Resources

A thermodynamic heat engine operates with a thermal efficiency of η=32.0%\eta = 32.0\%. During a single operational cycle, the engine produces 480 J480\text{ J} of useful mechanical work. Determine the ratio of the heat expelled to the cold reservoir (QCQ_C) to the work output (WW), expressed as QCW\frac{Q_C}{W}.

Answer and steps

Final answer

QCW=2.13\frac{Q_C}{W} = 2.13

Steps

Method 1: Direct Relationship from the Definition of Thermal Efficiency

  1. Relate thermal efficiency to work and heat: The thermal efficiency η\eta of any heat engine is the ratio of useful work output (WW) to the total heat absorbed from the hot reservoir (QHQ_H): η=WQH\eta = \frac{W}{Q_H}
  2. Apply energy conservation for a complete cycle: Over a complete operational cycle, the internal energy change of the working substance is zero (ΔU=0\Delta U = 0). By the first law of thermodynamics: W=QH−QCW = Q_H - Q_C where QCQ_C is the heat expelled to the cold reservoir.
  3. Express QCQ_C in terms of WW and η\eta: Rearrange the work equation to solve for QCQ_C: QC=QH−WQ_C = Q_H - W From the efficiency formula, QH=WηQ_H = \frac{W}{\eta}. Substituting this in gives: QC=Wη−W=W(1η−1)=W(1−ηη)Q_C = \frac{W}{\eta} - W = W \left(\frac{1}{\eta} - 1\right) = W \left(\frac{1 - \eta}{\eta}\right)
  4. Compute the ratio QCW\frac{Q_C}{W}: Divide both sides by WW: QCW=1−ηη\frac{Q_C}{W} = \frac{1 - \eta}{\eta} Given η=32.0%=0.320\eta = 32.0\% = 0.320: QCW=1−0.3200.320=0.6800.320=2.125≈2.13\frac{Q_C}{W} = \frac{1 - 0.320}{0.320} = \frac{0.680}{0.320} = 2.125 \approx 2.13

Method 2: Calculating Numerical Values of Heat Quantities

  1. Find the total heat absorbed (QHQ_H): QH=Wη=480 J0.320=1500 JQ_H = \frac{W}{\eta} = \frac{480\text{ J}}{0.320} = 1500\text{ J}
  2. Find the heat expelled (QCQ_C): QC=QH−W=1500 J−480 J=1020 JQ_C = Q_H - W = 1500\text{ J} - 480\text{ J} = 1020\text{ J}
  3. Calculate the ratio: QCW=1020 J480 J=2.125≈2.13\frac{Q_C}{W} = \frac{1020\text{ J}}{480\text{ J}} = 2.125 \approx 2.13

Pitfall to avoid: The value of work (480 J480\text{ J}) is not strictly required to find the ratio QCW\frac{Q_C}{W}, as it cancels out algebraically. However, calculating explicit values of QHQ_H and QCQ_C serves as a helpful check on your work.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student confuses the rejected heat with the heat absorbed from the hot reservoir, calculating Q_H / W = 1 / η instead of Q_C / W.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    η=WQH=0.320  ⟹  QH=4800.320=1500 J\eta = \frac{W}{Q_H} = 0.320 \implies Q_H = \frac{480}{0.320} = 1500\text{ J}

  2. Step 2

    QCW=1500480=3.125\frac{Q_C}{W} = \frac{1500}{480} = 3.125

    Correct

    QC=QH−W=1500 J−480 J=1020 J  ⟹  QCW=1020 J480 J≈2.13Q_C = Q_H - W = 1500\text{ J} - 480\text{ J} = 1020\text{ J} \implies \frac{Q_C}{W} = \frac{1020\text{ J}}{480\text{ J}} \approx 2.13

    You placed QH=1500 JQ_H = 1500\text{ J} in the numerator instead of QCQ_C. By energy conservation, the heat discharged to the cold reservoir is QC=QH−W=1020 JQ_C = Q_H - W = 1020\text{ J}, giving QCW=1020480≈2.13\frac{Q_C}{W} = \frac{1020}{480} \approx 2.13.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that thermal efficiency is the ratio of work output to heat absorbed, η=WQH\eta = \frac{W}{Q_H}.

You accurately computed the total heat input from the hot reservoir as QH=1500 JQ_H = 1500\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Confused absorbed heat with expelled heat

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You equated or confused the absorbed heat (QHQ_H) with the expelled heat (QCQ_C), calculating QHW=1η\frac{Q_H}{W} = \frac{1}{\eta} instead of first applying the first law of thermodynamics (QC=QH−WQ_C = Q_H - W) to find QCQ_C.

REASONING PATH
Your ACEpath teacher’s suggested approach
First Law of Thermodynamics for an Engine Cycle
  • For a cyclic heat engine, energy conservation requires QH=W+QCQ_H = W + Q_C, which means QC=QH−WQ_C = Q_H - W.

  • Always distinguish between heat input (QHQ_H) from the hot source and heat output (QCQ_C) discharged to the cold sink before forming energy ratios.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the first law of thermodynamics to find QCQ_C: QC=QH−W=1500 J−480 J=1020 JQ_C = Q_H - W = 1500\text{ J} - 480\text{ J} = 1020\text{ J}.

  2. Compute the required ratio: QCW=1020 J480 J=2.125\frac{Q_C}{W} = \frac{1020\text{ J}}{480\text{ J}} = 2.125.

  3. Round to three significant figures: QCW≈2.13\frac{Q_C}{W} \approx 2.13.

Final answer

QCW=2.13\frac{Q_C}{W} = 2.13

NEXT STEPS
Final Takeaways from Your Teacher
  • Before setting up a ratio, write down the energy balance equation W=QH−QCW = Q_H - Q_C to explicitly define QCQ_C.

  • Remember that algebraically, QCW=QH−WW=1η−1=1−ηη\frac{Q_C}{W} = \frac{Q_H - W}{W} = \frac{1}{\eta} - 1 = \frac{1 - \eta}{\eta}, which does not require finding QHQ_H or WW explicitly.

OverviewACEpath Teacher's Diagnosis

02 A student confuses the formula for efficiency by incorrectly writing η = Q_C / Q_H instead of W / Q_H, leading to an incorrect ratio of 0.471.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    a) η=QCQH=0.320\eta = \frac{Q_C}{Q_H} = 0.320

    Correct

    η=WQH=1−QCQH=0.320\eta = \frac{W}{Q_H} = 1 - \frac{Q_C}{Q_H} = 0.320

    Thermal efficiency η\eta is the ratio of useful work output to heat absorbed, WQH\frac{W}{Q_H}, not the fraction of heat expelled to the cold reservoir QCQH\frac{Q_C}{Q_H}.

  2. Step 2

    b) W=QH−QC=QC0.320−QC=2.125QCW = Q_H - Q_C = \frac{Q_C}{0.320} - Q_C = 2.125 Q_C

    Correct

    QC=QH−W=W0.320−W=2.125WQ_C = Q_H - W = \frac{W}{0.320} - W = 2.125 W

    Your algebraic rearrangement and calculation of 10.320−1=2.125\frac{1}{0.320} - 1 = 2.125 were mathematically correct, but this step inherits the incorrect relation QH=QC0.320Q_H = \frac{Q_C}{0.320} from Step 1.

  3. Step 3

    c) QCW=12.125=0.471\frac{Q_C}{W} = \frac{1}{2.125} = 0.471

    Correct

    QCW=2.125≈2.13\frac{Q_C}{W} = 2.125 \approx 2.13

    Because line (b) expressed WW in terms of QCQ_C using the faulty formula, solving for QCW\frac{Q_C}{W} gave the reciprocal of the correct value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that for a cyclic heat engine, energy conservation gives W=QH−QCW = Q_H - Q_C.

You executed clean algebraic manipulations and computed the reciprocal accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Definition Error

You set η=QCQH\eta = \frac{Q_C}{Q_H} instead of η=WQH\eta = \frac{W}{Q_H}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the useful work output (WW) with the discarded waste heat (QCQ_C) in the numerator of the thermal efficiency definition. Efficiency always measures what you gain (WW) relative to what you pay (QHQ_H).

REASONING PATH
Your ACEpath teacher’s suggested approach
Thermal Efficiency Definition
  • η=benefitcost=WQH=1−QCQH\eta = \frac{\text{benefit}}{\text{cost}} = \frac{W}{Q_H} = 1 - \frac{Q_C}{Q_H}

  • Always verify that the numerator represents the desired work output WW, while the denominator represents the total input heat QHQ_H.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Use the definition of thermal efficiency: η=WQH=0.320\eta = \frac{W}{Q_H} = 0.320, which implies QH=WηQ_H = \frac{W}{\eta}.

  2. Relate the heat expelled to work using conservation of energy: QC=QH−W=Wη−W=W(1η−1)=W(1−ηη)Q_C = Q_H - W = \frac{W}{\eta} - W = W\left(\frac{1}{\eta} - 1\right) = W\left(\frac{1 - \eta}{\eta}\right).

  3. Divide by WW to find the ratio: QCW=1−0.3200.320=0.6800.320=2.125\frac{Q_C}{W} = \frac{1 - 0.320}{0.320} = \frac{0.680}{0.320} = 2.125.

Final answer

QCW=2.13\frac{Q_C}{W} = 2.13

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the energy-flow diagram of a heat engine to keep WW, QHQ_H, and QCQ_C clearly separated.

  • Practice expressing ratios like QCW\frac{Q_C}{W} and QHW\frac{Q_H}{W} directly in terms of η\eta before substituting numerical values.

OverviewACEpath Teacher's Diagnosis

03 A student incorrectly inverts the requested ratio and calculates W / Q_C instead of Q_C / W, arriving at 0.471.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    QH=Wη=4800.320=1500 JQ_H = \frac{W}{\eta} = \frac{480}{0.320} = 1500\text{ J}

  2. Step 2

    QC=QH−W=1500−480=1020 JQ_C = Q_H - W = 1500 - 480 = 1020\text{ J}

  3. Step 3

    QCW=4801020=0.471\frac{Q_C}{W} = \frac{480}{1020} = 0.471

    Correct

    QCW=1020 J480 J=2.125≈2.13\frac{Q_C}{W} = \frac{1020\text{ J}}{480\text{ J}} = 2.125 \approx 2.13

    You inverted the ratio by placing WW (480 J480\text{ J}) in the numerator and QCQ_C (1020 J1020\text{ J}) in the denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the definition of thermal efficiency to find the total heat absorbed from the hot reservoir.

You applied the first law of thermodynamics to find the heat exhausted to the cold reservoir.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Ratio Inversion

You accidentally swapped the numerator and denominator when substituting the numerical values into the ratio QCW\frac{Q_C}{W}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You correctly identified which values corresponded to QCQ_C and WW, but swapped their positions in the quotient during the final substitution step, calculating WQC\frac{W}{Q_C} instead.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Ratio Orientation
  • For any requested ratio AB\frac{A}{B}, ensure the value of AA sits in the numerator and BB sits in the denominator.

  • Label each number before substitution: write QC=1020 JQ_C = 1020\text{ J} (numerator) and W=480 JW = 480\text{ J} (denominator), then verify whether the resulting quotient should be greater than or less than 1.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute QC=1020 JQ_C = 1020\text{ J} into the numerator and W=480 JW = 480\text{ J} into the denominator: QCW=1020480\frac{Q_C}{W} = \frac{1020}{480}.

  2. Simplify the fraction: 1020480=2.125≈2.13\frac{1020}{480} = 2.125 \approx 2.13.

Final answer

QCW=2.13\frac{Q_C}{W} = 2.13

NEXT STEPS
Final Takeaways from Your Teacher
  • Perform a sanity check on efficiency: since η<50%\eta < 50\%, the heat dumped to the cold reservoir (QCQ_C) must be greater than the work done (WW), meaning QCW\frac{Q_C}{W} must be strictly greater than 11.

  • Try finding the ratio purely symbolically as QCW=1−ηη\frac{Q_C}{W} = \frac{1-\eta}{\eta} to reduce arithmetic substitution errors.

Lock it in

Similar question

01

A heat engine absorbs 2000 J2000\text{ J} of heat from a high-temperature reservoir and expels 1400 J1400\text{ J} of heat to a low-temperature reservoir in each cycle. Determine its thermal efficiency η\eta and the ratio QCW\frac{Q_C}{W}.

Answer

W=QH−QC=2000 J−1400 J=600 JW = Q_H - Q_C = 2000\text{ J} - 1400\text{ J} = 600\text{ J}. Efficiency η=WQH=6002000=0.30\eta = \frac{W}{Q_H} = \frac{600}{2000} = 0.30 (30.0%30.0\%). Ratio QCW=1400 J600 J=73≈2.33\frac{Q_C}{W} = \frac{1400\text{ J}}{600\text{ J}} = \frac{7}{3} \approx 2.33.

02

An engine operates with an efficiency of η=40.0%\eta = 40.0\% and discards 900 J900\text{ J} of heat to the cold reservoir during each cycle. How much useful mechanical work WW does the engine produce per cycle?

Answer

Using QCW=1−ηη=1−0.400.40=1.50\frac{Q_C}{W} = \frac{1 - \eta}{\eta} = \frac{1 - 0.40}{0.40} = 1.50, we find W=QC1.50=900 J1.50=600 JW = \frac{Q_C}{1.50} = \frac{900\text{ J}}{1.50} = 600\text{ J}.

03

A proposed heat engine claims to produce 250 J250\text{ J} of work while rejecting 500 J500\text{ J} of heat to the cold reservoir. Find the thermal efficiency η\eta of this engine, and determine the ratio QHQC\frac{Q_H}{Q_C}.

Answer

QH=W+QC=250 J+500 J=750 JQ_H = W + Q_C = 250\text{ J} + 500\text{ J} = 750\text{ J}. Efficiency η=WQH=250 J750 J=13≈33.3%\eta = \frac{W}{Q_H} = \frac{250\text{ J}}{750\text{ J}} = \frac{1}{3} \approx 33.3\%. The ratio QHQC=750 J500 J=1.50\frac{Q_H}{Q_C} = \frac{750\text{ J}}{500\text{ J}} = 1.50.

Loading workspace…