Resources

An unpolarized light beam with an initial intensity of I0=420 W/m2I_0 = 420\text{ W/m}^2 is incident upon a sequence of two ideal linear polarizers. The transmission axis of the first polarizer is oriented vertically, and the transmission axis of the second polarizer is oriented at an angle of θ=35.0∘\theta = 35.0^\circ relative to the vertical. Calculate the intensity of the light emerging from the second polarizer, in W/m2\text{W/m}^2.

Answer and steps

Final answer

141 W/m2141\text{ W/m}^2

Steps

01

Transmission through the first polarizer

To find the final intensity of the light beam, we trace the polarization state and intensity through each polarizer in sequence.

An ideal linear polarizer placed in the path of unpolarized light transmits only the component of the electric field aligned with its transmission axis. Since the electric field vectors in unpolarized light are randomly and uniformly distributed in all transverse directions, the average value of the transmitted intensity is half of the incident intensity:

I1=12I0I_1 = \frac{1}{2}I_0

Substitute the initial intensity I0=420 W/m2I_0 = 420\text{ W/m}^2:

I1=12⋅420 W/m2=210 W/m2I_1 = \frac{1}{2} \cdot 420\text{ W/m}^2 = 210\text{ W/m}^2

The light emerging from this first polarizer is completely linearly polarized along the vertical axis.

02

Transmission through the second polarizer (Malus's Law)

When already-polarized light of intensity I1I_1 strikes a second polarizer whose transmission axis forms an angle θ\theta with the light's direction of polarization, the transmitted intensity is governed by Malus's Law:

I2=I1cos⁡2θI_2 = I_1 \cos^2\theta

Here, the light is polarized vertically, and the transmission axis of the second polarizer is tilted at θ=35.0∘\theta = 35.0^\circ relative to the vertical. Thus, the angle between the polarization direction and the axis is directly θ=35.0∘\theta = 35.0^\circ:

cos⁡(35.0∘)≈0.8192\cos(35.0^\circ) \approx 0.8192

cos⁡2(35.0∘)≈(0.8192)2≈0.6710\cos^2(35.0^\circ) \approx (0.8192)^2 \approx 0.6710

03

Calculate the final transmitted intensity

Multiply I1I_1 by cos⁡2(35.0∘)\cos^2(35.0^\circ):

I2=210 W/m2⋅0.6710≈140.91 W/m2I_2 = 210\text{ W/m}^2 \cdot 0.6710 \approx 140.91\text{ W/m}^2

Rounding to three significant figures gives:

I2=141 W/m2I_2 = 141\text{ W/m}^2

Common Pitfall: Do not apply Malus's Law directly to the original unpolarized beam (I0cos⁡2θI_0 \cos^2\theta). Malus's Law only applies to light that is already linearly polarized. The first polarizer always cuts unpolarized light's intensity by half regardless of its orientation.

Typical errors

OverviewACEpath Teacher's Diagnosis

01 The student forgets to apply the one-half rule for unpolarized light incident on the first polarizer and applies Malus's law directly to the initial intensity, obtaining 282 W/m².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    I=I0cos⁡2(θ)  ⟹  I=420×cos⁡2(35.0∘)I = I_0 \cos^2(\theta) \implies I = 420 \times \cos^2(35.0^\circ)

    Correct

    I1=12I0=12(420 W/m2)=210 W/m2I_1 = \frac{1}{2}I_0 = \frac{1}{2}(420\text{ W/m}^2) = 210\text{ W/m}^2

    The initial beam is unpolarized. An ideal linear polarizer always transmits exactly half of incident unpolarized light (I1=12I0I_1 = \frac{1}{2}I_0). Malus's law only applies to light that is already linearly polarized when it encounters a subsequent polarizer.

  2. Step 2

    cos⁡(35.0∘)≈0.8192  ⟹  I=420×0.6710  ⟹  I=281.8 W/m2\cos(35.0^\circ) \approx 0.8192 \implies I = 420 \times 0.6710 \implies I = 281.8\text{ W/m}^2

    Correct

    I2=I1cos⁡2(35.0∘)=210×0.6710≈141 W/m2I_2 = I_1 \cos^2(35.0^\circ) = 210 \times 0.6710 \approx 141\text{ W/m}^2

    Your trigonometric evaluation was accurate, but using I0=420 W/m2I_0 = 420\text{ W/m}^2 instead of I1=210 W/m2I_1 = 210\text{ W/m}^2 doubled your final intensity.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recalled that the transmitted intensity through an angled polarizer depends on cos⁡2(θ)\cos^2(\theta).

You accurately evaluated cos⁡(35.0∘)\cos(35.0^\circ) and squared it to obtain 0.67100.6710.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omission of One-Half Rule for Unpolarized Light

no

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You applied Malus's law (I=I0cos⁡2θI = I_0 \cos^2\theta) across the entire two-polarizer system at once, overlooking that Malus's law requires incident light to already be linearly polarized. When completely unpolarized light encounters the first polarizer, its intensity is reduced by the one-half rule (I1=12I0I_1 = \frac{1}{2}I_0) regardless of the polarizer's orientation.

REASONING PATH
Your ACEpath teacher’s suggested approach
Identify Initial Polarization State
  • Unpolarized light incident on an ideal linear polarizer always emerges with intensity I1=12I0I_1 = \frac{1}{2}I_0.

  • Check whether the incoming beam is unpolarized or already polarized before writing down any intensity equation.

Apply Malus's Law Only Between Polarizers
  • Malus's law I=Iinccos⁡2θI = I_{\text{inc}} \cos^2\theta applies only when polarized light passes through a polarizer whose transmission axis is at angle θ\theta relative to the incoming polarization plane.

  • Use the transmitted intensity from the first polarizer (I1I_1) as the incident intensity for the second polarizer (I2=I1cos⁡2θI_2 = I_1 \cos^2\theta).

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Identify that the first polarizer transmits unpolarized light according to the one-half rule: I1=12I0=12(420 W/m2)=210 W/m2I_1 = \frac{1}{2}I_0 = \frac{1}{2}(420\text{ W/m}^2) = 210\text{ W/m}^2.

  2. Apply Malus's law to the second polarizer using I1I_1 as the incident intensity: I2=I1cos⁡2(35.0∘)I_2 = I_1 \cos^2(35.0^\circ).

  3. Multiply 210 W/m2210\text{ W/m}^2 by cos⁡2(35.0∘)≈0.6710\cos^2(35.0^\circ) \approx 0.6710 to find I2≈140.91 W/m2I_2 \approx 140.91\text{ W/m}^2.

Final answer

141 W/m2141\text{ W/m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Always write down the intensity after each optical element one at a time rather than combining them into a single equation.

  • Practice distinguishing problems where incident light is unpolarized from those where the light is already polarized.

OverviewACEpath Teacher's Diagnosis

02 The student forgets to square the cosine term in Malus's law, calculating I₂ = I₁ cos(θ) instead of I₁ cos²(θ), which results in 172 W/m².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Partially correct
  1. Step 1

    I1=I02=4202=210 W/m2I_1 = \frac{I_0}{2} = \frac{420}{2} = 210\text{ W/m}^2

  2. Step 2

    I2=I1cos⁡(θ)  ⟹  I2=210×cos⁡(35.0∘)  ⟹  I2=210×0.8192I_2 = I_1 \cos(\theta) \implies I_2 = 210 \times \cos(35.0^\circ) \implies I_2 = 210 \times 0.8192

    Correct

    I2=I1cos⁡2(θ)=210×cos⁡2(35.0∘)≈210×0.6710I_2 = I_1 \cos^2(\theta) = 210 \times \cos^2(35.0^\circ) \approx 210 \times 0.6710

    Malus's Law relates transmitted intensity to the incident polarized intensity via cos⁡2θ\cos^2\theta, not cos⁡θ\cos\theta. While the transmitted electric field amplitude depends linearly on cos⁡θ\cos\theta, intensity is proportional to the square of the electric field amplitude.

  3. Step 3

    I2=172.0 W/m2I_2 = 172.0\text{ W/m}^2

    Correct

    I2≈141 W/m2I_2 \approx 141\text{ W/m}^2

    This numerical result directly follows from omitting the exponent in Malus's Law.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly recognized that initially unpolarized light transmits with half its incident intensity through the first polarizer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Omitted square on cosine in Malus's Law

You used I2=I1cos⁡θI_2 = I_1 \cos\theta instead of I2=I1cos⁡2θI_2 = I_1 \cos^2\theta.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

Confusing the transmission of electric field amplitude (E=E0cos⁡θE = E_0 \cos\theta) with wave intensity (I∝E2I \propto E^2), which requires squaring the cosine term in Malus's Law.

REASONING PATH
Your ACEpath teacher’s suggested approach
Field vs. Intensity
  • Intensity is proportional to the square of the electric field amplitude: I∝E2I \propto E^2.

  • Whenever you calculate light intensity through a tilted polarizer, always square the projection factor: cos⁡2θ\cos^2\theta.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Apply Malus's Law with the squared cosine: I2=I1cos⁡2(35.0∘)I_2 = I_1 \cos^2(35.0^\circ).

  2. Evaluate cos⁡2(35.0∘)=(0.81915...)2≈0.67101\cos^2(35.0^\circ) = (0.81915...)^2 \approx 0.67101.

  3. Multiply by I1I_1: I2=210 W/m2×0.67101≈140.91 W/m2I_2 = 210\text{ W/m}^2 \times 0.67101 \approx 140.91\text{ W/m}^2.

Final answer

141 W/m2141\text{ W/m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Remember that wave intensity always scales with amplitude squared, so Malus's Law requires cos⁡2θ\cos^2\theta.

  • Double-check your unit analysis and formulas before computing numerical products.

OverviewACEpath Teacher's Diagnosis

03 The student evaluates the trigonometric function using radian mode instead of degree mode, yielding an unphysical or incorrect transmitted intensity of 84.4 W/m².

Sample Student Work

Reviewed by ACEpath Teacher
Step-by-Step Review
Walk Through It with Your Teacher
Incorrect
  1. Step 1

    I1=I02=210 W/m2I_1 = \frac{I_0}{2} = 210\text{ W/m}^2

  2. Step 2

    I2=I1cos⁡2(35.0∘)I_2 = I_1 \cos^2(35.0^\circ)

  3. Step 3

    cos⁡(35.0)≈−0.6341  ⟹  cos⁡2(35.0)≈0.4021\cos(35.0) \approx -0.6341 \implies \cos^2(35.0) \approx 0.4021

    Correct

    cos⁡(35.0∘)≈0.8192  ⟹  cos⁡2(35.0∘)≈0.6710\cos(35.0^\circ) \approx 0.8192 \implies \cos^2(35.0^\circ) \approx 0.6710

    You evaluated cos⁡(35.0∘)\cos(35.0^\circ) as −0.6341-0.6341, which is incorrect. An acute angle between 0∘0^\circ and 90∘90^\circ must have a positive cosine; this error typically occurs when entering the value incorrectly or using an incorrect calculator mode.

  4. Step 4

    I2=210×0.4021  ⟹  I2=84.4 W/m2I_2 = 210 \times 0.4021 \implies I_2 = 84.4\text{ W/m}^2

    Correct

    I2=210 W/m2×0.6710≈141 W/m2I_2 = 210\text{ W/m}^2 \times 0.6710 \approx 141\text{ W/m}^2

    Your multiplication correctly follows your previous squared cosine value, but the final numerical answer is incorrect due to the trigonometric error in the preceding step.

WHAT YOU DID WELL
Compliments from Your Teacher

You correctly used the half-intensity rule to find the intensity after the first polarizer.

You correctly identified and applied Malus's Law for the second polarizer.

THE ERROR
Where Your ACEpath Teacher Spotted the Mistake
Trigonometric evaluation error

You recorded cos⁡(35.0∘)≈−0.6341\cos(35.0^\circ) \approx -0.6341 instead of +0.8192+0.8192, producing an erroneous transmission factor.

WHY IT HAPPENED
ACEpath Teacher's Diagnosis

You likely miskeyed the angle or had your calculator in an unintended mode, failing to sanity-check that the cosine of an acute angle in the first quadrant must always be strictly positive.

REASONING PATH
Your ACEpath teacher’s suggested approach
Check Angle Mode
  • Whenever an angle is given in degrees (such as 35.0∘35.0^\circ), ensure your calculator is set to DEG mode or explicitly type the degree symbol.

  • Verify your calculator's active angle unit before calculating trigonometric ratios.

Quadrant Sanity Check
  • For any acute angle 0∘<θ<90∘0^\circ < \theta < 90^\circ, cos⁡θ\cos\theta must be between 00 and 11.

  • If your calculator returns a negative value for an acute angle, stop immediately and re-evaluate.

CORRECTED PATH
ACEpath Teacher's Demonstration
  1. Evaluate cos⁡(35.0∘)\cos(35.0^\circ) in degree mode: cos⁡(35.0∘)≈0.81915\cos(35.0^\circ) \approx 0.81915.

  2. Square the cosine factor: cos⁡2(35.0∘)≈(0.81915)2≈0.67101\cos^2(35.0^\circ) \approx (0.81915)^2 \approx 0.67101.

  3. Multiply by the incident polarized intensity: I2=210 W/m2×0.67101≈140.91 W/m2I_2 = 210\text{ W/m}^2 \times 0.67101 \approx 140.91\text{ W/m}^2.

Final answer

141 W/m2141\text{ W/m}^2

NEXT STEPS
Final Takeaways from Your Teacher
  • Double-check your calculator mode (DEG vs. RAD) before evaluating trigonometric expressions in physics problems.

  • Practice checking intermediate signs: acute angles in optics must always yield positive transmission coefficients.

Lock it in

Similar question

01

An unpolarized laser beam with an intensity of 180 W/m2180\text{ W/m}^2 passes through an ideal linear polarizer whose transmission axis is oriented horizontally. What is the intensity and polarization state of the light immediately after exiting this polarizer?

Answer

The intensity is I1=12I0=12(180 W/m2)=90 W/m2I_1 = \frac{1}{2}I_0 = \frac{1}{2}(180\text{ W/m}^2) = 90\text{ W/m}^2. The emerging light is completely linearly polarized along the horizontal direction.

02

Unpolarized light of intensity I0=320 W/m2I_0 = 320\text{ W/m}^2 is incident on a pair of polarizing sheets. The first sheet has a vertical transmission axis, and the second sheet's axis makes an angle of 45.0∘45.0^\circ with the vertical. Calculate the intensity of the light emerging from the second sheet.

Answer

After the first sheet, I1=12I0=160 W/m2I_1 = \frac{1}{2}I_0 = 160\text{ W/m}^2. After the second sheet, I2=I1cos⁡2(45.0∘)=160 W/m2×(22)2=160×0.500=80 W/m2I_2 = I_1 \cos^2(45.0^\circ) = 160\text{ W/m}^2 \times \left(\frac{\sqrt{2}}{2}\right)^2 = 160 \times 0.500 = 80\text{ W/m}^2.

03

An unpolarized light beam of intensity I0=500 W/m2I_0 = 500\text{ W/m}^2 passes through three successive ideal polarizers. Polarizer 1 is vertical (0∘0^\circ), Polarizer 2 is at 30.0∘30.0^\circ relative to the vertical, and Polarizer 3 is at 90.0∘90.0^\circ relative to the vertical (horizontal). Calculate the intensity of light emerging from the third polarizer.

Answer

After Polarizer 1: I1=12(500)=250 W/m2I_1 = \frac{1}{2}(500) = 250\text{ W/m}^2. Between Polarizer 1 and 2, the angle is Δθ1=30.0∘\Delta\theta_1 = 30.0^\circ, so I2=250cos⁡2(30.0∘)=250×34=187.5 W/m2I_2 = 250 \cos^2(30.0^\circ) = 250 \times \frac{3}{4} = 187.5\text{ W/m}^2. Between Polarizer 2 and 3, the relative angle is Δθ2=90.0∘−30.0∘=60.0∘\Delta\theta_2 = 90.0^\circ - 30.0^\circ = 60.0^\circ, so I3=187.5cos⁡2(60.0∘)=187.5×14=46.875 W/m2≈46.9 W/m2I_3 = 187.5 \cos^2(60.0^\circ) = 187.5 \times \frac{1}{4} = 46.875\text{ W/m}^2 \approx 46.9\text{ W/m}^2.

Loading workspace…