Resources

A sound wave of frequency f=1.00 kHzf = 1.00\text{ kHz} propagates through air at 20.0∘C20.0^\circ\text{C} (air density ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3 and speed of sound v=343 m/sv = 343\text{ m/s}). At a certain location, the sound intensity level is β=80.0 dB\beta = 80.0\text{ dB}. (a) Calculate the pressure variation amplitude Δpmax\Delta p_{\text{max}} of the sound wave at this location. (b) Calculate the corresponding displacement amplitude smaxs_{\text{max}} of the air molecules.

Answer and steps

Final answer

(a) Δpmax=2.87×10−2 Pa\Delta p_{\text{max}} = 2.87 \times 10^{-2}\text{ Pa}; (b) smax=1.11×10−8 ms_{\text{max}} = 1.11 \times 10^{-8}\text{ m}

Steps

Part (a): Pressure Variation Amplitude Δpmax\Delta p_{\text{max}}

  1. Find the sound intensity II from the decibel level: The sound intensity level β\beta in decibels (dB\text{dB}) is defined relative to the reference threshold of hearing I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2: β=(10 dB)log⁡10(II0)\beta = (10\text{ dB}) \log_{10}\left(\frac{I}{I_0}\right)

    Substitute β=80.0 dB\beta = 80.0\text{ dB}: 80.0=10log⁡10(I1.00×10−12 W/m2)80.0 = 10 \log_{10}\left(\frac{I}{1.00 \times 10^{-12}\text{ W/m}^2}\right) log⁡10(I1.00×10−12 W/m2)=8.00\log_{10}\left(\frac{I}{1.00 \times 10^{-12}\text{ W/m}^2}\right) = 8.00 I=(1.00×10−12 W/m2)×108.00=1.00×10−4 W/m2I = (1.00 \times 10^{-12}\text{ W/m}^2) \times 10^{8.00} = 1.00 \times 10^{-4}\text{ W/m}^2

  2. Relate sound intensity to pressure amplitude: The average intensity II of a longitudinal harmonic sound wave is related to the maximum pressure variation (gauge pressure amplitude) Δpmax\Delta p_{\text{max}} by: I=(Δpmax)22ρvI = \frac{(\Delta p_{\text{max}})^2}{2\rho v}

    Rearranging for Δpmax\Delta p_{\text{max}}: Δpmax=2ρvI\Delta p_{\text{max}} = \sqrt{2\rho v I}

  3. Substitute the given values: Δpmax=2⋅(1.20 kg/m3)⋅(343 m/s)⋅(1.00×10−4 W/m2)\Delta p_{\text{max}} = \sqrt{2 \cdot (1.20\text{ kg/m}^3) \cdot (343\text{ m/s}) \cdot (1.00 \times 10^{-4}\text{ W/m}^2)} Δpmax=8.232×10−2 Pa2≈2.87×10−2 Pa\Delta p_{\text{max}} = \sqrt{8.232 \times 10^{-2}\text{ Pa}^2} \approx 2.87 \times 10^{-2}\text{ Pa}

Part (b): Displacement Amplitude smaxs_{\text{max}}

  1. Relate pressure amplitude to particle displacement amplitude: The pressure amplitude Δpmax\Delta p_{\text{max}} is connected to the molecular displacement amplitude smaxs_{\text{max}} through the wave speed vv, medium density ρ\rho, and angular frequency ω=2πf\omega = 2\pi f: Δpmax=Bksmax=(ρv2)(ωv)smax=ρvωsmax=2πfρvsmax\Delta p_{\text{max}} = B k s_{\text{max}} = (\rho v^2)\left(\frac{\omega}{v}\right)s_{\text{max}} = \rho v \omega s_{\text{max}} = 2\pi f \rho v s_{\text{max}}
  2. Solve for smaxs_{\text{max}}: smax=Δpmax2πfρvs_{\text{max}} = \frac{\Delta p_{\text{max}}}{2\pi f \rho v}
  3. Substitute the numerical values: smax=2.869×10−2 Pa2π⋅(1.00×103 Hz)⋅(1.20 kg/m3)⋅(343 m/s)s_{\text{max}} = \frac{2.869 \times 10^{-2}\text{ Pa}}{2\pi \cdot (1.00 \times 10^3\text{ Hz}) \cdot (1.20\text{ kg/m}^3) \cdot (343\text{ m/s})} smax=2.869×10−22.586×106 m≈1.11×10−8 ms_{\text{max}} = \frac{2.869 \times 10^{-2}}{2.586 \times 10^6}\text{ m} \approx 1.11 \times 10^{-8}\text{ m}

(Note: Although an 80.0 dB80.0\text{ dB} sound is relatively loud—comparable to heavy traffic—the actual displacement of air molecules is extremely small, on the order of tens of nanometers).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets the factor of 2 in the relation between intensity and pressure amplitude, taking I = (Δp_max)² / (ρv), which leads to an underestimated pressure amplitude.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I=(10−12 W/m2)⋅1080.0/10=1.00×10−4 W/m2I = (10^{-12}\text{ W/m}^2) \cdot 10^{80.0/10} = 1.00 \times 10^{-4}\text{ W/m}^2

  2. Step 2

    I=(Δpmax)2ρv  ⟹  Δpmax=ρvI=1.20⋅343⋅1.00×10−4=0.203 PaI = \frac{(\Delta p_{\text{max}})^2}{\rho v} \implies \Delta p_{\text{max}} = \sqrt{\rho v I} = \sqrt{1.20 \cdot 343 \cdot 1.00 \times 10^{-4}} = 0.203\text{ Pa}

    Correct

    I=(Δpmax)22ρv  ⟹  Δpmax=2ρvI=2(1.20)(343)(1.00×10−4)≈0.287 PaI = \frac{(\Delta p_{\text{max}})^2}{2\rho v} \implies \Delta p_{\text{max}} = \sqrt{2\rho v I} = \sqrt{2(1.20)(343)(1.00 \times 10^{-4})} \approx 0.287\text{ Pa}

    Average sound intensity involves a time average of a squared sinusoidal function (⟨cos⁡2(ωt−kx)⟩=12\langle \cos^2(\omega t - kx) \rangle = \frac{1}{2}), which introduces a factor of 22 in the denominator: I=(Δpmax)22ρvI = \frac{(\Delta p_{\text{max}})^2}{2\rho v}.

  3. Step 3

    ω=2πf=2π⋅1000=6283 rad/s\omega = 2\pi f = 2\pi \cdot 1000 = 6283\text{ rad/s}

  4. Step 4

    smax=Δpmaxρωv=0.2031.20⋅6283⋅343=7.84×10−8 ms_{\text{max}} = \frac{\Delta p_{\text{max}}}{\rho \omega v} = \frac{0.203}{1.20 \cdot 6283 \cdot 343} = 7.84 \times 10^{-8}\text{ m}

    Correct

    smax=Δpmaxρωv=0.287(1.20)(6283)(343)≈1.11×10−7 ms_{\text{max}} = \frac{\Delta p_{\text{max}}}{\rho \omega v} = \frac{0.287}{(1.20)(6283)(343)} \approx 1.11 \times 10^{-7}\text{ m}

    Your relationship between displacement amplitude and pressure amplitude is correct, but your final value is affected by the earlier error in Δpmax\Delta p_{\text{max}}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the decibel level into physical intensity.

You correctly calculated the angular frequency from the cyclic frequency.

You properly identified and applied the relationship between pressure amplitude and particle displacement amplitude.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing Factor of 2 in Sound Intensity Formula

You omitted the factor of 2 in the denominator of the relation I=(Δpmax)22ρvI = \frac{(\Delta p_{\text{max}})^2}{2\rho v}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing peak/amplitude values with root-mean-square (rms) values when relating wave power/intensity to sinusoidal wave amplitudes, overlooking that the cycle average of cos⁡2(θ)\cos^2(\theta) yields a factor of 1/21/2.

REASONING PATH
Your ACEpath teacher’s suggested approach
Time-Average Factor in Harmonic Waves
  • For harmonic acoustic waves, intensity is the time average of instantaneous acoustic power per unit area: I=⟨Δp(t)⋅u(t)⟩=12(Δpmax)2ρvI = \langle \Delta p(t) \cdot u(t) \rangle = \frac{1}{2} \frac{(\Delta p_{\text{max}})^2}{\rho v}.

  • Always verify whether the pressure variable represents the maximum amplitude Δpmax\Delta p_{\text{max}} (requires a factor of 2) or the rms pressure Δprms\Delta p_{\text{rms}} (where I=(Δprms)2ρvI = \frac{(\Delta p_{\text{rms}})^2}{\rho v}).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Include the factor of 2: Δpmax=2ρvI\Delta p_{\text{max}} = \sqrt{2\rho v I}.

  2. Calculate Δpmax=2⋅1.20 kg/m3⋅343 m/s⋅1.00×10−4 W/m2=8.232×10−2≈0.287 Pa\Delta p_{\text{max}} = \sqrt{2 \cdot 1.20\text{ kg/m}^3 \cdot 343\text{ m/s} \cdot 1.00 \times 10^{-4}\text{ W/m}^2} = \sqrt{8.232 \times 10^{-2}} \approx 0.287\text{ Pa}.

  3. Substitute the corrected Δpmax\Delta p_{\text{max}} into the displacement formula: smax=0.287 Pa(1.20 kg/m3)(6283 rad/s)(343 m/s)≈1.11×10−7 ms_{\text{max}} = \frac{0.287\text{ Pa}}{(1.20\text{ kg/m}^3)(6283\text{ rad/s})(343\text{ m/s})} \approx 1.11 \times 10^{-7}\text{ m}.

Final answer

(a) Δpmax≈0.287 Pa\Delta p_{\text{max}} \approx 0.287\text{ Pa}; (b) smax≈1.11×10−7 ms_{\text{max}} \approx 1.11 \times 10^{-7}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of wave intensity I=12ρvω2smax2=(Δpmax)22ρvI = \frac{1}{2}\rho v \omega^2 s_{\text{max}}^2 = \frac{(\Delta p_{\text{max}})^2}{2\rho v} to remember where the factor of 1/21/2 comes from.

  • Practice converting between peak amplitudes and rms values in wave mechanics.

OverviewACEpath Teacher's Diagnosis

02 The student confuses linear frequency with angular frequency, using f instead of ω in the amplitude relation Δp_max = ρ f v s_max.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I=10−12⋅1080.010=1.00×10−4 W/m2I = 10^{-12} \cdot 10^{\frac{80.0}{10}} = 1.00 \times 10^{-4}\text{ W/m}^2

  2. Step 2

    Δpmax=2ρvI=2⋅1.20⋅343⋅1.00×10−4=0.287 Pa\Delta p_{\text{max}} = \sqrt{2\rho v I} = \sqrt{2 \cdot 1.20 \cdot 343 \cdot 1.00 \times 10^{-4}} = 0.287\text{ Pa}

  3. Step 3

    Δpmax=ρfvsmax  ⟹  smax=Δpmaxρfv\Delta p_{\text{max}} = \rho f v s_{\text{max}} \implies s_{\text{max}} = \frac{\Delta p_{\text{max}}}{\rho f v}

    Correct

    Δpmax=ρvωsmax=2πρfvsmax  ⟹  smax=Δpmax2πρfv\Delta p_{\text{max}} = \rho v \omega s_{\text{max}} = 2\pi \rho f v s_{\text{max}} \implies s_{\text{max}} = \frac{\Delta p_{\text{max}}}{2\pi \rho f v}

    The constitutive relation connecting pressure amplitude to displacement amplitude involves angular frequency ω\omega (or wavenumber k=ωvk = \frac{\omega}{v}), not ordinary frequency ff. Since ω=2πf\omega = 2\pi f, a factor of 2π2\pi is required in the denominator.

  4. Step 4

    smax=0.2871.20⋅1000⋅343=6.97×10−7 ms_{\text{max}} = \frac{0.287}{1.20 \cdot 1000 \cdot 343} = 6.97 \times 10^{-7}\text{ m}

    Correct

    smax=0.2872π⋅1.20⋅1000⋅343≈1.11×10−7 ms_{\text{max}} = \frac{0.287}{2\pi \cdot 1.20 \cdot 1000 \cdot 343} \approx 1.11 \times 10^{-7}\text{ m}

    Your numerical substitution was carried out correctly according to your formula, but the result is off by a factor of 2π2\pi due to the missing ω=2πf\omega = 2\pi f factor in Step 3.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the decibel equation to determine the sound intensity II.

You correctly related acoustic intensity to pressure amplitude and evaluated Δpmax\Delta p_{\text{max}}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Frequency vs. Angular Frequency Confusion

You wrote ff in place of angular frequency ω\omega in the pressure-displacement relation.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In wave mechanics, spatial and time derivatives introduce factors of wavenumber k=ωvk = \frac{\omega}{v} and angular frequency ω=2πf\omega = 2\pi f. Confusing linear frequency ff with angular frequency ω\omega omits the necessary 2π2\pi factor.

REASONING PATH
Your ACEpath teacher’s suggested approach
Pressure-Displacement Amplitude Link
  • Δpmax=Bksmax=(ρv2)(ωv)smax=ρvωsmax=2πρvfsmax\Delta p_{\text{max}} = B k s_{\text{max}} = (\rho v^2)\left(\frac{\omega}{v}\right)s_{\text{max}} = \rho v \omega s_{\text{max}} = 2\pi \rho v f s_{\text{max}}

  • Always replace ω\omega with 2πf2\pi f when working with cyclic frequencies given in hertz.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute ω=2πf\omega = 2\pi f into the amplitude relation: Δpmax=2πρvfsmax\Delta p_{\text{max}} = 2\pi \rho v f s_{\text{max}}.

  2. Solve for smaxs_{\text{max}}: smax=Δpmax2πρvfs_{\text{max}} = \frac{\Delta p_{\text{max}}}{2\pi \rho v f}.

  3. Substitute the numerical values: smax=0.2869 Pa2π⋅(1.20 kg/m3)⋅(343 m/s)⋅(1000 s−1)s_{\text{max}} = \frac{0.2869\text{ Pa}}{2\pi \cdot (1.20\text{ kg/m}^3) \cdot (343\text{ m/s}) \cdot (1000\text{ s}^{-1})}.

  4. Evaluate the quotient: smax≈1.11×10−7 ms_{\text{max}} \approx 1.11 \times 10^{-7}\text{ m}.

Final answer

(a) Δpmax=0.287 Pa\Delta p_{\text{max}} = 0.287\text{ Pa}; (b) smax=1.11×10−7 ms_{\text{max}} = 1.11 \times 10^{-7}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check every wave equation containing frequency to verify whether the formula requires angular frequency ω\omega (in rad/s\text{rad/s}) or linear frequency ff (in Hz\text{Hz}).

  • Derive Δpmax=ρvωsmax\Delta p_{\text{max}} = \rho v \omega s_{\text{max}} from the bulk modulus B=ρv2B = \rho v^2 and p=−B∂s∂xp = -B \frac{\partial s}{\partial x} to keep track of where the wavenumber k=ωvk = \frac{\omega}{v} enters.

OverviewACEpath Teacher's Diagnosis

03 The student uses the sound level value in decibels directly as intensity rather than converting through the logarithmic decibel formula.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    I=80.0 W/m2I = 80.0\text{ W/m}^2

    Correct

    I=I010β/10=(1.00×10−12 W/m2)×1080.0/10=1.00×10−4 W/m2I = I_0 10^{\beta / 10} = (1.00 \times 10^{-12}\text{ W/m}^2) \times 10^{80.0 / 10} = 1.00 \times 10^{-4}\text{ W/m}^2

    You equated the sound intensity level β=80.0 dB\beta = 80.0\text{ dB} directly to physical sound intensity in W/m2\text{W/m}^2. The decibel scale is logarithmic: β=10log⁡10(I/I0)\beta = 10\log_{10}(I/I_0), where I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2.

  2. Step 2

    Δpmax=2ρvI=2⋅1.20⋅343⋅80.0=256.6 Pa\Delta p_{\text{max}} = \sqrt{2\rho v I} = \sqrt{2 \cdot 1.20 \cdot 343 \cdot 80.0} = 256.6\text{ Pa}

    Correct

    Δpmax=2ρvI=2⋅1.20 kg/m3⋅343 m/s⋅1.00×10−4 W/m2≈2.87×10−2 Pa\Delta p_{\text{max}} = \sqrt{2\rho v I} = \sqrt{2 \cdot 1.20\text{ kg/m}^3 \cdot 343\text{ m/s} \cdot 1.00 \times 10^{-4}\text{ W/m}^2} \approx 2.87 \times 10^{-2}\text{ Pa}

    Your formula relating intensity to pressure variation amplitude is completely correct, but substituting the incorrect intensity value produced an overvalued pressure amplitude.

  3. Step 3

    ω=2πf=2π(1000)=6283 rad/s\omega = 2\pi f = 2\pi(1000) = 6283\text{ rad/s}

  4. Step 4

    smax=Δpmaxρωv=256.61.20⋅6283⋅343=9.92×10−5 ms_{\text{max}} = \frac{\Delta p_{\text{max}}}{\rho \omega v} = \frac{256.6}{1.20 \cdot 6283 \cdot 343} = 9.92 \times 10^{-5}\text{ m}

    Correct

    smax=Δpmaxρωv=2.87×10−2 Pa1.20 kg/m3⋅6283 rad/s⋅343 m/s≈1.11×10−8 ms_{\text{max}} = \frac{\Delta p_{\text{max}}}{\rho \omega v} = \frac{2.87 \times 10^{-2}\text{ Pa}}{1.20\text{ kg/m}^3 \cdot 6283\text{ rad/s} \cdot 343\text{ m/s}} \approx 1.11 \times 10^{-8}\text{ m}

    You used the correct equation relating displacement amplitude to pressure amplitude, but the numerical answer inherits the incorrect pressure amplitude from earlier.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship Δpmax=2ρvI\Delta p_{\text{max}} = \sqrt{2\rho v I} to connect intensity to pressure amplitude.

You accurately calculated the angular frequency ω=2πf\omega = 2\pi f.

You correctly applied the relationship smax=Δpmaxρωvs_{\text{max}} = \frac{\Delta p_{\text{max}}}{\rho \omega v} to find molecular displacement.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Decibel to Intensity Conversion Error

none

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated the sound intensity level in decibels (dB\text{dB}) as identical to linear sound intensity (II in W/m2\text{W/m}^2). The decibel scale is a logarithmic ratio comparing intensity to the threshold of hearing I0=10−12 W/m2I_0 = 10^{-12}\text{ W/m}^2, so you must invert the logarithm to solve for II.

REASONING PATH
Your ACEpath teacher’s suggested approach
Decibel Definition
  • β=(10 dB)log⁡10(II0)\beta = (10\text{ dB})\log_{10}\left(\frac{I}{I_0}\right), where I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2.

  • Always convert decibels into linear intensity I=I0×10β/10I = I_0 \times 10^{\beta / 10} before plugging into mechanical wave formulas.

Physical Reasonableness
  • Normal conversational sounds and traffic sound levels correspond to tiny microwatts or milliwatts per square meter.

  • Notice that an intensity of 80 W/m280\text{ W/m}^2 would exceed the threshold of pain (1 W/m21\text{ W/m}^2) by nearly two orders of magnitude.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert decibel level β=80.0 dB\beta = 80.0\text{ dB} to sound intensity: I=I010β/10=(1.00×10−12 W/m2)×108.00=1.00×10−4 W/m2I = I_0 10^{\beta / 10} = (1.00 \times 10^{-12}\text{ W/m}^2) \times 10^{8.00} = 1.00 \times 10^{-4}\text{ W/m}^2.

  2. Calculate pressure amplitude using correct intensity: Δpmax=2ρvI=2⋅(1.20)⋅(343)⋅(1.00×10−4)≈2.87×10−2 Pa\Delta p_{\text{max}} = \sqrt{2\rho v I} = \sqrt{2 \cdot (1.20) \cdot (343) \cdot (1.00 \times 10^{-4})} \approx 2.87 \times 10^{-2}\text{ Pa}.

  3. Calculate displacement amplitude using the corrected pressure amplitude: smax=Δpmaxρωv=2.87×10−2(1.20)⋅(2π×1000)⋅(343)≈1.11×10−8 ms_{\text{max}} = \frac{\Delta p_{\text{max}}}{\rho \omega v} = \frac{2.87 \times 10^{-2}}{(1.20) \cdot (2\pi \times 1000) \cdot (343)} \approx 1.11 \times 10^{-8}\text{ m}.

Final answer

(a) Δpmax=2.87×10−2 Pa\Delta p_{\text{max}} = 2.87 \times 10^{-2}\text{ Pa}; (b) smax=1.11×10−8 ms_{\text{max}} = 1.11 \times 10^{-8}\text{ m}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the logarithmic relation between sound intensity II and decibel level β\beta.

  • Practice converting sound levels given in decibels to W/m2\text{W/m}^2 before solving for physical wave amplitudes.

Lock it in

Similar question

01

A sound wave in air (ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3, v=340 m/sv = 340\text{ m/s}) has an intensity of I=2.00×10−3 W/m2I = 2.00 \times 10^{-3}\text{ W/m}^2. Calculate its pressure variation amplitude Δpmax\Delta p_{\text{max}}.

Answer

Δpmax=2ρvI=2⋅1.20⋅340⋅2.00×10−3=1.632≈1.28 Pa\Delta p_{\text{max}} = \sqrt{2\rho v I} = \sqrt{2 \cdot 1.20 \cdot 340 \cdot 2.00 \times 10^{-3}} = \sqrt{1.632} \approx 1.28\text{ Pa}.

02

A planar acoustic transducer in fresh water (ρ=1000 kg/m3\rho = 1000\text{ kg/m}^3, v=1500 m/sv = 1500\text{ m/s}) generates a pressure amplitude of Δpmax=3.00×104 Pa\Delta p_{\text{max}} = 3.00 \times 10^4\text{ Pa}. What is the average acoustic intensity II and sound intensity level β\beta relative to I0=1.00×10−12 W/m2I_0 = 1.00 \times 10^{-12}\text{ W/m}^2?

Answer

I=(Δpmax)22ρv=(3.00×104)22⋅1000⋅1500=9.00×1083.00×106=300 W/m2I = \frac{(\Delta p_{\text{max}})^2}{2\rho v} = \frac{(3.00 \times 10^4)^2}{2 \cdot 1000 \cdot 1500} = \frac{9.00 \times 10^8}{3.00 \times 10^6} = 300\text{ W/m}^2. Then β=10log⁡10(30010−12)=10log⁡10(3.00×1014)≈145 dB\beta = 10\log_{10}\left(\frac{300}{10^{-12}}\right) = 10\log_{10}(3.00 \times 10^{14}) \approx 145\text{ dB}.

03

A 500 Hz500\text{ Hz} sound wave travels in air (ρ=1.20 kg/m3\rho = 1.20\text{ kg/m}^3, v=340 m/sv = 340\text{ m/s}). If the air molecule displacement amplitude is smax=2.00×10−8 ms_{\text{max}} = 2.00 \times 10^{-8}\text{ m}, calculate: (a) the pressure amplitude Δpmax\Delta p_{\text{max}}, and (b) the sound intensity II.

Answer

(a) ω=2π(500)=1000π rad/s\omega = 2\pi(500) = 1000\pi\text{ rad/s}. Δpmax=ρvωsmax=(1.20)(340)(1000π)(2.00×10−8)≈2.56×10−2 Pa\Delta p_{\text{max}} = \rho v \omega s_{\text{max}} = (1.20)(340)(1000\pi)(2.00 \times 10^{-8}) \approx 2.56 \times 10^{-2}\text{ Pa}. (b) I=(Δpmax)22ρv=(2.564×10−2)22⋅1.20⋅340=6.57×10−4816≈8.06×10−7 W/m2I = \frac{(\Delta p_{\text{max}})^2}{2\rho v} = \frac{(2.564 \times 10^{-2})^2}{2 \cdot 1.20 \cdot 340} = \frac{6.57 \times 10^{-4}}{816} \approx 8.06 \times 10^{-7}\text{ W/m}^2.

Loading workspace…