Resources

A student claims that doubling the temperature of a sample of neon gas from 20.0∘C20.0^\circ\text{C} to 40.0∘C40.0^\circ\text{C} doubles the average translational kinetic energy of its atoms, according to the kinetic-molecular relation K‾=32kBT\overline{K} = \frac{3}{2}k_\text{B}T. (a) Convert both temperatures to kelvins to three significant figures. (b) Calculate the true ratio of the final average kinetic energy to the initial average kinetic energy (K‾2/K‾1\overline{K}_2 / \overline{K}_1). (c) Determine what final temperature in degrees Celsius (∘C^\circ\text{C}) would be required to genuinely double the average kinetic energy of the gas from its initial 20.0∘C20.0^\circ\text{C} state.

Answer and steps

Final answer

(a) T1=293.2 KT_1 = 293.2\text{ K}, T2=313.2 KT_2 = 313.2\text{ K}; (b) K‾2K‾1=1.07\frac{\overline{K}_2}{\overline{K}_1} = 1.07; (c) 313∘C313^\circ\text{C}

Steps

Part (a): Converting Celsius Temperatures to Kelvins

In thermodynamic and kinetic-molecular equations, temperature must be expressed on the absolute temperature scale (Kelvin). The conversion relation between the Celsius scale (tt) and the Kelvin scale (TT) is:

T=t+273.15T = t + 273.15

Applying this to the initial and final temperatures:

  • For the initial temperature t1=20.0∘Ct_1 = 20.0^\circ\text{C}: T1=20.0+273.15=293.15 K≈293.2 KT_1 = 20.0 + 273.15 = 293.15\text{ K} \approx 293.2\text{ K}
  • For the final temperature t2=40.0∘Ct_2 = 40.0^\circ\text{C}: T2=40.0+273.15=313.15 K≈313.2 KT_2 = 40.0 + 273.15 = 313.15\text{ K} \approx 313.2\text{ K}

Part (b): Calculating the Ratio of Average Kinetic Energies

According to the kinetic-molecular theory of gases, the average translational kinetic energy K‾\overline{K} of an ideal gas atom is directly proportional to its absolute temperature TT:

K‾=32kBT\overline{K} = \frac{3}{2}k_\text{B}T

Since 32kB\frac{3}{2}k_\text{B} is a constant, the ratio of the average kinetic energies depends solely on the ratio of their absolute temperatures in kelvins:

K‾2K‾1=T2T1\frac{\overline{K}_2}{\overline{K}_1} = \frac{T_2}{T_1}

Substituting the absolute temperatures calculated in part (a):

K‾2K‾1=313.2 K293.2 K≈1.07\frac{\overline{K}_2}{\overline{K}_1} = \frac{313.2\text{ K}}{293.2\text{ K}} \approx 1.07

Common Pitfall: A temperature reading on the Celsius scale is an arbitrary interval scale with a zero point set at the freezing point of water, not at absolute zero. Doubling the Celsius value (from 20.0∘C20.0^\circ\text{C} to 40.0∘C40.0^\circ\text{C}) does not double the thermal energy; it only increases the average kinetic energy by roughly 7%7\%.


Part (c): Temperature Required to Genuinely Double the Kinetic Energy

To double the average translational kinetic energy (K‾new=2K‾1\overline{K}_\text{new} = 2\overline{K}_1), the absolute temperature must be doubled:

Tnew=2⋅T1=2⋅293.15 K=586.3 KT_\text{new} = 2 \cdot T_1 = 2 \cdot 293.15\text{ K} = 586.3\text{ K}

Convert this target absolute temperature back to degrees Celsius:

tnew=Tnew−273.15=586.3 K−273.15=313.15∘C≈313∘Ct_\text{new} = T_\text{new} - 273.15 = 586.3\text{ K} - 273.15 = 313.15^\circ\text{C} \approx 313^\circ\text{C}

Thus, to truly double the average kinetic energy of the neon atoms, the gas must be heated to 313∘C313^\circ\text{C}.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student calculates the ratio directly using Celsius temperatures instead of absolute temperature in kelvins, concluding the energy doubles.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T1=20.0+273=293 K  ⟹  T2=40.0+273=313 KT_1 = 20.0 + 273 = 293\text{ K} \implies T_2 = 40.0 + 273 = 313\text{ K}

  2. Step 2

    K2K1=40.0∘C20.0∘C  ⟹  K2K1=2.00\frac{K_2}{K_1} = \frac{40.0^\circ\text{C}}{20.0^\circ\text{C}} \implies \frac{K_2}{K_1} = 2.00

    Correct

    K‾2K‾1=T2T1=313 K293 K≈1.07\frac{\overline{K}_2}{\overline{K}_1} = \frac{T_2}{T_1} = \frac{313\text{ K}}{293\text{ K}} \approx 1.07

    Average translational kinetic energy K‾=32kBT\overline{K} = \frac{3}{2}k_\text{B}T is directly proportional to absolute temperature TT in kelvins, not temperature in degrees Celsius. Using the Kelvin values gives a ratio of approximately 1.071.07.

  3. Step 3

    K2=2K1 means doubling the Celsius temperature  ⟹  t2=2×20.0∘C=40.0∘CK_2 = 2K_1\text{ means doubling the Celsius temperature} \implies t_2 = 2 \times 20.0^\circ\text{C} = 40.0^\circ\text{C}

    Correct

    Tnew=2T1=2(293.15 K)=586.3 K  ⟹  tnew=586.3−273.15≈313∘CT_\text{new} = 2T_1 = 2(293.15\text{ K}) = 586.3\text{ K} \implies t_\text{new} = 586.3 - 273.15 \approx 313^\circ\text{C}

    Doubling the kinetic energy requires doubling the absolute temperature in kelvins (Tnew=2×293.2 K=586.4 KT_\text{new} = 2 \times 293.2\text{ K} = 586.4\text{ K}), which corresponds to 313∘C313^\circ\text{C}.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly applied the conversion formula from degrees Celsius to kelvins.

You recognized that average kinetic energy is proportional to temperature, though on the wrong scale.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Celsius vs. Kelvin Scale Proportionality Error

You converted the temperatures to kelvins in part (a), but then switched back to degrees Celsius when setting up your proportionality equations in parts (b) and (c).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating degrees Celsius as an absolute ratio scale rather than an interval scale with an arbitrary zero point. Because 0∘C≠0 K0^\circ\text{C} \neq 0\text{ K}, proportional relationships (y∝Ty \propto T) and temperature ratios are valid only when temperature is expressed in kelvins.

REASONING PATH
Your ACEpath teacher’s suggested approach
Proportionality Requires an Absolute Zero
  • In thermodynamic equations involving TT directly (such as K‾=32kBT\overline{K} = \frac{3}{2}k_\text{B}T or PV=nRTPV = nRT), TT must be in kelvins.

  • Always convert Celsius temperatures to kelvins before forming any ratio or product.

Scaling Absolute Temperature
  • To scale thermal energy by a factor of nn, multiply the absolute temperature TT by nn, then convert back to Celsius if requested.

  • Calculate Tfinal=n⋅TinitialT_\text{final} = n \cdot T_\text{initial} in kelvins first, then find tfinal=Tfinal−273.15t_\text{final} = T_\text{final} - 273.15.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Set up the ratio of average kinetic energies: K‾2K‾1=32kBT232kBT1=T2T1\frac{\overline{K}_2}{\overline{K}_1} = \frac{\frac{3}{2}k_\text{B}T_2}{\frac{3}{2}k_\text{B}T_1} = \frac{T_2}{T_1}

  2. Substitute the absolute temperatures from part (a): K‾2K‾1=313.2 K293.2 K≈1.07\frac{\overline{K}_2}{\overline{K}_1} = \frac{313.2\text{ K}}{293.2\text{ K}} \approx 1.07

  3. To double the kinetic energy, set Tnew=2T1=2(293.15 K)=586.3 KT_\text{new} = 2T_1 = 2(293.15\text{ K}) = 586.3\text{ K}

  4. Convert TnewT_\text{new} back to Celsius: tnew=586.3 K−273.15≈313∘Ct_\text{new} = 586.3\text{ K} - 273.15 \approx 313^\circ\text{C}

Final answer

(a) 293 K293\text{ K}, 313 K313\text{ K}; (b) 1.071.07; (c) 313∘C313^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review why ratio-based physics formulas (like kinetic theory and ideal gas laws) require an absolute scale where zero means zero thermal motion.

  • Practice identifying whether a problem requires an absolute temperature (TT) or simply a temperature change (ΔT\Delta T, where 1∘C=1 K1^\circ\text{C} = 1\text{ K}).

OverviewACEpath Teacher's Diagnosis

02 The student finds the correct doubled temperature in kelvins but forgets to convert back to degrees Celsius as requested.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    T1=20.0+273.15=293 K  ⟹  T2=40.0+273.15=313 KT_1 = 20.0 + 273.15 = 293\text{ K} \implies T_2 = 40.0 + 273.15 = 313\text{ K}

  2. Step 2

    K‾2/K‾1=313 K293 K=1.07\overline{K}_2 / \overline{K}_1 = \frac{313\text{ K}}{293\text{ K}} = 1.07

  3. Step 3

    T2=2×293.15 K=586 KT_2 = 2 \times 293.15\text{ K} = 586\text{ K}

  4. Step 4

    t2=586 Kt_2 = 586\text{ K}

    Correct

    t2=586.3 K−273.15=313.15∘C≈313∘Ct_2 = 586.3\text{ K} - 273.15 = 313.15^\circ\text{C} \approx 313^\circ\text{C}

    You reported the doubled temperature in kelvins without converting it back to degrees Celsius (∘C^\circ\text{C}).

WHAT YOU DID WELL
Compliments from Your Teacher

You used the absolute Kelvin scale for all kinetic energy proportionality calculations.

You correctly calculated the ratio of average kinetic energies between 20.0∘C20.0^\circ\text{C} and 40.0∘C40.0^\circ\text{C}.

You correctly doubled the absolute temperature in kelvins to find the target thermodynamic state.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of final unit conversion

You found the correct target temperature on the Kelvin scale (586 K586\text{ K}), but wrote it directly as the Celsius temperature t2t_2 without subtracting 273.15273.15.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

In thermodynamic problem-solving, equations require absolute temperatures in kelvins. When the question asks for a final answer in degrees Celsius, an explicit final step subtracting 273.15273.15 is necessary.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting back to Celsius
  • t (∘C)=T (K)−273.15t\,(^\circ\text{C}) = T\,(\text{K}) - 273.15

  • Always verify whether the problem prompts for kelvins or degrees Celsius, and subtract 273.15273.15 whenever degrees Celsius are requested.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Subtract 273.15273.15 to convert kelvins to degrees Celsius: t=586.3 K−273.15=313.15∘Ct = 586.3\text{ K} - 273.15 = 313.15^\circ\text{C}.

  2. Round to three significant figures to match the problem data: 313∘C313^\circ\text{C}.

Final answer

313∘C313^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read the final sentence of each question part to confirm the required unit (∘C^\circ\text{C} vs K\text{K}).

  • Practice two-way temperature conversions: add 273.15273.15 to enter thermodynamic formulas, and subtract 273.15273.15 to return to Celsius.

OverviewACEpath Teacher's Diagnosis

03 The student subtracts the temperature conversion constant instead of adding it when converting from Celsius to Kelvin.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    T1=20.0−273.15=−253 K  ⟹  T2=40.0−273.15=−233 KT_1 = 20.0 - 273.15 = -253\text{ K} \implies T_2 = 40.0 - 273.15 = -233\text{ K}

    Correct

    T1=20.0+273.15≈293 KT_1 = 20.0 + 273.15 \approx 293\text{ K}, T2=40.0+273.15≈313 KT_2 = 40.0 + 273.15 \approx 313\text{ K}

    You subtracted 273.15273.15 rather than adding it. The conversion to the absolute scale is T=t+273.15T = t + 273.15, meaning temperatures above freezing must be positive kelvin values.

  2. Step 2

    K2K1=−233 K−253 K  ⟹  K2K1=0.921\frac{K_2}{K_1} = \frac{-233\text{ K}}{-253\text{ K}} \implies \frac{K_2}{K_1} = 0.921

    Correct

    K‾2K‾1=T2T1=313.2 K293.2 K≈1.07\frac{\overline{K}_2}{\overline{K}_1} = \frac{T_2}{T_1} = \frac{313.2\text{ K}}{293.2\text{ K}} \approx 1.07

    You correctly set the ratio of average kinetic energies equal to the ratio of absolute temperatures, but substituting your negative kelvin values from part (a) led to a ratio less than 11.

  3. Step 3

    T2=2×(−253.15 K)=−506.3 K  ⟹  t2=−506.3+273.15=−233∘CT_2 = 2 \times (-253.15\text{ K}) = -506.3\text{ K} \implies t_2 = -506.3 + 273.15 = -233^\circ\text{C}

    Correct

    Tnew=2×293.15 K=586.3 K  ⟹  tnew=586.3−273.15≈313∘CT_\text{new} = 2 \times 293.15\text{ K} = 586.3\text{ K} \implies t_\text{new} = 586.3 - 273.15 \approx 313^\circ\text{C}

    You correctly doubled the initial absolute temperature to double the kinetic energy, but using the incorrect initial kelvin value caused an incorrect final temperature.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that average translational kinetic energy is directly proportional to absolute temperature.

You understood that genuinely doubling the kinetic energy requires doubling the absolute temperature.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Reversed temperature conversion sign

You reversed the sign in the conversion formula by writing T=t−273.15T = t - 273.15 instead of T=t+273.15T = t + 273.15.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the direction of conversion between Celsius and Kelvin, overlooking that absolute zero (0 K0\text{ K}) corresponds to −273.15∘C-273.15^\circ\text{C}, which makes Kelvin readings numerically larger than Celsius readings for any given temperature.

REASONING PATH
Your ACEpath teacher’s suggested approach
Kelvin is Always Non-Negative
  • Absolute temperature TT in kelvins cannot be negative (T≥0 KT \ge 0\text{ K}).

  • If your Kelvin calculation yields a negative value, immediately check whether you subtracted instead of adding 273.15273.15.

Conversion Offset Anchor
  • 0∘C=273.15 K0^\circ\text{C} = 273.15\text{ K}. Therefore, T(K)=t(∘C)+273.15T(\text{K}) = t(^\circ\text{C}) + 273.15.

  • Always add 273.15273.15 when going from ∘C^\circ\text{C} to K\text{K}, and subtract 273.15273.15 when converting from K\text{K} back to ∘C^\circ\text{C}.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert temperatures: T1=20.0+273.15=293.15 K≈293 KT_1 = 20.0 + 273.15 = 293.15\text{ K} \approx 293\text{ K}, T2=40.0+273.15=313.15 K≈313 KT_2 = 40.0 + 273.15 = 313.15\text{ K} \approx 313\text{ K}.

  2. Compute ratio of kinetic energies: K‾2K‾1=T2T1=313.15293.15≈1.07\frac{\overline{K}_2}{\overline{K}_1} = \frac{T_2}{T_1} = \frac{313.15}{293.15} \approx 1.07.

  3. Determine the doubled absolute temperature: Tnew=2×293.15 K=586.3 KT_\text{new} = 2 \times 293.15\text{ K} = 586.3\text{ K}.

  4. Convert back to Celsius: tnew=586.3−273.15≈313∘Ct_\text{new} = 586.3 - 273.15 \approx 313^\circ\text{C}.

Final answer

(a) T1=293 KT_1 = 293\text{ K}, T2=313 KT_2 = 313\text{ K}; (b) K‾2K‾1=1.07\frac{\overline{K}_2}{\overline{K}_1} = 1.07; (c) 313∘C313^\circ\text{C}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the anchor points: absolute zero is 0 K=−273.15∘C0\text{ K} = -273.15^\circ\text{C} and water freezes at 273.15 K=0∘C273.15\text{ K} = 0^\circ\text{C}.

  • Double-check that any thermodynamic equation involving TT uses positive values in kelvins.

  • Practice converting temperatures both ways (∘C↔K^\circ\text{C} \leftrightarrow \text{K}) before evaluating gas law ratios.

Lock it in

Similar question

01

A container of helium gas is heated from 27.0∘C27.0^\circ\text{C} to 127.0∘C127.0^\circ\text{C}. Calculate the ratio of the final root-mean-square speed of the helium atoms to their initial root-mean-square speed (vrms,2/vrms,1v_\text{rms,2} / v_\text{rms,1}).

Answer

vrms,2vrms,1≈1.15\frac{v_\text{rms,2}}{v_\text{rms,1}} \approx 1.15. Convert temperatures to kelvins: T1=27.0+273.15=300.15 KT_1 = 27.0 + 273.15 = 300.15\text{ K} and T2=127.0+273.15=400.15 KT_2 = 127.0 + 273.15 = 400.15\text{ K}. Since vrms=3kBTmv_\text{rms} = \sqrt{\frac{3k_\text{B}T}{m}}, the speed ratio is T2T1=400.15300.15=1.333≈1.15\sqrt{\frac{T_2}{T_1}} = \sqrt{\frac{400.15}{300.15}} = \sqrt{1.333} \approx 1.15.

02

A sample of argon gas is initially at 0.0∘C0.0^\circ\text{C}. To what temperature in degrees Celsius must the gas be heated so that the average translational kinetic energy of the atoms triples?

Answer

546∘C546^\circ\text{C}. Initial temperature in kelvins is T1=0.0+273.15=273.15 KT_1 = 0.0 + 273.15 = 273.15\text{ K}. Tripling kinetic energy triples absolute temperature: T2=3×273.15 K=819.45 KT_2 = 3 \times 273.15\text{ K} = 819.45\text{ K}. Convert back to Celsius: t2=819.45−273.15=546.3∘C≈546∘Ct_2 = 819.45 - 273.15 = 546.3^\circ\text{C} \approx 546^\circ\text{C}.

03

An ideal gas at 25.0∘C25.0^\circ\text{C} expands isothermally and then undergoes an isobaric process that reduces its average molecular kinetic energy by 20.0%20.0\%. Determine its final temperature in degrees Celsius.

Answer

−34.6∘C-34.6^\circ\text{C}. Initial temperature in kelvins is T1=25.0+273.15=298.15 KT_1 = 25.0 + 273.15 = 298.15\text{ K}. A 20.0%20.0\% reduction in kinetic energy means K‾2=0.800K‾1\overline{K}_2 = 0.800\overline{K}_1, so T2=0.800T1=0.800×298.15 K=238.52 KT_2 = 0.800 T_1 = 0.800 \times 298.15\text{ K} = 238.52\text{ K}. Convert to Celsius: t2=238.52−273.15=−34.63∘C≈−34.6∘Ct_2 = 238.52 - 273.15 = -34.63^\circ\text{C} \approx -34.6^\circ\text{C}.

Loading workspace…