Resources

A vertical object is placed 25.0 cm25.0\text{ cm} in front of a diverging (concave) spherical mirror with a radius of curvature of magnitude ∣R∣=30.0 cm|R| = 30.0\text{ cm}. In Cartesian sign conventions, centers of curvature and focal points behind the reflective surface carry negative signs. (a) State the signed focal length ff of this diverging mirror. (b) Trace the principal rays (a parallel ray reflecting as if radiating from the focal point and a ray aimed at the vertex reflecting symmetrically) to compute the signed image distance did_i. (c) Determine the signed lateral magnification mm, confirming whether the image is upright or inverted and real or virtual.

Answer and steps

Final answer

(a) f=−15.0 cmf = -15.0\text{ cm}; (b) di=−9.38 cmd_i = -9.38\text{ cm} (located 9.38 cm9.38\text{ cm} behind the mirror surface); (c) m=+0.375m = +0.375 (upright and virtual).

Steps

Part (a): Determine the Signed Focal Length

For any spherical mirror with radius of curvature of magnitude ∣R∣|R|, the focal length is half the radius:

∣f∣=∣R∣2=30.0 cm2=15.0 cm|f| = \frac{|R|}{2} = \frac{30.0\text{ cm}}{2} = 15.0\text{ cm}

Under the standard Cartesian sign convention, positions behind the reflecting surface (where the center of curvature and focal point lie for a diverging mirror) are assigned negative values. Therefore:

f=−15.0 cmf = -15.0\text{ cm}


Part (b): Determine the Signed Image Distance Using the Mirror Equation

A ray diagram traces two standard principal rays from the top of an upright object located at do=+25.0 cmd_o = +25.0\text{ cm}:

  1. Parallel Ray: Travels parallel to the principal axis toward the mirror, reflecting away such that its backward extension traces back to the focal point FF behind the mirror.
  2. Vertex Ray: Strikes the mirror vertex at an angle of incidence θ\theta to the principal axis and reflects symmetrically downward at the same angle θ\theta. Its backward extension continues behind the mirror.

The virtual image is formed at the intersection of these backward-extended rays behind the mirror.

Using the spherical mirror formula:

1do+1di=1f\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f}

Substitute the known values do=25.0 cmd_o = 25.0\text{ cm} and f=−15.0 cmf = -15.0\text{ cm}:

125.0+1di=−115.0\frac{1}{25.0} + \frac{1}{d_i} = -\frac{1}{15.0}

Isolate 1di\frac{1}{d_i} using a common denominator of 7575:

1di=−115.0−125.0=−575.0−375.0=−875.0 cm−1\frac{1}{d_i} = -\frac{1}{15.0} - \frac{1}{25.0} = -\frac{5}{75.0} - \frac{3}{75.0} = -\frac{8}{75.0}\text{ cm}^{-1}

Inverting gives the signed image distance:

di=−75.08 cm≈−9.38 cmd_i = -\frac{75.0}{8}\text{ cm} \approx -9.38\text{ cm}

The negative sign confirms that the image is formed 9.38 cm9.38\text{ cm} behind the mirror surface.


Part (c): Determine the Lateral Magnification and Image Characteristics

The lateral magnification mm relates the image and object distances:

m=−didom = -\frac{d_i}{d_o}

Substitute di=−9.375 cmd_i = -9.375\text{ cm} and do=25.0 cmd_o = 25.0\text{ cm}:

m=−−9.375 cm25.0 cm=+75/825=+38=+0.375m = -\frac{-9.375\text{ cm}}{25.0\text{ cm}} = +\frac{75 / 8}{25} = +\frac{3}{8} = +0.375

  • Orientation: Because m>0m > 0, the image is upright.
  • Nature: Because light rays do not actually converge at the image location behind the mirror (and di<0d_i < 0), the image is virtual (and reduced in size since ∣m∣<1|m| < 1).

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student treats the diverging mirror as having a positive focal length of +15.0 cm, resulting in an incorrect positive image distance and an inverted real image.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=∣R∣2=30.0 cm2=+15.0 cmf = \frac{|R|}{2} = \frac{30.0\text{ cm}}{2} = +15.0\text{ cm}

    Correct

    f=−∣R∣2=−15.0 cmf = -\frac{|R|}{2} = -15.0\text{ cm}

    A diverging mirror has its focal point behind the reflective surface, which means its focal length must carry a negative sign (f=−15.0 cmf = -15.0\text{ cm}) under standard Cartesian sign conventions.

  2. Step 2

    1do+1di=1f  ⟹  1di=115.0−125.0=275.0  ⟹  di=+37.5 cm\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f} \implies \frac{1}{d_i} = \frac{1}{15.0} - \frac{1}{25.0} = \frac{2}{75.0} \implies d_i = +37.5\text{ cm}

    Correct

    125.0+1di=−115.0  ⟹  1di=−875.0  ⟹  di=−9.38 cm\frac{1}{25.0} + \frac{1}{d_i} = -\frac{1}{15.0} \implies \frac{1}{d_i} = -\frac{8}{75.0} \implies d_i = -9.38\text{ cm}

    Your algebra and use of the mirror equation were mathematically consistent with your focal length value, but the calculation was affected by using f=+15.0 cmf = +15.0\text{ cm} rather than −15.0 cm-15.0\text{ cm}.

  3. Step 3

    m=−dido=−37.525.0=−1.5  ⟹  The image is inverted and real.m = -\frac{d_i}{d_o} = -\frac{37.5}{25.0} = -1.5 \implies \text{The image is inverted and real.}

    Correct

    m=−−9.37525.0=+0.375  ⟹  The image is upright and virtual.m = -\frac{-9.375}{25.0} = +0.375 \implies \text{The image is upright and virtual.}

    Your magnification formula and conclusions followed directly from your positive image distance, but using the correct di=−9.38 cmd_i = -9.38\text{ cm} gives m=+0.375m = +0.375, indicating a virtual, upright, and reduced image.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the relationship ∣f∣=∣R∣2|f| = \frac{|R|}{2} to find the magnitude of the focal length.

You correctly set up and solved the spherical mirror equation 1do+1di=1f\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f}.

You applied the lateral magnification formula m=−didom = -\frac{d_i}{d_o} and correctly interpreted the signs of your resulting values.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error for diverging optical elements

You treated the diverging mirror as having a positive focal length (f=+15.0 cmf = +15.0\text{ cm}).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating converging and diverging sign conventions: diverging mirrors always have a negative focal length (f<0f < 0) because their focal point lies behind the reflective surface.

REASONING PATH
Your ACEpath teacher’s suggested approach
Optical Element Sign Convention
  • Converging elements (concave mirrors, convex lenses) have f>0f > 0; diverging elements (convex mirrors, concave lenses) have f<0f < 0.

  • Always identify whether the mirror converges or diverges light before writing down the sign of ff.

Nature of Diverging Mirror Images
  • A single diverging mirror can only form upright, virtual, and diminished images (di<0d_i < 0, 0<m<10 < m < 1) for real objects.

  • If you calculate a real or inverted image for a diverging mirror, immediately check the sign of ff and did_i.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set f=−15.0 cmf = -15.0\text{ cm} for the diverging mirror.

  2. Substitute do=+25.0 cmd_o = +25.0\text{ cm} and f=−15.0 cmf = -15.0\text{ cm} into 1di=1f−1do=−115.0−125.0=−875.0 cm−1\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = -\frac{1}{15.0} - \frac{1}{25.0} = -\frac{8}{75.0}\text{ cm}^{-1}.

  3. Invert to find di=−75.08 cm=−9.38 cmd_i = -\frac{75.0}{8}\text{ cm} = -9.38\text{ cm}.

  4. Calculate magnification m=−dido=−−9.375 cm25.0 cm=+0.375m = -\frac{d_i}{d_o} = -\frac{-9.375\text{ cm}}{25.0\text{ cm}} = +0.375.

Final answer

(a) f=−15.0 cmf = -15.0\text{ cm}; (b) di=−9.38 cmd_i = -9.38\text{ cm}; (c) m=+0.375m = +0.375 (upright and virtual)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the Cartesian sign convention table for spherical mirrors, paying special attention to focal points located behind the mirror surface.

  • Practice drawing ray diagrams for diverging mirrors to visually reinforce why rays diverge and only intersect behind the mirror as virtual images.

OverviewACEpath Teacher's Diagnosis

02 The student forgets the negative sign in the lateral magnification formula m = -d_i/d_o, calculating m = d_i/d_o = -0.375 and incorrectly concluding the image is inverted.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    f=−∣R∣2=−30.0 cm2=−15.0 cmf = \frac{-|R|}{2} = \frac{-30.0\text{ cm}}{2} = -15.0\text{ cm}

  2. Step 2

    1do+1di=1f  ⟹  1di=1(−15.0)−125.0=−875.0  ⟹  di=−9.375 cm\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f} \implies \frac{1}{d_i} = \frac{1}{(-15.0)} - \frac{1}{25.0} = \frac{-8}{75.0} \implies d_i = -9.375\text{ cm}

  3. Step 3

    m=dido=−9.37525.0=−0.375m = \frac{d_i}{d_o} = \frac{-9.375}{25.0} = -0.375

    Correct

    m=−dido=−−9.375 cm25.0 cm=+0.375m = -\frac{d_i}{d_o} = -\frac{-9.375\text{ cm}}{25.0\text{ cm}} = +0.375

    The standard magnification formula for mirrors includes an explicit negative sign: m=−didom = -\frac{d_i}{d_o}. Omitting this sign caused mm to be negative instead of positive.

  4. Step 4

    The image is inverted and virtual.\text{The image is inverted and virtual.}

    Correct

    The image is upright and virtual.\text{The image is upright and virtual.}

    Because your computed magnification was negative, you concluded the image was inverted. With the correct value m=+0.375>0m = +0.375 > 0, the image is upright.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly assigned a negative sign to the focal length of a diverging mirror.

You accurately manipulated the mirror equation with fractions to calculate di=−9.375 cmd_i = -9.375\text{ cm}.

You correctly identified that a negative image distance corresponds to a virtual image.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign Error in Mirror Magnification Formula

Omitting the intrinsic minus sign in the mirror magnification equation m=−didom = -\frac{d_i}{d_o}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the mirror magnification formula m=−didom = -\frac{d_i}{d_o} with the thin lens magnification formula m=didom = \frac{d_i}{d_o} (or forgetting that reflection reverses the ray propagation direction relative to the principal axis).

REASONING PATH
Your ACEpath teacher’s suggested approach
Mirror vs. Lens Magnification
  • For all spherical mirrors, m=−didom = -\frac{d_i}{d_o}; for thin lenses, m=+didom = +\frac{d_i}{d_o}.

  • Always write the definition m=−didom = -\frac{d_i}{d_o} before substituting signed values of did_i and dod_o for a mirror problem.

Orientation Sign Check
  • m>0m > 0 means upright; m<0m < 0 means inverted.

  • Check that a virtual image formed behind a diverging mirror is always upright (m>0m > 0 and ∣m∣<1|m| < 1).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. m=−didom = -\frac{d_i}{d_o}

  2. m=−(−9.375 cm25.0 cm)=+0.375m = -\left(\frac{-9.375\text{ cm}}{25.0\text{ cm}}\right) = +0.375

  3. Since m>0m > 0, the image is upright; since di<0d_i < 0, the image is virtual.

Final answer

(a) f=−15.0 cmf = -15.0\text{ cm}; (b) di=−9.38 cmd_i = -9.38\text{ cm}; (c) m=+0.375m = +0.375 (upright and virtual)

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the distinction: mirrors have a minus sign in m=−di/dom = -d_i / d_o, whereas thin lenses do not.

  • Use a quick ray diagram or common sense check: diverging mirrors always produce upright, virtual, reduced images for real objects.

OverviewACEpath Teacher's Diagnosis

03 The student confuses the focal length with the full radius of curvature by taking f = R = -30.0 cm rather than dividing by 2.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    f=−∣R∣=−30.0 cmf = -|R| = -30.0\text{ cm}

    Correct

    f=−∣R∣2=−30.0 cm2=−15.0 cmf = -\frac{|R|}{2} = -\frac{30.0\text{ cm}}{2} = -15.0\text{ cm}

    You correctly assigned a negative sign for the diverging mirror, but the focal length of a spherical mirror is half of its radius of curvature (f=R2f = \frac{R}{2}).

  2. Step 2

    1do+1di=1f  ⟹  1di=1−30.0−125.0=−5150−6150=−11150  ⟹  di=−13.64 cm\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f} \implies \frac{1}{d_i} = \frac{1}{-30.0} - \frac{1}{25.0} = -\frac{5}{150} - \frac{6}{150} = -\frac{11}{150} \implies d_i = -13.64\text{ cm}

    Correct

    1di=1f−1do=−115.0−125.0=−875.0 cm−1  ⟹  di=−9.38 cm\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = -\frac{1}{15.0} - \frac{1}{25.0} = -\frac{8}{75.0}\text{ cm}^{-1} \implies d_i = -9.38\text{ cm}

    Your algebraic manipulation and fraction arithmetic were executed correctly, but substituting the incorrect focal length f=−30.0 cmf = -30.0\text{ cm} carried the error into your image distance.

  3. Step 3

    m=−dido=−−13.6425.0=+0.546  ⟹  The image is upright and virtual.m = -\frac{d_i}{d_o} = -\frac{-13.64}{25.0} = +0.546 \implies \text{The image is upright and virtual.}

    Correct

    m=−dido=−−9.37525.0=+0.375m = -\frac{d_i}{d_o} = -\frac{-9.375}{25.0} = +0.375; the image is upright and virtual.

    You used the correct magnification formula and accurately reasoned that m>0m > 0 indicates an upright image and di<0d_i < 0 indicates a virtual image, though the numerical value was affected by the earlier calculation.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the mirror equation 1do+1di=1f\frac{1}{d_o} + \frac{1}{d_i} = \frac{1}{f} and isolated 1di\frac{1}{d_i} accurately.

You found a valid common denominator and inverted the fraction without algebraic slips.

You correctly identified that a positive magnification corresponds to an upright image and a negative image distance corresponds to a virtual image.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Focal length equals radius confusion

You equated the focal length to the full radius of curvature (f=Rf = R) rather than dividing by 22.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the location of the center of curvature CC with the focal point FF of a spherical mirror.

REASONING PATH
Your ACEpath teacher’s suggested approach
Focal Length vs. Radius
  • For all spherical mirrors in paraxial optics, f=R2f = \frac{R}{2}.

  • Always divide the given radius of curvature by 22 before assigning the appropriate sign for the mirror type.

Sign Conventions for Mirrors
  • Converging (concave) mirrors have f>0f > 0; diverging (convex) mirrors have f<0f < 0.

  • Verify that your focal length sign reflects whether parallel rays converge toward a real point (++) or diverge away from a virtual point (−-) behind the mirror.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Compute the correct focal length: f=−∣R∣2=−30.0 cm2=−15.0 cmf = -\frac{|R|}{2} = -\frac{30.0\text{ cm}}{2} = -15.0\text{ cm}.

  2. Substitute f=−15.0 cmf = -15.0\text{ cm} and do=25.0 cmd_o = 25.0\text{ cm} into the mirror formula: 1di=−115.0−125.0=−875.0 cm−1\frac{1}{d_i} = -\frac{1}{15.0} - \frac{1}{25.0} = -\frac{8}{75.0}\text{ cm}^{-1}.

  3. Invert to solve for did_i: di=−75.08 cm=−9.375 cm≈−9.38 cmd_i = -\frac{75.0}{8}\text{ cm} = -9.375\text{ cm} \approx -9.38\text{ cm}.

  4. Compute the lateral magnification: m=−dido=−−9.375 cm25.0 cm=+0.375m = -\frac{d_i}{d_o} = -\frac{-9.375\text{ cm}}{25.0\text{ cm}} = +0.375.

Final answer

(a) f=−15.0 cmf = -15.0\text{ cm}; (b) di=−9.38 cmd_i = -9.38\text{ cm}; (c) m=+0.375m = +0.375 (upright and virtual)

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the geometric relationship between the vertex, focal point, and center of curvature on a spherical mirror axis.

  • Write down the formula f=R2f = \frac{R}{2} as your explicit first line before substituting numerical values into optics problems.

Lock it in

Similar question

01

An object is placed 20.0 cm20.0\text{ cm} in front of a diverging spherical mirror with a focal length of magnitude ∣f∣=10.0 cm|f| = 10.0\text{ cm}. Find the signed image distance did_i.

Answer

di=−6.67 cmd_i = -6.67\text{ cm}. Use f=−10.0 cmf = -10.0\text{ cm} and do=+20.0 cmd_o = +20.0\text{ cm} in 1di=1f−1do=−110.0−120.0=−320.0 cm−1\frac{1}{d_i} = \frac{1}{f} - \frac{1}{d_o} = -\frac{1}{10.0} - \frac{1}{20.0} = -\frac{3}{20.0}\text{ cm}^{-1}, giving di=−20.03 cm≈−6.67 cmd_i = -\frac{20.0}{3}\text{ cm} \approx -6.67\text{ cm}.

02

A small toy of height 4.0 cm4.0\text{ cm} is placed 30.0 cm30.0\text{ cm} from a convex (diverging) mirror with radius of curvature magnitude ∣R∣=30.0 cm|R| = 30.0\text{ cm}. Determine the image distance did_i and the image height hih_i.

Answer

di=−10.0 cmd_i = -10.0\text{ cm} and hi=+1.33 cmh_i = +1.33\text{ cm}. First, f=−∣R∣/2=−15.0 cmf = -|R|/2 = -15.0\text{ cm}. Then 1di=−115.0−130.0=−330.0=−110.0 cm−1  ⟹  di=−10.0 cm\frac{1}{d_i} = -\frac{1}{15.0} - \frac{1}{30.0} = -\frac{3}{30.0} = -\frac{1}{10.0}\text{ cm}^{-1} \implies d_i = -10.0\text{ cm}. Magnification is m=−−10.030.0=+13m = -\frac{-10.0}{30.0} = +\frac{1}{3}, so hi=mho=13(4.0 cm)≈+1.33 cmh_i = m h_o = \frac{1}{3}(4.0\text{ cm}) \approx +1.33\text{ cm} (upright and virtual).

03

A security mirror has a focal length of −0.50 m-0.50\text{ m}. Where must a customer stand along the principal axis so that their virtual image appears with a lateral magnification of +0.20+0.20?

Answer

do=+2.0 md_o = +2.0\text{ m}. Using m=−dido=+0.20m = -\frac{d_i}{d_o} = +0.20, we have di=−0.20dod_i = -0.20 d_o. Substitute into the mirror formula: 1do+1−0.20do=1f  ⟹  1do−5do=−4do=1−0.50\frac{1}{d_o} + \frac{1}{-0.20 d_o} = \frac{1}{f} \implies \frac{1}{d_o} - \frac{5}{d_o} = -\frac{4}{d_o} = \frac{1}{-0.50}. Solving yields do=(−4)(−0.50)=+2.0 md_o = (-4)(-0.50) = +2.0\text{ m}.

Loading workspace…