Resources

In a university physics laboratory, students use an ultrasonic motion sensor and a digital photogate array to track a low-friction dynamic cart moving along a graduated linear track. The sensor's ultrasonic emitter is positioned at the track origin x=0.000 mx = 0.000\text{ m}. At time t0=0.000 st_0 = 0.000\text{ s}, the cart is released from rest at x0=0.200 mx_0 = 0.200\text{ m} and is propelled down the positive track by a hanging mass. Photogate 1 records the cart passing position x1=0.800 mx_1 = 0.800\text{ m} at timestamp t1=1.200 st_1 = 1.200\text{ s}. At the end of the track, the cart collides with an elastic bumper at position x2=1.400 mx_2 = 1.400\text{ m} at timestamp t2=1.800 st_2 = 1.800\text{ s}, rebounds, and passes Photogate 1 again on its return trajectory at position x3=0.800 mx_3 = 0.800\text{ m} at timestamp t3=2.600 st_3 = 2.600\text{ s}. For the experimental run from t0=0.000 st_0 = 0.000\text{ s} to t3=2.600 st_3 = 2.600\text{ s}: (a) calculate the cart's average velocity, and (b) calculate the cart's average speed.

Answer and steps

Final answer

(a) Average velocity = +0.231 m/s+0.231\text{ m/s}; (b) Average speed = 0.692 m/s0.692\text{ m/s}

Steps

01

Identify the Time Interval and Key Coordinates

The total elapsed time Δt\Delta t for the motion from t0t_0 to t3t_3 is: Δt=t3−t0=2.600 s−0.000 s=2.600 s\Delta t = t_3 - t_0 = 2.600\text{ s} - 0.000\text{ s} = 2.600\text{ s}

The cart's motion along the xx-axis occurs in two phases:

  • Forward trip: Starts at x0=0.200 mx_0 = 0.200\text{ m} and travels to the bumper at x2=1.400 mx_2 = 1.400\text{ m}.
  • Return trip: Rebounds at x2=1.400 mx_2 = 1.400\text{ m} and travels backward to Photogate 1 at x3=0.800 mx_3 = 0.800\text{ m}.

02

Calculate Average Velocity

Average velocity depends strictly on the net displacement Δx\Delta x between the initial position and the final position, regardless of the path taken between them: Δx=xfinal−xinitial=x3−x0\Delta x = x_{\text{final}} - x_{\text{initial}} = x_3 - x_0 Δx=0.800 m−0.200 m=+0.600 m\Delta x = 0.800\text{ m} - 0.200\text{ m} = +0.600\text{ m}

Using the definition of average velocity: vavg=ΔxΔt=+0.600 m2.600 s≈+0.231 m/sv_{\text{avg}} = \frac{\Delta x}{\Delta t} = \frac{+0.600\text{ m}}{2.600\text{ s}} \approx +0.231\text{ m/s}

Common Pitfall: Intermediate positions (such as x1x_1 or the turning point x2x_2) do not alter the net displacement. Do not add intermediate path lengths when finding displacement.


03

Calculate Average Speed

Average speed is a scalar quantity defined as the total distance traveled dd divided by the total elapsed time Δt\Delta t. Distance is the actual length of the path traversed:

  • Distance traveled moving forward to the bumper: d1=∣x2−x0∣=∣1.400 m−0.200 m∣=1.200 md_1 = |x_2 - x_0| = |1.400\text{ m} - 0.200\text{ m}| = 1.200\text{ m}
  • Distance traveled on the rebound: d2=∣x3−x2∣=∣0.800 m−1.400 m∣=0.600 md_2 = |x_3 - x_2| = |0.800\text{ m} - 1.400\text{ m}| = 0.600\text{ m}
  • Total distance traveled: d=d1+d2=1.200 m+0.600 m=1.800 md = d_1 + d_2 = 1.200\text{ m} + 0.600\text{ m} = 1.800\text{ m}

Using the definition of average speed: savg=dΔt=1.800 m2.600 s≈0.692 m/ss_{\text{avg}} = \frac{d}{\Delta t} = \frac{1.800\text{ m}}{2.600\text{ s}} \approx 0.692\text{ m/s}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses average speed with average velocity, using the net displacement magnitude instead of the total distance traveled.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx=x3−x0=0.800−0.200=0.600 m  ⟹  Δt=2.600−0.000=2.600 s  ⟹  vavg=0.600/2.600≈0.231 m/s\Delta x = x_3 - x_0 = 0.800 - 0.200 = 0.600\text{ m} \implies \Delta t = 2.600 - 0.000 = 2.600\text{ s} \implies v_{\text{avg}} = 0.600 / 2.600 \approx 0.231\text{ m/s}

  2. Step 2

    distance=∣x3−x0∣=0.600 m\text{distance} = |x_3 - x_0| = 0.600\text{ m}

    Correct

    d=∣x2−x0∣+∣x3−x2∣=∣1.400−0.200∣+∣0.800−1.400∣=1.800 md = |x_2 - x_0| + |x_3 - x_2| = |1.400 - 0.200| + |0.800 - 1.400| = 1.800\text{ m}

    You evaluated distance as the magnitude of net displacement ∣x3−x0∣|x_3 - x_0|. Because the cart reversed direction at the bumper x2=1.400 mx_2 = 1.400\text{ m}, total distance must sum each segment's path length: forward 1.200 m1.200\text{ m} plus backward 0.600 m0.600\text{ m}.

  3. Step 3

    savg=distance/Δt  ⟹  savg=0.600/2.600≈0.231 m/ss_{\text{avg}} = \text{distance} / \Delta t \implies s_{\text{avg}} = 0.600 / 2.600 \approx 0.231\text{ m/s}

    Correct

    savg=dΔt=1.800 m2.600 s≈0.692 m/ss_{\text{avg}} = \frac{d}{\Delta t} = \frac{1.800\text{ m}}{2.600\text{ s}} \approx 0.692\text{ m/s}

    You used the correct definition of average speed as distance over time, but your numerical result was affected by the incorrect distance from the previous step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished that average velocity depends solely on initial and final positions.

You computed the total elapsed time accurately as Δt=2.600 s\Delta t = 2.600\text{ s}.

You correctly set up the formula for average speed as path distance divided by elapsed time.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Distance vs. Displacement Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You treated total distance traveled as identical to the magnitude of net displacement ∣xfinal−xinitial∣|x_{\text{final}} - x_{\text{initial}}|, overlooking that reversing direction accumulates additional path length.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check for Turnaround Points
  • Displacement is vector change in position (Δx=xf−xi\Delta x = x_f - x_i), but distance is scalar path length (d=∑∣Δxk∣d = \sum |\Delta x_k|).

  • Whenever an object reverses direction, break the trajectory into unidirectional segments and add their absolute lengths to find total distance.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify the turning point where the cart rebounds: x2=1.400 mx_2 = 1.400\text{ m}.

  2. Calculate forward distance: d1=∣1.400 m−0.200 m∣=1.200 md_1 = |1.400\text{ m} - 0.200\text{ m}| = 1.200\text{ m}.

  3. Calculate return distance: d2=∣0.800 m−1.400 m∣=0.600 md_2 = |0.800\text{ m} - 1.400\text{ m}| = 0.600\text{ m}.

  4. Sum the segment distances: d=1.200 m+0.600 m=1.800 md = 1.200\text{ m} + 0.600\text{ m} = 1.800\text{ m}.

  5. Compute average speed: savg=1.800 m2.600 s≈0.692 m/ss_{\text{avg}} = \frac{1.800\text{ m}}{2.600\text{ s}} \approx 0.692\text{ m/s}.

Final answer

(a) vavg=+0.231 m/sv_{\text{avg}} = +0.231\text{ m/s}; (b) savg=0.692 m/ss_{\text{avg}} = 0.692\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice sketching 1D motion paths with turnarounds on a number line to visibly distinguish net displacement from total distance.

  • Solve problems where particles change direction multiple times to reinforce segment-by-segment distance summation.

OverviewACEpath Teacher's Diagnosis

02 The student mistakenly measures position coordinates relative to the track origin instead of the cart's initial release point x0.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    Δx=x3−0=0.800 m\Delta x = x_3 - 0 = 0.800\text{ m}

    Correct

    Δx=x3−x0=0.800 m−0.200 m=+0.600 m\Delta x = x_3 - x_0 = 0.800\text{ m} - 0.200\text{ m} = +0.600\text{ m}

    The cart was released from rest at position x0=0.200 mx_0 = 0.200\text{ m}, not at the origin x=0x = 0. Net displacement must be measured from the initial position x0x_0 to the final position x3x_3.

  2. Step 2

    Δt=2.600 s  ⟹  vavg=0.8002.600≈0.308 m/s\Delta t = 2.600\text{ s} \implies v_{\text{avg}} = \frac{0.800}{2.600} \approx 0.308\text{ m/s}

    Correct

    vavg=ΔxΔt=+0.600 m2.600 s≈+0.231 m/sv_{\text{avg}} = \frac{\Delta x}{\Delta t} = \frac{+0.600\text{ m}}{2.600\text{ s}} \approx +0.231\text{ m/s}

    Your formula for average velocity was correct, but your result was affected by the incorrect displacement from Step 1.

  3. Step 3

    d=(1.400−0)+(1.400−0.800)=1.400+0.600=2.000 md = (1.400 - 0) + (1.400 - 0.800) = 1.400 + 0.600 = 2.000\text{ m}

    Correct

    d=∣x2−x0∣+∣x3−x2∣=(1.400−0.200)+(1.400−0.800)=1.200+0.600=1.800 md = |x_2 - x_0| + |x_3 - x_2| = (1.400 - 0.200) + (1.400 - 0.800) = 1.200 + 0.600 = 1.800\text{ m}

    For the forward leg of the trip, the cart traveled from x0=0.200 mx_0 = 0.200\text{ m} to the bumper at x2=1.400 mx_2 = 1.400\text{ m}, which is a distance of 1.200 m1.200\text{ m}, not 1.400 m1.400\text{ m}.

  4. Step 4

    savg=2.0002.600≈0.769 m/ss_{\text{avg}} = \frac{2.000}{2.600} \approx 0.769\text{ m/s}

    Correct

    savg=dΔt=1.800 m2.600 s≈0.692 m/ss_{\text{avg}} = \frac{d}{\Delta t} = \frac{1.800\text{ m}}{2.600\text{ s}} \approx 0.692\text{ m/s}

    Your formula for average speed was applied correctly, but the numerical answer was affected by the extra 0.200 m0.200\text{ m} included in the total distance.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly distinguished between displacement for velocity and total path distance for speed.

You correctly identified the elapsed time Δt=2.600 s\Delta t = 2.600\text{ s}.

You correctly calculated the distance of the rebound leg as 1.400 m−0.800 m=0.600 m1.400\text{ m} - 0.800\text{ m} = 0.600\text{ m}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Initial Reference Position Confusion

Using the origin x=0x = 0 instead of the given initial coordinate x0=0.200 mx_0 = 0.200\text{ m}.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating the coordinate system origin (x=0x = 0) with the starting position of the object (x0=0.200 mx_0 = 0.200\text{ m}). An object's initial position does not automatically coincide with the coordinate origin unless explicitly stated.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Initial and Final Positions
  • Displacement is defined as Δx=xfinal−xinitial\Delta x = x_{\text{final}} - x_{\text{initial}}.

  • Always write down x0x_0 and xfinalx_{\text{final}} explicitly from the problem text before subtracting, rather than assuming xinitial=0x_{\text{initial}} = 0.

Calculate Leg Distances from Actual Endpoints
  • Each segment distance is di=∣xend−xstart∣d_i = |x_{\text{end}} - x_{\text{start}}| for that specific segment.

  • Check that the first segment begins at x0x_0, so d1=∣x2−x0∣d_1 = |x_2 - x_0|.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Δx=x3−x0=0.800 m−0.200 m=+0.600 m\Delta x = x_3 - x_0 = 0.800\text{ m} - 0.200\text{ m} = +0.600\text{ m}

  2. vavg=ΔxΔt=+0.600 m2.600 s≈+0.231 m/sv_{\text{avg}} = \frac{\Delta x}{\Delta t} = \frac{+0.600\text{ m}}{2.600\text{ s}} \approx +0.231\text{ m/s}

  3. d=∣x2−x0∣+∣x3−x2∣=(1.400−0.200)+(1.400−0.800)=1.200 m+0.600 m=1.800 md = |x_2 - x_0| + |x_3 - x_2| = (1.400 - 0.200) + (1.400 - 0.800) = 1.200\text{ m} + 0.600\text{ m} = 1.800\text{ m}

  4. savg=dΔt=1.800 m2.600 s≈0.692 m/ss_{\text{avg}} = \frac{d}{\Delta t} = \frac{1.800\text{ m}}{2.600\text{ s}} \approx 0.692\text{ m/s}

Final answer

(a) Average velocity = +0.231 m/s+0.231\text{ m/s}; (b) Average speed = 0.692 m/s0.692\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Re-read kinematics problem statements carefully to distinguish between the location of sensors/origins and the object's initial coordinate x0x_0.

  • Practice sketching a 1D position line with clearly marked points for x=0x = 0, x0x_0, turning points, and final position before computing displacements or distances.

OverviewACEpath Teacher's Diagnosis

03 The student calculates the average speed by taking the arithmetic mean of the speeds over separate intervals rather than dividing total distance by total time.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    Δx=0.800−0.200=0.600 m  ⟹  Δt=2.600−0.000=2.600 s  ⟹  vavg=0.600/2.600≈0.231 m/s\Delta x = 0.800 - 0.200 = 0.600\text{ m} \implies \Delta t = 2.600 - 0.000 = 2.600\text{ s} \implies v_{\text{avg}} = 0.600 / 2.600 \approx 0.231\text{ m/s}

  2. Step 2

    v1=1.400−0.2001.800−0=1.2001.800≈0.667 m/s  ⟹  v2=1.400−0.8002.600−1.800=0.6000.800=0.750 m/sv_1 = \frac{1.400 - 0.200}{1.800 - 0} = \frac{1.200}{1.800} \approx 0.667\text{ m/s} \implies v_2 = \frac{1.400 - 0.800}{2.600 - 1.800} = \frac{0.600}{0.800} = 0.750\text{ m/s}

  3. Step 3

    savg=v1+v22=0.667+0.7502≈0.709 m/ss_{\text{avg}} = \frac{v_1 + v_2}{2} = \frac{0.667 + 0.750}{2} \approx 0.709\text{ m/s}

    Correct

    savg=dtotalΔttotal=1.200 m+0.600 m2.600 s=1.800 m2.600 s≈0.692 m/ss_{\text{avg}} = \frac{d_{\text{total}}}{\Delta t_{\text{total}}} = \frac{1.200\text{ m} + 0.600\text{ m}}{2.600\text{ s}} = \frac{1.800\text{ m}}{2.600\text{ s}} \approx 0.692\text{ m/s}

    You averaged the two segment speeds using a simple arithmetic mean. Because the cart spent different amounts of time on each segment (1.800 s1.800\text{ s} vs. 0.800 s0.800\text{ s}), a simple average weights them equally instead of according to time. Average speed is fundamentally defined as total distance divided by total time.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the initial and final positions to find net displacement and average velocity.

You correctly broke the motion into forward and return intervals and determined the distance and time for each.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Arithmetic Mean of Speeds

You took v1+v22\frac{v_1 + v_2}{2} instead of dividing the total path length by total elapsed time.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Treating average speed as an arithmetic mean of interval speeds rather than adhering to its primary definition savg=dtotalΔttotals_{\text{avg}} = \frac{d_{\text{total}}}{\Delta t_{\text{total}}}. An unweighted average of speeds is only valid when the time intervals for each leg are exactly equal.

REASONING PATH
Your ACEpath teacher’s suggested approach
Definition of Average Speed
  • Average speed is always scalar total distance divided by scalar total time: savg=∑di∑Δtis_{\text{avg}} = \frac{\sum d_i}{\sum \Delta t_i}.

  • Sum all individual segment distances first, sum all elapsed times, and then divide.

When Can Speeds Be Averaged Directly?
  • The arithmetic mean v1+v22\frac{v_1 + v_2}{2} equals average speed only if Δt1=Δt2\Delta t_1 = \Delta t_2.

  • Always default to savg=dtotalΔttotals_{\text{avg}} = \frac{d_{\text{total}}}{\Delta t_{\text{total}}} to avoid unequal-interval weighting errors.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Find total distance traveled: d=d1+d2=1.200 m+0.600 m=1.800 md = d_1 + d_2 = 1.200\text{ m} + 0.600\text{ m} = 1.800\text{ m}.

  2. Find total elapsed time: Δt=2.600 s\Delta t = 2.600\text{ s}.

  3. Divide total distance by total time: savg=1.800 m2.600 s≈0.692 m/ss_{\text{avg}} = \frac{1.800\text{ m}}{2.600\text{ s}} \approx 0.692\text{ m/s}.

Final answer

(a) vavg=+0.231 m/sv_{\text{avg}} = +0.231\text{ m/s}; (b) savg=0.692 m/ss_{\text{avg}} = 0.692\text{ m/s}

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that average speed is defined as total distance over total time, not as the average of speeds.

  • Practice multi-segment motion problems where legs have unequal time intervals.

Lock it in

Similar question

01

A runner on a straight track starts at x=0 mx = 0\text{ m}, sprints to the 100 m100\text{ m} mark in 12.0 s12.0\text{ s}, and immediately walks back to the 60 m60\text{ m} mark in another 8.0 s8.0\text{ s}. Find the runner's (a) average velocity and (b) average speed for the entire 20.0 s20.0\text{ s} interval.

Answer

(a) Δx=60 m−0 m=+60 m  ⟹  vavg=+60 m20.0 s=+3.0 m/s\Delta x = 60\text{ m} - 0\text{ m} = +60\text{ m} \implies v_{\text{avg}} = \frac{+60\text{ m}}{20.0\text{ s}} = +3.0\text{ m/s}. (b) Total distance d=100 m+40 m=140 m  ⟹  savg=140 m20.0 s=7.0 m/sd = 100\text{ m} + 40\text{ m} = 140\text{ m} \implies s_{\text{avg}} = \frac{140\text{ m}}{20.0\text{ s}} = 7.0\text{ m/s}.

02

A remote-controlled toy car moves along a straight line. It starts at x=1.5 mx = 1.5\text{ m}, travels forward to x=4.5 mx = 4.5\text{ m} in 3.0 s3.0\text{ s}, reverses to x=−0.5 mx = -0.5\text{ m} in 4.0 s4.0\text{ s}, and finally moves forward to x=1.5 mx = 1.5\text{ m} in 3.0 s3.0\text{ s}. Find the car's average velocity and average speed over the total 10.0 s10.0\text{ s}.

Answer

Net displacement Δx=1.5 m−1.5 m=0 m  ⟹  vavg=0.0 m/s\Delta x = 1.5\text{ m} - 1.5\text{ m} = 0\text{ m} \implies v_{\text{avg}} = 0.0\text{ m/s}. Total distance d=∣4.5−1.5∣+∣−0.5−4.5∣+∣1.5−(−0.5)∣=3.0+5.0+2.0=10.0 m  ⟹  savg=10.0 m10.0 s=1.0 m/sd = |4.5 - 1.5| + |-0.5 - 4.5| + |1.5 - (-0.5)| = 3.0 + 5.0 + 2.0 = 10.0\text{ m} \implies s_{\text{avg}} = \frac{10.0\text{ m}}{10.0\text{ s}} = 1.0\text{ m/s}.

03

A particle moves along the xx-axis with position given by x(t)=t3−6t2+9tx(t) = t^3 - 6t^2 + 9t (where xx is in meters and tt is in seconds) from t=0 st = 0\text{ s} to t=4 st = 4\text{ s}. Determine: (a) the turning points of the motion, (b) the average velocity, and (c) the average speed over the interval t∈[0,4]t \in [0, 4].

Answer

(a) Velocity v(t)=3t2−12t+9=3(t−1)(t−3)v(t) = 3t^2 - 12t + 9 = 3(t - 1)(t - 3). Reversals occur at t=1 st = 1\text{ s} (x=4 mx = 4\text{ m}) and t=3 st = 3\text{ s} (x=0 mx = 0\text{ m}). Positions: x(0)=0 mx(0) = 0\text{ m}, x(1)=4 mx(1) = 4\text{ m}, x(3)=0 mx(3) = 0\text{ m}, x(4)=4 mx(4) = 4\text{ m}. (b) Net displacement Δx=4 m−0 m=+4 m  ⟹  vavg=4 m4 s=+1.0 m/s\Delta x = 4\text{ m} - 0\text{ m} = +4\text{ m} \implies v_{\text{avg}} = \frac{4\text{ m}}{4\text{ s}} = +1.0\text{ m/s}. (c) Total distance d=∣4−0∣+∣0−4∣+∣4−0∣=4+4+4=12 m  ⟹  savg=12 m4 s=3.0 m/sd = |4 - 0| + |0 - 4| + |4 - 0| = 4 + 4 + 4 = 12\text{ m} \implies s_{\text{avg}} = \frac{12\text{ m}}{4\text{ s}} = 3.0\text{ m/s}.

Loading workspace…