Resources

A 12.0 kg12.0\text{ kg} equipment package is hauled up a rough ramp inclined at an angle ϕ=20.0∘\phi = 20.0^\circ above the horizontal. A winch cable pulls parallel to the ramp with a tension of T=95.0 NT = 95.0\text{ N} while a constant kinetic friction force of fk=22.0 Nf_k = 22.0\text{ N} opposes the motion. The package travels a distance s=4.50 ms = 4.50\text{ m} up the ramp. Using an explicit Cartesian coordinate system where the positive xx-axis points up the incline: (a) determine the work done by the cable tension WTW_T, (b) determine the work done by friction WfW_f, (c) determine the work done by gravity WgW_g, and (d) compute the net work WnetW_{\text{net}} and explain why WgW_g must carry a negative sign in the work-energy balance. Take g=9.80 m/s2g = 9.80\text{ m/s}^2.

Answer and steps

Final answer

(a) WT=+428 JW_T = +428\text{ J}; (b) Wf=−99.0 JW_f = -99.0\text{ J}; (c) Wg=−181 JW_g = -181\text{ J}; (d) Wnet=+148 JW_{\text{net}} = +148\text{ J} (WgW_g is negative because the component of gravity along the incline acts antiparallel to the displacement vector s⃗\vec{s})

Steps

Coordinate System and Force Breakdown

Set the coordinate axes such that:

  • The +x+x-axis points up along the incline parallel to the displacement vector s⃗\vec{s}, so s⃗=(4.50 m) i^\vec{s} = (4.50\text{ m})\,\hat{i}.
  • The +y+y-axis points perpendicular to the ramp and outward.

The forces acting on the 12.0 kg12.0\text{ kg} package are:

  1. Cable tension T⃗\vec{T}: Directed along +x+x, so T⃗=(95.0 N) i^\vec{T} = (95.0\text{ N})\,\hat{i}.
  2. Kinetic friction f⃗k\vec{f}_k: Opposes the motion, directed along −x-x, so f⃗k=−(22.0 N) i^\vec{f}_k = -(22.0\text{ N})\,\hat{i}.
  3. Gravity F⃗g\vec{F}_g: Directed vertically downward with magnitude Fg=mg=(12.0 kg)(9.80 m/s2)=117.6 NF_g = mg = (12.0\text{ kg})(9.80\text{ m/s}^2) = 117.6\text{ N}. Resolving into components relative to the incline: Fgx=−mgsin⁡ϕ=−(117.6 N)sin⁡(20.0∘)≈−40.22 NF_{gx} = -mg \sin\phi = -(117.6\text{ N})\sin(20.0^\circ) \approx -40.22\text{ N} Fgy=−mgcos⁡ϕ=−(117.6 N)cos⁡(20.0∘)≈−110.5 NF_{gy} = -mg \cos\phi = -(117.6\text{ N})\cos(20.0^\circ) \approx -110.5\text{ N}
  4. Normal force N⃗\vec{N}: Directed along +y+y. Since N⃗⊥s⃗\vec{N} \perp \vec{s}, its work is identically zero: WN=0 JW_N = 0\text{ J}.

(a) Work Done by the Cable Tension (WTW_T)

The tension acts in the exact direction of motion (θ=0∘\theta = 0^\circ): WT=Tscos⁡(0∘)=(95.0 N)(4.50 m)(1)=+427.5 J≈+428 JW_T = T s \cos(0^\circ) = (95.0\text{ N})(4.50\text{ m})(1) = +427.5\text{ J} \approx +428\text{ J}


(b) Work Done by Kinetic Friction (WfW_f)

Kinetic friction acts antiparallel to the displacement (θ=180∘\theta = 180^\circ): Wf=fkscos⁡(180∘)=(22.0 N)(4.50 m)(−1)=−99.0 JW_f = f_k s \cos(180^\circ) = (22.0\text{ N})(4.50\text{ m})(-1) = -99.0\text{ J}


(c) Work Done by Gravity (WgW_g)

The work done by gravity can be determined by taking the product of the displacement and the parallel component of gravity Fgx=−mgsin⁡ϕF_{gx} = -mg\sin\phi: Wg=Fgx⋅s=−mgsin⁡(20.0∘)⋅sW_g = F_{gx} \cdot s = -mg \sin(20.0^\circ) \cdot s Wg=−(12.0 kg)(9.80 m/s2)sin⁡(20.0∘)(4.50 m)W_g = -(12.0\text{ kg})(9.80\text{ m/s}^2)\sin(20.0^\circ)(4.50\text{ m}) Wg≈−(117.6 N)(0.34202)(4.50 m)≈−180.996 J≈−181 JW_g \approx -(117.6\text{ N})(0.34202)(4.50\text{ m}) \approx -180.996\text{ J} \approx -181\text{ J}

(Alternative check using the vertical height gained: h=ssin⁡(20.0∘)=4.50sin⁡(20.0∘)≈1.539 mh = s\sin(20.0^\circ) = 4.50\sin(20.0^\circ) \approx 1.539\text{ m}, giving Wg=−mgh=−(117.6)(1.539)≈−181 JW_g = -mgh = -(117.6)(1.539) \approx -181\text{ J}.)


(d) Net Work (WnetW_{\text{net}}) and Physical Significance of the Negative Sign

The net work is the scalar sum of the work done by all individual forces: Wnet=WT+Wf+Wg+WNW_{\text{net}} = W_T + W_f + W_g + W_N Wnet=427.5 J−99.0 J−181.0 J+0 J=+147.5 J≈+148 JW_{\text{net}} = 427.5\text{ J} - 99.0\text{ J} - 181.0\text{ J} + 0\text{ J} = +147.5\text{ J} \approx +148\text{ J}

Why WgW_g carries a negative sign:

  • Vector perspective: The angle between the downward vertical force vector F⃗g\vec{F}_g and the displacement vector s⃗\vec{s} pointing up the ramp is obtuse (θ=90∘+20.0∘=110.0∘\theta = 90^\circ + 20.0^\circ = 110.0^\circ). Because cos⁡(110.0∘)<0\cos(110.0^\circ) < 0, the parallel component of gravity acts in the −x-x direction (antiparallel to s⃗\vec{s}), removing energy from the package's kinetic store.
  • Energy transfer perspective: In the work-energy theorem, work done by conservative forces relates to potential energy by Wg=−ΔUgW_g = -\Delta U_g. As the package moves to a higher elevation, its gravitational potential energy increases (ΔUg>0\Delta U_g > 0), meaning gravity performs negative work to store that energy.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the trigonometric component for the incline and uses cosine instead of sine to find the work done by gravity, obtaining -497 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    WT=T⋅s=(95.0)(4.50)=427.5 JW_T = T \cdot s = (95.0)(4.50) = 427.5\text{ J}

  2. Step 2

    Wf=−fk⋅s=−(22.0)(4.50)=−99.0 JW_f = -f_k \cdot s = -(22.0)(4.50) = -99.0\text{ J}

  3. Step 3

    Wg=−m⋅g⋅s⋅cos⁡(20.0∘)  ⟹  Wg=−(12.0)(9.80)(4.50)⋅cos⁡(20.0∘)=−497.3 J=−497 JW_g = -m \cdot g \cdot s \cdot \cos(20.0^\circ) \implies W_g = -(12.0)(9.80)(4.50) \cdot \cos(20.0^\circ) = -497.3\text{ J} = -497\text{ J}

    Correct

    Wg=−mgsin⁡(20.0∘)⋅s=−(12.0 kg)(9.80 m/s2)sin⁡(20.0∘)(4.50 m)≈−181 JW_g = -mg \sin(20.0^\circ) \cdot s = -(12.0\text{ kg})(9.80\text{ m/s}^2)\sin(20.0^\circ)(4.50\text{ m}) \approx -181\text{ J}

    You used cos⁡(20.0∘)\cos(20.0^\circ) instead of sin⁡(20.0∘)\sin(20.0^\circ). When an incline angle ϕ\phi is measured from the horizontal, the component of gravity parallel to the incline is mgsin⁡ϕmg\sin\phi (opposite to the incline angle), whereas mgcos⁡ϕmg\cos\phi is perpendicular to the incline.

  4. Step 4

    Wnet=427.5−99.0−497.3=−168.8 J=−169 JW_{\text{net}} = 427.5 - 99.0 - 497.3 = -168.8\text{ J} = -169\text{ J}

    Correct

    Wnet=WT+Wf+Wg=427.5 J−99.0 J−181.0 J=+148 JW_{\text{net}} = W_T + W_f + W_g = 427.5\text{ J} - 99.0\text{ J} - 181.0\text{ J} = +148\text{ J}

    You correctly summed your calculated work terms, but the numerical result was affected by the incorrect value of WgW_g from the previous step.

  5. Step 5

    Gravity does negative work because the component of gravity acts downward along the ramp opposing the motion.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the positive work done by the pulling tension.

You correctly calculated the negative work done by kinetic friction.

You correctly recognized that gravity opposes upward motion and must perform negative work.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric Component Error on Incline

You set the parallel component of weight equal to mgcos⁡ϕmg\cos\phi instead of mgsin⁡ϕmg\sin\phi.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the trigonometric projections for inclined planes by associating the horizontal/parallel direction with cosine by default, rather than drawing the weight vector decomposition where the angle with the incline normal is ϕ\phi.

REASONING PATH
Your ACEpath teacher’s suggested approach
Resolve Weight on an Incline
  • For an incline at angle ϕ\phi above the horizontal, the weight components are Fg,∥=mgsin⁡ϕF_{g,\parallel} = mg\sin\phi along the ramp and Fg,⊥=mgcos⁡ϕF_{g,\perp} = mg\cos\phi perpendicular to the ramp.

  • Always sketch the right triangle formed by F⃗g\vec{F}_g: notice that the incline angle ϕ\phi sits between the true vertical downward vector and the perpendicular-to-ramp axis, making the parallel component the opposite side (sinϕ\\sin\phi).

Alternative Height Check
  • Wg=−mgΔy=−mghW_g = -mg\Delta y = -mgh, where h=ssin⁡ϕh = s\sin\phi is the vertical elevation gained.

  • Check your work using vertical elevation: h=(4.50 m)sin⁡(20.0∘)≈1.54 mh = (4.50\text{ m})\sin(20.0^\circ) \approx 1.54\text{ m}, yielding Wg=−(12.0)(9.80)(1.54)≈−181 JW_g = -(12.0)(9.80)(1.54) \approx -181\text{ J}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the parallel component of gravity opposing the displacement: Fgx=−mgsin⁡(20.0∘)=−(12.0 kg)(9.80 m/s2)sin⁡(20.0∘)≈−40.22 NF_{gx} = -mg\sin(20.0^\circ) = -(12.0\text{ kg})(9.80\text{ m/s}^2)\sin(20.0^\circ) \approx -40.22\text{ N}.

  2. Multiply by the displacement s=4.50 ms = 4.50\text{ m}: Wg=(−40.22 N)(4.50 m)≈−181.0 JW_g = (-40.22\text{ N})(4.50\text{ m}) \approx -181.0\text{ J}.

  3. Recalculate the net work: Wnet=WT+Wf+Wg=427.5 J−99.0 J−181.0 J=+147.5 J≈+148 JW_{\text{net}} = W_T + W_f + W_g = 427.5\text{ J} - 99.0\text{ J} - 181.0\text{ J} = +147.5\text{ J} \approx +148\text{ J}.

Final answer

(a) WT=+428 JW_T = +428\text{ J}; (b) Wf=−99.0 JW_f = -99.0\text{ J}; (c) Wg=−181 JW_g = -181\text{ J}; (d) Wnet=+148 JW_{\text{net}} = +148\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review vector decomposition on inclines and verify why the component along the ramp takes the sine function.

  • Practice computing work done by gravity using both the component method (Fg,∥⋅sF_{g,\parallel} \cdot s) and the elevation change method (−mgΔy-mg\Delta y).

  • Complete the follow-up practice problems to reinforce selecting the correct trigonometric ratios on ramps.

OverviewACEpath Teacher's Diagnosis

02 The student treats work as inherently positive or omits the direction of the opposing forces, setting the signs of friction and gravity to positive.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    WT=(95.0)(4.50)=427.5 JW_T = (95.0)(4.50) = 427.5\text{ J}

  2. Step 2

    Wf=fk∗s=(22.0)(4.50)=99.0 JW_f = f_k * s = (22.0)(4.50) = 99.0\text{ J}

    Correct

    Wf=fkscos⁡(180∘)=−99.0 JW_f = f_k s \cos(180^\circ) = -99.0\text{ J}

    Because kinetic friction acts directly opposite to the displacement (θ=180∘\theta = 180^\circ), the work done by friction must be negative: Wf=−99.0 JW_f = -99.0\text{ J}.

  3. Step 3

    Wg=m∗g∗s∗sin⁡(20.0∘)  ⟹  Wg=(12.0)(9.80)(4.50)∗sin⁡(20.0∘)=181.0 J=181 JW_g = m * g * s * \sin(20.0^\circ) \implies W_g = (12.0)(9.80)(4.50) * \sin(20.0^\circ) = 181.0\text{ J} = 181\text{ J}

    Correct

    Wg=−mgssin⁡(20.0∘)=−181 JW_g = -m g s \sin(20.0^\circ) = -181\text{ J}

    You accurately resolved the component of gravity along the incline, but because this component points down the ramp while the displacement is up the ramp, the work done by gravity is negative: Wg=−181 JW_g = -181\text{ J}.

  4. Step 4

    Wnet=427.5+99.0+181.0=707.5 J=708 JW_{\text{net}} = 427.5 + 99.0 + 181.0 = 707.5\text{ J} = 708\text{ J}

    Correct

    Wnet=WT+Wf+Wg=427.5 J−99.0 J−181.0 J=+148 JW_{\text{net}} = W_T + W_f + W_g = 427.5\text{ J} - 99.0\text{ J} - 181.0\text{ J} = +148\text{ J}

    Your net work formula summed the absolute values instead of combining signed scalar quantities with their negative signs from parts (b) and (c).

  5. Step 5

    Gravity takes energy away because the downward component points opposite to the upward displacement.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the magnitude of the work done by cable tension, friction, and gravity.

You accurately resolved the gravitational force component parallel to the ramp using the incline angle.

You clearly explained why gravity removes energy when an object moves against the gravitational force component.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention for work done by opposing forces

You recognized in words that opposing forces remove energy, but you calculated their work as positive magnitudes in the algebraic lines.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Work is a signed scalar quantity defined by W=F⃗⋅s⃗=Fscos⁡θW = \vec{F} \cdot \vec{s} = F s \cos\theta. When a force has a component opposite to the direction of motion (90∘<θ≤180∘90^\circ < \theta \le 180^\circ), cos⁡θ\cos\theta is negative, requiring the resulting work value to carry an explicit minus sign before summing into WnetW_{\text{net}}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Evaluate the Angle $\theta$ Between $\vec{F}$ and $\vec{s}$
  • W=Fscos⁡θW = F s \cos\theta, where θ\theta is the angle between force and displacement vectors.

  • Always write out cos⁡θ\cos\theta explicitly: if θ=180∘\theta = 180^\circ, insert cos⁡(180∘)=−1\cos(180^\circ) = -1 immediately.

Sign of Net Work Components
  • Wnet=∑WiW_{\text{net}} = \sum W_i, summing signed scalar values.

  • Substitute each individual work term with its proper sign rather than adding positive magnitudes.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply the scalar product definition for friction: Wf=fkscos⁡(180∘)=(22.0 N)(4.50 m)(−1)=−99.0 JW_f = f_k s \cos(180^\circ) = (22.0\text{ N})(4.50\text{ m})(-1) = -99.0\text{ J}.

  2. Apply the scalar product definition for gravity along the incline: Wg=−mgssin⁡(20.0∘)=−(12.0)(9.80)(4.50)sin⁡(20.0∘)=−181 JW_g = -m g s \sin(20.0^\circ) = -(12.0)(9.80)(4.50)\sin(20.0^\circ) = -181\text{ J}.

  3. Sum the signed values to find net work: Wnet=WT+Wf+Wg=427.5 J+(−99.0 J)+(−181.0 J)=+147.5 J≈+148 JW_{\text{net}} = W_T + W_f + W_g = 427.5\text{ J} + (-99.0\text{ J}) + (-181.0\text{ J}) = +147.5\text{ J} \approx +148\text{ J}.

Final answer

(a) WT=+428 JW_T = +428\text{ J}, (b) Wf=−99.0 JW_f = -99.0\text{ J}, (c) Wg=−181 JW_g = -181\text{ J}, (d) Wnet=+148 JW_{\text{net}} = +148\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Include the directional term cos⁡θ\cos\theta in your initial formula line whenever computing work for an individual force.

  • Check that any force opposing displacement produces a negative value of work before adding terms together for net work.

OverviewACEpath Teacher's Diagnosis

03 The student uses the total weight rather than resolving gravity along the incline, calculating work done by gravity as -m*g*s = -529 J.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    WT=(95.0)(4.50)=427.5 JW_T = (95.0)(4.50) = 427.5\text{ J}

  2. Step 2

    Wf=−(22.0)(4.50)=−99.0 JW_f = -(22.0)(4.50) = -99.0\text{ J}

  3. Step 3

    Wg=−m∗g∗s=−(12.0)(9.80)(4.50)=−529.2 J=−529 JW_g = -m * g * s = -(12.0)(9.80)(4.50) = -529.2\text{ J} = -529\text{ J}

    Correct

    Wg=−mgsin⁡(20.0∘)s=−(12.0 kg)(9.80 m/s2)sin⁡(20.0∘)(4.50 m)≈−181 JW_g = -mg \sin(20.0^\circ) s = -(12.0\text{ kg})(9.80\text{ m/s}^2)\sin(20.0^\circ)(4.50\text{ m}) \approx -181\text{ J}

    You used the full weight mgmg along the ramp displacement ss, but gravity acts vertically downward. Only the component of gravity parallel to the incline, Fgx=−mgsin⁡ϕF_{gx} = -mg \sin\phi, does work over the displacement along the ramp (or equivalently, Wg=−mgh=−mg(ssin⁡ϕ)W_g = -mg h = -mg(s\sin\phi)).

  4. Step 4

    Wnet=427.5−99.0−529.2=−200.7 J=−201 JW_{\text{net}} = 427.5 - 99.0 - 529.2 = -200.7\text{ J} = -201\text{ J}

    Correct

    Wnet=WT+Wf+Wg=427.5 J−99.0 J−181.0 J=+147.5 J≈+148 JW_{\text{net}} = W_T + W_f + W_g = 427.5\text{ J} - 99.0\text{ J} - 181.0\text{ J} = +147.5\text{ J} \approx +148\text{ J}

    Your method of summing the individual works to find the net work was correct, but the numerical result was affected by the incorrect value of WgW_g from Step 3.

  5. Step 5

    Gravity does negative work because it pulls downward against the upward motion along the ramp.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly calculated the work done by the tension force acting parallel to the ramp.

You correctly assigned a negative sign and calculated the work done by kinetic friction opposing the motion.

You correctly summed the individual work quantities to set up the calculation for net work.

You provided an accurate physical rationale for why gravity performs negative work during an upward ascent.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of incline angle in work by gravity

You treated gravity as if it acted parallel to the displacement along the incline rather than vertically downward.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the full magnitude of a force vector with its component along the direction of displacement. In general, work is the dot product W=F⃗⋅s⃗=Fscos⁡θW = \vec{F} \cdot \vec{s} = F s \cos\theta. Because gravity is vertical and the ramp is inclined at an angle ϕ\phi to the horizontal, the angle between F⃗g\vec{F}_g and s⃗\vec{s} is 90∘+ϕ=110.0∘90^\circ + \phi = 110.0^\circ, introducing a factor of cos⁡(110.0∘)=−sin⁡(20.0∘)\cos(110.0^\circ) = -\sin(20.0^\circ).

REASONING PATH
Your ACEpath teacher’s suggested approach
Work via Vector Dot Product
  • W=F⃗⋅s⃗=Fscos⁡θW = \vec{F} \cdot \vec{s} = F s \cos\theta, where θ\theta is the angle between the force vector and displacement vector.

  • Always sketch the vectors F⃗\vec{F} and s⃗\vec{s} from a common origin to verify the exact angle between them before multiplying magnitudes.

Work Done by Gravity on an Incline
  • Wg=±mgh=±mg(ssin⁡ϕ)W_g = \pm mg h = \pm mg(s \sin\phi), or Wg=Fg,∥s=(−mgsin⁡ϕ)sW_g = F_{g,\parallel} s = (-mg \sin\phi)s.

  • Check your calculation by comparing the component method along the incline with the vertical elevation gain method.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Resolve gravity along the inclined coordinate axis: Fgx=−mgsin⁡(20.0∘)=−(12.0 kg)(9.80 m/s2)sin⁡(20.0∘)≈−40.22 NF_{gx} = -mg \sin(20.0^\circ) = -(12.0\text{ kg})(9.80\text{ m/s}^2)\sin(20.0^\circ) \approx -40.22\text{ N}.

  2. Compute the work done by gravity along displacement s=4.50 ms = 4.50\text{ m}: Wg=Fgxs=(−40.22 N)(4.50 m)≈−181 JW_g = F_{gx} s = (-40.22\text{ N})(4.50\text{ m}) \approx -181\text{ J}.

  3. Recompute the net work by summing all contributions: Wnet=WT+Wf+Wg=427.5 J−99.0 J−181.0 J=+147.5 J≈+148 JW_{\text{net}} = W_T + W_f + W_g = 427.5\text{ J} - 99.0\text{ J} - 181.0\text{ J} = +147.5\text{ J} \approx +148\text{ J}.

Final answer

(a) WT=+428 JW_T = +428\text{ J}; (b) Wf=−99.0 JW_f = -99.0\text{ J}; (c) Wg=−181 JW_g = -181\text{ J}; (d) Wnet=+148 JW_{\text{net}} = +148\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice finding the work done by non-parallel forces using both the dot product definition Fscos⁡θF s \cos\theta and the component-along-displacement method.

  • Use the vertical elevation change formula Wg=−mgΔyW_g = -mg\Delta y as a quick sanity check whenever an object moves along an incline.

Lock it in

Similar question

01

A 5.00 kg5.00\text{ kg} cart is pushed a distance of 3.00 m3.00\text{ m} up a frictionless ramp inclined at 30.0∘30.0^\circ above the horizontal. Using g=9.80 m/s2g = 9.80\text{ m/s}^2, calculate the work done on the cart by gravity.

Answer

Wg=−73.5 JW_g = -73.5\text{ J}. Key steps: h=ssin⁡(30.0∘)=(3.00 m)(0.500)=1.50 mh = s\sin(30.0^\circ) = (3.00\text{ m})(0.500) = 1.50\text{ m}. Then Wg=−mgh=−(5.00 kg)(9.80 m/s2)(1.50 m)=−73.5 JW_g = -mgh = -(5.00\text{ kg})(9.80\text{ m/s}^2)(1.50\text{ m}) = -73.5\text{ J}.

02

A 10.0 kg10.0\text{ kg} box is pulled 6.00 m6.00\text{ m} up a 25.0∘25.0^\circ incline by a rope pulling parallel to the surface with a tension of 80.0 N80.0\text{ N}. A constant friction force of 15.0 N15.0\text{ N} opposes the motion. Take g=9.80 m/s2g = 9.80\text{ m/s}^2. Determine the net work WnetW_{\text{net}} done on the box.

Answer

Wnet=+142 JW_{\text{net}} = +142\text{ J}. Key steps: WT=(80.0 N)(6.00 m)=+480 JW_T = (80.0\text{ N})(6.00\text{ m}) = +480\text{ J}; Wf=−(15.0 N)(6.00 m)=−90.0 JW_f = -(15.0\text{ N})(6.00\text{ m}) = -90.0\text{ J}; Wg=−mgssin⁡(25.0∘)=−(10.0)(9.80)(6.00)sin⁡(25.0∘)≈−248.5 JW_g = -mg s \sin(25.0^\circ) = -(10.0)(9.80)(6.00)\sin(25.0^\circ) \approx -248.5\text{ J}. Net work: Wnet=480−90.0−248.5=+141.5 J≈+142 JW_{\text{net}} = 480 - 90.0 - 248.5 = +141.5\text{ J} \approx +142\text{ J}.

03

A crate of mass mm is lowered down a rough ramp inclined at an angle θ\theta at constant speed over a distance LL along the ramp. (a) Express the work done by gravity WgW_g in terms of m,g,L,m, g, L, and θ\theta. (b) Explain whether WgW_g is positive or negative.

Answer

(a) Wg=+mgLsin⁡θW_g = +mgL\sin\theta. (b) WgW_g is positive because the downward displacement along the incline has a component in the same direction as the downward force of gravity (or because the elevation decreases, Δy=−Lsin⁡θ\Delta y = -L\sin\theta, giving Wg=−mgΔy=+mgLsin⁡θW_g = -mg\Delta y = +mgL\sin\theta).

Loading workspace…