Resources

A rigid, thermally insulated container holds 2.50 mol2.50\text{ mol} of an ideal monatomic gas at an initial temperature of Ti=300 KT_i = 300\text{ K}. An electric heating element supplies Q=4.68×103 JQ = 4.68 \times 10^3\text{ J} of heat to the gas at constant volume. Given that the molar heat capacity at constant volume is CV=32RC_V = \frac{3}{2}R where R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K}), determine: (a) the work WW done by the gas, (b) the change in internal energy ΔU\Delta U of the gas, and (c) the final temperature TfT_f of the gas.

Answer and steps

Final answer

(a) W=0 JW = 0\text{ J}; (b) ΔU=4.68×103 J\Delta U = 4.68 \times 10^3\text{ J}; (c) Tf=450 KT_f = 450\text{ K}.

Steps

Part (a): Work Done by the Gas

Work done by an expanding or compressing gas is given by: W=∫P dVW = \int P \, dV

Because the container is rigid, the volume of the gas remains constant throughout the heating process (ΔV=0\Delta V = 0). Therefore, no boundary displacement occurs, and the work done by the gas is: W=0 JW = 0\text{ J}


Part (b): Change in Internal Energy

According to the First Law of Thermodynamics: ΔU=Q−W\Delta U = Q - W

where:

  • QQ is the net heat added to the system (+4.68×103 J+4.68 \times 10^3\text{ J}),
  • WW is the work done by the gas (0 J0\text{ J}),
  • ΔU\Delta U is the change in internal energy.

Substituting the known values: ΔU=4.68×103 J−0 J=4.68×103 J\Delta U = 4.68 \times 10^3\text{ J} - 0\text{ J} = 4.68 \times 10^3\text{ J}

Common Pitfall: Do not confuse heat (QQ), which is energy in transit across a boundary due to a temperature difference, with internal energy (UU), which is a state function representing the total microscopic kinetic and potential energy of the molecules. Here, all the heat absorbed is converted directly into an increase in internal energy because no work is done.


Part (c): Final Temperature of the Gas

For an ideal gas, the change in internal energy depends solely on temperature: ΔU=nCVΔT=nCV(Tf−Ti)\Delta U = n C_V \Delta T = n C_V (T_f - T_i)

  1. Calculate the molar heat capacity at constant volume (CVC_V): CV=32R=32(8.314 J/(mol⋅K))=12.471 J/(mol⋅K)C_V = \frac{3}{2}R = \frac{3}{2}(8.314\text{ J}/(\text{mol}\cdot\text{K})) = 12.471\text{ J}/(\text{mol}\cdot\text{K})
  2. Calculate the temperature change (ΔT\Delta T): ΔT=ΔUnCV=4.68×103 J(2.50 mol)(12.471 J/(mol⋅K))=4680 J31.1775 J/K≈150 K\Delta T = \frac{\Delta U}{n C_V} = \frac{4.68 \times 10^3\text{ J}}{(2.50\text{ mol})(12.471\text{ J}/(\text{mol}\cdot\text{K}))} = \frac{4680\text{ J}}{31.1775\text{ J}/\text{K}} \approx 150\text{ K}
  3. Determine the final temperature (TfT_f): Tf=Ti+ΔT=300 K+150 K=450 KT_f = T_i + \Delta T = 300\text{ K} + 150\text{ K} = 450\text{ K}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student uses the constant-pressure molar heat capacity C_p = 5/2 R instead of C_V = 3/2 R when calculating the temperature rise in an isochoric process.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ΔV=0  ⟹  W=0 J\Delta V = 0 \implies W = 0\text{ J}

  2. Step 2

    ΔU=Q−W=4680 J−0 J  ⟹  ΔU=4680 J\Delta U = Q - W = 4680\text{ J} - 0\text{ J} \implies \Delta U = 4680\text{ J}

  3. Step 3

    ΔU=nCpΔT=n(52R)ΔT  ⟹  4680=2.50×(2.5×8.314)×ΔT  ⟹  ΔT=90.1 K\Delta U = n C_p \Delta T = n\left(\frac{5}{2}R\right)\Delta T \implies 4680 = 2.50 \times (2.5 \times 8.314) \times \Delta T \implies \Delta T = 90.1\text{ K}

    Correct

    ΔU=nCVΔT=n(32R)ΔT  ⟹  4680=2.50×(1.5×8.314)×ΔT  ⟹  ΔT=150 K\Delta U = n C_V \Delta T = n\left(\frac{3}{2}R\right)\Delta T \implies 4680 = 2.50 \times (1.5 \times 8.314) \times \Delta T \implies \Delta T = 150\text{ K}

    You used the constant-pressure heat capacity Cp=52RC_p = \frac{5}{2}R rather than the constant-volume heat capacity CV=32RC_V = \frac{3}{2}R. For an ideal gas, the change in internal energy is always given by ΔU=nCVΔT\Delta U = n C_V \Delta T, especially in this constant-volume (isochoric) process.

  4. Step 4

    Tf=300 K+90.1 K=390.1 KT_f = 300\text{ K} + 90.1\text{ K} = 390.1\text{ K}

    Correct

    Tf=Ti+ΔT=300 K+150 K=450 KT_f = T_i + \Delta T = 300\text{ K} + 150\text{ K} = 450\text{ K}

    You added your calculated ΔT\Delta T to TiT_i correctly, but the numerical result is off due to using CpC_p in the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a rigid container means ΔV=0\Delta V = 0 and W=0 JW = 0\text{ J}.

You applied the First Law of Thermodynamics accurately to find ΔU=4680 J\Delta U = 4680\text{ J}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Wrong Heat Capacity Selection (Cp vs Cv)

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You selected the constant-pressure molar heat capacity Cp=52RC_p = \frac{5}{2}R instead of CV=32RC_V = \frac{3}{2}R. For any ideal gas process, internal energy depends purely on temperature according to ΔU=nCVΔT\Delta U = n C_V \Delta T. Furthermore, the container is rigid, making this an isochoric process where QV=ΔU=nCVΔTQ_V = \Delta U = n C_V \Delta T.

REASONING PATH
Your ACEpath teacher’s suggested approach
Always link $\Delta U$ to $C_V$ for ideal gases
  • For an ideal gas, ΔU=nCVΔT\Delta U = n C_V \Delta T applies to every thermodynamic process (isochoric, isobaric, isothermal, or adiabatic).

  • Whenever you need to relate ΔU\Delta U and ΔT\Delta T for an ideal gas, use CVC_V (which equals 32R\frac{3}{2}R for a monatomic gas), never CpC_p.

Verify boundary constraints
  • A rigid container prevents expansion, meaning volume is constant.

  • Check the problem wording: 'rigid' means isochoric, confirming that heat added directly increases internal energy via CVC_V.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute CV=32R=1.5×8.314 J/(mol⋅K)=12.471 J/(mol⋅K)C_V = \frac{3}{2}R = 1.5 \times 8.314\text{ J}/(\text{mol}\cdot\text{K}) = 12.471\text{ J}/(\text{mol}\cdot\text{K}) into ΔU=nCVΔT\Delta U = n C_V \Delta T.

  2. Solve for ΔT\Delta T: ΔT=4680 J(2.50 mol)(12.471 J/(mol⋅K))=150 K\Delta T = \frac{4680\text{ J}}{(2.50\text{ mol})(12.471\text{ J}/(\text{mol}\cdot\text{K}))} = 150\text{ K}.

  3. Find the final temperature: Tf=Ti+ΔT=300 K+150 K=450 KT_f = T_i + \Delta T = 300\text{ K} + 150\text{ K} = 450\text{ K}.

Final answer

(a) W=0 JW = 0\text{ J}; (b) ΔU=4.68×103 J\Delta U = 4.68 \times 10^3\text{ J}; (c) Tf=450 KT_f = 450\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the distinction between heat capacity at constant volume (CVC_V) and at constant pressure (CpC_p).

  • Practice identifying why ΔU=nCVΔT\Delta U = n C_V \Delta T holds for all ideal gas processes, whereas Q=nCpΔTQ = n C_p \Delta T only holds at constant pressure.

OverviewACEpath Teacher's Diagnosis

02 The student misinterprets heat added as work done by assuming W = Q, leading to zero change in internal energy and an unchanged temperature.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    W=Q=4.68×103 JW = Q = 4.68 \times 10^3\text{ J}

    Correct

    W=∫P dV=0 JW = \int P\,dV = 0\text{ J}

    The problem states that the gas is held in a rigid container at constant volume. Since there is no change in volume (ΔV=0\Delta V = 0), the gas performs no boundary work (W=0 JW = 0\text{ J}). Heat added (QQ) is energy in transit across the boundary, not work done by the gas.

  2. Step 2

    ΔU=Q−W=4680 J−4680 J  ⟹  ΔU=0 J\Delta U = Q - W = 4680\text{ J} - 4680\text{ J} \implies \Delta U = 0\text{ J}

    Correct

    ΔU=Q−W=4.68×103 J−0 J=4.68×103 J\Delta U = Q - W = 4.68 \times 10^3\text{ J} - 0\text{ J} = 4.68 \times 10^3\text{ J}

    You correctly applied the First Law of Thermodynamics (ΔU=Q−W\Delta U = Q - W), but substituting your incorrect value of WW caused your change in internal energy to evaluate to zero.

  3. Step 3

    ΔU=nCVΔT=0  ⟹  ΔT=0 K  ⟹  Tf=Ti=300 K\Delta U = n C_V \Delta T = 0 \implies \Delta T = 0\text{ K} \implies T_f = T_i = 300\text{ K}

    Correct

    ΔT=ΔUnCV=4680 J(2.50 mol)(1.5×8.314 J/(mol⋅K))≈150 K  ⟹  Tf=300 K+150 K=450 K\Delta T = \frac{\Delta U}{n C_V} = \frac{4680\text{ J}}{(2.50\text{ mol})(1.5 \times 8.314\text{ J}/(\text{mol}\cdot\text{K}))} \approx 150\text{ K} \implies T_f = 300\text{ K} + 150\text{ K} = 450\text{ K}

    You correctly used ΔU=nCVΔT\Delta U = n C_V \Delta T to relate internal energy and temperature, but using ΔU=0 J\Delta U = 0\text{ J} from the previous step led to an unchanged temperature.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled and set up the First Law of Thermodynamics, ΔU=Q−W\Delta U = Q - W.

You correctly identified the ideal gas relationship between internal energy change and temperature change, ΔU=nCVΔT\Delta U = n C_V \Delta T.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Conflating Heat and Boundary Work in an Isochoric Process

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You assumed that the heat supplied to the gas must equal the work done by the gas (W=QW = Q), overlooking the physical definition of mechanical boundary work (W=∫P dVW = \int P\,dV). Because the container is rigid, the volume cannot change, so the gas does no work on its surroundings (W=0W = 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Mechanical Work via Volume Change
  • Thermodynamic work done by a gas requires a moving boundary: W=∫P dVW = \int P\,dV. If a container is rigid or the process is isochoric (constant volume), ΔV=0\Delta V = 0 and W=0W = 0.

  • Always look for keywords like 'rigid container', 'fixed volume', or 'isochoric' and immediately set W=0 JW = 0\text{ J}.

Distinguish Heat from Internal Energy and Work
  • Heat (QQ) is energy transferred due to a temperature difference; work (WW) is energy transferred through macroscopic force and displacement; internal energy (UU) is the state function measuring microscopic molecular energy.

  • Do not set W=QW = Q unless a specific isothermal expansion of an ideal gas dictates it; instead, use the First Law ΔU=Q−W\Delta U = Q - W to relate them.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Recognize that because the container is rigid, the volume does not change: W=0 JW = 0\text{ J}.

  2. Substitute Q=4.68×103 JQ = 4.68 \times 10^3\text{ J} and W=0 JW = 0\text{ J} into the First Law: ΔU=Q−W=4.68×103 J\Delta U = Q - W = 4.68 \times 10^3\text{ J}.

  3. Compute CV=32R=12.471 J/(mol⋅K)C_V = \frac{3}{2}R = 12.471\text{ J}/(\text{mol}\cdot\text{K}).

  4. Solve for ΔT=ΔUnCV=4680 J(2.50 mol)(12.471 J/(mol⋅K))≈150 K\Delta T = \frac{\Delta U}{n C_V} = \frac{4680\text{ J}}{(2.50\text{ mol})(12.471\text{ J}/(\text{mol}\cdot\text{K}))} \approx 150\text{ K}.

  5. Add ΔT\Delta T to the initial temperature: Tf=300 K+150 K=450 KT_f = 300\text{ K} + 150\text{ K} = 450\text{ K}.

Final answer

(a) W=0 JW = 0\text{ J}; (b) ΔU=4.68×103 J\Delta U = 4.68 \times 10^3\text{ J}; (c) Tf=450 KT_f = 450\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the conditions for thermodynamic work and practice identifying isochoric processes where boundary displacement is zero.

  • Keep QQ, WW, and ΔU\Delta U distinct as transfer quantities versus state variables when setting up the First Law of Thermodynamics.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the temperature change correctly but forgets to add the initial temperature, reporting ΔT as the final temperature.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Rigid container means ΔV=0  ⟹  W=0 J\Delta V = 0 \implies W = 0\text{ J}

  2. Step 2

    ΔU=Q−W=4680 J−0 J  ⟹  ΔU=4680 J\Delta U = Q - W = 4680\text{ J} - 0\text{ J} \implies \Delta U = 4680\text{ J}

  3. Step 3

    ΔU=n(32R)ΔT  ⟹  4680=2.50×1.5×8.314×ΔT  ⟹  4680=31.18×ΔT\Delta U = n\left(\frac{3}{2}R\right)\Delta T \implies 4680 = 2.50 \times 1.5 \times 8.314 \times \Delta T \implies 4680 = 31.18 \times \Delta T

  4. Step 4

    Tf=150.1 KT_f = 150.1\text{ K}

    Correct

    Tf=Ti+ΔT=300 K+150.1 K≈450 KT_f = T_i + \Delta T = 300\text{ K} + 150.1\text{ K} \approx 450\text{ K}

    You set TfT_f directly equal to the change in temperature ΔT\Delta T, forgetting that heating adds to the initial temperature Ti=300 KT_i = 300\text{ K}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly identified that a rigid boundary prevents boundary work, giving W=0 JW = 0\text{ J}.

You properly applied the First Law of Thermodynamics to find ΔU\Delta U.

You used the correct molar heat capacity CV=32RC_V = \frac{3}{2}R and solved for the temperature change ΔT\Delta T accurately.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
State Variable vs. Interval Change Confusion

You calculated ΔT=150.1 K\Delta T = 150.1\text{ K} correctly but wrote it down as TfT_f without adding the initial temperature Ti=300 KT_i = 300\text{ K}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing a change in a state variable (ΔT=Tf−Ti\Delta T = T_f - T_i) with the final value of that state variable (TfT_f). Equations involving heat capacity yield the temperature interval ΔT\Delta T, not the absolute state temperature TfT_f.

REASONING PATH
Your ACEpath teacher’s suggested approach
State vs. Change
  • Thermal equations involving internal energy or heat yield ΔT\Delta T, which represents the difference Tf−TiT_f - T_i, not the instantaneous final temperature TfT_f.

  • Always write ΔT=Tf−Ti\Delta T = T_f - T_i explicitly before isolating Tf=Ti+ΔTT_f = T_i + \Delta T.

Physical Reality Check
  • Adding heat (Q>0Q > 0) to a closed gas at constant volume must increase its temperature above its initial value (Tf>TiT_f > T_i).

  • Compare your calculated TfT_f with TiT_i. Since heat was added to gas starting at 300 K300\text{ K}, a result of 150.1 K150.1\text{ K} indicates cooling, signaling an omitted initial temperature.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Solve for the temperature change: ΔT=4680 J31.1775 J/K≈150.1 K\Delta T = \frac{4680\text{ J}}{31.1775\text{ J}/\text{K}} \approx 150.1\text{ K}.

  2. Express the final temperature in terms of initial temperature and change: Tf=Ti+ΔTT_f = T_i + \Delta T.

  3. Substitute Ti=300 KT_i = 300\text{ K}: Tf=300 K+150.1 K=450.1 K≈450 KT_f = 300\text{ K} + 150.1\text{ K} = 450.1\text{ K} \approx 450\text{ K}.

Final answer

Tf=450 KT_f = 450\text{ K}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out the full definition ΔT=(Tf−Ti)\Delta T = (T_f - T_i) directly inside ΔU=nCV(Tf−Ti)\Delta U = n C_V (T_f - T_i) to avoid dropping TiT_i.

  • Perform a sanity check on thermodynamic processes: if heat is absorbed and no work is done, TfT_f must be strictly greater than TiT_i.

Lock it in

Similar question

01

A rigid sealed tank holds 3.00 mol3.00\text{ mol} of an ideal monatomic gas (CV=32RC_V = \frac{3}{2}R) initially at 280 K280\text{ K}. If 5.61×103 J5.61 \times 10^3\text{ J} of heat is added, find: (a) the work done by the gas, and (b) the final temperature of the gas. (Use R=8.314 J/(mol⋅K)R = 8.314\text{ J}/(\text{mol}\cdot\text{K})).

Answer

(a) W=0 JW = 0\text{ J} because volume is constant. (b) ΔU=Q=5610 J\Delta U = Q = 5610\text{ J}. Then ΔT=ΔUnCV=56103.00×1.5×8.314=561037.413=150 K\Delta T = \frac{\Delta U}{n C_V} = \frac{5610}{3.00 \times 1.5 \times 8.314} = \frac{5610}{37.413} = 150\text{ K}. Final temperature Tf=280 K+150 K=430 KT_f = 280\text{ K} + 150\text{ K} = 430\text{ K}.

02

An ideal monatomic gas (1.50 mol1.50\text{ mol}) undergoes an isobaric (constant-pressure) expansion from 300 K300\text{ K} to 400 K400\text{ K}. Given CV=32RC_V = \frac{3}{2}R and Cp=52RC_p = \frac{5}{2}R, determine: (a) the change in internal energy ΔU\Delta U, and (b) the heat input QQ.

Answer

(a) ΔU=nCVΔT=(1.50)(1.5×8.314)(100)≈1871 J\Delta U = n C_V \Delta T = (1.50)(1.5 \times 8.314)(100) \approx 1871\text{ J}. Notice CVC_V is used for ΔU\Delta U even at constant pressure. (b) Q=nCpΔT=(1.50)(2.5×8.314)(100)≈3118 JQ = n C_p \Delta T = (1.50)(2.5 \times 8.314)(100) \approx 3118\text{ J}.

03

Two moles of an ideal diatomic gas (CV=52RC_V = \frac{5}{2}R, Cp=72RC_p = \frac{7}{2}R) are heated from T1=300 KT_1 = 300\text{ K} to T2=360 KT_2 = 360\text{ K} via two different pathways: Path A is isochoric, and Path B is isobaric. Compare the change in internal energy ΔU\Delta U and heat supplied QQ for both paths.

Answer

For both paths, ΔU=nCVΔT=2(2.5×8.314)(60)≈2494 J\Delta U = n C_V \Delta T = 2(2.5 \times 8.314)(60) \approx 2494\text{ J} because ΔU\Delta U is a state function and depends only on ΔT\Delta T. For Path A (isochoric): W=0W = 0, so QA=ΔU≈2494 JQ_A = \Delta U \approx 2494\text{ J}. For Path B (isobaric): QB=nCpΔT=2(3.5×8.314)(60)≈3492 JQ_B = n C_p \Delta T = 2(3.5 \times 8.314)(60) \approx 3492\text{ J} (the extra ≈998 J\approx 998\text{ J} goes into expansion work W=nRΔTW = nR\Delta T).

Loading workspace…