Resources

A sealed cubical chamber with rigid walls of side length L=0.400 mL = 0.400\text{ m} contains N=8.00×1023N = 8.00 \times 10^{23} particles of an ideal gas at an absolute temperature of T=350 KT = 350\text{ K}. Microscopic kinetic theory dictates that macroscopic pressure arises from the collision rate of particles with the walls, where each collision perpendicular to a wall imparts an average normal impulse of 2mvx2mv_x. If the safety threshold for the container walls is an internal pressure of Pcrit=1.00×105 PaP_{\text{crit}} = 1.00 \times 10^5\text{ Pa}, determine: (a) the actual internal macroscopic pressure PP exerted by the microscopic particle impacts, and (b) whether the system exceeds the critical boundary PcritP_{\text{crit}}.

Answer and steps

Final answer

(a) P=6.04×104 PaP = 6.04 \times 10^4\text{ Pa}, (b) The system does not exceed the critical boundary (P<PcritP < P_{\text{crit}}, operating safely at 60.4%60.4\% of the critical threshold).

Steps

01

Calculate the Volume of the Container

The container is a cube with side length L=0.400 mL = 0.400\text{ m}. Its internal volume VV is:

V=L3=(0.400 m)3=0.0640 m3V = L^3 = (0.400\text{ m})^3 = 0.0640\text{ m}^3


02

Link Microscopic Impacts to Macroscopic Pressure

According to the kinetic theory of gases, individual gas particles collide elastically with the container walls. Each collision perpendicular to a wall transfers a normal momentum (impulse) of Δpx=2mvx\Delta p_x = 2mv_x. When summed over all NN particles moving randomly in three dimensions, this time-averaged force per unit area yields the ideal gas equation of state:

PV=NkBTP V = N k_B T

where:

  • N=8.00×1023N = 8.00 \times 10^{23} is the number of particles,
  • kB≈1.381×10−23 J/Kk_B \approx 1.381 \times 10^{-23}\text{ J/K} is the Boltzmann constant,
  • T=350 KT = 350\text{ K} is the absolute temperature,
  • V=0.0640 m3V = 0.0640\text{ m}^3 is the volume.

03

Determine the Internal Pressure PP

Rearranging the equation to solve for PP:

P=NkBTVP = \frac{N k_B T}{V}

Substitute the given values:

P=(8.00×1023)(1.381×10−23 J/K)(350 K)0.0640 m3P = \frac{(8.00 \times 10^{23})(1.381 \times 10^{-23}\text{ J/K})(350\text{ K})}{0.0640\text{ m}^3}

P=3866.8 J0.0640 m3≈6.04×104 PaP = \frac{3866.8\text{ J}}{0.0640\text{ m}^3} \approx 6.04 \times 10^4\text{ Pa}


04

Compare with the Critical Threshold

The safety limit of the container is:

Pcrit=1.00×105 PaP_{\text{crit}} = 1.00 \times 10^5\text{ Pa}

Comparing the operating pressure to the critical threshold:

P=6.04×104 Pa<1.00×105 PaP = 6.04 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa}

The percentage of the critical pressure reached is:

PPcrit×100%=6.04×104 Pa1.00×105 Pa×100%=60.4%\frac{P}{P_{\text{crit}}} \times 100\% = \frac{6.04 \times 10^4\text{ Pa}}{1.00 \times 10^5\text{ Pa}} \times 100\% = 60.4\%

Therefore, the system does not exceed the critical boundary and operates safely at 60.4%60.4\% of the critical threshold.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student confuses the particle count N with the number of moles n and misapplies the universal gas constant R instead of Boltzmann's constant k_B, resulting in a drastically overestimated pressure.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    V=L3=(0.400 m)3=0.0640 m3V = L^3 = (0.400\text{ m})^3 = 0.0640\text{ m}^3

  2. Step 2

    P=NRTV  ⟹  P=(8.00×1023×8.314×350)0.0640  ⟹  P=3.64×1028 PaP = \frac{NRT}{V} \implies P = \frac{(8.00 \times 10^{23} \times 8.314 \times 350)}{0.0640} \implies P = 3.64 \times 10^{28}\text{ Pa}

    Correct

    P=NkBTV=(8.00×1023)(1.381×10−23 J/K)(350 K)0.0640 m3≈6.04×104 PaP = \frac{Nk_BT}{V} = \frac{(8.00 \times 10^{23})(1.381 \times 10^{-23}\text{ J/K})(350\text{ K})}{0.0640\text{ m}^3} \approx 6.04 \times 10^4\text{ Pa}

    You used the universal gas constant R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)} directly with the particle count NN. When working with individual particles, the ideal gas equation of state is PV=NkBTPV = Nk_BT, where kB≈1.381×10−23 J/Kk_B \approx 1.381 \times 10^{-23}\text{ J/K}.

  3. Step 3

    3.64×1028 Pa>1.00×105 Pa  ⟹  The system exceeds the critical boundary.3.64 \times 10^{28}\text{ Pa} > 1.00 \times 10^5\text{ Pa} \implies \text{The system exceeds the critical boundary.}

    Correct

    P=6.04×104 Pa<1.00×105 Pa  ⟹  The system does not exceed the critical boundary.P = 6.04 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa} \implies \text{The system does not exceed the critical boundary.}

    Your comparison followed logically from your calculated pressure, but because the pressure was vastly overestimated in the previous step, your safety conclusion is reversed.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly computed the internal volume of the cubical container as V=0.0640 m3V = 0.0640\text{ m}^3.

You recognized that the ideal gas law links temperature, volume, quantity of gas, and pressure.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Gas Constant Mismatch ($R$ vs. $k_B$)

Using RR instead of kBk_B when given the total particle count NN.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Conflating macroscopic molar quantities with microscopic individual particle counts. The constant RR applies per mole of substance (PV=nRTPV = nRT), whereas Boltzmann's constant kB=R/NAk_B = R/N_A applies per individual particle (PV=NkBTPV = Nk_BT).

REASONING PATH
Your ACEpath teacher’s suggested approach
Particle Count vs. Mole Count
  • Use PV=NkBTPV = Nk_BT when given particle count NN; use PV=nRTPV = nRT when given amount of substance nn in moles.

  • Check whether the given quantity is dimensionless particle count NN or mole count nn before selecting the gas constant.

Order of Magnitude Sanity Check
  • Pressures of typical enclosed gases near room conditions generally range between 103 Pa10^3\text{ Pa} and 107 Pa10^7\text{ Pa}; pressures on the order of 1028 Pa10^{28}\text{ Pa} exceed the core of a star.

  • Inspect the exponent of your final numerical answer to verify that it represents a physically realistic pressure.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the ideal gas law in terms of particle count: P=NkBTVP = \frac{Nk_BT}{V}.

  2. Substitute N=8.00×1023N = 8.00 \times 10^{23}, kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}, T=350 KT = 350\text{ K}, and V=0.0640 m3V = 0.0640\text{ m}^3: P=(8.00×1023)(1.381×10−23)(350)0.0640≈6.04×104 PaP = \frac{(8.00 \times 10^{23})(1.381 \times 10^{-23})(350)}{0.0640} \approx 6.04 \times 10^4\text{ Pa}.

  3. Compare with Pcrit=1.00×105 PaP_{\text{crit}} = 1.00 \times 10^5\text{ Pa}: since 6.04×104 Pa<1.00×105 Pa6.04 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa}, the pressure is below the threshold.

Final answer

(a) P=6.04×104 PaP = 6.04 \times 10^4\text{ Pa}, (b) The system does not exceed the critical boundary (P<PcritP < P_{\text{crit}}).

NEXT STEPS
Final Takeaways from Your Teacher
  • Memorize the bridge equation R=NAkBR = N_A k_B to always pair nn with RR and NN with kBk_B.

  • Practice converting between particle count NN and moles n=N/NAn = N/N_A before computing thermodynamic state variables.

OverviewACEpath Teacher's Diagnosis

02 The student uses the surface area or side length squared instead of volume when calculating pressure, dividing the thermal energy by L² rather than L³.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    A=L2=(0.400 m)2=0.160 m2  ⟹  P=NkBTAA = L^2 = (0.400\text{ m})^2 = 0.160\text{ m}^2 \implies P = \frac{N k_B T}{A}

    Correct

    V=L3=(0.400 m)3=0.0640 m3  ⟹  P=NkBTVV = L^3 = (0.400\text{ m})^3 = 0.0640\text{ m}^3 \implies P = \frac{N k_B T}{V}

    The ideal gas equation linking microscopic kinetic energy to macroscopic pressure is PV=NkBTP V = N k_B T, which requires dividing by the chamber's three-dimensional volume V=L3V = L^3, not a single face's area A=L2A = L^2.

  2. Step 2

    P=8.00×1023×1.38×10−23×3500.160=38640.160=2.42×104 PaP = \frac{8.00 \times 10^{23} \times 1.38 \times 10^{-23} \times 350}{0.160} = \frac{3864}{0.160} = 2.42 \times 10^4\text{ Pa}

    Correct

    P=(8.00×1023)(1.381×10−23 J/K)(350 K)0.0640 m3≈6.04×104 PaP = \frac{(8.00 \times 10^{23})(1.381 \times 10^{-23}\text{ J/K})(350\text{ K})}{0.0640\text{ m}^3} \approx 6.04 \times 10^4\text{ Pa}

    Your arithmetic was carried out accurately, but substituting the surface area 0.160 m20.160\text{ m}^2 instead of the volume 0.0640 m30.0640\text{ m}^3 propagated an underestimated pressure.

  3. Step 3

    2.42×104 Pa<1.00×105 Pa  ⟹  The system does not exceed the critical boundary.2.42 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa} \implies \text{The system does not exceed the critical boundary.}

    Correct

    6.04×104 Pa<1.00×105 Pa  ⟹  The system does not exceed the critical boundary.6.04 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa} \implies \text{The system does not exceed the critical boundary.}

    Your comparison logic is sound and reaches the correct qualitative conclusion, but it relies on the incorrect pressure value from earlier steps.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that total thermal energy is governed by NkBTN k_B T.

You correctly substituted the values for particle count NN, temperature TT, and Boltzmann's constant kBk_B.

You performed the numerical division accurately and compared your calculated value to PcritP_{\text{crit}} logically.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Dimensionality confusion between volume and surface area in kinetic theory

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the macroscopic definition of pressure (P=F/AP = F/A) with the equation of state (P=NkBT/VP = N k_B T / V), causing you to divide thermal energy by face area L2L^2 rather than chamber volume L3L^3. Dividing energy (Joules) by area (m2\text{m}^2) yields surface energy density (N/m\text{N/m}), not pressure (N/m2\text{N/m}^2 or Pa\text{Pa}).

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Consistency of Pressure
  • Pressure has dimensions of energy per unit volume: [P]=Jm3=Nm2=Pa[P] = \frac{\text{J}}{\text{m}^3} = \frac{\text{N}}{\text{m}^2} = \text{Pa}.

  • Always verify that the denominator of an energy-to-pressure expression has units of volume (m3\text{m}^3), not area (m2\text{m}^2).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Calculate the volume of the cubical container: V=L3=(0.400 m)3=0.0640 m3V = L^3 = (0.400\text{ m})^3 = 0.0640\text{ m}^3.

  2. Solve the ideal gas equation of state for pressure: P=NkBTVP = \frac{N k_B T}{V}.

  3. Substitute the given values: P=(8.00×1023)(1.381×10−23 J/K)(350 K)0.0640 m3≈6.04×104 PaP = \frac{(8.00 \times 10^{23})(1.381 \times 10^{-23}\text{ J/K})(350\text{ K})}{0.0640\text{ m}^3} \approx 6.04 \times 10^4\text{ Pa}.

  4. Compare with Pcrit=1.00×105 PaP_{\text{crit}} = 1.00 \times 10^5\text{ Pa}: since 6.04×104 Pa<1.00×105 Pa6.04 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa}, the system remains safely below the threshold.

Final answer

(a) P=6.04×104 PaP = 6.04 \times 10^4\text{ Pa}, (b) The system does not exceed the critical boundary.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review the microscopic derivation of P=13NVmv2‾P = \frac{1}{3}\frac{N}{V}m\overline{v^2} to see how particle number density n=N/Vn = N/V governs wall collisions.

  • Check the units of your final formula before calculating: dividing energy by area gives force per unit length, whereas dividing energy by volume gives pressure.

OverviewACEpath Teacher's Diagnosis

03 The student miscalculates the volume by computing 6L² or 4L³ rather than L³, incorrectly using 6L³ = 0.384 m³ as the volume.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    V=6×L3=6×(0.400)3=0.384 m3V = 6 \times L^3 = 6 \times (0.400)^3 = 0.384\text{ m}^3

    Correct

    V=L3=(0.400 m)3=0.0640 m3V = L^3 = (0.400\text{ m})^3 = 0.0640\text{ m}^3

    The volume of a cube of side length LL is V=L3V = L^3. You multiplied by 66, likely confusing the 66 faces used in surface area (6L26L^2) with the volume formula.

  2. Step 2

    P=NkBTV=8.00×1023×1.38×10−23×3500.384=38640.384=10062.5 Pa≈1.01×104 PaP = \frac{N k_B T}{V} = \frac{8.00 \times 10^{23} \times 1.38 \times 10^{-23} \times 350}{0.384} = \frac{3864}{0.384} = 10062.5\text{ Pa} \approx 1.01 \times 10^4\text{ Pa}

    Correct

    P=NkBTV=(8.00×1023)(1.381×10−23 J/K)(350 K)0.0640 m3≈6.04×104 PaP = \frac{N k_B T}{V} = \frac{(8.00 \times 10^{23})(1.381 \times 10^{-23}\text{ J/K})(350\text{ K})}{0.0640\text{ m}^3} \approx 6.04 \times 10^4\text{ Pa}

    Your algebraic rearrangement of the ideal gas law and your numerical substitution were completely sound, but your result was affected by the incorrect volume carried over from Step 1.

  3. Step 3

    1.01×104 Pa<1.00×105 Pa  ⟹  1.01 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa} \implies The system does not exceed the critical boundary.

    Correct

    6.04×104 Pa<1.00×105 Pa  ⟹  6.04 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa} \implies The system does not exceed the critical boundary.

    Your comparison logic is correct, and your qualitative conclusion happens to agree with the correct answer, but it relies on an erroneous pressure value.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly selected the ideal gas relation PV=NkBTPV = N k_B T to connect microscopic particle count and temperature to macroscopic pressure.

You accurately calculated the product NkBTN k_B T in the numerator.

You correctly compared your calculated pressure to the critical threshold PcritP_{\text{crit}} to determine system safety.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Geometry Volume-Area Confusion

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You confused the geometric properties of a three-dimensional cube by attaching a factor of 66 (from total surface area A=6L2A = 6L^2) to the internal volume formula V=L3V = L^3.

REASONING PATH
Your ACEpath teacher’s suggested approach
Cube Geometry: Volume vs. Surface Area
  • For a cube of side length LL, the internal capacity or volume is V=L3V = L^3. The total surface area of all six faces is A=6L2A = 6L^2. A cube's volume never includes a factor of 66.

  • Always verify units and geometry before substituting: volume has units of m3\text{m}^3 and represents three-dimensional space (L×L×LL \times L \times L), while area has units of m2\text{m}^2.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. V=L3=(0.400 m)3=0.0640 m3V = L^3 = (0.400\text{ m})^3 = 0.0640\text{ m}^3

  2. P=NkBTV=(8.00×1023)(1.381×10−23 J/K)(350 K)0.0640 m3=3866.8 J0.0640 m3≈6.04×104 PaP = \frac{N k_B T}{V} = \frac{(8.00 \times 10^{23})(1.381 \times 10^{-23}\text{ J/K})(350\text{ K})}{0.0640\text{ m}^3} = \frac{3866.8\text{ J}}{0.0640\text{ m}^3} \approx 6.04 \times 10^4\text{ Pa}

  3. 6.04×104 Pa<1.00×105 Pa6.04 \times 10^4\text{ Pa} < 1.00 \times 10^5\text{ Pa}

Final answer

(a) P=6.04×104 PaP = 6.04 \times 10^4\text{ Pa}, (b) The system does not exceed the critical boundary.

NEXT STEPS
Final Takeaways from Your Teacher
  • Review standard three-dimensional geometric formulas for prisms, cylinders, and spheres to keep volumes and surface areas distinct.

  • Re-solve the pressure calculation using V=0.0640 m3V = 0.0640\text{ m}^3 to confirm that P=6.04×104 PaP = 6.04 \times 10^4\text{ Pa}.

Lock it in

Similar question

01

A rigid container of volume V=0.0250 m3V = 0.0250\text{ m}^3 contains N=3.00×1023N = 3.00 \times 10^{23} argon atoms at an absolute temperature T=290 KT = 290\text{ K}. Calculate the internal pressure PP exerted on the walls. (Use kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}.)

Answer

P=NkBTV=(3.00×1023)(1.381×10−23 J/K)(290 K)0.0250 m3≈4.81×104 PaP = \frac{Nk_BT}{V} = \frac{(3.00 \times 10^{23})(1.381 \times 10^{-23}\text{ J/K})(290\text{ K})}{0.0250\text{ m}^3} \approx 4.81 \times 10^4\text{ Pa}.

02

A cylinder holds n=1.50 moln = 1.50\text{ mol} of helium gas at T=400 KT = 400\text{ K} in a volume of V=0.0500 m3V = 0.0500\text{ m}^3. (a) Calculate the pressure using the molar ideal gas law. (b) Find the total particle count NN and verify that P=NkBTVP = \frac{Nk_BT}{V} gives the exact same pressure. (Use R=8.314 J/(mol⋅K)R = 8.314\text{ J/(mol}\cdot\text{K)}, NA=6.022×1023 mol−1N_A = 6.022 \times 10^{23}\text{ mol}^{-1}, kB=1.381×10−23 J/Kk_B = 1.381 \times 10^{-23}\text{ J/K}.)

Answer

(a) P=nRTV=(1.50)(8.314)(400)0.0500=9.98×104 PaP = \frac{nRT}{V} = \frac{(1.50)(8.314)(400)}{0.0500} = 9.98 \times 10^4\text{ Pa}. (b) N=nNA=(1.50)(6.022×1023)=9.033×1023N = n N_A = (1.50)(6.022 \times 10^{23}) = 9.033 \times 10^{23} particles. Then P=(9.033×1023)(1.381×10−23)(400)0.0500≈9.98×104 PaP = \frac{(9.033 \times 10^{23})(1.381 \times 10^{-23})(400)}{0.0500} \approx 9.98 \times 10^4\text{ Pa}, matching part (a).

03

A spherical vessel of radius r=0.200 mr = 0.200\text{ m} contains an ideal gas at T=320 KT = 320\text{ K} and an internal pressure of P=1.50×105 PaP = 1.50 \times 10^5\text{ Pa}. Determine: (a) the volume of the vessel, (b) the total number of gas molecules NN, and (c) the amount of gas in moles nn.

Answer

(a) V=43πr3=43π(0.200 m)3≈0.03351 m3V = \frac{4}{3}\pi r^3 = \frac{4}{3}\pi (0.200\text{ m})^3 \approx 0.03351\text{ m}^3. (b) N=PVkBT=(1.50×105 Pa)(0.03351 m3)(1.381×10−23 J/K)(320 K)≈1.14×1024N = \frac{PV}{k_BT} = \frac{(1.50 \times 10^5\text{ Pa})(0.03351\text{ m}^3)}{(1.381 \times 10^{-23}\text{ J/K})(320\text{ K})} \approx 1.14 \times 10^{24} molecules. (c) n=NNA=1.14×10246.022×1023 mol−1≈1.89 moln = \frac{N}{N_A} = \frac{1.14 \times 10^{24}}{6.022 \times 10^{23}\text{ mol}^{-1}} \approx 1.89\text{ mol} (or via n=PVRT=(1.50×105)(0.03351)(8.314)(320)≈1.89 moln = \frac{PV}{RT} = \frac{(1.50 \times 10^5)(0.03351)}{(8.314)(320)} \approx 1.89\text{ mol}).

Loading workspace…