Resources

During the compression stroke of a miniature pneumatic mechanism, an ideal gas is compressed from an initial volume of V1=850 cm3V_1 = 850\text{ cm}^3 to a final volume of V2=350 cm3V_2 = 350\text{ cm}^3 under a constant pressure of P=2.40 barP = 2.40\text{ bar}. Throughout the compression, 45.0 cal45.0\text{ cal} of heat is conducted away from the gas into a surrounding fluid jacket. Using the conversion factors 1 bar=1.00×105 Pa1\text{ bar} = 1.00 \times 10^5\text{ Pa}, 1 cm3=1.00×10−6 m31\text{ cm}^3 = 1.00 \times 10^{-6}\text{ m}^3, and 1 cal=4.184 J1\text{ cal} = 4.184\text{ J}, calculate: (a) the work done by the gas WW in joules, (b) the heat transferred QQ in joules with its appropriate sign, and (c) the net change in internal energy ΔU\Delta U of the gas in joules.

Answer and steps

Final answer

(a) W=−120 JW = -120\text{ J}; (b) Q=−188 JQ = -188\text{ J}; (c) ΔU=−68.3 J\Delta U = -68.3\text{ J}.

Steps

01

Convert all given quantities to SI units

Convert pressure PP, initial volume V1V_1, final volume V2V_2, and heat magnitude into standard SI units (Pa\text{Pa}, m3\text{m}^3, and J\text{J}):

  • Pressure: P=2.40 bar=2.40×105 PaP = 2.40\text{ bar} = 2.40 \times 10^5\text{ Pa}
  • Initial volume: V1=850 cm3=850×10−6 m3=8.50×10−4 m3V_1 = 850\text{ cm}^3 = 850 \times 10^{-6}\text{ m}^3 = 8.50 \times 10^{-4}\text{ m}^3
  • Final volume: V2=350 cm3=350×10−6 m3=3.50×10−4 m3V_2 = 350\text{ cm}^3 = 350 \times 10^{-6}\text{ m}^3 = 3.50 \times 10^{-4}\text{ m}^3
  • Change in volume: ΔV=V2−V1=(350−850)×10−6 m3=−5.00×10−4 m3\Delta V = V_2 - V_1 = (350 - 850) \times 10^{-6}\text{ m}^3 = -5.00 \times 10^{-4}\text{ m}^3

02

Calculate the work done by the gas (WW)

For an isobaric (constant pressure) process, the work done by the gas is given by:

W=PΔV=P(V2−V1)W = P\Delta V = P(V_2 - V_1)

Substitute the values:

W=(2.40×105 Pa)⋅(−5.00×10−4 m3)=−120 JW = (2.40 \times 10^5\text{ Pa}) \cdot (-5.00 \times 10^{-4}\text{ m}^3) = -120\text{ J}

Sign convention note: Work done by the gas is negative because the gas is compressed (ΔV<0\Delta V < 0). This means work is done on the gas by the surroundings.


03

Determine the heat transferred (QQ)

The problem states that heat is conducted away from the gas into the surroundings. By thermodynamic sign convention, heat leaving the system is negative:

Q=−45.0 calQ = -45.0\text{ cal}

Convert calories to joules using 1 cal=4.184 J1\text{ cal} = 4.184\text{ J}:

Q=−45.0⋅4.184 J=−188.28 J≈−188 JQ = -45.0 \cdot 4.184\text{ J} = -188.28\text{ J} \approx -188\text{ J}


04

Calculate the change in internal energy (ΔU\Delta U)

Apply the First Law of Thermodynamics:

ΔU=Q−W\Delta U = Q - W

Substitute the calculated values of QQ and WW:

ΔU=−188.28 J−(−120 J)=−188.28 J+120 J=−68.28 J≈−68.3 J\Delta U = -188.28\text{ J} - (-120\text{ J}) = -188.28\text{ J} + 120\text{ J} = -68.28\text{ J} \approx -68.3\text{ J}

The negative sign indicates that the internal energy of the gas decreases by 68.3 J68.3\text{ J} during the compression.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 A student inverts the sign of work by defining volume change as initial minus final volume, resulting in positive work done by the gas during compression.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=2.40×105 Pa  ⟹  ΔV=850 cm3−350 cm3=500×10−6 m3  ⟹  W=PΔV=(2.40×105 Pa)(500×10−6 m3)=120 JP = 2.40 \times 10^5\text{ Pa} \implies \Delta V = 850\text{ cm}^3 - 350\text{ cm}^3 = 500 \times 10^{-6}\text{ m}^3 \implies W = P\Delta V = (2.40 \times 10^5\text{ Pa})(500 \times 10^{-6}\text{ m}^3) = 120\text{ J}

    Correct

    ΔV=V2−V1=350 cm3−850 cm3=−500×10−6 m3  ⟹  W=PΔV=(2.40×105 Pa)(−500×10−6 m3)=−120 J\Delta V = V_2 - V_1 = 350\text{ cm}^3 - 850\text{ cm}^3 = -500 \times 10^{-6}\text{ m}^3 \implies W = P\Delta V = (2.40 \times 10^5\text{ Pa})(-500 \times 10^{-6}\text{ m}^3) = -120\text{ J}

    In thermodynamics, any change Δ\Delta is strictly defined as final state minus initial state: ΔV=V2−V1\Delta V = V_2 - V_1. Because the gas is compressed from 850 cm3850\text{ cm}^3 down to 350 cm3350\text{ cm}^3, ΔV=−500×10−6 m3\Delta V = -500 \times 10^{-6}\text{ m}^3, which makes the work done by the gas negative (W=−120 JW = -120\text{ J}).

  2. Step 2

    Q=−45.0 cal×4.184 J/cal=−188.28 JQ = -45.0\text{ cal} \times 4.184\text{ J/cal} = -188.28\text{ J}

  3. Step 3

    ΔU=Q−W  ⟹  ΔU=−188.28 J−120 J=−308.28 J\Delta U = Q - W \implies \Delta U = -188.28\text{ J} - 120\text{ J} = -308.28\text{ J}

    Correct

    ΔU=Q−W=−188.28 J−(−120 J)=−68.28 J≈−68.3 J\Delta U = Q - W = -188.28\text{ J} - (-120\text{ J}) = -68.28\text{ J} \approx -68.3\text{ J}

    You chose the correct formulation of the First Law (ΔU=Q−W\Delta U = Q - W), but substituting your positive work value W=120 JW = 120\text{ J} propagated the previous sign error into your value for ΔU\Delta U.

WHAT YOU DID WELL
Compliments from Your Teacher

You converted pressure from bars to pascals without error.

You correctly recognized that heat conducted away from the system carries a negative sign.

You accurately converted calories to joules using the given conversion factor.

You correctly recalled the First Law of Thermodynamics as ΔU=Q−W\Delta U = Q - W.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention error in volume change

You subtracted the final volume from the initial volume to get a positive magnitude instead of computing ΔV=Vfinal−Vinitial\Delta V = V_{\text{final}} - V_{\text{initial}}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the physical magnitude of volume reduction with the signed thermodynamic state change ΔV=V2−V1\Delta V = V_2 - V_1. Compression always means ΔV<0\Delta V < 0, which requires the work done by the gas to be negative (W<0W < 0).

REASONING PATH
Your ACEpath teacher’s suggested approach
State-change definition
  • Every change in physics is defined as final minus initial: ΔX=Xfinal−Xinitial\Delta X = X_{\text{final}} - X_{\text{initial}}.

  • Always write down ΔV=V2−V1\Delta V = V_2 - V_1 before substituting numerical values.

Thermodynamic work sign check
  • For work done by a gas (W=PΔVW = P\Delta V), expansion means W>0W > 0 and compression means W<0W < 0.

  • Perform a physical sense-check: when a gas is being compressed, the surroundings do work on the gas, so work done by the gas must be negative.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Substitute the corrected work W=−120 JW = -120\text{ J} and heat Q=−188.28 JQ = -188.28\text{ J} into the First Law: ΔU=Q−W\Delta U = Q - W.

  2. Evaluate the signs carefully: ΔU=−188.28 J−(−120 J)=−188.28 J+120 J=−68.28 J≈−68.3 J\Delta U = -188.28\text{ J} - (-120\text{ J}) = -188.28\text{ J} + 120\text{ J} = -68.28\text{ J} \approx -68.3\text{ J}.

Final answer

(a) W=−120 JW = -120\text{ J}; (b) Q=−188 JQ = -188\text{ J}; (c) ΔU=−68.3 J\Delta U = -68.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the universal definition ΔV=Vfinal−Vinitial\Delta V = V_{\text{final}} - V_{\text{initial}} so that the sign of ΔV\Delta V is preserved naturally.

  • Check each sign against physical intuition: compression requires work on the gas, so Wby gasW_{\text{by gas}} must be negative.

  • Watch out for double negatives when subtracting a negative work term in ΔU=Q−W\Delta U = Q - W.

OverviewACEpath Teacher's Diagnosis

02 A student assigns a positive sign to heat because the quantity is stated without a sign, failing to account for heat being removed from the system.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P=2.40×105 Pa  ⟹  ΔV=(350−850)×10−6 m3=−500×10−6 m3  ⟹  W=PΔV=(2.40×105 Pa)(−500×10−6 m3)=−120 JP = 2.40 \times 10^5\text{ Pa} \implies \Delta V = (350 - 850) \times 10^{-6}\text{ m}^3 = -500 \times 10^{-6}\text{ m}^3 \implies W = P\Delta V = (2.40 \times 10^5\text{ Pa})(-500 \times 10^{-6}\text{ m}^3) = -120\text{ J}

  2. Step 2

    Q=45.0 cal×4.184 J/cal=+188.28 JQ = 45.0\text{ cal} \times 4.184\text{ J/cal} = +188.28\text{ J}

    Correct

    Q=−45.0 cal×4.184 J/cal=−188.28 J≈−188 JQ = -45.0\text{ cal} \times 4.184\text{ J/cal} = -188.28\text{ J} \approx -188\text{ J}

    Because heat is conducted away from the gas into the surrounding jacket, the heat transfer must be negative (Q<0Q < 0).

  3. Step 3

    ΔU=Q−W=188.28 J−(−120 J)=308.28 J\Delta U = Q - W = 188.28\text{ J} - (-120\text{ J}) = 308.28\text{ J}

    Correct

    ΔU=Q−W=−188.28 J−(−120 J)=−68.28 J≈−68.3 J\Delta U = Q - W = -188.28\text{ J} - (-120\text{ J}) = -68.28\text{ J} \approx -68.3\text{ J}

    Your formula for the First Law of Thermodynamics is correct, but substituting positive QQ led to an incorrect result for ΔU\Delta U.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted pressure and volume to standard SI units.

You calculated the work done by the gas with the correct negative sign for compression.

You stated the correct form of the First Law of Thermodynamics, ΔU=Q−W\Delta U = Q - W.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Sign convention for heat transfer

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated heat as a positive quantity because it was given as a magnitude of 45.0 cal45.0\text{ cal}, overlooking the phrase 'conducted away from the gas', which requires Q<0Q < 0 in thermodynamic sign conventions.

REASONING PATH
Your ACEpath teacher’s suggested approach
Heat Flow Sign Convention
  • Heat added to the system is positive (Q>0Q > 0); heat released or removed from the system is negative (Q<0Q < 0).

  • Before calculating, identify whether heat enters or leaves the system and assign the positive or negative sign explicitly.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Account for heat leaving the gas: Q=−45.0 cal×4.184 J/cal=−188.28 JQ = -45.0\text{ cal} \times 4.184\text{ J/cal} = -188.28\text{ J}

  2. Apply the First Law of Thermodynamics: ΔU=Q−W=−188.28 J−(−120 J)=−68.28 J\Delta U = Q - W = -188.28\text{ J} - (-120\text{ J}) = -68.28\text{ J}

Final answer

(a) W=−120 JW = -120\text{ J}; (b) Q=−188 JQ = -188\text{ J}; (c) ΔU=−68.3 J\Delta U = -68.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always circle directional keywords like 'conducted away', 'released', 'absorbed', or 'compressed' when reading thermodynamic problems.

  • Write down explicit signs for QQ and WW alongside their physical definitions before substituting them into ΔU=Q−W\Delta U = Q - W.

OverviewACEpath Teacher's Diagnosis

03 A student misapplies the first law of thermodynamics as ΔU = Q + W while using work done by the gas W, leading to an incorrect sum.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    P = 2.40 ×\times 10^5 Pa\text{ Pa}   ⟹  \implies Δ\Delta V = (350 - 850) ×\times 10^{-6} m\text{ m}^3 = -500 ×\times 10^{-6} m\text{ m}^3   ⟹  \implies W = PΔ\Delta V = (2.40 ×\times 10^5 Pa\text{ Pa})(-500 ×\times 10^{-6} m\text{ m}^3) = -120 J\text{ J}

  2. Step 2

    Q = -45.0 cal\text{ cal} ×\times 4.184 J/cal\text{ J/cal} = -188.28 J\text{ J}

  3. Step 3

    Δ\Delta U = Q + W   ⟹  \implies Δ\Delta U = -188.28 J\text{ J} + (-120 J\text{ J}) = -308.28 J\text{ J}

    Correct

    Δ\Delta U = Q - W = -188.28 J\text{ J} - (-120 J\text{ J}) = -68.28 J\text{ J} ≈\approx -68.3 J\text{ J}

    When WW is defined as work done by the gas (W=PΔVW = P\Delta V), the First Law of Thermodynamics is ΔU=Q−W\Delta U = Q - W. Using ΔU=Q+W\Delta U = Q + W applies only if WW represents work done on the gas (Won=−PΔV=+120 JW_{\text{on}} = -P\Delta V = +120\text{ J}).

WHAT YOU DID WELL
Compliments from Your Teacher

You converted all given values accurately into SI units.

You correctly identified the negative sign for work done by the gas during compression.

You assigned the correct negative sign to heat released by the system.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Formula sign convention mismatch

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You combined the formula form ΔU=Q+W\Delta U = Q + W (which requires WW to be work done on the system) with your calculated W=PΔV=−120 JW = P\Delta V = -120\text{ J} (which is work done by the system).

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Work Convention
  • If W=∫P dVW = \int P\,dV (work done BY the gas), the First Law is ΔU=Q−W\Delta U = Q - W. If WW is defined as work done ON the gas, ΔU=Q+Won\Delta U = Q + W_{\text{on}}.

  • Always verify whether your chosen First Law formula defines WW as work done by the system or work done on the system before substituting.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. State the First Law for work done by the gas: ΔU=Q−W\Delta U = Q - W

  2. Substitute Q=−188.28 JQ = -188.28\text{ J} and W=−120 JW = -120\text{ J}: ΔU=−188.28 J−(−120 J)\Delta U = -188.28\text{ J} - (-120\text{ J})

  3. Simplify: ΔU=−188.28 J+120 J=−68.28 J≈−68.3 J\Delta U = -188.28\text{ J} + 120\text{ J} = -68.28\text{ J} \approx -68.3\text{ J}

Final answer

(a) W=−120 JW = -120\text{ J}; (b) Q=−188 JQ = -188\text{ J}; (c) ΔU=−68.3 J\Delta U = -68.3\text{ J}

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the two common standard conventions for the First Law of Thermodynamics (physics convention ΔU=Q−W\Delta U = Q - W vs. chemistry convention ΔU=Q+Won\Delta U = Q + W_{\text{on}}).

  • Practice identifying whether calculated work represents work done by or work done on the gas before plugging it into ΔU\Delta U.

Lock it in

Similar question

01

A piston compresses a sample of neon gas at a constant pressure of 1.50×105 Pa1.50 \times 10^5\text{ Pa} from an initial volume of 600 cm3600\text{ cm}^3 to a final volume of 200 cm3200\text{ cm}^3. Calculate the work WW done by the gas.

Answer

W=−60.0 JW = -60.0\text{ J}. Key steps: ΔV=V2−V1=(200−600)×10−6 m3=−4.00×10−4 m3\Delta V = V_2 - V_1 = (200 - 600) \times 10^{-6}\text{ m}^3 = -4.00 \times 10^{-4}\text{ m}^3. Then W=PΔV=(1.50×105 Pa)(−4.00×10−4 m3)=−60.0 JW = P\Delta V = (1.50 \times 10^5\text{ Pa})(-4.00 \times 10^{-4}\text{ m}^3) = -60.0\text{ J}.

02

During an isobaric compression at 3.00×105 Pa3.00 \times 10^5\text{ Pa}, the volume of an ideal gas changes from 1.20×10−3 m31.20 \times 10^{-3}\text{ m}^3 to 0.70×10−3 m30.70 \times 10^{-3}\text{ m}^3, and 210 J210\text{ J} of heat is transferred out of the gas. Find (a) the work done by the gas and (b) the change in internal energy ΔU\Delta U.

Answer

(a) W=−150 JW = -150\text{ J}; (b) ΔU=−60 J\Delta U = -60\text{ J}. Key steps: ΔV=0.70×10−3−1.20×10−3=−0.50×10−3 m3\Delta V = 0.70 \times 10^{-3} - 1.20 \times 10^{-3} = -0.50 \times 10^{-3}\text{ m}^3, so W=PΔV=−150 JW = P\Delta V = -150\text{ J}. Heat leaves the system, so Q=−210 JQ = -210\text{ J}. By the First Law: ΔU=Q−W=−210 J−(−150 J)=−60 J\Delta U = Q - W = -210\text{ J} - (-150\text{ J}) = -60\text{ J}.

03

A gas expands from 2.0 L2.0\text{ L} to 5.0 L5.0\text{ L} at a constant pressure of 2.0×105 Pa2.0 \times 10^5\text{ Pa} while absorbing 850 J850\text{ J} of heat. Then, it is compressed back from 5.0 L5.0\text{ L} to 2.0 L2.0\text{ L} at a constant pressure of 1.0×105 Pa1.0 \times 10^5\text{ Pa} while releasing 400 J400\text{ J} of heat. Determine the net change in internal energy ΔUnet\Delta U_{\text{net}} over this two-step process.

Answer

ΔUnet=−150 J\Delta U_{\text{net}} = -150\text{ J}. Key steps: Step 1 (expansion): W1=(2.0×105)(3.0×10−3)=+600 JW_1 = (2.0 \times 10^5)(3.0 \times 10^{-3}) = +600\text{ J}, Q1=+850 JQ_1 = +850\text{ J}, so ΔU1=850−600=+250 J\Delta U_1 = 850 - 600 = +250\text{ J}. Step 2 (compression): W2=(1.0×105)(−3.0×10−3)=−300 JW_2 = (1.0 \times 10^5)(-3.0 \times 10^{-3}) = -300\text{ J}, Q2=−400 JQ_2 = -400\text{ J}, so ΔU2=−400−(−300)=−100 J\Delta U_2 = -400 - (-300) = -100\text{ J} (or for net work Wnet=300 JW_{\text{net}} = 300\text{ J} and Qnet=450 JQ_{\text{net}} = 450\text{ J}, giving ΔUnet=450−300=+150 J\Delta U_{\text{net}} = 450 - 300 = +150\text{ J}). Note: verifying initial to final state return: ΔUnet=ΔU1+ΔU2=250 J+(−100 J)=+150 J\Delta U_{\text{net}} = \Delta U_1 + \Delta U_2 = 250\text{ J} + (-100\text{ J}) = +150\text{ J}.

Loading workspace…