Resources

An optical step-index fiber consists of a cylindrical silica core with refractive index n1=1.480n_1 = 1.480 surrounded by a cladding with refractive index n2=1.440n_2 = 1.440. Calculate the critical angle θc\theta_c for total internal reflection at the core-cladding boundary, and determine the maximum acceptance angle αmax⁡\alpha_{\max} for a light ray entering the flat end face of the fiber from surrounding air (n0=1.000n_0 = 1.000).

Answer and steps

Final answer

θc=76.66∘\theta_c = 76.66^\circ (or 1.338 rad1.338\text{ rad}); αmax⁡=19.98∘\alpha_{\max} = 19.98^\circ (or 0.3487 rad0.3487\text{ rad}).

Steps

01

Calculate the Critical Angle (θc\theta_c)

Total internal reflection occurs at the core-cladding boundary when light travels from the denser core (n1n_1) toward the less dense cladding (n2n_2) at an angle of incidence greater than or equal to the critical angle θc\theta_c.

According to Snell's law at the critical condition (where the angle of refraction into the cladding is 90∘90^\circ):

sin⁡θc=n2n1\sin \theta_c = \frac{n_2}{n_1}

Substitute the given refractive indices:

sin⁡θc=1.4401.480=3637≈0.97297\sin \theta_c = \frac{1.440}{1.480} = \frac{36}{37} \approx 0.97297

Taking the inverse sine:

θc=arcsin⁡(0.97297)≈76.66∘(or 1.338 rad)\theta_c = \arcsin(0.97297) \approx 76.66^\circ \quad (\text{or } 1.338\text{ rad})


02

Relate the Boundary Angle to the Entry Face Angle

Consider a ray entering the flat end face of the fiber from air (n0=1.000n_0 = 1.000) at an incident angle α\alpha, refracting into the core at an angle θr\theta_r relative to the central fiber axis.

  1. At the flat entrance face, Snell's law gives: n0sin⁡α=n1sin⁡θrn_0 \sin \alpha = n_1 \sin \theta_r
  2. Inside the core, the normal to the flat entrance face is parallel to the fiber's central axis, while the normal to the core-cladding boundary is perpendicular to it. Therefore, the angle of incidence θi\theta_i at the core-cladding boundary satisfies: θi+θr=90∘  ⟹  θr=90∘−θi\theta_i + \theta_r = 90^\circ \implies \theta_r = 90^\circ - \theta_i

For the ray to undergo total internal reflection, we must have θi≥θc\theta_i \ge \theta_c. The maximum allowable entry angle αmax⁡\alpha_{\max} corresponds to the limiting case where θi=θc\theta_i = \theta_c:

sin⁡θr=sin⁡(90∘−θc)=cos⁡θc\sin \theta_r = \sin(90^\circ - \theta_c) = \cos \theta_c


03

Calculate the Maximum Acceptance Angle (αmax⁡\alpha_{\max})

Using the trigonometric identity cos⁡θc=1−sin⁡2θc\cos \theta_c = \sqrt{1 - \sin^2 \theta_c}:

cos⁡θc=1−(n2n1)2=n12−n22n1\cos \theta_c = \sqrt{1 - \left(\frac{n_2}{n_1}\right)^2} = \frac{\sqrt{n_1^2 - n_2^2}}{n_1}

Substitute this back into Snell's law at the entrance face:

n0sin⁡αmax⁡=n1cos⁡θc=n12−n22n_0 \sin \alpha_{\max} = n_1 \cos \theta_c = \sqrt{n_1^2 - n_2^2}

This expression n12−n22\sqrt{n_1^2 - n_2^2} is the Numerical Aperture (NA\text{NA}) of the fiber. Now calculate NA\text{NA}:

NA=(1.480)2−(1.440)2=2.1904−2.0736=0.1168≈0.34176\text{NA} = \sqrt{(1.480)^2 - (1.440)^2} = \sqrt{2.1904 - 2.0736} = \sqrt{0.1168} \approx 0.34176

With n0=1.000n_0 = 1.000:

sin⁡αmax⁡=NAn0=0.341761.000=0.34176\sin \alpha_{\max} = \frac{\text{NA}}{n_0} = \frac{0.34176}{1.000} = 0.34176

αmax⁡=arcsin⁡(0.34176)≈19.98∘(or 0.3487 rad)\alpha_{\max} = \arcsin(0.34176) \approx 19.98^\circ \quad (\text{or } 0.3487\text{ rad})

Common Pitfall: Do not confuse the angles measured with respect to the core-cladding normal (θc\theta_c) with the angle measured with respect to the fiber axis or the end-face normal (α\alpha). Total internal reflection requires a large angle with respect to the core-cladding normal (θi≥θc\theta_i \ge \theta_c), which corresponds to a small angle of entry into the fiber (α≤αmax⁡\alpha \le \alpha_{\max}).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student inverts the ratio of refractive indices in the critical angle formula and, upon obtaining an unphysical ratio greater than 1, swaps them without fixing the root concept, then uses the complementary angle directly as the acceptance angle without accounting for refraction at the entrance face.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    sin⁡(θc)=n2n1=1.4401.480≈0.9730  ⟹  θc=arcsin⁡(0.9730)≈76.65∘\sin(\theta_c) = \frac{n_2}{n_1} = \frac{1.440}{1.480} \approx 0.9730 \implies \theta_c = \arcsin(0.9730) \approx 76.65^\circ

  2. Step 2

    α\alpha{\max} = 90^∘\circ - θ\thetac   ⟹  \implies α\alpha{\max} = 90^∘\circ - 76.65^∘\circ = 13.35^∘\circ

    Correct

    n_0 \sin α\alpha_{\max} = n_1 \sin(90^∘\circ - θ\theta_c) = n_1 \cos θ\thetac = n12−n22\sqrt{n_1^2 - n_2^2}   ⟹  \implies α\alpha{\max} = \arcsin(1.4802−1.44021.000)\left(\frac{\sqrt{1.480^2 - 1.440^2}}{1.000}\right) ≈\approx 19.98^∘\circ

    The complementary angle 90∘−θc≈13.35∘90^\circ - \theta_c \approx 13.35^\circ is the maximum angle of refraction inside the core with respect to the fiber axis, not the acceptance angle in air. Light bends upon entering the core from air, so you must apply Snell's law at the entrance face: n0sin⁡αmax⁡=n1sin⁡θr=n12−n22n_0 \sin \alpha_{\max} = n_1 \sin \theta_r = \sqrt{n_1^2 - n_2^2}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the condition for total internal reflection at the core-cladding boundary.

You accurately calculated the critical angle θc\theta_c from the given refractive indices.

You recognized the geometric complementary relationship between the boundary normal and the fiber axis.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of Entrance-Face Refraction

You treated the internal refraction angle inside the core as if it were the external incidence angle in air.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing internal ray angles relative to the axis inside the core with external launch angles in the surrounding medium, omitting the refraction step governed by Snell's law at the fiber's flat end face.

REASONING PATH
Your ACEpath teacher’s suggested approach
Two-Interface Ray Tracing
  • An optical fiber problem involves two distinct interfaces: the entrance face (air to core) and the boundary wall (core to cladding).

  • Always draw and trace the ray at both interfaces: use Snell's law at the entrance face (n0sin⁡α=n1sin⁡θrn_0 \sin \alpha = n_1 \sin \theta_r), and use right-triangle geometry (θr=90∘−θi\theta_r = 90^\circ - \theta_i) to connect to the internal reflection condition.

Numerical Aperture Formula
  • The maximum acceptance angle αmax⁡\alpha_{\max} in a medium of index n0n_0 satisfies n0sin⁡αmax⁡=NA=n12−n22n_0 \sin \alpha_{\max} = \text{NA} = \sqrt{n_1^2 - n_2^2}.

  • Calculate the numerical aperture NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2} first, then divide by the medium index n0n_0 before taking the inverse sine.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the angle inside the core: θr=90∘−θc=90∘−76.66∘=13.34∘\theta_r = 90^\circ - \theta_c = 90^\circ - 76.66^\circ = 13.34^\circ.

  2. Apply Snell's law at the flat entrance face between air (n0=1.000n_0 = 1.000) and core (n1=1.480n_1 = 1.480): n0sin⁡αmax⁡=n1sin⁡θrn_0 \sin \alpha_{\max} = n_1 \sin \theta_r.

  3. Substitute the exact trigonometric identity n1sin⁡(90∘−θc)=n1cos⁡θc=n12−n22n_1 \sin(90^\circ - \theta_c) = n_1 \cos \theta_c = \sqrt{n_1^2 - n_2^2}.

  4. Compute NA=1.4802−1.4402=2.1904−2.0736=0.1168≈0.34176\text{NA} = \sqrt{1.480^2 - 1.440^2} = \sqrt{2.1904 - 2.0736} = \sqrt{0.1168} \approx 0.34176.

  5. Solve for the launch angle in air: αmax⁡=arcsin⁡(0.34176)≈19.98∘\alpha_{\max} = \arcsin(0.34176) \approx 19.98^\circ.

Final answer

θc≈76.66∘ and αmax⁡≈19.98∘\theta_c \approx 76.66^\circ \text{ and } \alpha_{\max} \approx 19.98^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice drawing ray diagrams for step-index fibers, clearly marking the entrance interface normal versus the cladding boundary normal.

  • Derive the Numerical Aperture formula NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2} from first principles using Snell's law at both interfaces.

  • Complete the targeted flashcards and practice problems below to master two-interface optical transitions.

OverviewACEpath Teacher's Diagnosis

02 The student calculates the numerical aperture formula by summing the squares under the radical instead of subtracting them, leading to an overestimation of the numerical aperture and maximum acceptance angle.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    sin⁡(θc)=n2n1=1.4401.480=0.9730  ⟹  θc=arcsin⁡(0.9730)≈76.65∘\sin(\theta_c) = \frac{n_2}{n_1} = \frac{1.440}{1.480} = 0.9730 \implies \theta_c = \arcsin(0.9730) \approx 76.65^\circ

  2. Step 2

    NA\text{NA} = n12+n22\sqrt{n_1^2 + n_2^2} = 1.4802+1.4402\sqrt{1.480^2 + 1.440^2}   ⟹  \implies NA\text{NA} = 2.1904+2.0736\sqrt{2.1904 + 2.0736} = 4.2640\sqrt{4.2640} ≈\approx 2.065

    Correct

    NA\text{NA} = n12−n22\sqrt{n_1^2 - n_2^2} = 1.4802−1.4402\sqrt{1.480^2 - 1.440^2} = 0.1168\sqrt{0.1168} ≈\approx 0.3418

    You added the squared refractive indices under the radical instead of subtracting them. Since cos⁡θc=1−sin⁡2θc=n12−n22n1\cos\theta_c = \sqrt{1 - \sin^2\theta_c} = \frac{\sqrt{n_1^2 - n_2^2}}{n_1}, the numerical aperture is NA=n1cos⁡θc=n12−n22\text{NA} = n_1 \cos\theta_c = \sqrt{n_1^2 - n_2^2}.

  3. Step 3

    \sin(α\alpha{\max}) = 2.065 > 1,  so \text{ so } α\alpha{\max} = 90^∘\circ

    Correct

    \sinα\alpha{\max} = NAn0\frac{\text{NA}}{n_0} = 0.34181.000\frac{0.3418}{1.000} = 0.3418   ⟹  \implies α\alpha{\max} = \arcsin(0.3418) ≈\approx 19.98^∘\circ

    Because your calculated NA\text{NA} was erroneously greater than 11, your sine expression exceeded 11. Using the correct NA≈0.3418\text{NA} \approx 0.3418 yields αmax⁡≈19.98∘\alpha_{\max} \approx 19.98^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified the condition for total internal reflection at the core-cladding boundary using sin⁡θc=n2n1\sin\theta_c = \frac{n_2}{n_1}.

You noticed that a sine value greater than 11 is physically restricted and attempted to reconcile it.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula sign error in numerical aperture

You accidentally wrote a plus sign instead of a minus sign under the square root when computing the numerical aperture.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the sign in the numerical aperture formula stems from not deriving it from the Pythagorean identity: cos⁡2θc=1−sin⁡2θc\cos^2\theta_c = 1 - \sin^2\theta_c. Because total internal reflection requires light to graze the boundary, the refraction angle inside the core is complementary to the critical angle (θr=90∘−θc\theta_r = 90^\circ - \theta_c), giving sin⁡θr=cos⁡θc=1−(n2/n1)2=n12−n22n1\sin\theta_r = \cos\theta_c = \sqrt{1 - (n_2/n_1)^2} = \frac{\sqrt{n_1^2 - n_2^2}}{n_1}. Multiplying by n1n_1 leaves a difference of squares under the radical, never a sum.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check the sign using physical limits
  • For a cladding with n2≤n1n_2 \le n_1, light guidance weakens as n2→n1n_2 \to n_1. In that limit, the acceptance angle must shrink to 00, requiring NA=n12−n22→0\text{NA} = \sqrt{n_1^2 - n_2^2} \to 0.

  • Always verify that your NA\text{NA} formula approaches zero when n1=n2n_1 = n_2 rather than growing larger.

Sanity check the numerical aperture value
  • For launch from air (n0=1n_0 = 1), sin⁡αmax⁡=NA\sin\alpha_{\max} = \text{NA}. A real acceptance cone requires NA≤1\text{NA} \le 1 unless total internal reflection occurs for all entry angles.

  • If your calculated NA\text{NA} exceeds 11 for standard silica fibers (n≈1.45−1.50n \approx 1.45 - 1.50), check whether you added rather than subtracted n12n_1^2 and n22n_2^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the numerical aperture: NA=n12−n22=1.4802−1.4402=2.1904−2.0736=0.1168≈0.34176\text{NA} = \sqrt{n_1^2 - n_2^2} = \sqrt{1.480^2 - 1.440^2} = \sqrt{2.1904 - 2.0736} = \sqrt{0.1168} \approx 0.34176.

  2. Apply Snell's law at the air-core entrance interface: n0sin⁡αmax⁡=NA  ⟹  1.000⋅sin⁡αmax⁡=0.34176n_0 \sin\alpha_{\max} = \text{NA} \implies 1.000 \cdot \sin\alpha_{\max} = 0.34176.

  3. Solve for the maximum acceptance angle: αmax⁡=arcsin⁡(0.34176)≈19.98∘\alpha_{\max} = \arcsin(0.34176) \approx 19.98^\circ.

Final answer

θc≈76.66∘\theta_c \approx 76.66^\circ, αmax⁡≈19.98∘\alpha_{\max} \approx 19.98^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-derive NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2} step by step starting from θr=90∘−θc\theta_r = 90^\circ - \theta_c and Snell's law at the front face.

  • Practice calculating acceptance angles for varying index differences to build intuition for the subtraction under the radical.

OverviewACEpath Teacher's Diagnosis

03 The student uses the core refractive index n₁ as a multiplier on the acceptance angle sine rather than the surrounding medium n₀, effectively calculating arcsin(NA / n₁).

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    sin⁡(θc)=n2n1=1.4401.480≈0.9730  ⟹  θc=arcsin⁡(0.9730)≈76.65∘\sin(\theta_c) = \frac{n_2}{n_1} = \frac{1.440}{1.480} \approx 0.9730 \implies \theta_c = \arcsin(0.9730) \approx 76.65^\circ

  2. Step 2

    NA=n12−n22=1.4802−1.4402≈0.3418\text{NA} = \sqrt{n_1^2 - n_2^2} = \sqrt{1.480^2 - 1.440^2} \approx 0.3418

  3. Step 3

    n1sin⁡(αmax⁡)=NA  ⟹  sin⁡(αmax⁡)=0.34181.480≈0.2309n_1 \sin(\alpha_{\max}) = \text{NA} \implies \sin(\alpha_{\max}) = \frac{0.3418}{1.480} \approx 0.2309

    Correct

    n0sin⁡αmax⁡=NA  ⟹  sin⁡αmax⁡=0.34181.000=0.3418n_0 \sin\alpha_{\max} = \text{NA} \implies \sin\alpha_{\max} = \frac{0.3418}{1.000} = 0.3418

    The light ray enters the fiber from the surrounding medium (air, n0=1.000n_0 = 1.000), so Snell's law at the entrance face is n0sin⁡αmax⁡=n1sin⁡θr=NAn_0 \sin\alpha_{\max} = n_1 \sin\theta_r = \text{NA}. You used n1n_1 instead of n0n_0, which actually solved for sin⁡θr\sin\theta_r inside the core rather than sin⁡αmax⁡\sin\alpha_{\max} in air.

  4. Step 4

    αmax⁡=arcsin⁡(0.2309)≈13.35∘\alpha_{\max} = \arcsin(0.2309) \approx 13.35^\circ

    Correct

    αmax⁡=arcsin⁡(0.3418)≈19.98∘\alpha_{\max} = \arcsin(0.3418) \approx 19.98^\circ

    Because of the incorrect index used in the entrance boundary equation, your final angle evaluated to 13.35∘13.35^\circ instead of 19.98∘19.98^\circ.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified and applied the critical angle formula sin⁡θc=n2n1\sin\theta_c = \frac{n_2}{n_1}.

You correctly calculated the numerical aperture using NA=n12−n22\text{NA} = \sqrt{n_1^2 - n_2^2}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Boundary medium confusion in Snell's law

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You matched the incident angle αmax⁡\alpha_{\max} with the core's refractive index n1n_1 rather than the external medium's refractive index n0n_0. At the entrance interface, Snell's law states noutsidesin⁡(θoutside)=ninsidesin⁡(θinside)n_{\text{outside}} \sin(\theta_{\text{outside}}) = n_{\text{inside}} \sin(\theta_{\text{inside}}). Since the light approaches from air, the factor multiplying sin⁡αmax⁡\sin\alpha_{\max} must be n0=1.000n_0 = 1.000.

REASONING PATH
Your ACEpath teacher’s suggested approach
Snell's Law at the Entrance Face
  • n0sin⁡α=n1sin⁡θrn_0 \sin\alpha = n_1 \sin\theta_r

  • Always pair each angle with the refractive index of the specific medium in which that angle is measured.

Definition of Numerical Aperture
  • NA=n0sin⁡αmax⁡=n12−n22\text{NA} = n_0 \sin\alpha_{\max} = \sqrt{n_1^2 - n_2^2}

  • Set NA\text{NA} equal to n0sin⁡αmax⁡n_0 \sin\alpha_{\max}, where n0n_0 is the refractive index of the medium surrounding the fiber face.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Snell's law at the flat entrance face: n0sin⁡αmax⁡=NAn_0 \sin\alpha_{\max} = \text{NA}.

  2. Substitute n0=1.000n_0 = 1.000 and NA≈0.3418\text{NA} \approx 0.3418: sin⁡αmax⁡=0.34181.000=0.3418\sin\alpha_{\max} = \frac{0.3418}{1.000} = 0.3418.

  3. Compute the inverse sine: αmax⁡=arcsin⁡(0.3418)≈19.98∘\alpha_{\max} = \arcsin(0.3418) \approx 19.98^\circ.

Final answer

θc≈76.66∘,αmax⁡≈19.98∘\theta_c \approx 76.66^\circ, \quad \alpha_{\max} \approx 19.98^\circ

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the derivation of NA=n0sin⁡αmax⁡\text{NA} = n_0 \sin\alpha_{\max} from Snell's law at the front face.

  • Practice labeling which medium each ray angle resides in before writing Snell's law.

Lock it in

Similar question

01

A step-index fiber has a core of index n1=1.50n_1 = 1.50 and a cladding of index n2=1.45n_2 = 1.45. Calculate its numerical aperture (NA) and the maximum acceptance angle αmax⁡\alpha_{\max} for light entering from air (n0=1.00n_0 = 1.00).

Answer

NA=1.502−1.452=2.25−2.1025=0.1475≈0.3841\text{NA} = \sqrt{1.50^2 - 1.45^2} = \sqrt{2.25 - 2.1025} = \sqrt{0.1475} \approx 0.3841. Therefore, αmax⁡=arcsin⁡(0.3841)≈22.59∘\alpha_{\max} = \arcsin(0.3841) \approx 22.59^\circ.

02

The same fiber (n1=1.50n_1 = 1.50, n2=1.45n_2 = 1.45) is submerged in water (n0=1.33n_0 = 1.33). Determine the new maximum acceptance angle αmax⁡,water\alpha_{\max,\text{water}} for light entering the end face from water.

Answer

The numerical aperture depends only on the fiber: NA=n12−n22≈0.3841\text{NA} = \sqrt{n_1^2 - n_2^2} \approx 0.3841. Using n0sin⁡αmax⁡=NAn_0 \sin \alpha_{\max} = \text{NA} with n0=1.33n_0 = 1.33: sin⁡αmax⁡=0.38411.33≈0.2888  ⟹  αmax⁡=arcsin⁡(0.2888)≈16.78∘\sin \alpha_{\max} = \frac{0.3841}{1.33} \approx 0.2888 \implies \alpha_{\max} = \arcsin(0.2888) \approx 16.78^\circ.

03

An optical fiber must have a critical angle of θc=80.0∘\theta_c = 80.0^\circ at the core-cladding boundary and an acceptance angle in air of αmax⁡=15.0∘\alpha_{\max} = 15.0^\circ. Determine the required refractive indices n1n_1 of the core and n2n_2 of the cladding.

Answer

From the acceptance angle in air, NA=sin⁡(15.0∘)≈0.25882\text{NA} = \sin(15.0^\circ) \approx 0.25882. From geometry, NA=n1cos⁡θc\text{NA} = n_1 \cos \theta_c, so n1=NAcos⁡(80.0∘)=0.25882cos⁡(80.0∘)≈1.491n_1 = \frac{\text{NA}}{\cos(80.0^\circ)} = \frac{0.25882}{\cos(80.0^\circ)} \approx 1.491. Then using sin⁡θc=n2n1\sin \theta_c = \frac{n_2}{n_1}, we find n2=n1sin⁡(80.0∘)=1.491×0.9848≈1.468n_2 = n_1 \sin(80.0^\circ) = 1.491 \times 0.9848 \approx 1.468.

Loading workspace…