Resources

A wind turbine blade rotates at a rotational frequency of f=14.5 rpmf = 14.5\text{ rpm}. The total blade span (radius) is given in English engineering units as L=175 ftL = 175\text{ ft}. Using the exact conversion factors 1 ft=0.3048 m1\text{ ft} = 0.3048\text{ m} and 1 mi=1609.34 m1\text{ mi} = 1609.34\text{ m}: (a) Convert the rotational frequency to angular speed ω\omega in standard SI units (rad/s\text{rad/s}). (b) Calculate the linear tangential speed vv of the blade tip in meters per second (m/s\text{m/s}). (c) Convert this blade tip speed into miles per hour (mph\text{mph}). Round all answers to three significant figures.

Answer and steps

Final answer

(a) ω=1.52 rad/s\omega = 1.52\text{ rad/s}; (b) v=81.0 m/sv = 81.0\text{ m/s}; (c) v=181 mphv = 181\text{ mph}

Steps

Part (a): Convert Rotational Frequency to Angular Speed (ω\omega)

The blade's rotational frequency is given in revolutions per minute (rpm\text{rpm}). One full revolution corresponds to an angle of 2π radians2\pi\text{ radians}, and one minute equals 60 seconds60\text{ seconds}.

Using the conversion formula from rpm\text{rpm} to radians per second:

ω=f⋅2π rad1 rev⋅1 min60 s\omega = f \cdot \frac{2\pi\text{ rad}}{1\text{ rev}} \cdot \frac{1\text{ min}}{60\text{ s}}

Substitute the given value f=14.5 rpmf = 14.5\text{ rpm}:

ω=14.5⋅2π60=29π60≈1.5184 rad/s\omega = 14.5 \cdot \frac{2\pi}{60} = \frac{29\pi}{60} \approx 1.5184\text{ rad/s}

Rounded to three significant figures: ω≈1.52 rad/s\omega \approx 1.52\text{ rad/s}


Part (b): Calculate the Linear Tangential Speed (vv)

The linear tangential speed vv of a point moving in a circular path is related to the angular speed ω\omega and the radius rr by:

v=rωv = r\omega

First, convert the turbine blade length (radius rr) from feet into meters using the exact conversion factor 1 ft=0.3048 m1\text{ ft} = 0.3048\text{ m}:

r=175 ft⋅0.3048 m/ft=53.34 mr = 175\text{ ft} \cdot 0.3048\text{ m/ft} = 53.34\text{ m}

Now, compute the linear speed using the unrounded value of ω\omega:

v=(53.34 m)⋅(1.5184 rad/s)≈80.993 m/sv = (53.34\text{ m}) \cdot (1.5184\text{ rad/s}) \approx 80.993\text{ m/s}

Rounded to three significant figures: v≈81.0 m/sv \approx 81.0\text{ m/s}

Common Pitfall: Using the rounded intermediate value of ω=1.52 rad/s\omega = 1.52\text{ rad/s} can introduce rounding errors in later steps. Always carry extra digits during intermediate calculations and round only at the final step.


Part (c): Convert the Tip Speed to Miles per Hour (mph\text{mph})

To convert speed from meters per second to miles per hour, use the relations 1 hr=3600 s1\text{ hr} = 3600\text{ s} and 1 mi=1609.34 m1\text{ mi} = 1609.34\text{ m}:

v=80.993 m/s⋅3600 s1 hr⋅1 mi1609.34 mv = 80.993\text{ m/s} \cdot \frac{3600\text{ s}}{1\text{ hr}} \cdot \frac{1\text{ mi}}{1609.34\text{ m}}

v≈2915751609.34≈181.18 mphv \approx \frac{291575}{1609.34} \approx 181.18\text{ mph}

Rounded to three significant figures: v≈181 mphv \approx 181\text{ mph}

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to multiply by 2π when converting revolutions per minute to radians per second, confusing revolutions per second with radians per second and leading to an angular speed of 0.242 rad/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    ω=14.560=0.242 rad/s\omega = \frac{14.5}{60} = 0.242\text{ rad/s}

    Correct

    ω=14.5 rpm⋅2π rad1 rev⋅1 min60 s≈1.52 rad/s\omega = 14.5\text{ rpm} \cdot \frac{2\pi\text{ rad}}{1\text{ rev}} \cdot \frac{1\text{ min}}{60\text{ s}} \approx 1.52\text{ rad/s}

    You converted revolutions per minute to revolutions per second by dividing by 6060, but you did not multiply by 2π2\pi to convert revolutions to radians.

  2. Step 2

    r=175×0.3048=53.34 m  ⟹  v=rω=53.34×0.2417=12.9 m/sr = 175 \times 0.3048 = 53.34\text{ m} \implies v = r\omega = 53.34 \times 0.2417 = 12.9\text{ m/s}

    Correct

    r=175 ft⋅0.3048 m/ft=53.34 m  ⟹  v=rω=53.34 m⋅1.5184 rad/s≈81.0 m/sr = 175\text{ ft} \cdot 0.3048\text{ m/ft} = 53.34\text{ m} \implies v = r\omega = 53.34\text{ m} \cdot 1.5184\text{ rad/s} \approx 81.0\text{ m/s}

    Your radius conversion and formula v=rωv = r\omega are completely correct, but the numerical answer is affected by using the incorrect angular speed from part (a).

  3. Step 3

    v=12.89×(36001609.34)=28.8 mphv = 12.89 \times \left(\frac{3600}{1609.34}\right) = 28.8\text{ mph}

    Correct

    v=80.993 m/s⋅3600 s1 hr⋅1 mi1609.34 m≈181 mphv = 80.993\text{ m/s} \cdot \frac{3600\text{ s}}{1\text{ hr}} \cdot \frac{1\text{ mi}}{1609.34\text{ m}} \approx 181\text{ mph}

    Your unit conversion setup from meters per second to miles per hour is correct, but the resulting value is affected by the earlier error.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly converted the blade radius from feet to meters using the given conversion factor.

You correctly identified and applied the linear-to-angular speed relation v=rωv = r\omega.

You used an accurate conversion ratio to convert speed from m/s\text{m/s} to mph\text{mph}.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Missing conversion factor

Dividing rpm by 60 calculates revolutions per second (frequency ff), not radians per second (angular speed ω\omega).

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You conflated rotational frequency (ff in rev/s) with angular speed (ω\omega in rad/s), omitting the identity 1 revolution=2π radians1\text{ revolution} = 2\pi\text{ radians}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Converting rpm to rad/s
  • ω=2πfrpm60\omega = \frac{2\pi f_{\text{rpm}}}{60}

  • Always multiply the number of revolutions by 2π2\pi whenever an angular formula requires radians.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. ω=14.5⋅2π60=29π60≈1.5184 rad/s≈1.52 rad/s\omega = 14.5 \cdot \frac{2\pi}{60} = \frac{29\pi}{60} \approx 1.5184\text{ rad/s} \approx 1.52\text{ rad/s}

  2. v=rω=(53.34 m)(1.5184 rad/s)≈80.993 m/s≈81.0 m/sv = r\omega = (53.34\text{ m})(1.5184\text{ rad/s}) \approx 80.993\text{ m/s} \approx 81.0\text{ m/s}

  3. v=80.993⋅36001609.34≈181.18 mph≈181 mphv = 80.993 \cdot \frac{3600}{1609.34} \approx 181.18\text{ mph} \approx 181\text{ mph}

Final answer

(a) ω=1.52 rad/s\omega = 1.52\text{ rad/s}; (b) v=81.0 m/sv = 81.0\text{ m/s}; (c) v=181 mphv = 181\text{ mph}

NEXT STEPS
Final Takeaways from Your Teacher
  • Write out dimensional units explicitly during conversion steps: revmin⋅2π rad1 rev⋅1 min60 s\frac{\text{rev}}{\text{min}} \cdot \frac{2\pi\text{ rad}}{1\text{ rev}} \cdot \frac{1\text{ min}}{60\text{ s}}.

  • Check that formulas relating rotational to linear quantities (v=ωrv = \omega r, ac=ω2ra_c = \omega^2 r) always take ω\omega in radians per unit time.

OverviewACEpath Teacher's Diagnosis

02 The student fails to convert the radius from feet to meters, calculating the linear speed directly with feet and obtaining an incorrect speed of 266 m/s.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=14.5×2π60=1.52 rad/s\omega = 14.5 \times \frac{2\pi}{60} = 1.52\text{ rad/s}

  2. Step 2

    v=rω=175×1.518=266 m/sv = r\omega = 175 \times 1.518 = 266\text{ m/s}

    Correct

    r=175 ft⋅0.3048 m/ft=53.34 m  ⟹  v=(53.34 m)(1.5184 rad/s)≈81.0 m/sr = 175\text{ ft} \cdot 0.3048\text{ m/ft} = 53.34\text{ m} \implies v = (53.34\text{ m})(1.5184\text{ rad/s}) \approx 81.0\text{ m/s}

    You substituted the blade length in feet (175 ft175\text{ ft}) directly into the formula v=rωv = r\omega. Because the length was in feet, the resulting value was 266 ft/s266\text{ ft/s} rather than meters per second.

  3. Step 3

    v=265.7×(36001609.34)=594 mphv = 265.7 \times \left(\frac{3600}{1609.34}\right) = 594\text{ mph}

    Correct

    v=80.993 m/s⋅3600 s/hr1609.34 m/mi≈181 mphv = 80.993\text{ m/s} \cdot \frac{3600\text{ s/hr}}{1609.34\text{ m/mi}} \approx 181\text{ mph}

    Your conversion ratio from m/s\text{m/s} to mph\text{mph} is set up correctly, but your calculation inherited the incorrect speed value from part (b).

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the conversion factor 2π60\frac{2\pi}{60} to find angular velocity ω\omega.

You correctly recognized and applied the relationship v=rωv = r\omega.

You correctly constructed the ratio 36001609.34\frac{3600}{1609.34} to convert meters per second into miles per hour.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Unit Conversion Omission

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You forgot to harmonize units into standard SI before evaluating the tangential velocity formula, treating a radius given in feet as if it were already in meters.

REASONING PATH
Your ACEpath teacher’s suggested approach
Unit Consistency Check
  • In the formula v=rωv = r\omega, if ω\omega is in rad/s\text{rad/s} and vv is desired in m/s\text{m/s}, the radius rr must be expressed in meters.

  • Always convert non-standard units (such as feet or inches) into meters before multiplying by ω\omega.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Convert the blade length to meters: r=175 ft×0.3048 m/ft=53.34 mr = 175\text{ ft} \times 0.3048\text{ m/ft} = 53.34\text{ m}.

  2. Calculate tangential speed: v=rω=(53.34 m)(1.5184 rad/s)≈80.99 m/sv = r\omega = (53.34\text{ m})(1.5184\text{ rad/s}) \approx 80.99\text{ m/s}, which rounds to 81.0 m/s81.0\text{ m/s}.

  3. Convert to mph\text{mph}: v=80.993×36001609.34≈181 mphv = 80.993 \times \frac{3600}{1609.34} \approx 181\text{ mph}.

Final answer

(a) ω=1.52 rad/s\omega = 1.52\text{ rad/s}; (b) v=81.0 m/sv = 81.0\text{ m/s}; (c) v=181 mphv = 181\text{ mph}

NEXT STEPS
Final Takeaways from Your Teacher
  • Practice identifying the units of each variable in rotation equations before performing multiplications.

  • Write out explicit unit labels alongside each number during your scratch work to catch mismatched units immediately.

OverviewACEpath Teacher's Diagnosis

03 The student divides by 3600 instead of multiplying by 3600 when converting seconds to hours in part (c), resulting in a speed of 0.0000140 mph.

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    ω=14.5×2π60=1.52 rad/s\omega = 14.5 \times \frac{2\pi}{60} = 1.52\text{ rad/s}

  2. Step 2

    r=175×0.3048=53.34 m  ⟹  v=rω=53.34×1.518=81.0 m/sr = 175 \times 0.3048 = 53.34\text{ m} \implies v = r\omega = 53.34 \times 1.518 = 81.0\text{ m/s}

  3. Step 3

    v=81.01609.34×3600=0.0000140 mphv = \frac{81.0}{1609.34 \times 3600} = 0.0000140\text{ mph}

    Correct

    v=81.0 m/s×1 mi1609.34 m×3600 s1 hr≈181 mphv = 81.0\text{ m/s} \times \frac{1\text{ mi}}{1609.34\text{ m}} \times \frac{3600\text{ s}}{1\text{ hr}} \approx 181\text{ mph}

    Because seconds are already in the denominator of m/s\text{m/s}, converting to per hour requires multiplying by 3600 s/hr3600\text{ s/hr} so that seconds cancel out in the numerator and denominator.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the conversion factor 2π rad60 s\frac{2\pi\text{ rad}}{60\text{ s}} to convert rpm into rad/s.

You correctly converted the blade radius from feet to meters.

You accurately applied the relationship v=rωv = r\omega to find the linear tip speed.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Inverted Conversion Factor in Compound Units

You divided by 36003600 instead of multiplying by 36003600 when converting a unit with time in the denominator.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

When performing dimensional analysis on compound units (such as m/s\text{m/s}), units located in the denominator cancel when multiplied by a conversion factor having that unit in the numerator: ms×3600 s1 hr=3600 m/hr\frac{\text{m}}{\text{s}} \times \frac{3600\text{ s}}{1\text{ hr}} = 3600\text{ m/hr}.

REASONING PATH
Your ACEpath teacher’s suggested approach
Dimensional Cancellation Rule
  • To cancel a unit in the denominator, place that unit in the numerator of the conversion factor: 1s×shr=1hr\frac{1}{\text{s}} \times \frac{\text{s}}{\text{hr}} = \frac{1}{\text{hr}}.

  • Write out full conversion fractions with their unit labels to verify that units cancel diagonally.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Write the unit conversion showing units cancelling: v=80.993 m/s×1 mi1609.34 m×3600 s1 hrv = 80.993\text{ m/s} \times \frac{1\text{ mi}}{1609.34\text{ m}} \times \frac{3600\text{ s}}{1\text{ hr}}.

  2. Multiply the numerators and divide by the denominators: v=80.993×36001609.34≈181.18 mphv = \frac{80.993 \times 3600}{1609.34} \approx 181.18\text{ mph}.

  3. Round the final result to three significant figures.

Final answer

v≈181 mphv \approx 181\text{ mph}

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write out complete unit labels in fraction form during multi-step conversions.

  • Perform a sanity check on speeds: a turbine tip moving at 81 m/s81\text{ m/s} covers roughly the length of a football field in one second, so its speed in mph must be a large value, not a tiny fraction.

Lock it in

Similar question

01

A compact disc rotates at 300 rpm300\text{ rpm}. Calculate its angular speed ω\omega in rad/s\text{rad/s}, rounded to three significant figures.

Answer

ω=300⋅2π60=10π≈31.4 rad/s\omega = 300 \cdot \frac{2\pi}{60} = 10\pi \approx 31.4\text{ rad/s}.

02

A bicycle wheel of radius 0.35 m0.35\text{ m} turns at an angular rate of 120 rpm120\text{ rpm}. Find the tangential speed of the tire tread in m/s\text{m/s}. Round to three significant figures.

Answer

First convert angular speed: ω=120⋅2π60=4π≈12.57 rad/s\omega = 120 \cdot \frac{2\pi}{60} = 4\pi \approx 12.57\text{ rad/s}. Then calculate linear speed: v=rω=(0.35 m)(12.57 rad/s)≈4.40 m/sv = r\omega = (0.35\text{ m})(12.57\text{ rad/s}) \approx 4.40\text{ m/s}.

03

A helicopter main rotor blade has a length of 24.0 ft24.0\text{ ft}. It rotates at a steady rate of 450 rpm450\text{ rpm}. Using 1 ft=0.3048 m1\text{ ft} = 0.3048\text{ m}, find the speed of the blade tip in m/s\text{m/s}. Round to three significant figures.

Answer

Convert radius: r=24.0×0.3048=7.3152 mr = 24.0 \times 0.3048 = 7.3152\text{ m}. Convert angular speed: ω=450⋅2π60=15π≈47.124 rad/s\omega = 450 \cdot \frac{2\pi}{60} = 15\pi \approx 47.124\text{ rad/s}. Compute tip speed: v=rω=(7.3152 m)(47.124 rad/s)≈345 m/sv = r\omega = (7.3152\text{ m})(47.124\text{ rad/s}) \approx 345\text{ m/s}.

Loading workspace…