Resources

An upright arrow of height ho=4.00 cmh_o = 4.00\text{ cm} is placed along the principal axis of a converging (convex) thin lens at an object distance of do=30.0 cmd_o = 30.0\text{ cm} to the left of the lens. The lens has a focal length of f=+10.0 cmf = +10.0\text{ cm}. Using thin-lens ray tracing principles and the lens equation: (a) determine the image distance did_i, (b) calculate the image height hih_i, and (c) classify the image as real or virtual, and upright or inverted.

Answer and steps

Final answer

(a) di=+15.0 cmd_i = +15.0\text{ cm} (to the right of the lens); (b) hi=−2.00 cmh_i = -2.00\text{ cm}; (c) Real and inverted.

Steps

01

Ray Tracing Principles for a Converging Lens

To understand how the image forms, we trace three standard principal rays from the tip of the upright object arrow:

  1. Parallel Ray: Travels parallel to the principal axis from the object to the lens, refracts through the lens, and passes through the focal point F2F_2 on the far side (right).
  2. Central Ray: Passes directly through the optical center of the thin lens undeflected in a straight line.
  3. Focal Ray: Passes through the front focal point F1F_1 (left) before reaching the lens, then refracts parallel to the principal axis.

Because the object distance (do=30.0 cmd_o = 30.0\text{ cm}) is greater than the focal length (f=10.0 cmf = 10.0\text{ cm}), these refracted rays converge at a single real point on the right side of the lens.


02

Determine the Image Distance (did_i)

We relate focal length ff, object distance dod_o, and image distance did_i using the thin-lens equation: 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}

Substitute the given values (f=+10.0 cmf = +10.0\text{ cm} and do=+30.0 cmd_o = +30.0\text{ cm}): 1di=1f−1do=110.0−130.0\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{10.0} - \frac{1}{30.0}

Find a common denominator: 1di=330.0−130.0=230.0=115.0 cm\frac{1}{d_i} = \frac{3}{30.0} - \frac{1}{30.0} = \frac{2}{30.0} = \frac{1}{15.0\text{ cm}}

Taking the reciprocal gives: di=+15.0 cmd_i = +15.0\text{ cm}

The positive sign indicates that the image forms 15.0 cm15.0\text{ cm} to the right of the lens (on the opposite side from the object).


03

Calculate the Image Height (hih_i)

The magnification equation relates the heights and distances: m=hiho=−didom = \frac{h_i}{h_o} = -\frac{d_i}{d_o}

Substitute the known values into the expression for magnification mm: m=−15.0 cm30.0 cm=−0.500m = -\frac{15.0\text{ cm}}{30.0\text{ cm}} = -0.500

Now solve for the image height hih_i: hi=m⋅ho=(−0.500)(4.00 cm)=−2.00 cmh_i = m \cdot h_o = (-0.500)(4.00\text{ cm}) = -2.00\text{ cm}

Pitfall Note: Remember the negative sign in the magnification formula m=−di/dom = -d_i / d_o. Omitting this sign is a common error that leads to an incorrect positive image height.


04

Classify the Image

  • Real vs. Virtual: Because di>0d_i > 0, real light rays physically intersect at the image plane to form the image on a screen. Therefore, the image is real.
  • Upright vs. Inverted: Because m<0m < 0 and hi<0h_i < 0, the arrow points downward relative to the principal axis. Therefore, the image is inverted.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student adds the reciprocals instead of subtracting when rearranging the lens equation, leading to an incorrect image distance of 7.50 cm.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1di=1f+1do  ⟹  1di=110.0+130.0=430.0  ⟹  di=30.04=7.50 cm\frac{1}{d_i} = \frac{1}{f} + \frac{1}{d_o} \implies \frac{1}{d_i} = \frac{1}{10.0} + \frac{1}{30.0} = \frac{4}{30.0} \implies d_i = \frac{30.0}{4} = 7.50\text{ cm}

    Correct

    1di=1f−1do  ⟹  1di=110.0−130.0=230.0  ⟹  di=+15.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} \implies \frac{1}{d_i} = \frac{1}{10.0} - \frac{1}{30.0} = \frac{2}{30.0} \implies d_i = +15.0\text{ cm}

    The standard thin-lens equation is 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}. Subtracting 1do\frac{1}{d_o} from both sides yields 1di=1f−1do\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o}, not 1f+1do\frac{1}{f} + \frac{1}{d_o}.

  2. Step 2

    m=−dido=−7.5030.0=−0.250  ⟹  hi=−0.250×4.00=−1.00 cmm = -\frac{d_i}{d_o} = -\frac{7.50}{30.0} = -0.250 \implies h_i = -0.250 \times 4.00 = -1.00\text{ cm}

    Correct

    m=−dido=−15.030.0=−0.500  ⟹  hi=−0.500×4.00=−2.00 cmm = -\frac{d_i}{d_o} = -\frac{15.0}{30.0} = -0.500 \implies h_i = -0.500 \times 4.00 = -2.00\text{ cm}

    Your magnification method and sign convention were correct, but the calculated height was affected by the incorrect value of did_i from step 1.

  3. Step 3

    Real and inverted\text{Real and inverted}

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and applied the magnification equation m=−didom = -\frac{d_i}{d_o}.

You correctly related the signs of did_i and mm to conclude that the image is real and inverted.

You accurately computed the common denominator and reciprocal for your written expression.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic rearrangement of the thin-lens equation

You wrote 1di=1f+1do\frac{1}{d_i} = \frac{1}{f} + \frac{1}{d_o} instead of isolating 1di\frac{1}{d_i} by subtracting 1do\frac{1}{d_o} from 1f\frac{1}{f}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the reciprocal terms when isolating a variable from the sum 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}, treating the isolated quantity as a sum rather than a difference.

REASONING PATH
Your ACEpath teacher’s suggested approach
Isolate before substituting
  • 1f=1do+1di  ⟺  1di=1f−1do\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} \iff \frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o}

  • Always write the base lens equation first, then subtract 1do\frac{1}{d_o} from both sides before plugging in numbers.

Check physical sanity with focal length
  • For an object outside the focal point of a converging lens (do>fd_o > f), did_i must satisfy 1di<1f\frac{1}{d_i} < \frac{1}{f}, which implies di>fd_i > f.

  • Verify that your calculated real image distance did_i is strictly greater than the focal length ff.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. 1di=1f−1do=110.0−130.0\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{10.0} - \frac{1}{30.0}

  2. 1di=330.0−130.0=230.0=115.0 cm  ⟹  di=+15.0 cm\frac{1}{d_i} = \frac{3}{30.0} - \frac{1}{30.0} = \frac{2}{30.0} = \frac{1}{15.0\text{ cm}} \implies d_i = +15.0\text{ cm}

  3. Substitute into magnification: m=−dido=−15.030.0=−0.500m = -\frac{d_i}{d_o} = -\frac{15.0}{30.0} = -0.500

  4. Calculate image height: hi=m⋅ho=(−0.500)(4.00 cm)=−2.00 cmh_i = m \cdot h_o = (-0.500)(4.00\text{ cm}) = -2.00\text{ cm}

Final answer

(a) di=+15.0 cmd_i = +15.0\text{ cm}; (b) hi=−2.00 cmh_i = -2.00\text{ cm}; (c) Real and inverted

NEXT STEPS
Final Takeaways from Your Teacher
  • Write down the original thin-lens formula 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} before rearranging terms.

  • Perform the subtraction step explicitly with common denominators to avoid sign errors.

  • Use the quick check di>fd_i > f whenever do>fd_o > f for a converging lens.

OverviewACEpath Teacher's Diagnosis

02 The student inverts individual terms before adding, mistakenly writing d_i = f - d_o instead of working with reciprocals.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    di=f−do  ⟹  di=10.0−30.0=−20.0 cmd_i = f - d_o \implies d_i = 10.0 - 30.0 = -20.0\text{ cm}

    Correct

    1di=1f−1do=110.0 cm−130.0 cm=230.0 cm  ⟹  di=+15.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{10.0\text{ cm}} - \frac{1}{30.0\text{ cm}} = \frac{2}{30.0\text{ cm}} \implies d_i = +15.0\text{ cm}

    You inverted each term directly instead of solving for the reciprocal 1di\frac{1}{d_i}. In the thin-lens equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}, you cannot invert individual terms because 1a+b≠1a+1b\frac{1}{a+b} \neq \frac{1}{a} + \frac{1}{b}.

  2. Step 2

    m=−dido=−−20.030.0=0.667  ⟹  hi=0.667⋅4.00=2.67 cmm = -\frac{d_i}{d_o} = -\frac{-20.0}{30.0} = 0.667 \implies h_i = 0.667 \cdot 4.00 = 2.67\text{ cm}

    Correct

    m=−dido=−15.0 cm30.0 cm=−0.500  ⟹  hi=(−0.500)(4.00 cm)=−2.00 cmm = -\frac{d_i}{d_o} = -\frac{15.0\text{ cm}}{30.0\text{ cm}} = -0.500 \implies h_i = (-0.500)(4.00\text{ cm}) = -2.00\text{ cm}

    Your application of m=−didom = -\frac{d_i}{d_o} and hi=m⋅hoh_i = m \cdot h_o was mathematically consistent with your prior result, but it produced an incorrect height due to your propagated image distance error.

  3. Step 3

    Virtual and upright\text{Virtual and upright}

    Correct

    Real and inverted\text{Real and inverted}

    Your classification matched your negative did_i and positive mm, but because the actual values are di=+15.0 cm>0d_i = +15.0\text{ cm} > 0 and m=−0.500<0m = -0.500 < 0, the image is actually real and inverted.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly remembered the magnification definition m=−dido=hihom = -\frac{d_i}{d_o} = \frac{h_i}{h_o}.

You correctly maintained the negative sign in the magnification formula when substituting negative numbers.

You correctly related the signs of image distance and magnification to the physical attributes of being virtual/real and upright/inverted.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Algebraic Reciprocal Inversion Error

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated reciprocal addition 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i} as linear addition f=do+dif = d_o + d_i, inverting individual fractions instead of finding a common denominator before taking the reciprocal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Thin-Lens Reciprocal Law
  • 1di=1f−1do=do−ffdo  ⟹  di=fdodo−f\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{d_o - f}{f d_o} \implies d_i = \frac{f d_o}{d_o - f}

  • Always isolate 1di\frac{1}{d_i} first as a fraction, compute the common denominator, and take the reciprocal as the very final step.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. 1di=110.0 cm−130.0 cm=3−130.0 cm=230.0 cm=115.0 cm\frac{1}{d_i} = \frac{1}{10.0\text{ cm}} - \frac{1}{30.0\text{ cm}} = \frac{3 - 1}{30.0\text{ cm}} = \frac{2}{30.0\text{ cm}} = \frac{1}{15.0\text{ cm}}

  2. di=+15.0 cmd_i = +15.0\text{ cm}

  3. m=−dido=−15.0 cm30.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{15.0\text{ cm}}{30.0\text{ cm}} = -0.500

  4. hi=m⋅ho=(−0.500)(4.00 cm)=−2.00 cmh_i = m \cdot h_o = (-0.500)(4.00\text{ cm}) = -2.00\text{ cm}

Final answer

(a) di=+15.0 cmd_i = +15.0\text{ cm}; (b) hi=−2.00 cmh_i = -2.00\text{ cm}; (c) Real and inverted

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out the thin-lens equation with fractions explicitly: 1di=1f−1do\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o}.

  • Find a common denominator to express 1di\frac{1}{d_i} as a single numerical fraction before inverting to find did_i.

  • Double-check your result against ray tracing: when an object is placed beyond 2f2f (30 cm>20 cm30\text{ cm} > 20\text{ cm}) of a convex lens, the image must be real, inverted, and located between ff and 2f2f.

OverviewACEpath Teacher's Diagnosis

03 The student omits the negative sign in the magnification formula, taking m = d_i/d_o, and concludes the image is upright.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    1di=1f−1do=110.0−130.0  ⟹  1di=230.0=115.0  ⟹  di=15.0 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = \frac{1}{10.0} - \frac{1}{30.0} \implies \frac{1}{d_i} = \frac{2}{30.0} = \frac{1}{15.0} \implies d_i = 15.0\text{ cm}

  2. Step 2

    m=dido=15.030.0=0.500m = \frac{d_i}{d_o} = \frac{15.0}{30.0} = 0.500

    Correct

    m=−dido=−15.0 cm30.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{15.0\text{ cm}}{30.0\text{ cm}} = -0.500

    The magnification formula for a thin lens includes an explicit minus sign: m=−didom = -\frac{d_i}{d_o}. Omitting this sign gives an erroneous positive magnification.

  3. Step 3

    hi=0.500×4.00=2.00 cmh_i = 0.500 \times 4.00 = 2.00\text{ cm}

    Correct

    hi=m⋅ho=(−0.500)(4.00 cm)=−2.00 cmh_i = m \cdot h_o = (-0.500)(4.00\text{ cm}) = -2.00\text{ cm}

    You multiplied your magnification by the object height correctly, but the result carried over the missing negative sign from Step 2.

  4. Step 4

    Real and upright\text{Real and upright}

    Correct

    Real and inverted\text{Real and inverted}

    You correctly classified the image as real because di>0d_i > 0. However, because m=−0.500<0m = -0.500 < 0, the image is inverted rather than upright.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly stated and rearranged the thin-lens equation 1f=1do+1di\frac{1}{f} = \frac{1}{d_o} + \frac{1}{d_i}.

You accurately calculated the numerical image distance di=15.0 cmd_i = 15.0\text{ cm}.

You correctly identified that a positive image distance corresponds to a real image.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign error in magnification formula

You forgot the negative sign when writing the magnification relation m=−didom = -\frac{d_i}{d_o}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the absolute magnitude ratio of distances ∣m∣=dido|m| = \frac{d_i}{d_o} with the signed magnification definition m=−didom = -\frac{d_i}{d_o}, which tracks image orientation relative to the optical axis.

REASONING PATH
Your ACEpath teacher’s suggested approach
Lens Magnification Sign Convention
  • For single thin lenses, transverse magnification is defined as m=hiho=−didom = \frac{h_i}{h_o} = -\frac{d_i}{d_o}.

  • Always write the formula with the negative sign before substituting values: m=−(dido)m = -\left(\frac{d_i}{d_o}\right).

Interpreting Image Orientation
  • A negative magnification (m<0m < 0) indicates an inverted image, while a positive magnification (m>0m > 0) indicates an upright image.

  • Check the sign of mm: since a real image formed by a converging lens has di>0d_i > 0 and do>0d_o > 0, mm must be negative and the image must be inverted.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the standard magnification definition: m=−dido=−15.0 cm30.0 cm=−0.500m = -\frac{d_i}{d_o} = -\frac{15.0\text{ cm}}{30.0\text{ cm}} = -0.500.

  2. Compute the image height: hi=m⋅ho=(−0.500)(4.00 cm)=−2.00 cmh_i = m \cdot h_o = (-0.500)(4.00\text{ cm}) = -2.00\text{ cm}.

  3. Determine image orientation: because m<0m < 0, the image is inverted.

Final answer

(a) di=+15.0 cmd_i = +15.0\text{ cm}; (b) hi=−2.00 cmh_i = -2.00\text{ cm}; (c) Real and inverted

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the definition of thin-lens magnification with its sign: m=−didom = -\frac{d_i}{d_o}.

  • Perform a ray diagram sanity check: any real image produced on the far side of a converging lens by an object beyond the focal point is always inverted.

Lock it in

Similar question

01

An object is placed 20.0 cm20.0\text{ cm} to the left of a converging lens of focal length f=+15.0 cmf = +15.0\text{ cm}. Calculate the image distance did_i.

Answer

di=+60.0 cmd_i = +60.0\text{ cm}. Key step: 1di=115.0−120.0=460.0−360.0=160.0\frac{1}{d_i} = \frac{1}{15.0} - \frac{1}{20.0} = \frac{4}{60.0} - \frac{3}{60.0} = \frac{1}{60.0}.

02

An upright object of height ho=3.00 cmh_o = 3.00\text{ cm} is placed 40.0 cm40.0\text{ cm} in front of a convex lens with f=+10.0 cmf = +10.0\text{ cm}. Determine the image distance did_i and image height hih_i.

Answer

di=+13.3 cmd_i = +13.3\text{ cm} (or 403 cm\frac{40}{3}\text{ cm}) and hi=−1.00 cmh_i = -1.00\text{ cm}. Key steps: 1di=110.0−140.0=340.0  ⟹  di=40.03 cm\frac{1}{d_i} = \frac{1}{10.0} - \frac{1}{40.0} = \frac{3}{40.0} \implies d_i = \frac{40.0}{3}\text{ cm}; m=−dido=−40/340=−13m = -\frac{d_i}{d_o} = -\frac{40/3}{40} = -\frac{1}{3}; hi=mho=−1.00 cmh_i = m h_o = -1.00\text{ cm}.

03

A converging lens forms a real image on a screen placed 24.0 cm24.0\text{ cm} behind the lens. If the focal length is 8.0 cm8.0\text{ cm}, find the object distance dod_o and state whether the image is enlarged or reduced.

Answer

do=+12.0 cmd_o = +12.0\text{ cm} and the image is enlarged (∣m∣=2.0|m| = 2.0). Key steps: 1do=1f−1di=18.0−124.0=224.0=112.0\frac{1}{d_o} = \frac{1}{f} - \frac{1}{d_i} = \frac{1}{8.0} - \frac{1}{24.0} = \frac{2}{24.0} = \frac{1}{12.0}; m=−24.012.0=−2.0m = -\frac{24.0}{12.0} = -2.0.

Loading workspace…