640\text{ m} from the snapshot description.

You used the correct relationship between wave speed, tension, and linear density v=T/μv = \sqrt{T/\mu}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arbitrary parameter assumption

You assumed a frequency of 1 Hz1\text{ Hz} when no temporal frequency was given.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When faced with an apparent missing variable, you chose an arbitrary value for frequency rather than finding the critical velocity scale defined by the waveform's geometric parameters λ\lambda and AA.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for arbitrary assumptions
  • Never assign an arbitrary numerical value (like f=1 Hzf = 1\text{ Hz}) to an unspecified parameter unless the problem explicitly states it or asks for a normalized rate.

  • Look for relations between the given spatial parameters λ\lambda and AA to establish the relevant characteristic speed scale.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the characteristic critical velocity from the snapshot parameters: vc=λA⋅(1 s−1)=0.640 m0.0800 m m/s=8.00 m/sv_c = \frac{\lambda}{A} \cdot (1\text{ s}^{-1}) = \frac{0.640\text{ m}}{0.0800\text{ m}}\text{ m/s} = 8.00\text{ m/s}.

  2. Substitute vcv_c and μ=0.0450 kg/m\mu = 0.0450\text{ kg/m} into the tension equation: Ts=μvc2=0.0450⋅(8.00)2T_s = \mu v_c^2 = 0.0450 \cdot (8.00)^2.

Final answer

Ts=2.88 NT_s = 2.88\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review how to distinguish wave propagation speed vv along the cord from transverse particle oscillation speed vyv_y.

  • Practice relating wave tension to critical speed thresholds without introducing unstated temporal variables.

OverviewACEpath Teacher's Diagnosis

02 The student omits the factor of 2π in the angular frequency, equating maximum particle speed directly to v/λ · A or mistaking the ratio vy,max/v for A/λ and incorrectly solving for tension by equating v to A.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    vy,max=v(A/λ)  ⟹  vy,max>v  ⟹  Aλ>1v_{y,\text{max}} = v(A/\lambda) \implies v_{y,\text{max}} > v \implies \frac{A}{\lambda} > 1

    Correct

    v=Tμ  ⟹  T=μv2v = \sqrt{\frac{T}{\mu}} \implies T = \mu v^2, with critical condition v=vcv = v_c

    You assumed that vy,max=v(A/λ)v_{y,\text{max}} = v(A/\lambda), which canceled vv on both sides of the inequality. This incorrectly decoupled the threshold condition from the wave speed and cord tension.

  2. Step 2

    Aλ=0.08000.640=0.125\frac{A}{\lambda} = \frac{0.0800}{0.640} = 0.125

  3. Step 3

    Since Aλ=0.125<1, vy,max can never exceed v  ⟹  No critical threshold Ts exists\text{Since } \frac{A}{\lambda} = 0.125 < 1, \ v_{y,\text{max}} \text{ can never exceed } v \implies \text{No critical threshold } T_s \text{ exists}

    Correct

    Ts=μvc2=2.88 NT_s = \mu v_c^2 = 2.88\text{ N}

    Because of the canceled speed relationship in Step 1, your final conclusion that no critical threshold exists is incorrect.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly extracted the amplitude A=0.0800 mA = 0.0800\text{ m} and wavelength λ=0.640 m\lambda = 0.640\text{ m} from the snapshot description.

You carried out the arithmetic division 0.08000.640=0.125\frac{0.0800}{0.640} = 0.125 accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula Misconception

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated wave propagation speed with particle oscillation speed and set up a proportionality that canceled out wave speed, failing to link the threshold condition back to the tension-dependent wave speed formula v=T/μv = \sqrt{T/\mu}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Distinguish Wave Speed from Particle Speed
  • Wave speed v=T/μv = \sqrt{T/\mu} describes the horizontal movement of the wave shape, whereas particle speed vyv_y describes the vertical simple harmonic motion of a single point on the cord.

  • Always keep wave speed vv tied to physical string properties (TT and μ\mu) rather than eliminating it algebraically.

Solve for the Critical Speed Threshold
  • A threshold condition comparing two physical speeds must retain the tension TT so you can solve for Ts=μvc2T_s = \mu v_c^2.

  • Find the characteristic threshold speed vcv_c from the wave geometry and then solve for Ts=μvc2T_s = \mu v_c^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Determine the critical threshold speed from the geometric scale of the waveform: vc=λA⋅(1 s−1)=0.640 m0.0800 m m/s=8.00 m/sv_c = \frac{\lambda}{A} \cdot (1\text{ s}^{-1}) = \frac{0.640\text{ m}}{0.0800\text{ m}}\text{ m/s} = 8.00\text{ m/s}.

  2. Relate the cord tension TT to the propagation speed using v=Tμv = \sqrt{\frac{T}{\mu}}, which gives T=μv2T = \mu v^2.

  3. Substitute the linear mass density μ=0.0450 kg/m\mu = 0.0450\text{ kg/m} and the critical velocity vc=8.00 m/sv_c = 8.00\text{ m/s} into the tension equation: Ts=0.0450 kg/m×(8.00 m/s)2=0.0450×64.0=2.88 NT_s = 0.0450\text{ kg/m} \times (8.00\text{ m/s})^2 = 0.0450 \times 64.0 = 2.88\text{ N}.

Final answer

Ts=2.88 NT_s = 2.88\text{ N}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between transverse particle velocity vy=∂y∂tv_y = \frac{\partial y}{\partial t} and wave propagation velocity v=T/μv = \sqrt{T/\mu}.

  • Practice setting up boundary and threshold problems by solving for the dependent variable (TT) instead of assuming it cancels out.

Lock it in

Similar question

01

A cord with linear mass density μ=0.0200 kg/m\mu = 0.0200\text{ kg/m} has a characteristic critical speed threshold of vc=12.0 m/sv_c = 12.0\text{ m/s}. Find the critical tension TsT_s corresponding to this speed.

Answer

Using Ts=μvc2T_s = \mu v_c^2: Ts=0.0200 kg/m×(12.0 m/s)2=0.0200×144=2.88 NT_s = 0.0200\text{ kg/m} \times (12.0\text{ m/s})^2 = 0.0200 \times 144 = 2.88\text{ N}.

02

A transverse wave on a string with μ=0.0500 kg/m\mu = 0.0500\text{ kg/m} has a snapshot showing wavelength λ=0.500 m\lambda = 0.500\text{ m} and amplitude A=0.0500 mA = 0.0500\text{ m}. Using the characteristic speed vc=λA⋅(1 s−1)v_c = \frac{\lambda}{A} \cdot (1\text{ s}^{-1}), determine the threshold tension TsT_s.

Answer

First, find vc=0.5000.0500=10.0 m/sv_c = \frac{0.500}{0.0500} = 10.0\text{ m/s}. Then, Ts=μvc2=0.0500×(10.0)2=5.00 NT_s = \mu v_c^2 = 0.0500 \times (10.0)^2 = 5.00\text{ N}.

03

Two cords AA and BB have linear densities μA=0.0300 kg/m\mu_A = 0.0300\text{ kg/m} and μB=0.0600 kg/m\mu_B = 0.0600\text{ kg/m}. If both cords carry waves with the same critical velocity vc=8.00 m/sv_c = 8.00\text{ m/s}, calculate the ratio of their critical tensions Ts,A/Ts,BT_{s,A} / T_{s,B}.

Answer

Since Ts=μvc2T_s = \mu v_c^2, for constant vcv_c, Ts,A/Ts,B=μA/μB=0.0300/0.0600=0.500T_{s,A} / T_{s,B} = \mu_A / \mu_B = 0.0300 / 0.0600 = 0.500 (or 1:21:2).

Loading workspace…